- 16 Jul, 2007 31 commits
-
-
Jan Beulich authored
.. which modpost started warning about. Signed-off-by:
Jan Beulich <jbeulich@novell.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Paul Mundt authored
Enabling debugging fails to build due to the nodemask variable in do_mbind() having changed names, and then oopses on boot due to the assumption that the nodemask can be dereferenced -- which doesn't work out so well when the policy is changed to MPOL_DEFAULT with a NULL nodemask by numa_default_policy(). This fixes it up, and switches from PDprintk() to pr_debug() while we're at it. Signed-off-by:
Paul Mundt <lethal@linux-sh.org> Cc: Christoph Lameter <clameter@sgi.com> Signed-off-by:
-
Ethan Solomita authored
get_user_pages() can try to allocate a nearly unlimited amount of memory on behalf of a user process, even if that process has been OOM killed. The OOM kill occurs upon return to user space via a SIGKILL, but get_user_pages() will try allocate all its memory before returning. Change get_user_pages() to check for TIF_MEMDIE, and if set then return immediately. Signed-off-by:
Ethan Solomita <solo@google.com> Signed-off-by:
-
Paul Mundt authored
This converts the default system init memory policy to use a dynamically created node map instead of defaulting to all online nodes. Nodes of a certain size (>= 16MB) are judged to be suitable for interleave, and are added to the map. If all nodes are smaller in size, the largest one is automatically selected. Without this, tiny nodes find themselves out of memory before we even make it to userspace. Systems with large nodes will notice no change. Only the system init policy is effected by this change, the regular MPOL_DEFAULT policy is still switched to later on in the boot process as normal. Signed-off-by:
-
Christoph Lameter authored
Add a new configuration variable CONFIG_SLUB_DEBUG_ON If set then the kernel will be booted by default with slab debugging switched on. Similar to CONFIG_SLAB_DEBUG. By default slab debugging is available but must be enabled by specifying "slub_debug" as a kernel parameter. Also add support to switch off slab debugging for a kernel that was built with CONFIG_SLUB_DEBUG_ON. This works by specifying slub_debug=- as a kernel parameter. Dave Jones wanted this feature. http://marc.info/?l=linux-kernel&m=118072189913045&w=2 [akpm@linux-foundation.org: clean up switch statement] Signed-off-by:
Christoph Lameter <clameter@sgi.com> Signed-off-by:
-
Andrew Morton authored
invalidate_mapping_pages() can sometimes take a long time (millions of pages to free). Long enough for the softlockup detector to trigger. We used to have a cond_resched() in there but I took it out because the drop_caches code calls invalidate_mapping_pages() under inode_lock. The patch adds a nasty flag and puts the cond_resched() back. Signed-off-by:
-
Nick Piggin authored
Add a bugcheck for Andrea's pagefault vs invalidate race. This is triggerable for both linear and nonlinear pages with a userspace test harness (using direct IO and truncate, respectively). Signed-off-by:
Nick Piggin <npiggin@suse.de> Signed-off-by:
-
Joe Jin authored
That static `nid' index needs locking. Without it we can end up calling alloc_pages_node() with an illegal node ID and the kernel crashes. Acked-by:
gurudas pai <gurudas.pai@oracle.com> Cc: <stable@kernel.org> Signed-off-by:
-
Anderson Briglia authored
Fix the shrink_list name on some files under mm/ directory. Signed-off-by:
Anderson Briglia <anderson.briglia@indt.org.br> Signed-off-by:
-
Nick Piggin authored
Remove the core slob allocator's minimum alignment restrictions, and instead introduce the alignment restrictions at the slab API layer. This lets us heed the ARCH_KMALLOC/SLAB_MINALIGN directives, and also use __alignof__ (unsigned long) for the default alignment (which should allow relaxed alignment architectures to take better advantage of SLOB's small minimum alignment). Signed-off-by:
Matt Mackall <mpm@selenic.com> Signed-off-by:
-
Nick Piggin authored
Remove the bigblock lists in favour of using compound pages and going directly to the page allocator. Allocation size is stored in page->private, which also makes ksize more accurate than it previously was. Saves ~.5K of code, and 12-24 bytes overhead per >= PAGE_SIZE allocation. Signed-off-by:
-
Nick Piggin authored
Improve slob by turning the freelist into a list of pages using struct page fields, then each page has a singly linked freelist of slob blocks via a pointer in the struct page. - The first benefit is that the slob freelists can be indexed by a smaller type (2 bytes, if the PAGE_SIZE is reasonable). - Next is that freeing is much quicker because it does not have to traverse the entire freelist. Allocation can be slightly faster too, because we can skip almost-full freelist pages completely. - Slob pages are then freed immediately when they become empty, rather than having a periodic timer try to free them. This gives efficiency and memory consumption improvement. Then, we don't encode seperate size and next fields into each slob block, rather we use the sign bit to distinguish between "size" or "next". Then size 1 blocks contain a "next" offset, and others contain the "size" in the first unit and "next" in the second unit. - This allows minimum slob allocation alignment to go from 8 bytes to 2 bytes on 32-bit and 12 bytes to 2 bytes on 64-bit. In practice, it is best to align them to word size, however some architectures (eg. cris) could gain space savings from turning off this extra alignment. Then, make kmalloc use its own slob_block at the front of the allocation in order to encode allocation size, rather than rely on not overwriting slob's existing header block. - This reduces kmalloc allocation overhead similarly to alignment reductions. - Decouples kmalloc layer from the slob allocator. Then, add a page flag specific to slob pages. - This means kfree of a page aligned slob block doesn't have to traverse the bigblock list. I would get benchmarks, but my test box's network doesn't come up with slob before this patch. I think something is timing out. Anyway, things are faster after the patch. Code size goes up about 1K, however dynamic memory usage _should_ be lower even on relatively small memory systems. Future todo item is to restore the cyclic free list search, rather than to always begin at the start. Signed-off-by:
-
Robert P. J. Day authored
Given that there is no remaining usage of the deprecated kmem_cache_t typedef anywhere in the tree, remove that typedef. Signed-off-by:
Robert P. J. Day <rpjday@mindspring.com> Acked-by:
Pekka Enberg <penberg@cs.helsinki.fi> Acked-by:
-
Eric Dumazet authored
alloc_large_system_hash() is called at boot time to allocate space for several large hash tables. Lately, TCP hash table was changed and its bucketsize is not a power-of-two anymore. On most setups, alloc_large_system_hash() allocates one big page (order > 0) with __get_free_pages(GFP_ATOMIC, order). This single high_order page has a power-of-two size, bigger than the needed size. We can free all pages that wont be used by the hash table. On a 1GB i386 machine, this patch saves 128 KB of LOWMEM memory. TCP established hash table entries: 32768 (order: 6, 393216 bytes) Signed-off-by:
Eric Dumazet <dada1@cosmosbay.com> Signed-off-by:
-
Pavel Emelianov authored
This entry prints a header in .start callback. This is OK, but the more elegant solution would be to move this into the .show callback and use seq_list_start_head() in .start one. I have left it as is in order to make the patch just switch to new API and noting more. [adobriyan@sw.ru: Wrong pointer was used as kmem_cache pointer] Signed-off-by:
Pavel Emelianov <xemul@openvz.org> Cc: Christoph Lameter <clameter@sgi.com> Cc: Pekka Enberg <penberg@cs.helsinki.fi> Signed-off-by:
Alexey Dobriyan <adobriyan@sw.ru> Signed-off-by:
-
Rolf Eike Beer authored
Replace a hand coded version of DIV_ROUND_UP(). Signed-off-by:
Rolf Eike Beer <eike-kernel@sf-tec.de> Signed-off-by:
-
Nishanth Aravamudan authored
nid is initialized to numa_node_id() but will either be overwritten in the loop or not used in the conditional. So remove the initialization. Signed-off-by:
Nishanth Aravamudan <nacc@us.ibm.com> Signed-off-by:
-
KAMEZAWA Hiroyuki authored
Make zonelist creation policy selectable from sysctl/boot option v6. This patch makes NUMA's zonelist (of pgdat) order selectable. Available order are Default(automatic)/ Node-based / Zone-based. [Default Order] The kernel selects Node-based or Zone-based order automatically. [Node-based Order] This policy treats the locality of memory as the most important parameter. Zonelist order is created by each zone's locality. This means lower zones (ex. ZONE_DMA) can be used before higher zone (ex. ZONE_NORMAL) exhausion. IOW. ZONE_DMA will be in the middle of zonelist. current 2.6.21 kernel uses this. Pros. * A user can expect local memory as much as possible. Cons. * lower zone will be exhansted before higher zone. This may cause OOM_KILL. Maybe suitable if ZONE_DMA is relatively big and you never see OOM_KILL because of ZONE_DMA exhaution and you need the best locality. (example) assume 2 node NUMA. node(0) has ZONE_DMA/ZONE_NORMAL, node(1) has ZONE_NORMAL. *node(0)'s memory allocation order: node(0)'s NORMAL -> node(0)'s DMA -> node(1)'s NORMAL. *node(1)'s memory allocation order: node(1)'s NORMAL -> node(0)'s NORMAL -> node(0)'s DMA. [Zone-based order] This policy treats the zone type as the most important parameter. Zonelist order is created by zone-type order. This means lower zone never be used bofere higher zone exhaustion. IOW. ZONE_DMA will be always at the tail of zonelist. Pros. * OOM_KILL(bacause of lower zone) occurs only if the whole zones are exhausted. Cons. * memory locality may not be best. (example) assume 2 node NUMA. node(0) has ZONE_DMA/ZONE_NORMAL, node(1) has ZONE_NORMAL. *node(0)'s memory allocation order: node(0)'s NORMAL -> node(1)'s NORMAL -> node(0)'s DMA. *node(1)'s memory allocation order: node(1)'s NORMAL -> node(0)'s NORMAL -> node(0)'s DMA. bootoption "numa_zonelist_order=" and proc/sysctl is supporetd. command: %echo N > /proc/sys/vm/numa_zonelist_order Will rebuild zonelist in Node-based order. command: %echo Z > /proc/sys/vm/numa_zonelist_order Will rebuild zonelist in Zone-based order. Thanks to Lee Schermerhorn, he gives me much help and codes. [Lee.Schermerhorn@hp.com: add check_highest_zone to build_zonelists_in_zone_order] [akpm@linux-foundation.org: build fix] Signed-off-by:
KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Lee Schermerhorn <lee.schermerhorn@hp.com> Cc: Christoph Lameter <clameter@sgi.com> Cc: Andi Kleen <ak@suse.de> Cc: "jesse.barnes@intel.com" <jesse.barnes@intel.com> Signed-off-by:
Lee Schermerhorn <lee.schermerhorn@hp.com> Signed-off-by:
-
Yinghai Lu authored
Beacuse SERIAL_PORT_DFNS is removed from include/asm-i386/serial.h and include/asm-x86_64/serial.h. the serial8250_ports need to be probed late in serial initializing stage. the console_init=>serial8250_console_init=> register_console=>serial8250_console_setup will return -ENDEV, and console ttyS0 can not be enabled at that time. need to wait till uart_add_one_port in drivers/serial/serial_core.c to call register_console to get console ttyS0. that is too late. Make early_uart to use early_param, so uart console can be used earlier. Make it to be bootconsole with CON_BOOT flag, so can use console handover feature. and it will switch to corresponding normal serial console automatically. new command line will be: console=uart8250,io,0x3f8,9600n8 console=uart8250,mmio,0xff5e0000,115200n8 or earlycon=uart8250,io,0x3f8,9600n8 earlycon=uart8250,mmio,0xff5e0000,115200n8 it will print in very early stage: Early serial console at I/O port 0x3f8 (options '9600n8') console [uart0] enabled later for console it will print: console handover: boot [uart0] -> real [ttyS0] Signed-off-by: <yinghai.lu@sun.com> Cc: Andi Kleen <ak@suse.de> Cc: Bjorn Helgaas <bjorn.helgaas@hp.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Gerd Hoffmann <kraxel@suse.de> Signed-off-by:
-
Eric W. Biderman authored
Needed to get fixed virtual address for USB debug and earlycon with mmio. Signed-off-by:
Eric W. Biderman <ebiderman@xmisson.com> Signed-off-by:
Yinghai Lu <yinghai.lu@sun.com> Cc: Andi Kleen <ak@suse.de> Cc: Bjorn Helgaas <bjorn.helgaas@hp.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Gerd Hoffmann <kraxel@suse.de> Signed-off-by:
-
Yinghai Lu authored
for earlyprintk=ttyS0,9600 console=tty0 console=ttyS0,9600n8 the handover will happen from earlyser0 to tty0. but what we want is to hand over to ttyS0. Later with serial-convert-early_uart-to-earlycon-for-8250.patch, console=tty0 console=uart8250,io,0x3f8,9600n8 will handover to ttyS0 instead of tty0. Signed-off-by:
-
Yinghai Lu authored
Change name to buf according to the usage as name + index Signed-off-by:
-
Yinghai Lu authored
Some RS-232 devices require DTR to be asserted before they can be used. DTR is normally asserted in uart_startup() when the port is opened. But we don't actually open serial console ports, so assert DTR when the port is added. BTW: earlyprintk and early_uart are hard coded to set DTR/RTS. rmk says The only issue I can think of is the possibility for an attached modem to auto-answer or maybe even auto-dial before the system is ready for it to do so. Might have an undesirable cost implication for some running with such a setup. Apart from that, I can't think of any other side effect of this specific patch. Signed-off-by:
Russell King <rmk@arm.linux.org.uk> Cc: Andi Kleen <ak@suse.de> Cc: Bjorn Helgaas <bjorn.helgaas@hp.com> Cc: Gerd Hoffmann <kraxel@suse.de> Signed-off-by:
-
Kristian Hoegsberg authored
Remove all ids from the given idr tree. idr_destroy() only frees up unused, cached idp_layers, but this function will remove all id mappings and leave all idp_layers unused. A typical clean-up sequence for objects stored in an idr tree, will use idr_for_each() to free all objects, if necessay, then idr_remove_all() to remove all ids, and idr_destroy() to free up the cached idr_layers. Signed-off-by:
Kristian Hoegsberg <krh@redhat.com> Cc: Tejun Heo <htejun@gmail.com> Cc: Dave Airlie <airlied@linux.ie> Signed-off-by:
-
Kristian Hoegsberg authored
This patch adds an iterator function for the idr data structure. Compared to just iterating through the idr with an integer and idr_find, this iterator is (almost, but not quite) linear in the number of elements, as opposed to the number of integers in the range covered by the idr. This makes a difference for sparse idrs, but more importantly, it's a nicer way to iterate through the elements. The drm subsystem is moving to idr for tracking contexts and drawables, and with this change, we can use the idr exclusively for tracking these resources. [akpm@linux-foundation.org: fix comment] Signed-off-by:
-
Andy Whitcroft authored
This version brings a number of new checks, fixes for flase positives, plus a clarification of the output to better guide use. Of note: - checks for documentation for new __setup calls - clearer reporting where braces and parenthesis are involved - reports for closing brace and semi-colon spacing - reports on unwanted externs This patch includes an update to the documentation on checkpatch.pl itself to clarify when it should be used and to indicate that it is not intended as the final arbitor of style. Full changelog: Andy Whitcroft (19): Version: 0.07 ensure we do not apply control brace checks to preprocesor directives add {u,s}{8,16,32,64} to the type matcher accept lack of spacing after the semicolons in for (;;) report new externs in .c files fix up typedef exclusion for function prototypes else trailing statements check need to account for \ at end of line add enums to the type matcher add missing check descriptions suppress double reporting of ** spacing report on do{ spacing issues include an example of the brace/parenthesis in output check for spacing after closing braces prevent double reports on pointer spacing issues handle blank continuation lines on macros classify all reports error, warning, or check revamp hanging { checks and apply in context no spaces after the last ; in a for is ok check __setup has a corresponding addition to documentation David Woodhouse (1): limit character set used in patches and descriptions to UTF-8 Signed-off-by:Andy Whitcroft <apw@shadowen.org> Cc: David Woodhouse <dwmw2@infradead.org> Cc: "Randy.Dunlap" <rdunlap@xenotime.net> Signed-off-by:
-
Nitin Gupta authored
This is a correction for a macro which gives worst case compressed data size by LZO1X. This patch was provided by the LZO author (Markus Oberhumer). Signed-off-by:
Nitin Gupta <nitingupta910@gmail.com> Cc: "Markus F.X.J. Oberhumer" <markus@oberhumer.com> Cc: "Richard Purdie" <rpurdie@openedhand.com> Signed-off-by:
-
Nelson, Shannon authored
Add entries to MAINTAINERS for I/OAT and DMAENGINE Signed-off-by:
Shannon Nelson <shannon.nelson@intel.com> Cc: Chris Leech <christopher.leech@intel.com> Signed-off-by:
-
Jan Kara authored
We have to check that also the second checkpoint list is non-empty before dropping the transaction. Signed-off-by:
Jan Kara <jack@suse.cz> Cc: Chuck Ebbert <cebbert@redhat.com> Cc: Kirill Korotaev <dev@openvz.org> Cc: <linux-ext4@vger.kernel.org> Cc: <stable@kernel.org> Signed-off-by:
-
Jan Kara authored
We have to check that also the second checkpoint list is non-empty before dropping the transaction. Signed-off-by:
-
Andrew Morton authored
Recent breakage.. net/sunrpc/auth_gss/auth_gss.c:1002: warning: implicit declaration of function 'lock_kernel' net/sunrpc/auth_gss/auth_gss.c:1004: warning: implicit declaration of function 'unlock_kernel' Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Cc: "J. Bruce Fields" <bfields@fieldses.org> Signed-off-by:
-
- 15 Jul, 2007 9 commits
-
-
git://git.infradead.org/battery-2.6Linus Torvalds authored
* git://git.infradead.org/battery-2.6: git-battery vs git-acpi Power supply class and drivers: remove non obligatory return statements pda_power: clean up irq, timer MAINTAINERS: Add maintainers for power supply subsystem and drivers Fixed up trivial conflict in drivers/w1/slaves/w1_ds2760.c manually
-
Linus Torvalds authored
* master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (166 commits) [SCSI] ibmvscsi: convert to use the data buffer accessors [SCSI] dc395x: convert to use the data buffer accessors [SCSI] ncr53c8xx: convert to use the data buffer accessors [SCSI] sym53c8xx: convert to use the data buffer accessors [SCSI] ppa: coding police and printk levels [SCSI] aic7xxx_old: remove redundant GFP_ATOMIC from kmalloc [SCSI] i2o: remove redundant GFP_ATOMIC from kmalloc from device.c [SCSI] remove the dead CYBERSTORMIII_SCSI option [SCSI] don't build scsi_dma_{map,unmap} for !HAS_DMA [SCSI] Clean up scsi_add_lun a bit [SCSI] 53c700: Remove printk, which triggers because of low scsi clock on SNI RMs [SCSI] sni_53c710: Cleanup [SCSI] qla4xxx: Fix underrun/overrun conditions [SCSI] megaraid_mbox: use mutex instead of semaphore [SCSI] aacraid: add 51245, 51645 and 52245 adapters to documentation. [SCSI] qla2xxx: update version to 8.02.00-k1. [SCSI] qla2xxx: add support for NPIV [SCSI] stex: use resid for xfer len information [SCSI] Add Brownie 1200U3P to blacklist [SCSI] scsi.c: convert to use the data buffer accessors ... -
Linus Torvalds authored
* 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: (53 commits) [TCP]: Verify the presence of RETRANS bit when leaving FRTO [IPV6]: Call inet6addr_chain notifiers on link down [NET_SCHED]: Kill CONFIG_NET_CLS_POLICE [NET_SCHED]: act_api: qdisc internal reclassify support [NET_SCHED]: sch_dsmark: act_api support [NET_SCHED]: sch_atm: act_api support [NET_SCHED]: sch_atm: Lindent [IPV6]: MSG_ERRQUEUE messages do not pass to connected raw sockets [IPV4]: Cleanup call to __neigh_lookup() [NET_SCHED]: Revert "avoid transmit softirq on watchdog wakeup" optimization [NETFILTER]: nf_conntrack: UDPLITE support [NETFILTER]: nf_conntrack: mark protocols __read_mostly [NETFILTER]: x_tables: add connlimit match [NETFILTER]: Lower *tables printk severity [NETFILTER]: nf_conntrack: Don't track locally generated special ICMP error [NETFILTER]: nf_conntrack: Introduces nf_ct_get_tuplepr and uses it [NETFILTER]: nf_conntrack: make l3proto->prepare() generic and renames it [NETFILTER]: nf_conntrack: Increment error count on parsing IPv4 header [NET]: Add ethtool support for NETIF_F_IPV6_CSUM devices. [AF_IUCV]: Add lock when updating accept_q ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fsLinus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs: 9p: fix a race condition bug in umount which caused a segfault 9p: re-enable mount time debug option 9p: cache meta-data when cache=loose net/9p: set error to EREMOTEIO if trans->write returns zero net/9p: change net/9p module name to 9pnet 9p: Reorganization of 9p file system code
-
git://oss.sgi.com:8090/xfs/xfs-2.6Linus Torvalds authored
* 'for-linus' of git://oss.sgi.com:8090/xfs/xfs-2.6: (37 commits) [XFS] Fix lockdep annotations for xfs_lock_inodes [LIB]: export radix_tree_preload() [XFS] Fix XFS_IOC_FSBULKSTAT{,_SINGLE} & XFS_IOC_FSINUMBERS in compat mode [XFS] Compat ioctl handler for handle operations [XFS] Compat ioctl handler for XFS_IOC_FSGEOMETRY_V1. [XFS] Clean up function name handling in tracing code [XFS] Quota inode has no parent. [XFS] Concurrent Multi-File Data Streams [XFS] Use uninitialized_var macro to stop warning about rtx [XFS] XFS should not be looking at filp reference counts [XFS] Use is_power_of_2 instead of open coding checks [XFS] Reduce shouting by removing unnecessary macros from dir2 code. [XFS] Simplify XFS min/max macros. [XFS] Kill off xfs_count_bits [XFS] Cancel transactions on xfs_itruncate_start error. [XFS] Use do_div() on 64 bit types. [XFS] Fix remount,readonly path to flush everything correctly. [XFS] Cleanup inode extent size hint extraction [XFS] Prevent ENOSPC from aborting transactions that need to succeed [XFS] Prevent deadlock when flushing inodes on unmount ...
-
Al Viro authored
It depends on tristate I2C and it's trivial to make modular. The current Kconfig allows I2C=m, I2C_ACORN=y, which doesn't work at all; alternatives are dependency on I2C=y and making I2C_ACORN itself a tristate. The latter is the right thing to do... Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
Russell King <rmk+kernel@arm.linux.org.uk>
-
Al Viro authored
Signed-off-by:
-
Al Viro authored
Fallout from commit 91a69029 ('sysfs: add parameter "struct bin_attribute *" ...') Signed-off-by:
-
Al Viro authored
Signed-off-by:
-
