- 03 Feb, 2012 8 commits
-
-
Kuninori Morimoto authored
This patch modify fsi_pio_get_area() parameter to use struct fsi_stream, and used it on fsi_fifo_data_ctrl(). This is just prepare cleanup for DMAEngine support. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
Kuninori Morimoto authored
This is preparation for DMAEngine support Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
Kuninori Morimoto authored
This is preparation for DMAEngine support Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
Kuninori Morimoto authored
fsi_fifo_init() is called only from fsi_hw_startup() Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
Kuninori Morimoto authored
This is preparation for DMAEngine support Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
Kuninori Morimoto authored
Next transfer data size of "push" and "pop" had calculated on shared function. But it was not readable code. This patch divided it into for push, and for pop. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
Kuninori Morimoto authored
This patch gathered fsi_stream_xxx() functions in order to make it readable. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
Kuninori Morimoto authored
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
- 02 Feb, 2012 3 commits
-
-
Leon Romanovsky authored
All DAPM routes are configured via device tree, and there is no need in DAPM route structures in board file. Signed-off-by: Leon Romanovsky <leon@leon.nu> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
Leon Romanovsky authored
This patch is adding device tree support of headset autodetection on PAZ00 board. Signed-off-by: Leon Romanovsky <leon@leon.nu> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
Mark Brown authored
Use the standard logging macros and use dev_ variants where we can, also reporting error codes whenever we report an error. These changes (the error codes in particular) make it noticeably easier to figure out what went wrong just from the basic dmesg output. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
-
- 01 Feb, 2012 9 commits
-
-
Axel Lin authored
Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
Axel Lin authored
Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
Lars-Peter Clausen authored
Use the dai_link's dai_fmt attribute to setup the DAI format instead of doing this manually. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
Mark Brown authored
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
Mark Brown authored
I don't think it's been updated since the driver was merged. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
Mark Brown authored
If we get an indeterminate impedance with both headset polarities then give up and report the accessory as a headphone rather than continually retrying. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
Mark Brown authored
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
Mark Brown authored
Nice code saving. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
Mark Brown authored
A reasonable amount of new development is causing fiddly merge conflicts between different resource management changes (mostly fixing bugs in resource management due to noticing things while doing enhancements in the same area). Linux 3.3-rc2 .. several days delayed. No reason, I just didn't think of it.
-
- 31 Jan, 2012 12 commits
-
-
Linus Torvalds authored
-
Leon Romanovsky authored
Document device tree binding for the tegra board with ALC5632 codec according to datasheet functional block description. Signed-off-by: Leon Romanovsky <leon@leon.nu> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
Leon Romanovsky authored
Document the device tree binding for the ALC5632 codec and update vendor specific prefix for the Realtek. Signed-off-by: Leon Romanovsky <leon@leon.nu> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
Leon Romanovsky authored
This patch implements device tree support for Tegra boards with ALC5632 codec. Signed-off-by: Leon Romanovsky <leon@leon.nu> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
Mark Brown authored
For later wm_hubs devices we have much less need to keep the biases up even when using single ended line outputs so flag idle_bias_off for everything except the WM8993 and WM8994. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
Mark Brown authored
Use the same pm_ops for all system suspend and resume paths. This isn't ideal for suspend to disk with older CODECs as we'll suspend and then resume the CODEC before powering off all of which takes a long time due to VMID ramps but it's very simple to implement and for modern CODECs the overhead should be minimal. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
-
git://github.com/prasad-joshi/logfs_upstreamLinus Torvalds authored
There are few important bug fixes for LogFS * tag 'for-linus' of git://github.com/prasad-joshi/logfs_upstream: Logfs: Allow NULL block_isbad() methods logfs: Grow inode in delete path logfs: Free areas before calling generic_shutdown_super() logfs: remove useless BUG_ON MAINTAINERS: Add Prasad Joshi in LogFS maintiners logfs: Propagate page parameter to __logfs_write_inode logfs: set superblock shutdown flag after generic sb shutdown logfs: take write mutex lock during fsync and sync logfs: Prevent memory corruption logfs: update page reference count for pined pages Fix up conflict in fs/logfs/dev_mtd.c due to semantic change in what "mtd->block_isbad" means in commit f2933e86: "Logfs: Allow NULL block_isbad() methods" clashing with the abstraction changes in the commits 7086c19d: "mtd: introduce mtd_block_isbad interface" and d58b27ed: "logfs: do not use 'mtd->block_isbad' directly". This resolution takes the semantics from commit f2933e86, and just makes mtd_block_isbad() return zero (false) if the 'block_isbad' function is NULL. But that also means that now "mtd_can_have_bb()" always returns 0. Now, "mtd_block_markbad()" will obviously return an error if the low-level driver doesn't support bad blocks, so this is somewhat non-symmetric, but it actually makes sense if a NULL "block_isbad" function is considered to mean "I assume that all my blocks are always good".
-
Mark Brown authored
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
Mark Brown authored
The runtime PM core no longer requires any callbacks so don't provide empty ones for it any more. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
Mark Brown authored
The Mute Switch should be called Playback Switch to match the volume and the regmap core has been updated so we don't need to mark all the registers as non-volatile. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Wolfram Sang <w.sang@pengutronix.de>
-
Linus Torvalds authored
Merge branch 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging * 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (w83627ehf) Disable setting DC mode for pwm2, pwm3 on NCT6776F hwmon: (sht15) fix bad error code MAINTAINERS: Drop maintainer for MAX1668 hwmon driver MAINTAINERS: Add hwmon entries for Wolfson hwmon: (f71805f) Fix clamping of temperature limits
-
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrlLinus Torvalds authored
Here are some fixes to the pin control system that has accumulated since -rc1. Mainly Tony Lindgren fixed the module load/unload logic and the rest are minor fixes and documentation. * 'for-torvalds' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: pinctrl: add checks for empty function names pinctrl: fix pinmux_hog_maps when ctrl_dev_name is not set pinctrl: fix some pinmux typos pinctrl: free debugfs entries when unloading a pinmux driver pinctrl: unbreak error messages Documentation/pinctrl: fix a few syntax errors in code examples pinctrl: fix pinconf_pins_show iteration
-
- 30 Jan, 2012 8 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/ttyLinus Torvalds authored
Here are some tty/serial patches for 3.3-rc1 Big thing here is the movement of the 8250 serial drivers to their own directory, now that the patch churn has calmed down. Other than that, only minor stuff (omap patches were reverted as they were found to be wrong), and another broken driver removed from the system. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> * tag 'tty-3.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: serial: Kill off Moorestown code Revert "tty: serial: OMAP: ensure FIFO levels are set correctly in non-DMA mode" Revert "tty: serial: OMAP: transmit FIFO threshold interrupts don't wake the chip" serial: Fix wakeup init logic to speed up startup docbook: don't use serial_core.h in device-drivers book serial: amba-pl011: lock console writes against interrupts amba-pl011: do not disable RTS during shutdown tty: serial: OMAP: transmit FIFO threshold interrupts don't wake the chip tty: serial: OMAP: ensure FIFO levels are set correctly in non-DMA mode omap-serial: make serial_omap_restore_context depend on CONFIG_PM_RUNTIME omap-serial :Make the suspend/resume functions depend on CONFIG_PM_SLEEP. TTY: fix UV serial console regression jsm: Fixed EEH recovery error Updated TTY MAINTAINERS info serial: group all the 8250 related code together
-
Wolfram Sang authored
Add a driver supporting the volume control and the mute pin. Shdn pin and DAPM are not taken care of yet. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usbLinus Torvalds authored
Here are a bunch of USB patches for 3.3-rc1. Nothing major, largest thing here is the removal of some drivers that did not work at all. Other than that, the normal collection of bugfixes and new device ids. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> * tag 'usb-3.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (52 commits) uwb & wusb: fix kconfig error USB: Realtek cr: fix autopm scheduling while atomic USB: ftdi_sio: Add more identifiers xHCI: Cleanup isoc transfer ring when TD length mismatch found usb: musb: omap2430: minor cleanups. qcaux: add more Pantech UML190 and UML290 ports Revert "drivers: usb: Fix dependency for USB_HWA_HCD" usb: mv-otg - Fix build if CONFIG_USB is not set USB: cdc-wdm: Avoid hanging on interface with no USB_CDC_DMM_TYPE usb: add support for STA2X11 host driver drivers: usb: Fix dependency for USB_HWA_HCD kernel-doc: fix new warning in usb.h USB: OHCI: fix new compiler warnings usb: serial: kobil_sct: fix compile warning: drivers/usb/host/ehci-fsl.c: add missing iounmap USB: cdc-wdm: better allocate a buffer that is at least as big as we tell the USB core USB: cdc-wdm: call wake_up_all to allow driver to shutdown on device removal USB: cdc-wdm: use two mutexes to allow simultaneous read and write USB: cdc-wdm: updating desc->length must be protected by spin_lock USB: usbsevseg: fix max length ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
1) Setting link attributes can modify the size of the attributes that would be reported on a subsequent getlink netlink operation, therefore min_ifinfo_dump_size needs to be adjusted. From Stefan Gula. 2) Resegmentation of TSO frames while trimming can violate invariants expected by callers, namely that the number of segments can only stay the same or decrease, never increase. If MSS changes, however, we can trim data but then end up with more segments. Fix this by only segmenting to the MSS already recorded in the SKB. That's the simplest fix for now and if we want to get more fancy in the future that's a more involved change. This probably explains some retransmit counter inaccuracies. From Neal Cardwell. 3) Fix too-many-wakeups in POLL with AF_UNIX sockets, from Eric Dumazet. 4) Fix CAIF crashes wrt. namespace handling. From Eric Dumazet and Eric W. Biederman. 5) TCP port selection fixes from Flavio Leitner. 6) More socket memory cgroup build fixes in certain randonfig situations. From Glauber Costa. 7) Fix TCP memory sysctl regression reported by Ingo Molnar, also from Glauber Costa. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: af_unix: fix EPOLLET regression for stream sockets tcp: fix tcp_trim_head() to adjust segment count with skb MSS net/tcp: Fix tcp memory limits initialization when !CONFIG_SYSCTL net caif: Register properly as a pernet subsystem. netns: Fail conspicously if someone uses net_generic at an inappropriate time. net: explicitly add jump_label.h header to sock.h net: RTNETLINK adjusting values of min_ifinfo_dump_size ipv6: Fix ip_gre lockless xmits. xen-netfront: correct MAX_TX_TARGET calculation. netns: fix net_alloc_generic() tcp: bind() optimize port allocation tcp: bind() fix autoselection to share ports l2tp: l2tp_ip - fix possible oops on packet receive iwlwifi: fix PCI-E transport "inta" race mac80211: set bss_conf.idle when vif is connected mac80211: update oper_channel on ibss join
-
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulatorLinus Torvalds authored
This fixes an integration issue with the regulator device tree bindings which shook out in -rc. The bindings were overly enthusiatic when deciding to set a voltage on a regulator and would try to set zero volts on an unconfigured regulator which isn't supported. * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: regulator: Set apply_uV only when min and max voltages are defined
-
Eric Dumazet authored
Commit 0884d7aa (AF_UNIX: Fix poll blocking problem when reading from a stream socket) added a regression for epoll() in Edge Triggered mode (EPOLLET) Appropriate fix is to use skb_peek()/skb_unlink() instead of skb_dequeue(), and only call skb_unlink() when skb is fully consumed. This remove the need to requeue a partial skb into sk_receive_queue head and the extra sk->sk_data_ready() calls that added the regression. This is safe because once skb is given to sk_receive_queue, it is not modified by a writer, and readers are serialized by u->readlock mutex. This also reduce number of spinlock acquisition for small reads or MSG_PEEK users so should improve overall performance. Reported-by: Nick Mathewson <nickm@freehaven.net> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Cc: Alexey Moiseytsev <himeraster@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Neal Cardwell authored
This commit fixes tcp_trim_head() to recalculate the number of segments in the skb with the skb's existing MSS, so trimming the head causes the skb segment count to be monotonically non-increasing - it should stay the same or go down, but not increase. Previously tcp_trim_head() used the current MSS of the connection. But if there was a decrease in MSS between original transmission and ACK (e.g. due to PMTUD), this could cause tcp_trim_head() to counter-intuitively increase the segment count when trimming bytes off the head of an skb. This violated assumptions in tcp_tso_acked() that tcp_trim_head() only decreases the packet count, so that packets_acked in tcp_tso_acked() could underflow, leading tcp_clean_rtx_queue() to pass u32 pkts_acked values as large as 0xffffffff to ca_ops->pkts_acked(). As an aside, if tcp_trim_head() had really wanted the skb to reflect the current MSS, it should have called tcp_set_skb_tso_segs() unconditionally, since a decrease in MSS would mean that a single-packet skb should now be sliced into multiple segments. Signed-off-by: Neal Cardwell <ncardwell@google.com> Acked-by: Nandita Dukkipati <nanditad@google.com> Acked-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Glauber Costa authored
sysctl_tcp_mem() initialization was moved to sysctl_tcp_ipv4.c in commit 3dc43e3e, since it became a per-ns value. That code, however, will never run when CONFIG_SYSCTL is disabled, leading to bogus values on those fields - causing hung TCP sockets. This patch fixes it by keeping an initialization code in tcp_init(). It will be overwritten by the first net namespace init if CONFIG_SYSCTL is compiled in, and do the right thing if it is compiled out. It is also named properly as tcp_init_mem(), to properly signal its non-sysctl side effect on TCP limits. Reported-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Glauber Costa <glommer@parallels.com> Cc: David S. Miller <davem@davemloft.net> Link: http://lkml.kernel.org/r/4F22D05A.8030604@parallels.com [ renamed the function, tidied up the changelog a bit ] Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: David S. Miller <davem@davemloft.net>
-