Remove all the unsed members from the private data for the ni mio drivers.

The ao0p and ao1p members are only used in the ni_ao_reset() function and
the code is commented out. Remove them, and the commented out code, as well.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This macro is used to create the private data structure that is used by
the ni_atmio, ni_mio_cs, and ni_pcimio drivers. These drivers all include
the ni_mio_common.c source to provide most of the driver functionality.

The only driver specific information needed to convert the macro into a
proper struct definition is the MAX_N_CALDACS define. This define is used
to size a couple array members in the struct. The ni_atmio and ni_mio_cs
drivers both define MAX_N_CALDACS as 32. The ni_pcimio driver defines it
as (16+16+2). The ni_mio_common file only uses this define to sanity check
that the struct members are large enough for the number of channels in
the calibration subdevice.

Move the MAX_N_CALDACS define to ni_stc.h and set it to the largest number
of caldacs (34).

The ni_atmio and ni_mio_cs drivers also add one additional member to the
private data struct before using the NI_PRIVATE_COMMON macro.

For the ni_atmio driver, the struct pnp_dev pointer can be saved in the
comedi_device as the 'hw_dev'. The (*detach) of this driver can then use
to_pnp_dev() to get it back when detaching the pnp device.

In the ni_mio_cs driver, the struct pcmia_device pointer is not used so
it can simply be removed.

The NI_PRIVATE_COMMON macro can then be converted into a proper struct
definition.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Add an (*insn_config) to the counter subdevice to allow the user to select
the clock source for the counters using the INSN_CONFIG_SET_CLOCK_SRC
instruction. The current selection can be queried with the instruction
INSN_CONFIG_GET_CLOCK_SRC.

Also, handle the INSN_CONFIG_RESET instruction to reset all the counters.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The functions pci9111_trigger_source_set(), pci9111_pretrigger_set(),
and pci9111_autoscan_set() are all used to select the A/D trigger type.
They all do a read/mask/set/write of the A/D Trigger Mode Control register.

Simplify the code by removing these helper functions and combining all
the trigger bits so that a single write can be used to set the register.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This define is only used in the pci_device_id table and doesn't add
any additional clarity to the code. Remove the define and just open
code the value.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This define is only used in a comedi_error() message. The addition of
the driver name to the message is not necessary. Remove the define.

For aesthetics, convert the comedi_error() into a dev_dbg().
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The Diamond Systems ONYX-MM-DIO board is a PC/104 module with two 8255
chips providing 48 digital I/O channels.

This board can be supported by the pcl724 driver.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The Diamond Systems IR104-PBF board is a PC/104 module with 20
optoisolated inputs and 20 relay outputs.

This board can be supported by the pcl730 driver.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregk@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

These defines don't add any additional clarity to the addi_data drivers.
Just remove them.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

These macros don't add any additional clarity to the addi_data drivers.
Just remove them.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

These defines don't add any additional clarity to the addi_data drivers.
Just remove them.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

These defines don't add any additional clarity to the addi_data drivers.
They are also only used in the addi_apci_3120 driver. Just remove them.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This define is not used. Remove it.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This member is set but never used. Just remove it.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Reformat the comment describing this comedi driver to use the usual
block comment format.

Also remove reference to digital I/O emulating an 8255, because it
doesn't, and remove "DIO only" from the "Description:" line as it also
supports analog inputs.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Cleanup the existing defines and add some missing bit defines.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

For aesthetics, add some whitespace to the subdevice init.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This driver does not support async commands so the len_chanlist init is
unnecessary. Remove it and allow the core to default the value to '1'.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This define is only used in the comedi_request_region() call to
specify the I/O resource size. Remove it and just open code the
value.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This member of the private data is only used during the attach to
determine if there are 8 differential or 16 single-ended analog
inputs. Remove the member and use the comedi_devconfig option
directly.

Also, fix the subdev_flags when differential analog inputs are used.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This member of the private data is only used during the attach to
determine which range table to use for the analog inputs. Remove
the member and use the comedi_devconfig option directly.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

For aesthetics, rename this function.

Clean up the local variables by reusing 'val' instead of using
separate variables for the:
  'status' - use once to trigger the first A/D conversion
  'hi' and 'lo' - used to read the A/D conversion result

For aesthetics, change the final return to insn->n and remove the
comment.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This driver only updates the ctreg (ai channel/range) register if the
desired channel or range has changed since the last analog input read
operation. It does this becuase the hardware requires an udelay to
allow the multiplexor to settle. Unfortunatly the current code never
updates the 'last_channel' and 'last_range' in the private data so
the ctreg gets updated every time.

Fix this and simplify it a bit by just storing the last ctreg value
in the private data.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The (*insn_read) functions are supposed to "read" insn->n data values and
return the number of values read.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The (*insn_write) functions are supposed to write insn->n data values and
return the number of values written. For this subdevice it only makes sense
to write the last data value.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Absorb the helper functions that handle the INSN_CONFIG_SET_CLOCK_SRC and
INSN_CONFIG_GET_CLOCK_SRC comedi instructions.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The (*attach) in ni_E_init() sets the dev->write_subdev to the analog
output subdevice. Use that instead of accessing the dev->subdevices
array directly.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The (*attach) in ni_E_init() sets the dev->read_subdev to the analog
input subdevice. Use that instead of accessing the dev->subdevices
array directly.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This source file is included by the ni_atmio, ni_mio_cs, and ni_pcmio
drivers to support the common hardware on National Instruments DAQ-STC
based boards.

The only functions actually used by the external source files are
ni_E_interrupt(), ni_alloc_private(), ni_E_init(), and mio_common_detach().
The rest of the functions in this file are only used locally.

For aesthetics, move all the externally called functions to the end of
the file.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

I have not determined if the code in these functions is actually
usable. For now just move the disabled code closer to the working
gpct functions.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Move some functions to remove the need for the remaining forward declarations.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Move ni_set_master_clock() and its helper functions to remove the need
for the forward declaration.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Move ni_rtsi_insn_config() and its helper functions to remove the need
for the forward declaration.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Move ni_rtsi_init() to remove the need for the forward declaration.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Move ni_ai_insn_read() to remove the need for a forward declaration.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Move ni_E_interrupt() to remove the need for some forward declarations.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Move ni_ai_drain_dma() to remove the need for the forward declaration.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Move the get_last_sample_*() helpers to remove the need for the forward
declarations.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Move ni_ai_insn_config() to remove the need for a forward declaration.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Move ni_ai_inttrig() to remove the need for the forward declaration.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>