- 21 Jul, 2015 33 commits
-
-
Florian Fainelli authored
bcmgenet_open()'s error path call free_irq() with a dev_id argument different from the one we used to call request_irq() with, this will make us trip over the warning in kernel/irq/manage.c:__free_irq() Fixes: 1c1008c7 ("net: bcmgenet: add main driver file") Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Florian Fainelli authored
We are currently issuing multiple PHY resets during a suspend/resume, first during bcmgenet_power_up() which does a hardware reset, then a software reset by calling bcmgenet_mii_reset(). This is both unnecessary and can take as long as 10ms per MDIO transactions while we re-apply workarounds because we do not yet have MDIO interrupts enabled. phy_resume() takes care of re-apply our workarounds in case we need any, and bcmgenet_power_up() does a PHY hardware reset, all of this is more than enough to guarantee that the PHY operates correctly. Fixes: 1c1008c7 ("net: bcmgenet: add main driver file") Signed-off-by:
-
David S. Miller authored
Joachim Eastwood says: ==================== stmmac clean up for 4.3 part1 This patch set continues the conversion of the dwmac glue layers to more proper platform drivers. The first part of the patch set cleans up stmmac_platform a bit. Refactors code from the common probe function and exports two functions that will be used in the dwmac-* drivers. Second part converts two simple dwmac-* drivers to have their own probe function and use the exported functions. This brings us closer to point where stmmac_platform is only a library of common functions for the dwmac-* drivers to use. The plan next is: * add probe functions to the rest of the dwmac-* drivers * move probe function in stmmac_platform to dwmac-generic * remove struct stmmac_of_data and let those drivers that actually need match data handle it themselves * clean up include/linux/stmmac.h Note that this patch set has only been tested on lpc18xx so testing on other platforms is greatly appreciated. Previous parts can be found here: http://www.spinics.net/lists/netdev/msg328997.html http://www.spinics.net/lists/netdev/msg329932.html ==================== Signed-off-by:
-
Joachim Eastwood authored
Both of these fields are unused and has been unused since they were added 3 and 5 years ago. Drop them since they are clearly not very useful. Signed-off-by:
Joachim Eastwood <manabian@gmail.com> Signed-off-by:
-
Joachim Eastwood authored
By using a few functions from stmmac_platform we can now create a proper probe function in this driver. By doing so we can drop the OF match data and simplify the overall driver. Signed-off-by:
-
Joachim Eastwood authored
By using a few functions from stmmac_platform we can now create a proper probe function in this driver. By doing so we can drop the OF match data and simplify the overall driver. Signed-off-by:
-
Joachim Eastwood authored
Export stmmac_probe_config_dt() and stmmac_get_platform_resources() so they can be used in the dwmac-* drivers themselves. This will allow us to build more flexible and standalone drivers which just use stmmac_platform as a library for setup functions. Signed-off-by:
-
Joachim Eastwood authored
Since stmmac_probe_config_dt() allocates the platform data structure it is cleaner if it just returned this structure directly. This function will later be used in the probe function in dwmac-* drivers. Signed-off-by:
-
Joachim Eastwood authored
Refactor all code that deals with platform resources into it's own get function. This function will later be used in the probe function in dwmac-* drivers. Signed-off-by:
-
Joachim Eastwood authored
Refactor code to clearly separate probing non-dt versus dt. In the non-dt case platform data must be supplied to probe successfully. For dt the platform data structure is created and match data is copied into it. Note that support for supplying platform data in dt from AUXDATA is dropped as no users in mainline does this. This change will allow dt dwmac-* drivers to call the config_dt() function from probe to create the needed platform data struct and retrieve common dt properties. Signed-off-by:
-
Joachim Eastwood authored
By using of_device_get_match_data() the code that retrieve match data can be simplified quite a bit. Signed-off-by:
-
David S. Miller authored
Jon Maloy says: ==================== tipc: separate link and link aggregation layer This is the first batch of a longer series that has two main objectives: o Finer lock granularity during message sending and reception, especially regarding usage of the node spinlock. o Better separation between the link layer implementation and the link aggregation layer, represented by node.c::struct tipc_node. Hopefully these changes also make this part of code somewhat easier to comprehend and maintain. ==================== Signed-off-by: -
Jon Paul Maloy authored
We convert packet/message reception according to the same principle we have been using for message sending and timeout handling: We move the function tipc_rcv() to node.c, hence handling the initial packet reception at the link aggregation level. The function grabs the node lock, selects the receiving link, and accesses it via a new call tipc_link_rcv(). This function appends buffers to the input queue for delivery upwards, but it may also append outgoing packets to the xmit queue, just as we do during regular message sending. The latter will happen when buffers are forwarded from the link backlog, or when retransmission is requested. Upon return of this function, and after having released the node lock, tipc_rcv() delivers/tranmsits the contents of those queues, but it may also perform actions such as link activation or reset, as indicated by the return flags from the link. This reduces the number of cpu cycles spent inside the node spinlock, and reduces contention on that lock. Reviewed-by:
Ying Xue <ying.xue@windriver.com> Signed-off-by:
Jon Maloy <jon.maloy@ericsson.com> Signed-off-by:
-
Jon Paul Maloy authored
The logics for determining when a node is permitted to establish and maintain contact with its peer node becomes non-trivial in the presence of multiple parallel links that may come and go independently. A known failure scenario is that one endpoint registers both its links to the peer lost, cleans up it binding table, and prepares for a table update once contact is re-establihed, while the other endpoint may see its links reset and re-established one by one, hence seeing no need to re-synchronize the binding table. To avoid this, a node must not allow re-establishing contact until it has confirmation that even the peer has lost both links. Currently, the mechanism for handling this consists of setting and resetting two state flags from different locations in the code. This solution is hard to understand and maintain. A closer analysis even reveals that it is not completely safe. In this commit we do instead introduce an FSM that keeps track of the conditions for when the node can establish and maintain links. It has six states and four events, and is strictly based on explicit knowledge about the own node's and the peer node's contact states. Only events leading to state change are shown as edges in the figure below. +--------------+ | SELF_UP/ | +---------------->| PEER_COMING |-----------------+ SELF_ | +--------------+ |PEER_ ESTBL_ | | |ESTBL_ CONTACT| SELF_LOST_CONTACT | |CONTACT | v | | +--------------+ | | PEER_ | SELF_DOWN/ | SELF_ | | LOST_ +--| PEER_LEAVING |<--+ LOST_ v +-------------+ CONTACT | +--------------+ | CONTACT +-----------+ | SELF_DOWN/ |<----------+ +----------| SELF_UP/ | | PEER_DOWN |<----------+ +----------| PEER_UP | +-------------+ SELF_ | +--------------+ | PEER_ +-----------+ | LOST_ +--| SELF_LEAVING/|<--+ LOST_ A | CONTACT | PEER_DOWN | CONTACT | | +--------------+ | | A | PEER_ | PEER_LOST_CONTACT | |SELF_ ESTBL_ | | |ESTBL_ CONTACT| +--------------+ |CONTACT +---------------->| PEER_UP/ |-----------------+ | SELF_COMING | +--------------+ Reviewed-by: -
Jon Paul Maloy authored
In our effort to move control of the links to the link aggregation layer, we move the perodic link supervision timer to struct tipc_node. The new timer is shared between all links belonging to the node, thus saving resources, while still kicking the FSM on both its pertaining links at each expiration. The current link timer and corresponding functions are removed. Reviewed-by:
-
Jon Paul Maloy authored
We create a second, simpler, link timer function, tipc_link_timeout(). The new function makes use of the new FSM function introduced in the previous commit, and just like it, takes a buffer queue as parameter. It returns an event bit field and potentially a link protocol packet to the caller. The existing timer function, link_timeout(), is still needed for a while, so we redesign it to become a wrapper around the new function. Reviewed-by:
-
Jon Paul Maloy authored
The link FSM implementation is currently unnecessarily complex. It sometimes checks for conditional state outside the FSM data before deciding next state, and often performs actions directly inside the FSM logics. In this commit, we create a second, simpler FSM implementation, that as far as possible acts only on states and events that it is strictly defined for, and postpone any actions until it is finished with its decisions. It also returns an event flag field and an a buffer queue which may potentially contain a protocol message to be sent by the caller. Unfortunately, we cannot yet make the FSM "clean", in the sense that its decisions are only based on FSM state and event, and that state changes happen only here. That will have to wait until the activate/reset logics has been cleaned up in a future commit. We also rename the link states as follows: WORKING_WORKING -> TIPC_LINK_WORKING WORKING_UNKNOWN -> TIPC_LINK_PROBING RESET_UNKNOWN -> TIPC_LINK_RESETTING RESET_RESET -> TIPC_LINK_ESTABLISHING The existing FSM function, link_state_event(), is still needed for a while, so we redesign it to make use of the new function. Reviewed-by:
-
Jon Paul Maloy authored
As a preparation for later changes, we introduce a new function tipc_link_build_proto_msg(). Instead of actually sending the created protocol message, it only creates it and adds it to the head of a skb queue provided by the caller. Since we still need the existing function tipc_link_protocol_xmit() for a while, we redesign it to make use of the new function. Reviewed-by:
-
Jon Paul Maloy authored
The status flag LINK_STOPPED is not needed any more, since the mechanism for delayed deletion of links has been removed. Likewise, LINK_STARTED and LINK_START_EVT are unnecessary, because we can just as well start the link timer directly from inside tipc_link_create(). We eliminate these flags in this commit. Instead of the above flags, we now introduce three new link modes, TIPC_LINK_OPEN, TIPC_LINK_BLOCKED and TIPC_LINK_TUNNEL. The values indicate whether, and in the case of TIPC_LINK_TUNNEL, which, messages the link is allowed to receive in this state. TIPC_LINK_BLOCKED also blocks timer-driven protocol messages to be sent out, and any change to the link FSM. Since the modes are mutually exclusive, we convert them to state values, and rename the 'flags' field in struct tipc_link to 'exec_mode'. Finally, we move the #defines for link FSM states and events from link.h into enums inside the file link.c, which is the real usage scope of these definitions. Reviewed-by:
-
Jon Paul Maloy authored
Currently, message sending is performed through a deep call chain, where the node spinlock is grabbed and held during a significant part of the transmission time. This is clearly detrimental to overall throughput performance; it would be better if we could send the message after the spinlock has been released. In this commit, we do instead let the call revert on the stack after the buffer chain has been added to the transmission queue, whereafter clones of the buffers are transmitted to the device layer outside the spinlock scope. As a further step in our effort to separate the roles of the node and link entities we also move the function tipc_link_xmit() to node.c, and rename it to tipc_node_xmit(). Reviewed-by:
-
Jon Paul Maloy authored
When the function tipc_link_xmit() is given a buffer list for transmission, it currently consumes the list both when transmission is successful and when it fails, except for the special case when it encounters link congestion. This behavior is inconsistent, and needs to be corrected if we want to avoid problems in later commits in this series. In this commit, we change this to let the function consume the list only when transmission is successful, and leave the list with the sender in all other cases. We also modifiy the socket code so that it adapts to this change, i.e., purges the list when a non-congestion error code is returned. Reviewed-by:
-
Jon Paul Maloy authored
struct tipc_node currently holds two arrays of link pointers; one, indexed by bearer identity, which contains all links irrespective of current state, and one two-slot array for the currently active link or links. The latter array contains direct pointers into the elements of the former. This has the effect that we cannot know the bearer id of a link when accessing it via the "active_links[]" array without actually dereferencing the pointer, something we want to avoid in some cases. In this commit, we do instead store the bearer identity in the "active_links" array, and use this as an index to find the right element in the overall link entry array. This change should be seen as a preparation for the later commits in this series. Reviewed-by:
-
Jon Paul Maloy authored
At present, the link input queue and the name distributor receive queues are fields aggregated in struct tipc_link. This is a hazard, because a link might be deleted while a receiving socket still keeps reference to one of the queues. This commit fixes this bug. However, rather than adding yet another reference counter to the critical data path, we move the two queues to safe ground inside struct tipc_node, which is already protected, and let the link code only handle references to the queues. This is also in line with planned later changes in this area. Reviewed-by:
-
Jon Paul Maloy authored
As a step towards turning links into node internal entities, we move the creation of links from the neighbor discovery logics to the node's link control logics. We also create an additional entry for the link's media address in the newly introduced struct tipc_link_entry, since this is where it is needed in the upcoming commits. The current copy in struct tipc_link is kept for now, but will be removed later. Reviewed-by:
-
Jon Paul Maloy authored
struct 'tipc_node' currently contains two arrays for link attributes, one for the link pointers, and one for the usable link MTUs. We now group those into a new struct 'tipc_link_entry', and intoduce one single array consisting of such enties. Apart from being a cosmetic improvement, this is a starting point for the strict master-slave relation between node and link that we will introduce in the following commits. Reviewed-by:
-
Jiri Benc authored
It's not used anywhere. Signed-off-by:
Jiri Benc <jbenc@redhat.com> Signed-off-by:
-
David S. Miller authored
Scott Feldman says: ==================== switchdev: avoid duplicate packet forwarding v3: - Per Nicolas Dichtel review: remove errant empty union. v2: - Per davem review: in sk_buff, union fwd_mark with secmark to save space since features appear to be mutually exclusive. - Per Simon Horman review: - fix grammar in switchdev.txt wrt fwd_mark - remove some unrelated changes that snuck in v1: This patchset was previously submitted as RFC. No changes from the last version (v2) sent under RFC. Including RFC version history here for reference. RFC v2: - s/fwd_mark/offload_fwd_mark - use consume_skb rather than kfree_skb when dropping pkt on egress. - Use Jiri's suggestion to use ifindex of one of the ports in a group as the mark for all the ports in the group. This can be done with no additional storage (no hashtable from v1). To pull it off, we need some simple recursive routines to walk the netdev tree ensuring all leaves in the tree (ports) in the same group (e.g. bridge) belonging to the same switch device will have the same offload fwd mark. Maybe someone sees a better design for the recusive routines? They're not too bad, and should cover the stacked driver cases. RFC v1: With switchdev support for offloading L2/L3 forwarding data path to a switch device, we have a general problem where both the device and the kernel may forward the packet, resulting in duplicate packets on the wire. Anytime a packet is forwarded by the device and a copy is sent to the CPU, there is potential for duplicate forwarding, as the kernel may also do a forwarding lookup and send the packet on the wire. The specific problem this patch series is interested in solving is avoiding duplicate packets on bridged ports. There was a previous RFC from Roopa (http://marc.info/?l=linux-netdev&m=142687073314252&w=2) to address this problem, but didn't solve the problem of mixed ports in the bridge from different devices; there was no way to exclude some ports from forwarding and include others. This RFC solves that problem by tagging the ingressing packet with a unique mark, and then comparing the packet mark with the egress port mark, and skip forwarding when there is a match. For the mixed ports bridge case, only those ports with matching marks are skipped. The switchdev port driver must do two things: 1) Generate a fwd_mark for each switch port, using some unique key of the switch device (and optionally port). This is done when the port netdev is registered or if the port's group membership changes (joins/leaves a bridge, for example). 2) On packet ingress from port, mark the skb with the ingress port's fwd_mark. If the device supports it, it's useful to only mark skbs which were already forwarded by the device. If the device does not support such indication, all skbs can be marked, even if they're local dst. Two new 32-bit fields are added to struct sk_buff and struct netdevice to hold the fwd_mark. I've wrapped these with CONFIG_NET_SWITCHDEV for now. I tried using skb->mark for this purpose, but ebtables can overwrite the skb->mark before the bridge gets it, so that will not work. In general, this fwd_mark can be used for any case where a packet is forwarded by the device and a copy is sent to the CPU, to avoid the kernel re-forwarding the packet. sFlow is another use-case that comes to mind, but I haven't explored the details. ==================== Signed-off-by:
-
Scott Feldman authored
Signed-off-by:
Scott Feldman <sfeldma@gmail.com> Acked-by:
Jiri Pirko <jiri@resnulli.us> Signed-off-by:
-
Scott Feldman authored
If device flags ingress packet as "fwd offload", mark the skb->offlaod_fwd_mark using the ingress port's dev->offlaod_fwd_mark. This will be the hint to the kernel that this packet has already been forwarded by device to egress ports matching skb->offlaod_fwd_mark. For rocker, derive port dev->offlaod_fwd_mark based on device switch ID and port ifindex. If port is bridged, use the bridge ifindex rather than the port ifindex. Signed-off-by:
-
Scott Feldman authored
skb->offload_fwd_mark and dev->offload_fwd_mark are 32-bit and should be unique for device and may even be unique for a sub-set of ports within device, so add switchdev helper function to generate unique marks based on port's switch ID and group_ifindex. group_ifindex would typically be the container dev's ifindex, such as the bridge's ifindex. The generator uses a global hash table to store offload_fwd_marks hashed by {switch ID, group_ifindex} key. Signed-off-by: -
Scott Feldman authored
Signed-off-by:
-
Scott Feldman authored
Just before queuing skb for xmit on port, check if skb has been marked by switchdev port driver as already fordwarded by device. If so, drop skb. A non-zero skb->offload_fwd_mark field is set by the switchdev port driver/device on ingress to indicate the skb has already been forwarded by the device to egress ports with matching dev->skb_mark. The switchdev port driver would assign a non-zero dev->offload_skb_mark for each device port netdev during registration, for example. Signed-off-by:
Roopa Prabhu <roopa@cumulusnetworks.com> Acked-by:
Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by:
-
Simon Horman authored
Teach rocker to forward packets to CPU when a port is joined to Open vSwitch. There is scope to later refine what is passed up as per Open vSwitch flows on a port. This does not change the behaviour of rocker ports that are not joined to Open vSwitch. Signed-off-by:
Simon Horman <simon.horman@netronome.com> Acked-by:
-
- 20 Jul, 2015 7 commits
-
-
Nikolay Aleksandrov authored
Fix: net/bridge/br_if.c: In function 'br_dev_delete': >> net/bridge/br_if.c:284:2: error: implicit declaration of function >> 'br_multicast_dev_del' [-Werror=implicit-function-declaration] br_multicast_dev_del(br); ^ cc1: some warnings being treated as errors when igmp snooping is not defined. Signed-off-by:Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by:
-
Phil Sutter authored
Newly created flows don't have flowi6_oif set (at least if the associated socket is not interface-bound). This leads to a mismatch in __xfrm6_selector_match() for policies which specify an interface in the selector (sel->ifindex != 0). Backtracing shows this happens in code-paths originating from e.g. ip6_datagram_connect(), rawv6_sendmsg() or tcp_v6_connect(). (UDP was not tested for.) In summary, this patch fixes policy matching on outgoing interface for locally generated packets. Signed-off-by:
Phil Sutter <phil@nwl.cc> Signed-off-by:
-
Nikolay Aleksandrov authored
Get rid of these: drivers/net/bonding//bond_main.c: In function ‘bond_update_slave_arr’: drivers/net/bonding//bond_main.c:3754:6: warning: variable ‘slaves_in_agg’ set but not used [-Wunused-but-set-variable] int slaves_in_agg; ^ CC [M] drivers/net/bonding//bond_3ad.o drivers/net/bonding//bond_3ad.c: In function ‘ad_marker_response_received’: drivers/net/bonding//bond_3ad.c:1870:61: warning: parameter ‘marker’ set but not used [-Wunused-but-set-parameter] static void ad_marker_response_received(struct bond_marker *marker, ^ drivers/net/bonding//bond_3ad.c:1871:19: warning: parameter ‘port’ set but not used [-Wunused-but-set-parameter] struct port *port) ^ Signed-off-by: -
David S. Miller authored
Nikolay Aleksandrov says: ==================== bridge: multicast: temp and perm entries behaviour enhancements Patch 01 adds a notify when a group is deleted via br_multicast_del_pg() (on expire, on device delete or on device down). Patch 02 changes how bridge device and bridge port delete and down/up are handled. Until now on bridge down all groups were flushed, now only the temp ones are (same for port), perm entries are flushed only on port or bridge removal. ==================== Signed-off-by: -
Satish Ashok authored
When the bridge (or port) is brought down/up flush only temp entries and leave the perm ones. Flush perm entries only when deleting the bridge device or the associated port. Signed-off-by:
Satish Ashok <sashok@cumulusnetworks.com> Signed-off-by:
-
Nikolay Aleksandrov authored
Group notifications were not sent when a group expired or was deleted due to bridge/port device being deleted. So add br_mdb_notify() to br_multicast_del_pg(). Signed-off-by:
-
David S. Miller authored
Daniel Borkmann says: ==================== BPF update This small helper allows for accessing net_cls cgroups classid. Please see individual patches for more details. ==================== Signed-off-by:
-
