- 08 Feb, 2013 1 commit
-
-
Luciano Coelho authored
The PLT firmware used by wl12xx for calibration always has the same version number as the single-role firmware. Currntly the driver rejects the PLT firmware since anything that is not single-role uses the multi-role version. Fix this by using the single-role version for everything except multi-role. Signed-off-by:Luciano Coelho <coelho@ti.com>
-
- 01 Feb, 2013 39 commits
-
-
Larry Finger authored
Whe this driver is built with "make W=1", the following warnings are output: drivers/net/wireless/rtlwifi/rtl8723ae/fw.c:515:5: warning: variable ‘own’ set but not used [-Wunused-but-set-variable] drivers/net/wireless/rtlwifi/rtl8723ae/hal_btc.c:1436:5: warning: variable ‘bt_retry_cnt’ set but not used [-Wunused-but-set-variable] drivers/net/wireless/rtlwifi/rtl8723ae/hw.c:706:6: warning: variable ‘reg_ratr’ set but not used [-Wunused-but-set-variable] drivers/net/wireless/rtlwifi/rtl8723ae/hw.c:2033:41: warning: variable ‘cur_rfstate’ set but not used [-Wunused-but-set-variable] drivers/net/wireless/rtlwifi/rtl8723ae/phy.c:620:23: warning: variable ‘radiob_arraylen’ set but not used [-Wunused-but-set-variable] drivers/net/wireless/rtlwifi/rtl8723ae/phy.c:619:7: warning: variable ‘radiob_array_table’ set but not used [-Wunused-but-set-variable] drivers/net/wireless/rtlwifi/rtl8723ae/phy.c:617:7: warning: variable ‘rtstatus’ set but not used [-Wunused-but-set-variable] drivers/net/wireless/rtlwifi/rtl8723ae/phy.c:1534:6: warning: variable ‘bbvalue’ set but not used [-Wunused-but-set-variable] drivers/net/wireless/rtlwifi/rtl8723ae/phy.c:1716:6: warning: variable ‘reg_ecc’ set but not used [-Wunused-but-set-variable] drivers/net/wireless/rtlwifi/rtl8723ae/phy.c:1715:61: warning: variable ‘reg_ec4’ set but not used [-Wunused-but-set-variable] drivers/net/wireless/rtlwifi/rtl8723ae/phy.c:1715:34: warning: variable ‘reg_eac’ set but not used [-Wunused-but-set-variable] drivers/net/wireless/rtlwifi/rtl8723ae/trx.c:247:6: warning: variable ‘psaddr’ set but not used [-Wunused-but-set-variable] Signed-off-by:
Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by:
John W. Linville <linville@tuxdriver.com>
-
Larry Finger authored
when this driver is built with "make W=1", the following warning is printed: drivers/net/wireless/rtlwifi/rtl8192de/dm.c:1058:5: warning: comparison is always false due to limited range of data type [-Wtype-limits] Signed-off-by:
-
Larry Finger authored
When this driver is built with "make W=1", the following warning is output: drivers/net/wireless/rtlwifi/rtl8192cu/sw.c:56:6: warning: variable ‘err’ set but not used [-Wunused-but-set-variable] Signed-off-by:
-
Larry Finger authored
When this driver is built with "make W=1", the following warning occurs: drivers/net/wireless/rtlwifi/rtl8192c/dm_common.c:907:4: warning: comparison is always false due to limited range of data type [-Wtype-limits] Signed-off-by:
-
Larry Finger authored
Building this driver with "make W=1" results in the following 2 warnings: drivers/net/wireless/rtlwifi/usb.c:829:21: warning: variable ‘urb_list’ set but not used [-Wunused-but-set-variable] drivers/net/wireless/rtlwifi/usb.c:828:23: warning: variable ‘skb_list’ set but not used [-Wunused-but-set-variable] Signed-off-by:
-
Larry Finger authored
Many warnings like the following arise from a build with W=1 on the make line: warning: comparison of unsigned expression >= 0 is always true [-Wtype-limits] Changing the overall debug level storage from unsigned to signed fixes these. Signed-off-by:
-
Xose Vazquez Perez authored
0x1814,0x359f is a RT3592 802.11a/b/g/n 2x2 WiFi Adapter support added by 872834df Cc: Ivo van Doorn <IvDoorn@gmail.com> Cc: Gertjan van Wingerde <gwingerde@gmail.com> Cc: Helmut Schaa <helmut.schaa@googlemail.com> Cc: John W. Linville <linville@tuxdriver.com> Cc: users@rt2x00.serialmonkey.com Cc: linux-wireless@vger.kernel.org Signed-off-by:
Xose Vazquez Perez <xose.vazquez@gmail.com> Acked-by:
Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by:
-
Rafał Miłecki authored
Signed-off-by:
Rafał Miłecki <zajec5@gmail.com> Signed-off-by:
-
Sven Eckelmann authored
Leaving the unused variables ath_mci_cleanup causes build warnings. Signed-off-by:
Sven Eckelmann <sven@narfation.org> Signed-off-by:
-
Sven Eckelmann authored
Signed-off-by:
-
Sven Eckelmann authored
The relay file depends on relayfs. Trying to close this file without having ATH9K_DEBUGFS (and therefore RELAY) activated causes build failures. Signed-off-by:
-
Sven Eckelmann authored
The code is only used when ATH9K_DEBUGFS is activated and causes build warnings when it is still compiled without user. Signed-off-by:
-
Sven Eckelmann authored
The code can only be used when ATH9k_DEBUGFS is enabled an not when ATH_DEBUG is activated. Still enabling it would cause build failures. Signed-off-by:
-
Sven Eckelmann authored
The spectral scan support activated through ATH9K_DEBUGFS depends on RELAY for the kernel->userspace communication. Not activating RELAY causes build failures. The RELAY is added as select instead of depend to do it similar like the only other user of RELAY: BLK_DEV_IO_TRACE Signed-off-by:
-
Bing Zhao authored
max_tx_buf_size is not used any more after reconfiguration of tx buffer size has been removed. Also add missing curr_tx_buf_size update while dumping debug info via debugfs. Signed-off-by:
Bing Zhao <bzhao@marvell.com> Signed-off-by:
-
Bing Zhao authored
It's observed that reconfiguration of tx buffer size before association can cause data path failure in firmware after associated. Although this is only found with PCIe cards, but potentially it could happen with any other interfaces as well. The tx buffer reconfiguration is not really useful in firmware. Let's remove it for all interfaces. Signed-off-by:
Avinash Patil <patila@marvell.com> Signed-off-by:
-
Christian Lamparter authored
The ath9k hardware reports whenever an frame was part of an A-MPDU. MAC80211 already provides the necessary API to pass this additional information along to whomever needs it. Signed-off-by:
Christian Lamparter <chunkeey@googlemail.com> Signed-off-by:
-
Xose Vazquez Perez authored
Devices were taken from Ralink Linux drivers: - RT5370 0x043e, 0x7a32 0x043e, 0x7a42 0x0471, 0x2126 0x0471, 0x2180 0x0471, 0x2181 0x0471, 0x2182 Identify these ones: 0x04da, 0x23f6 in CONFIG_RT2800USB_RT53XX is a Panasonic device 0x07d1, 0x3c17 in RT2800USB_UNKNOWN is a RT3070 0x0586, 0x341a in RT2800USB_UNKNOWN is a RT3070 Cc: Ivo van Doorn <IvDoorn@gmail.com> Cc: Gertjan van Wingerde <gwingerde@gmail.com> Cc: Helmut Schaa <helmut.schaa@googlemail.com> Cc: John W. Linville <linville@tuxdriver.com> Cc: users@rt2x00.serialmonkey.com Cc: linux-wireless@vger.kernel.org Signed-off-by:
-
Stanislaw Gruszka authored
Handle pci_map_page() errors. This fixes "DMA-API: device driver failed to check map error" warning. Reported-by:
Zdenek Kabelac <zkabelac@redhat.com> Signed-off-by:
Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by:
-
Rafał Miłecki authored
Signed-off-by:
-
Christian Lamparter authored
This patch is based on "iwlwifi: report A-MPDU status". (12bf6f45) Since the firmware will give us an A-MPDU bit and only a single PHY information packet for all the subframes in an A-MPDU, we can easily report the minimal A-MPDU information for radiotap. Cc: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by:
-
John W. Linville authored
Merge branch 'for-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next
-
Andre Guedes authored
This patch does a trivial refactor in mgmt_pending_foreach function. It replaces list_for_each_safe by list_for_each_entry_safe, simplifying the function. Signed-off-by:
Andre Guedes <andre.guedes@openbossa.org> Signed-off-by:
Gustavo Padovan <gustavo.padovan@collabora.co.uk>
-
Andre Guedes authored
This patch removes unneeded locking in hci_le_adv_report_evt. There is no need to lock hdev before calling mgmt_device_found. Signed-off-by:
-
Andre Guedes authored
This patch reduces the critical section protected by sco_conn_lock in sco_conn_ready function. The lock is acquired only when it is really needed. This patch fixes the following lockdep warning which is generated when the host terminates a SCO connection. Today, this warning is a false positive. There is no way those two threads reported by lockdep are running at the same time since hdev->workqueue (where rx_work is queued) is single-thread. However, if somehow this behavior is changed in future, we will have a potential deadlock. ====================================================== [ INFO: possible circular locking dependency detected ] 3.8.0-rc1+ #7 Not tainted ------------------------------------------------------- kworker/u:1H/1018 is trying to acquire lock: (&(&conn->lock)->rlock){+.+...}, at: [<ffffffffa0033ba6>] sco_chan_del+0x66/0x190 [bluetooth] but task is already holding lock: (slock-AF_BLUETOOTH-BTPROTO_SCO){+.+...}, at: [<ffffffffa0033d5a>] sco_conn_del+0x8a/0xe0 [bluetooth] which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (slock-AF_BLUETOOTH-BTPROTO_SCO){+.+...}: [<ffffffff81083011>] lock_acquire+0xb1/0xe0 [<ffffffff813efd01>] _raw_spin_lock+0x41/0x80 [<ffffffffa003436e>] sco_connect_cfm+0xbe/0x350 [bluetooth] [<ffffffffa0015d6c>] hci_event_packet+0xd3c/0x29b0 [bluetooth] [<ffffffffa0004583>] hci_rx_work+0x133/0x870 [bluetooth] [<ffffffff8104d65f>] process_one_work+0x2bf/0x4f0 [<ffffffff81050022>] worker_thread+0x2b2/0x3e0 [<ffffffff81056021>] kthread+0xd1/0xe0 [<ffffffff813f14bc>] ret_from_fork+0x7c/0xb0 -> #0 (&(&conn->lock)->rlock){+.+...}: [<ffffffff81082215>] __lock_acquire+0x1465/0x1c70 [<ffffffff81083011>] lock_acquire+0xb1/0xe0 [<ffffffff813efd01>] _raw_spin_lock+0x41/0x80 [<ffffffffa0033ba6>] sco_chan_del+0x66/0x190 [bluetooth] [<ffffffffa0033d6d>] sco_conn_del+0x9d/0xe0 [bluetooth] [<ffffffffa0034653>] sco_disconn_cfm+0x53/0x60 [bluetooth] [<ffffffffa000fef3>] hci_disconn_complete_evt.isra.54+0x363/0x3c0 [bluetooth] [<ffffffffa00150f7>] hci_event_packet+0xc7/0x29b0 [bluetooth] [<ffffffffa0004583>] hci_rx_work+0x133/0x870 [bluetooth] [<ffffffff8104d65f>] process_one_work+0x2bf/0x4f0 [<ffffffff81050022>] worker_thread+0x2b2/0x3e0 [<ffffffff81056021>] kthread+0xd1/0xe0 [<ffffffff813f14bc>] ret_from_fork+0x7c/0xb0 other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(slock-AF_BLUETOOTH-BTPROTO_SCO); lock(&(&conn->lock)->rlock); lock(slock-AF_BLUETOOTH-BTPROTO_SCO); lock(&(&conn->lock)->rlock); *** DEADLOCK *** 4 locks held by kworker/u:1H/1018: #0: (hdev->name#2){.+.+.+}, at: [<ffffffff8104d5f8>] process_one_work+0x258/0x4f0 #1: ((&hdev->rx_work)){+.+.+.}, at: [<ffffffff8104d5f8>] process_one_work+0x258/0x4f0 #2: (&hdev->lock){+.+.+.}, at: [<ffffffffa000fbe9>] hci_disconn_complete_evt.isra.54+0x59/0x3c0 [bluetooth] #3: (slock-AF_BLUETOOTH-BTPROTO_SCO){+.+...}, at: [<ffffffffa0033d5a>] sco_conn_del+0x8a/0xe0 [bluetooth] stack backtrace: Pid: 1018, comm: kworker/u:1H Not tainted 3.8.0-rc1+ #7 Call Trace: [<ffffffff813e92f9>] print_circular_bug+0x1fb/0x20c [<ffffffff81082215>] __lock_acquire+0x1465/0x1c70 [<ffffffff81083011>] lock_acquire+0xb1/0xe0 [<ffffffffa0033ba6>] ? sco_chan_del+0x66/0x190 [bluetooth] [<ffffffff813efd01>] _raw_spin_lock+0x41/0x80 [<ffffffffa0033ba6>] ? sco_chan_del+0x66/0x190 [bluetooth] [<ffffffffa0033ba6>] sco_chan_del+0x66/0x190 [bluetooth] [<ffffffffa0033d6d>] sco_conn_del+0x9d/0xe0 [bluetooth] [<ffffffffa0034653>] sco_disconn_cfm+0x53/0x60 [bluetooth] [<ffffffffa000fef3>] hci_disconn_complete_evt.isra.54+0x363/0x3c0 [bluetooth] [<ffffffffa000fbd0>] ? hci_disconn_complete_evt.isra.54+0x40/0x3c0 [bluetooth] [<ffffffffa00150f7>] hci_event_packet+0xc7/0x29b0 [bluetooth] [<ffffffff81202e90>] ? __dynamic_pr_debug+0x80/0x90 [<ffffffff8133ff7d>] ? kfree_skb+0x2d/0x40 [<ffffffffa0021644>] ? hci_send_to_monitor+0x1a4/0x1c0 [bluetooth] [<ffffffffa0004583>] hci_rx_work+0x133/0x870 [bluetooth] [<ffffffff8104d5f8>] ? process_one_work+0x258/0x4f0 [<ffffffff8104d65f>] process_one_work+0x2bf/0x4f0 [<ffffffff8104d5f8>] ? process_one_work+0x258/0x4f0 [<ffffffff8104fdc1>] ? worker_thread+0x51/0x3e0 [<ffffffffa0004450>] ? hci_tx_work+0x800/0x800 [bluetooth] [<ffffffff81050022>] worker_thread+0x2b2/0x3e0 [<ffffffff8104fd70>] ? busy_worker_rebind_fn+0x100/0x100 [<ffffffff81056021>] kthread+0xd1/0xe0 [<ffffffff81055f50>] ? flush_kthread_worker+0xc0/0xc0 [<ffffffff813f14bc>] ret_from_fork+0x7c/0xb0 [<ffffffff81055f50>] ? flush_kthread_worker+0xc0/0xc0 Signed-off-by: -
Johan Hedberg authored
This patch increments the management interface revision due to the various fixes, improvements and other changes that have gone in lately. Signed-off-by:
Johan Hedberg <johan.hedberg@intel.com> Acked-by:
Marcel Holtmann <marcel@holtmann.org> Signed-off-by:
-
Johan Hedberg authored
If a controller is powered on while the HCI_AUTO_OFF flag is set the link security setting (HCI_LINK_SECURITY) might not be in sync with the actual state of the controller (HCI_AUTH). This patch fixes the issue by checking for inequality between the intended and actual settings and sends a HCI_Write_Auth_Enable command if necessary. Signed-off-by:
-
Johan Hedberg authored
This patch adds the necessary code for encoding a list of 128-bit UUIDs into the EIR data. Signed-off-by:
-
Johan Hedberg authored
This patch adds the necessary code for inserting a list of 32-bit UUIDs into the EIR data. Signed-off-by:
-
Johan Hedberg authored
We will need to create three separate UUID lists in the EIR data (for 16, 32 and 128 bit UUIDs) so the code is easier to follow if each list is generated in their own function. Signed-off-by:
-
Johan Hedberg authored
The amount of data encoded so far in the create_eir() function can be calculated simply through the difference between the data and ptr pointer variables. The eir_len variable then becomes essentially useless. Signed-off-by:
-
Johan Hedberg authored
There's no need to use two separate loops to generate a UUID list for the EIR data. This patch merges the two loops previously used for the 16-bit UUID list generation into a single loop, thus simplifying the code a great deal. Signed-off-by:
-
Johan Hedberg authored
The UUID removal code can be simplified by using list_for_each_entry_safe instead of list_for_each_safe. Signed-off-by:
-
Johan Hedberg authored
The primary purpose of the UUIDs is to enable generation of EIR and AD data. In these data formats the UUIDs are split into separate fields based on whether they're 16, 32 or 128 bit UUIDs. To make the generation of these data fields simpler this patch adds a type member to the bt_uuid struct and assigns a value to it as soon as the UUID is added to the kernel. This way the type doesn't need to be calculated each time the UUID list is later iterated. Signed-off-by:
-
Johan Hedberg authored
The code for clearing the UUIDs list can be simplified by using list_for_each_entry_safe instead of list_for_each_safe. Signed-off-by:
-
Johan Hedberg authored
We should be encoding UUIDs to the EIR data in the same order that they were added to the kernel, i.e. each UUID should be added to the end of the UUIDs list. This patch fixes the issue by using list_add_tail instead of list_add for storing the UUIDs. Signed-off-by:
-
Lilach Edelstein authored
Move the reg_lock that protects HW register access into the transport implementation. Locking is no longer exposed, but handled internally in grab and release NIC access. This simplifies the users. Signed-off-by:
Lilach Edelstein <lilach.edelstein@intel.com> Signed-off-by:
Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by:
Johannes Berg <johannes.berg@intel.com>
-
Lilach Edelstein authored
Express iwl_set_bit() and iwl_clear_bit() through iwl_set_bits_mask() and add the latter to the transport's API in order to allow different implementation for different transport types in the future. Signed-off-by:
-
Johannes Berg authored
As the rate scaling algorithm will attempt to enable aggregation over and over again, the message will flood the log if there is, for example, Bluetooth streaming music. Make it a debug messages instead of printing it all the time. Reported-by:
Jan-Michael Brummer <jan.brummer@tabos.org> Reviewed-by:
-
