We fake up a dummy one in all cases because that is the simplest
thing to do and it happens to be necessary for hypervisor systems.
Signed-off-by: David S. Miller <davem@davemloft.net>

Based upon a similar patch for x86_64 written by
Stephen Hemminger.
Signed-off-by: David S. Miller <davem@davemloft.net>

Set but never used.
Signed-off-by: David S. Miller <davem@davemloft.net>

We don't do the "Simba APB is a PBM" bogosity for Sabre
controllers any longer, so this pbms_same_domain thing
is no longer necessary.
Signed-off-by: David S. Miller <davem@davemloft.net>

Implemented but never actually used.
Signed-off-by: David S. Miller <davem@davemloft.net>

All the implementations can be identical and generic, so
no need for controller specific methods.
Signed-off-by: David S. Miller <davem@davemloft.net>

It is only used in one spot and we can just fetch the
OF property right there.
Signed-off-by: David S. Miller <davem@davemloft.net>

Set but never used.
Signed-off-by: David S. Miller <davem@davemloft.net>

It can be done for every PCI configuration using OF properties.
Signed-off-by: David S. Miller <davem@davemloft.net>

The SIMBA APB bridge is strange, it is a PCI bridge but it lacks
some standard OF properties, in particular it lacks a 'ranges'
property.

What you have to do is read the IO and MEM range registers in
the APB bridge to determine the ranges handled by each bridge.
So fill in the bus resources by doing that.

Since we now handle this quirk in the generic PCI and OF device
probing layers, we can flat out eliminate all of that code from
the sabre pci controller driver.

In fact we can thus eliminate completely another quirk of the sabre
driver.  It tried to make the two APB bridges look like PBMs but that
makes zero sense now (and it's questionable whether it ever made sense).
So now just use pbm_A and probe the whole PCI hierarchy using that as
the root.

This simplification allows many future cleanups to occur.

Also, I've found yet another quirk that needs to be worked around
while testing this.  You can't use the 'class-code' OF firmware
property, especially for IDE controllers.  We have to read the value
out of PCI config space or else we'll see the value the device was
showing before it was programmed into native mode.

I'm starting to think it might be wise to just read all of the values
out of PCI config space instead of using the OF properties. :-/
Signed-off-by: David S. Miller <davem@davemloft.net>

Need to traverse recursively down child busses else we only
get the file created under devices at the top-level.
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: David S. Miller <davem@davemloft.net>

The only user was bus_dvma_to_mem() which is no longer used
by any driver, so kill that, and the export of pci_memspace_mask.

The only user now is the PCI mmap support code.
Signed-off-by: David S. Miller <davem@davemloft.net>

Almost entirely taken from the 64-bit PowerPC PCI code.

This allowed to eliminate a ton of cruft from the sparc64
PCI layer.
Signed-off-by: David S. Miller <davem@davemloft.net>

Also, do not try to compute resources by hand, instead use
the pre-computed ones in the of_device.
Signed-off-by: David S. Miller <davem@davemloft.net>

Also, we don't need to store or use the PBM so kill that
from the linux_ebus.
Signed-off-by: David S. Miller <davem@davemloft.net>

Also __sparc__ --> CONFIG_SPARC
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: David S. Miller <davem@davemloft.net>

And use CONFIG_SPARC instead of CONFIG_SPARC64 as the
test.
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: David S. Miller <davem@davemloft.net>

Just like powerpc does.
Signed-off-by: David S. Miller <davem@davemloft.net>

This allows us to simplify sharing code with powerpc which
has properties that have various forms of capitalization
when on the sparc64 side the property is all lower-case.
Signed-off-by: David S. Miller <davem@davemloft.net>

We have several platforms using local copies of identical
code.
Signed-off-by: David S. Miller <davem@davemloft.net>

This starts bringing the PowerPC and Sparc implemetations back closer
together.
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

Finally, we actually change the functions themselves.
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

The only unfortunate bit here is that the name field of struct map_info
is not const, so for now we put a cast on the assignment of it.
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

- Removes days_in_mo[], as it's almost identical to month_days[]
- Use the leapyear() macro
- Line length wrapping.
Signed-off-by: Tony Breeds <tony@bakeyournoodle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

It should return an error code not a boolean.

Based upon an hpet timer fix by Thomas Gleixner.
Signed-off-by: David S. Miller <davem@davemloft.net>

I'd like to thank John Stul and others for helping
me along the way.

A lot of cleanups fell out of this.  For example, the get_compare()
tick_op was totally unused, so was deleted.  And the most often used
tick_op members were grouped together for cache-friendlyness.

The sparc64 TSC is given to the kernel as a one-shot timer.

tick_ops->init_timer() simply turns off the privileged bit in
the tick register (when possible), and disables the interrupt
by setting bit 63 in the compare register.  The ->disable_irq()
op also sets this bit.

tick_ops->add_compare() is changed to:

1) Add the given delta to "tick" not to "compare"
2) Return a boolean which, if true, means that the tick
   value read after writing the compare value was found
   to have incremented past the initial tick value.  This
   mirrors logic used in the HPET driver's ->next_event()
   method.

Each tick_ops implementation also now provides a name string.
And we feed this into the clocksource and clockevents layers.
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: David S. Miller <davem@davemloft.net>

Things were scattered all over the place, split between
SMP and non-SMP.

Unify it all so that dyntick support is easier to add.
Signed-off-by: David S. Miller <davem@davemloft.net>