- 02 Oct, 2020 21 commits
-
-
Qinglang Miao authored
Simplify the return expression. Acked-by:
Frederic Barrat <fbarrat@linux.ibm.com> Acked-by:
Andrew Donnellan <ajd@linux.ibm.com> Signed-off-by:
Qinglang Miao <miaoqinglang@huawei.com> Link: https://lore.kernel.org/r/20200921131047.92526-1-miaoqinglang@huawei.comSigned-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Necip Fazil Yildiran authored
When OCXL is enabled and HOTPLUG_PCI is disabled, it results in the following Kbuild warning: WARNING: unmet direct dependencies detected for HOTPLUG_PCI_POWERNV Depends on [n]: PCI [=y] && HOTPLUG_PCI [=n] && PPC_POWERNV [=y] && EEH [=y] Selected by [y]: - OCXL [=y] && PPC_POWERNV [=y] && PCI [=y] && EEH [=y] The reason is that OCXL selects HOTPLUG_PCI_POWERNV without depending on or selecting HOTPLUG_PCI while HOTPLUG_PCI_POWERNV is subordinate to HOTPLUG_PCI. HOTPLUG_PCI_POWERNV is a visible symbol with a set of dependencies. Selecting it will lead to overlooking its other dependencies as well. Let OCXL depend on HOTPLUG_PCI_POWERNV instead to avoid Kbuild issues. Fixes: 49ce94b8 ("ocxl: Add PCI hotplug dependency to Kconfig") Acked-by:
Necip Fazil Yildiran <fazilyildiran@gmail.com> Link: https://lore.kernel.org/r/20200918094148.20525-1-fazilyildiran@gmail.comSigned-off-by:
-
Loic Poulain authored
This value was missing in the channel debugfs output. Reviewed-by:
Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by:
Loic Poulain <loic.poulain@linaro.org> Signed-off-by:
-
Manivannan Sadhasivam authored
The Kbuild rule to build MHI should use the append operator. This fixes the below warning reported by Kbuild test bot. WARNING: modpost: missing MODULE_LICENSE() in drivers/bus/mhi/core/main.o WARNING: modpost: missing MODULE_LICENSE() in drivers/bus/mhi/core/pm.o WARNING: modpost: missing MODULE_LICENSE() in drivers/bus/mhi/core/boot.o Fixes: 0cbf2608 ("bus: mhi: core: Add support for registering MHI controllers") Reported-by:
kernel test robot <lkp@intel.com> Signed-off-by:
-
Loic Poulain authored
nr_irqs_req is unused in MHI stack. Reviewed-by:
-
Loic Poulain authored
There is no requirement for using a dedicated IRQ per event ring. Some systems does not support multiple MSI vectors (e.g. intel without CONFIG_IRQ_REMAP), In that case the MHI controller can configure all the event rings to use the same interrupt (as fallback). Allow this by removing the nr_irqs = ev_ring test and add extra check in the irq_setup function. Reviewed-by:
-
Bhaumik Bhatt authored
Introduce sysfs entries to enable userspace clients the ability to read the serial number and the OEM PK Hash values obtained from BHI. OEMs need to read these device-specific hardware information values through userspace for factory testing purposes and cannot be exposed via degbufs as it may remain disabled for performance reasons. Also, update the documentation for ABI to include these entries. Reviewed-by:
Bhaumik Bhatt <bbhatt@codeaurora.org> Signed-off-by:
-
Bhaumik Bhatt authored
Introduce debugfs entries to show state, register, channel, device, and event rings information. Allow the host to dump registers, issue device wake, and change the MHI timeout to help in debug. Reviewed-by:
-
Bhaumik Bhatt authored
Kconfig coding style mandates use of tabs for the configuration definition and an additional two spaces for the help text. Make the required changes to the MHI Kconfig adhering to those guidelines. Reviewed-by:
Randy Dunlap <rdunlap@infradead.org> Signed-off-by:
-
Clark Williams authored
rwlock.h should not be included directly. Instead linux/splinlock.h should be included. Including it directly will break the RT build. Also there is no point in including _types.h headers directly. There is no benefit in including the type without the accessor. Fixes: 0cbf2608 ("bus: mhi: core: Add support for registering MHI controllers") Reviewed-by:
Clark Williams <williams@redhat.com> Signed-off-by:
Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by:
-
Hemant Kumar authored
MHI channel, event and controller config data needs to be treated read only information. Add const qualifier to make sure config information passed by MHI controller is not modified by MHI core driver. Suggested-by:
Kalle Valo <kvalo@codeaurora.org> Reviewed-by:
Hemant Kumar <hemantk@codeaurora.org> Signed-off-by:
-
Bhaumik Bhatt authored
Client devices should use the APIs provided to allocate and free the MHI controller structure. This will help ensure that the structure is zero-initialized and there are no false positives with respect to reading any values such as the serial number or the OEM PK hash. Suggested-by:
-
Bhaumik Bhatt authored
Device hardware specific information such as serial number and the OEM PK hash can be read using BHI and saved on host to identify the endpoint. Reviewed-by:
Jeffrey Hugo <jhugo@codeaurora.org> Reviewed-by:
-
Bhaumik Bhatt authored
Use counters to track MHI device state transitions such as those to M0, M2, or M3 states. This can help in better debug, allowing the user to see the number of transitions to a certain MHI state when queried using debugfs entries or via other mechanisms. Reviewed-by:
-
Bhaumik Bhatt authored
Introduce a helper function to determine whether the device is in a powered ON state and resides in one of the active MHI states. This will allow for some use cases where access can be pre-determined. Reviewed-by:
-
Bhaumik Bhatt authored
An MHI device is not necessarily associated with only channels as we can have one associated with the controller itself. Hence, the chan_name field within the mhi_device structure should instead be replaced with a generic name to accurately reflect any type of MHI device. Reviewed-by:
-
Bhaumik Bhatt authored
It is possible that the host may be suspending or suspended and may not allow an outgoing device wake assert immediately if a client has requested for it. Ensure that the host wakes up and allows for it so the client does not have to wait for an external trigger or an outgoing packet to be queued for the host resume to occur. Reviewed-by:
-
Bhaumik Bhatt authored
Autonomous low power mode support requires the MHI host to resume from multiple places and post a wakeup source to exit system suspend. This needs to be done in a non-blocking manner. Introduce a helper API to trigger the host resume for data transfers and other non-blocking use cases while supporting implementation of autonomous low power modes. Reviewed-by:
-
Bhaumik Bhatt authored
Add the missing check to abort suspends if a client driver has pending outgoing packets to send to the device. This allows better utilization of the MHI bus wherein clients on the host are not left waiting for longer suspend or resume cycles to finish for data transfers. Reviewed-by:
-
Bhaumik Bhatt authored
mhi_ctrl_ev_task() in the internal header file occurred twice. Remove one of the occurrences for clean-up. Reviewed-by:
-
Randy Dunlap authored
Drop doubled word "table" in kernel-doc. Fix syntax for the kernel-doc notation for struct image_info. Note that the bhi_vec field is private and not part of the kernel-doc. Drop doubled word "device" in a comment. Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Cc: Hemant Kumar <hemantk@codeaurora.org> Reviewed-by:
-
- 01 Oct, 2020 1 commit
-
-
Greg Kroah-Hartman authored
Merge tag 'soundwire-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire into char-misc-next Vinod writes: soundwire updates for 5.10-rc1 This round of update includes: - Generic bandwidth allocation algorithm from Intel folks - PM support for Intel chipsets - Updates to Intel drivers which makes sdw usable on latest laptops - Support for MMIO SDW controllers found in QC chipsets - Update to subsystem to use helpers in bitfield.h to manage register bits * tag 'soundwire-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire: (66 commits) soundwire: sysfs: add slave status and device number before probe soundwire: bus: add enumerated Slave device to device list soundwire: remove an unnecessary NULL check soundwire: cadence: add data port test fail interrupt soundwire: intel: enable test modes soundwire: enable Data Port test modes soundwire: intel: use {u32|u16}p_replace_bits soundwire: cadence: use u32p_replace_bits soundwire: qcom: get max rows and cols info from compatible soundwire: qcom: add support to block packing mode soundwire: qcom: clear BIT FIELDs before value set. soundwire: Add generic bandwidth allocation algorithm soundwire: cadence: add parity error injection through debugfs soundwire: bus: export broadcast read/write capability for tests ASoC: codecs: realtek-soundwire: ignore initial PARITY errors soundwire: bus: use quirk to filter out invalid parity errors soundwire: slave: add first_interrupt_done status soundwire: bus: filter-out unwanted interrupt reports ASoC/soundwire: bus: use property to set interrupt masks soundwire: qcom: fix SLIBMUS/SLIMBUS typo ...
-
- 30 Sep, 2020 3 commits
-
-
Greg Kroah-Hartman authored
There are a number of subdirectories and files in drivers/char/ that have their own maintainers and developers and ways of getting patches to Linus. This includes random.c, IPMI, hardware random drivers, TPM drivers, and agp drivers. Instead of sending those patches to Arnd and myself, who can't do anything with them, send them to the proper developers instead. Acked-by:
Arnd Bergmann <arnd@arndb.de> Acked-by:
Corey Minyard <cminyard@mvista.com> Link: https://lore.kernel.org/r/20200930121007.GA1615300@kroah.comSigned-off-by:
-
Julia Lawall authored
sg_init_table zeroes its first argument, so the allocation of that argument doesn't have to. the semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression x,n,flags; @@ x = - kcalloc + kmalloc_array (n,sizeof(struct scatterlist),flags) ... sg_init_table(x,n) // </smpl> Signed-off-by:
Julia Lawall <Julia.Lawall@inria.fr> Link: https://lore.kernel.org/r/1600601186-7420-14-git-send-email-Julia.Lawall@inria.frSigned-off-by:
-
Oded Gabbay authored
There was a copy-paste error, and the wrong define was used for initializing the QMAN. Signed-off-by:
Oded Gabbay <oded.gabbay@gmail.com> Link: https://lore.kernel.org/r/20200925171415.25663-1-oded.gabbay@gmail.comSigned-off-by:
-
- 28 Sep, 2020 15 commits
-
-
Sai Prakash Ranjan authored
In commit f188b5e7 ("coresight: etm4x: Save/restore state across CPU low power states"), mistakenly TRCVMIDCCTLR1 register value was saved in trcvmidcctlr0 state variable which is used to store TRCVMIDCCTLR0 register value in etm4x_cpu_save() and then same value is written back to both TRCVMIDCCTLR0 and TRCVMIDCCTLR1 in etm4x_cpu_restore(). There is already a trcvmidcctlr1 state variable available for TRCVMIDCCTLR1, so use it. Fixes: f188b5e7 ("coresight: etm4x: Save/restore state across CPU low power states") Reviewed-by:
Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by:
Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org> Signed-off-by:
Mathieu Poirier <mathieu.poirier@linaro.org> Link: https://lore.kernel.org/r/20200928163513.70169-26-mathieu.poirier@linaro.orgSigned-off-by:
-
Tingwei Zhang authored
Enhance coresight developer's efficiency to debug coresight drivers. - Kconfig becomes a tristate, to allow =m - append -core to source file name to allow module to be called coresight by the Makefile - modules can have only one init/exit, so we add the etm_perf register/unregister function calls to the core init/exit functions. - add a MODULE_DEVICE_TABLE for autoloading on boot Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Leo Yan <leo.yan@linaro.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Suzuki K Poulose <Suzuki.Poulose@arm.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Russell King <linux@armlinux.org.uk> Tested-by:
Mike Leach <mike.leach@linaro.org> Reviewed-by:
Kim Phillips <kim.phillips@arm.com> Signed-off-by:
Tingwei Zhang <tingwei@codeaurora.org> Signed-off-by:
-
Tingwei Zhang authored
Allow to build coresight-catu as modules, for ease of development. - Kconfig becomes a tristate, to allow =m - add catu_remove functions, for module unload - add a MODULE_DEVICE_TABLE for autoloading on boot Reviewed-by:
-
Mian Yousaf Kaukab authored
Make etr_catu_buf_ops static. Instead of directly accessing it in etr_buf_ops[], add a function to let catu driver register the ops at runtime. Break circular dependency between tmc-etr and catu drivers. Reviewed-by:
Mian Yousaf Kaukab <ykaukab@suse.de> Signed-off-by:
-
Tingwei Zhang authored
Allow to build coresight-cti as a module, for ease of development. - Kconfig becomes a tristate, to allow =m - append -core to source file name to allow module to be called coresight-cti by the Makefile - add an cti_remove function, for module unload - add a MODULE_DEVICE_TABLE for autoloading on boot - move cti_remove_conn_xrefs to cti_remove since all sysfs links have gone when system calls device_release. Reviewed-by Mike Leach <mike.leach@linaro.org> Tested-by:
-
Tingwei Zhang authored
CTI device is enabled when associated coresight device is enabled. Increase the module and device reference count for CTI device when it's enabled. This can prevent CTI device be removed or module be unloaded when CTI device is enabled by an active trace session. Signed-off-by:
-
Tingwei Zhang authored
If associated ect device is not enabled at first place, disable routine should not be called. Add ect_enabled flag to check whether ect device is enabled. Fix the issue in below case. Ect device is not available when associated coresight device enabled and the association is established after coresight device is enabled. Signed-off-by:
-
Mike Leach authored
During module unload, a coresight driver module will call back into the CTI driver to remove any links between the two devices. The current code has 2 issues:- 1) in the CTI driver the matching code is matching to the wrong device so misses all the links. 2) The callback is called too late in the unload process resulting in a crash. This fixes both the issues. Fixes: 177af828 ("coresight: cti: Enable CTI associated with devices") Reported-by:
-
Mike Leach authored
CTI code to remove sysfs link to other devices on shutdown, incorrectly tries to remove a single ended link when these are all double ended. This implementation leaves elements in the link info structure undefined which results in a crash in recent tests for driver module unload. This patch corrects the link removal code. Fixes: 73274abb ("coresight: cti: Add in sysfs links to other coresight devices") Reported-by:
-
Tingwei Zhang authored
Add static cti_assoc_ops to coresight core driver. Let cti driver register the add_assoc and remove_assoc call back. Avoid coresight core driver to depend on cti driver. Tested-by:
-
Kim Phillips authored
Allow to build coresight-replicator as modules, for ease of development. - Kconfig becomes a tristate, to allow =m - combine static and dynamic replicator init into single module_init/exit call - add replicator_remove functions, for module unload - add a MODULE_DEVICE_TABLE for autoloading on boot Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Leo Yan <leo.yan@linaro.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Suzuki K Poulose <Suzuki.Poulose@arm.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Russell King <linux@armlinux.org.uk> Co-developed-by:
-
Kim Phillips authored
Allow to build coresight-funnel as module, for ease of development. - combine static and dynamic funnel init into single module_init/exit call - add funnel_remove functions, for module unload - add a MODULE_DEVICE_TABLE for autoloading on boot Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Leo Yan <leo.yan@linaro.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Suzuki K Poulose <Suzuki.Poulose@arm.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Russell King <linux@armlinux.org.uk> Co-developed-by:
-
Kim Phillips authored
Allow to build coresight-tmc as a module, for ease of development. - Kconfig becomes a tristate, to allow =m - append -core to source file name to allow module to be called coresight-tmc by the Makefile - add an tmc_remove function, for module unload - add a MODULE_DEVICE_TABLE for autoloading on boot Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Leo Yan <leo.yan@linaro.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Suzuki K Poulose <Suzuki.Poulose@arm.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Russell King <linux@armlinux.org.uk> Tested-by:
-
Kim Phillips authored
Allow to build coresight-tpiu as a module, for ease of development. - Kconfig becomes a tristate, to allow =m - add a tpiu_remove function, for module unload - add a MODULE_DEVICE_TABLE for autoloading on boot Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Leo Yan <leo.yan@linaro.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Suzuki K Poulose <Suzuki.Poulose@arm.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Russell King <linux@armlinux.org.uk> Reviewed-by:
-
Kim Phillips authored
Allow to build coresight-etb10 as a module, for ease of development. - Kconfig becomes a tristate, to allow =m - add an etb_remove function, for module unload - add a MODULE_DEVICE_TABLE for autoloading on boot Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Leo Yan <leo.yan@linaro.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Suzuki K Poulose <Suzuki.Poulose@arm.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Russell King <linux@armlinux.org.uk> Tested-by:
-
