An error occurred fetching the project authors.
- 30 Aug, 2005 5 commits
-
-
Takashi Iwai authored
HDA Codec driver Use struct instead of array to improve the readability of hda_codec.c. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Nicolas Graziano authored
HDA Codec driver The insertion of the rate 9600 make a shift in detection of supported rate, put this rate at the end of the list. Signed-off-by: Nicolas Graziano <nicolas.graziano@wanadoo.fr> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Sasha Khapyorsky authored
HDA Codec driver,HDA generic driver Summar: hda-codec - MFG support This adds Modem Functional Group (MFG) support and option for 9600 sample rate. Signed-off-by: Sasha Khapyorsky <sashak@smlink.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Nicolas Graziano authored
HDA Codec driver Fixed LFE volume/switch control. Signed-off-by: Nicolas Graziano <nicolas.graziano@wanadoo.fr> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
HDA Codec driver - Fixed the reordering of surround channels. Originally reported by Nicolas GRAZIANO <nicolas.graziano@wanadoo.fr>. - Show the selected ssid when debug option is set. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
- 22 Jun, 2005 4 commits
-
-
Takashi Iwai authored
Documentation,HDA Codec driver,HDA generic driver,HDA Intel driver - Fix some invalid configurations, typos in the last patch - Make init_verbs chainable, so that different configs can share the same init_verbs - Reorder and clean up the source codes in patch_realtek.c - Add the pin default configuration parser, used commonly in cmedia and realtek patch codes. - Add 'auto' model to ALC880 for auto-configuration from BIOS Use this model as default, and 3-stack as fallback Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
HDA Codec driver Allow sub_device=0 in board config check. This means that every device with the given sub vendor ID will match. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
HDA Codec driver Feed front signals to all surround channels if no data is given for surround channels. It seems that CLFE works as expected (only center outputs) even if connected from the front line - at least on my test system. If this change causes problems on other system (e.g. only the left channel is transferred to the center channel), please let me know... Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
HDA Codec driver Fixed the handling of amp cache in hda-codec driver. The confliction of cache values with different indices should be fixed now. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
- 29 May, 2005 7 commits
-
-
Takashi Iwai authored
HDA Codec driver Added the missing vendor name entry for Analog Devices. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
HDA Codec driver Suppressing the error message regarding no AFG. This is often harmless (e.g. probing a modem codec). Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Adrian Bunk authored
CA0106 driver,HDA Codec driver This patch makes needlessly global code static. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
HDA Codec driver,HDA generic driver Renamed pci_vendor/pci_device fields to pci_subvendor/pci_subdevice. They are really PCI subsystem IDs. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
HDA Codec driver Fix and cleanup of CM9880 automatic PIN configuration. snd_hda_codec_setup_stream() doesn't do anything when NID is 0. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
HDA Codec driver Removed the dead (duplicated) code. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Matt authored
HDA generic driver,HDA Codec driver Add initial SigmaTel codec support for 9200 and 922x. Note that this hda patch relies on the configuration default registers to be set correctly (normally by BIOS/firmware) in order for it to set up pin widgets properly. There's a test switch in the patch so it will work with the SigmaTel reference boards that are usually plugged into a system that doesn't set the configuration default registers. It supports 2 channel analog out and line/mic in. I plan to add >2 channel support and spdif support shortly. Please apply. Signed-off-by: Matt <matt@embeddedalley.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
- 16 Apr, 2005 1 commit
-
-
Linus Torvalds authored
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
-