- 26 Sep, 2006 40 commits
-
-
Magnus Damm authored
The different cpu_dev structures are all used from __cpuinit callers what I can tell. So mark them as __cpuinitdata instead of __initdata. I am a little bit unsure about arch/i386/common.c:default_cpu, especially when it comes to the purpose of this_cpu. Signed-off-by:
Magnus Damm <magnus@valinux.co.jp> Signed-off-by:
Andi Kleen <ak@suse.de>
-
Magnus Damm authored
The init_amd() function is only called from identify_cpu() which is already marked as __cpuinit. So let's mark it as __cpuinit. Signed-off-by:
-
Magnus Damm authored
cpu_dev->c_identify is only called from arch/i386/common.c:identify_cpu(), and this after generic_identify() already has been called. There is no need to call this function twice and hook it in c_identify - but I may be wrong, please double check before applying. This patch also removes generic_identify() from cpu.h to avoid unnecessary future nesting. Signed-off-by:
-
Keith Mannthey authored
Fix for the x86_64 kernel mapping code. Without this patch the update path only inits one pmd_page worth of memory and tramples any entries on it. now the calling convention to phys_pmd_init and phys_init is to always pass a [pmd/pud] page not an offset within a page. Signed-off-by: Keith Mannthey<kmannth@us.ibm.com> Signed-off-by:
Andrew Morton <akpm@osdl.org>
-
Andrew Morton authored
Implement pause_on_oops() on x86_64. AK: I redid the patch to do the oops_enter/exit in the existing oops_begin()/end(). This makes it much shorter. Signed-off-by:
-
Arjan van de Ven authored
Right now the kernel on x86-64 has a 100% lazy fpu behavior: after *every* context switch a trap is taken for the first FPU use to restore the FPU context lazily. This is of course great for applications that have very sporadic or no FPU use (since then you avoid doing the expensive save/restore all the time). However for very frequent FPU users... you take an extra trap every context switch. The patch below adds a simple heuristic to this code: After 5 consecutive context switches of FPU use, the lazy behavior is disabled and the context gets restored every context switch. If the app indeed uses the FPU, the trap is avoided. (the chance of the 6th time slice using FPU after the previous 5 having done so are quite high obviously). After 256 switches, this is reset and lazy behavior is returned (until there are 5 consecutive ones again). The reason for this is to give apps that do longer bursts of FPU use still the lazy behavior back after some time. [akpm@osdl.org: place new task_struct field next to jit_keyring to save space] Signed-off-by:
Arjan van de Ven <arjan@linux.intel.com> Signed-off-by:
-
Ashok Raj authored
This patch enables ACPI based physical CPU hotplug support for x86_64. Implements acpi_map_lsapic() and acpi_unmap_lsapic() to support physical cpu hotplug. Signed-off-by:
Ashok Raj <ashok.raj@intel.com> Signed-off-by:
-
Brice Goglin authored
Make an mmconfig warning print the bus id with a regular format. Signed-off-by:
Brice Goglin <brice@myri.com> Signed-off-by:
-
Magnus Damm authored
cyrix_identify() should be __init because transmeta_identify() is. tsc_init() is only called from setup_arch() which is marked as __init. These two section mismatches have been detected using running modpost on a vmlinux image compiled with CONFIG_RELOCATABLE=y. Signed-off-by:
-
Magnus Damm authored
There is no need to duplicate the topology_init() function. Signed-off-by:
-
Eric W. Biederman authored
Now for a completely different but trivial approach. I just boot tested it with 255 CPUS and everything worked. Currently everything (except module data) we place in the per cpu area we know about at compile time. So instead of allocating a fixed size for the per_cpu area allocate the number of bytes we need plus a fixed constant for to be used for modules. It isn't perfect but it is much less of a pain to work with than what we are doing now. AK: fixed warning Signed-off-by:
Eric W. Biederman <ebiederm@xmission.com> Signed-off-by:
-
Rusty Russell authored
The implementation comes from Zach's [RFC, PATCH 10/24] i386 Vmi descriptor changes: Descriptor and trap table cleanups. Add cleanly written accessors for IDT and GDT gates so the subarch may override them. Note that this allows the hypervisor to transparently tweak the DPL of the descriptors as well as the RPL of segments in those descriptors, with no unnecessary kernel code modification. It also allows the hypervisor implementation of the VMI to tweak the gates, allowing for custom exception frames or extra layers of indirection above the guest fault / IRQ handlers. Signed-off-by:
Zachary Amsden <zach@vmware.com> Signed-off-by:
Rusty Russell <rusty@rustcorp.com.au> Signed-off-by:
-
Andi Kleen authored
And add proper CFI annotation to it which was previously impossible. This prevents "stuck" messages by the dwarf2 unwinder when reaching the top of a kernel stack. Includes feedback from Jan Beulich Cc: jbeulich@novell.com Signed-off-by: -
Adrian Bunk authored
enable_local_apic can now become static. Cc: len.brown@intel.com Signed-off-by:
Adrian Bunk <bunk@stusta.de> Signed-off-by:
-
Adrian Bunk authored
acpi_force can become static. Cc: len.brown@intel.com Signed-off-by:
-
Andi Kleen authored
It's needed for external debuggers and overhead is very small. Also make the actual notifier chain they use static Cc: jbeulich@novell.com Signed-off-by: -
Andi Kleen authored
It's needed for external debuggers and overhead is very small. Also make the actual notifier chain they use static Cc: jbeulich@novell.com Signed-off-by: -
Andi Kleen authored
Fix linux/arch/i386/kernel/mpparse.c: In function #MP_bus_info#: linux/arch/i386/kernel/mpparse.c:232: warning: comparison is always false due to limited range of data type Signed-off-by: -
Andi Kleen authored
Since it's all zero. Actually I think gcc 4+ will do that automatically, but earlier compilers won't Signed-off-by: -
Andi Kleen authored
Improve Kconfig description of CONFIG_CRASH_DUMP. Previously it was too brief to be useful. Cc: vgoyal@in.ibm.com Cc: ebiederm@xmission.com Signed-off-by: -
Dimitri Sivanich authored
I've noticed some erratic behavior while testing the X86_64 version of monotonic_clock(). While spinning in a loop reading monotonic clock values (pinned to a single cpu) I noticed that the difference between subsequent values occasionally went negative (time going backwards). I found that in the following code: this_offset = get_cycles_sync(); /* FIXME: 1000 or 1000000? */ --> offset = (this_offset - last_offset)*1000 / cpu_khz; } return base + offset; the offset sometimes turns out to be 0, even though this_offset > last_offset. +Added fix From: Toyo Abe <toyoa@mvista.com> The x86_64-mm-monotonic-clock.patch in 2.6.18-rc4-mm2 made a change to the updating of monotonic_base. It now uses cycles_2_ns(). I suggest that a set_cyc2ns_scale() should be done prior to the setup_irq(). Because cycles_2_ns() can be called from the timer ISR right after the irq0 is enabled. Signed-off-by:Toyo Abe <toyoa@mvista.com> Signed-off-by:
Dimitri Sivanich <sivanich@sgi.com> Signed-off-by:
-
Prasanna S.P authored
This patch moves the entry.S:error_entry to .kprobes.text section, since code marked unsafe for kprobes jumps directly to entry.S::error_entry, that must be marked unsafe as well. This patch also moves all the ".previous.text" asm directives to ".previous" for kprobes section. AK: Following a similar i386 patch from Chuck Ebbert AK: Also merged Jeremy's fix in. +From: Jeremy Fitzhardinge <jeremy@goop.org> KPROBE_ENTRY does a .section .kprobes.text, and expects its users to do a .previous at the end of the function. Unfortunately, if any code within the function switches sections, for example .fixup, then the .previous ends up putting all subsequent code into .fixup. Worse, any subsequent .fixup code gets intermingled with the code its supposed to be fixing (which is also in .fixup). It's surprising this didn't cause more havok. The fix is to use .pushsection/.popsection, so this stuff nests properly. A further cleanup would be to get rid of all .section/.previous pairs, since they're inherently fragile. +From: Chuck Ebbert <76306.1226@compuserve.com> Because code marked unsafe for kprobes jumps directly to entry.S::error_code, that must be marked unsafe as well. The easiest way to do that is to move the page fault entry point to just before error_code and let it inherit the same section. Also moved all the ".previous" asm directives for kprobes sections to column 1 and removed ".text" from them. Signed-off-by:
Chuck Ebbert <76306.1226@compuserve.com> Signed-off-by:
-
Dave Jones authored
We have a test that looks for invalid pairings of certain athlon/durons that weren't designed for SMP, and taint accordingly (with 'S') if we find such a configuration. However, this test shouldn't fire if there's only a single CPU present. It's perfectly valid for an SMP kernel to boot on UP hardware for example. AK: changed to num_possible_cpus() Signed-off-by:
Dave Jones <davej@redhat.com> Signed-off-by:
-
Jeremy Fitzhardinge authored
Fix a very dubious piece of code in arch/i386/kernel/cpu/common.c:cpu_init(). This clears out %fs and %gs, but clobbers %eax in the process without telling gcc. It turns out that gcc happens to be not using %eax at that point anyway so it doesn't matter much, but it looks like a bomb waiting to go off. This does end up saving an instruction, because gcc wants %eax==0 for the set_debugreg()s below. Signed-off-by:
Jeremy Fitzhardinge <jeremy@goop.org> Signed-off-by:
-
Andi Kleen authored
Now that stacktrace supports dwarf2 don't force frame pointers for lockdep anymore Cc: mingo@elte.hu Signed-off-by: -
Andi Kleen authored
Cc: jbeulich@novell.com Signed-off-by: -
Andi Kleen authored
Cc: jbeulich@novell.com Signed-off-by: -
Andi Kleen authored
Following x86-64 patches. Reuses code from them in fact. Convert the standard backtracer to do all output using callbacks. Use the x86-64 stack tracer implementation that uses these callbacks to implement the stacktrace interface. This allows to use the new dwarf2 unwinder for stacktrace and get better backtraces. Cc: mingo@elte.hu Signed-off-by: -
Andi Kleen authored
Signed-off-by: -
Andi Kleen authored
This unifies the standard backtracer and the new stacktrace in memory backtracer. The standard one is converted to use callbacks and then reimplement stacktrace using new callbacks. The main advantage is that stacktrace can now use the new dwarf2 unwinder and avoid false positives in many cases. I kept it simple to make sure the standard backtracer stays reliable. Cc: mingo@elte.hu Signed-off-by: -
Andi Kleen authored
Needed for use of the unwinder in lockdep, because lockdep runs really early too. Cc: jbeulich@novell.com Signed-off-by: -
Andi Kleen authored
Lockdep can call the dwarf2 unwinder early, and the dwarf2 code uses safe_smp_processor_id which tries to access the local APIC page. But that doesn't work before the APIC code has set up its fixmap. Check for this case and always return boot cpu then. Cc: jbeulich@novell.com Cc: mingo@elte.hu Signed-off-by: -
Andi Kleen authored
The new dwarf2 unwinder needs to take locks to do backtraces inside modules. This patch makes sure lockdep which calls stacktrace is not reentered. Thanks to Ingo for suggesting this simpler approach. Cc: mingo@elte.hu Signed-off-by: -
Andi Kleen authored
- Remove unused all_contexts parameter No caller used it - Move skip argument into the structure (needed for followon patches) Cc: mingo@elte.hu Signed-off-by: -
Muli Ben-Yehuda authored
Signed-off-by:
Muli Ben-Yehuda <muli@il.ibm.com> Signed-off-by:
Jon Mason <jdmason@us.ibm.com> Signed-off-by:
-
Muli Ben-Yehuda authored
tce_cache_blast_stress was useful during bringup to stress the IOMMU's cache flushing. Now that we quiesce DMAs on every cache flush, using _stress() brings the machine down to its knees once you put it under load. Remove this debug / bringup code that isn't useful anymore completely. Signed-off-by:
-
Muli Ben-Yehuda authored
Introduce new function verify_bit_range(). Define two versions, one for CONFIG_IOMMU_DEBUG enabled and one for disabled. Previously we were checking that the bitmap was consistent every time we allocated or freed an entry in the TCE table, which is good for debugging but incurs an unnecessary penalty on non debug builds. Signed-off-by:
-
Muli Ben-Yehuda authored
Signed-off-by:
-
Chuck Ebbert authored
is_at_popf() needs to test for the iret instruction as well as popf. So add that test and rename it to is_setting_trap_flag(). Also change max insn length from 16 to 15 to match reality. LAHF / SAHF can't affect TF, so the comment in x86_64 is removed. Signed-off-by:
-
Andi Kleen authored
And move one into proto.h Cc: len.brown@intel.com Signed-off-by:
-
