- 21 Mar, 2006 40 commits
-
-
Adrian Bunk authored
This patch contains the following possible cleanups: - make needlessly global code static - #if 0 the following unused global functions: - name_table.c: tipc_nametbl_print() - name_table.c: tipc_nametbl_dump() - net.c: tipc_net_next_node() Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Per Liden <per.liden@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Per Liden authored
Signed-off-by: Per Liden <per.liden@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Sam Ravnborg authored
With reference to latest discussions on linux-kernel with respect to inline here is a patch for tipc to remove all inlines as used in the .c files. See also chapter 14 in Documentation/CodingStyle. Before: text data bss dec hex filename 102990 5292 1752 110034 1add2 tipc.o Now: text data bss dec hex filename 101190 5292 1752 108234 1a6ca tipc.o This is a nice text size reduction which will improve icache usage. In some cases bigger (> 4 lines) functions where declared inline and used in many places, they are most probarly no longer inlined by gcc resulting in the size reduction. There are several one liners that no longer are declared inline, but gcc should inline these just fine without the inline hint. With this patch applied one warning is added about an unused static function - that was hidded by utilising inline before. The function in question were kept so this patch is solely a inline removal patch. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Per Liden <per.liden@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Sam Ravnborg authored
Tried to run the new tipc stack through sparse. Following patch fixes all cases where 0 was used as replacement of NULL. Use NULL to document this is a pointer and to silence sparse. This brough sparse warning count down with 127 to 24 warnings. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Per Liden <per.liden@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
net/ipv4/netfilter/ip_nat_snmp_basic.c: In function 'asn1_header_decode': net/ipv4/netfilter/ip_nat_snmp_basic.c:248: warning: 'len' may be used uninitialized in this function net/ipv4/netfilter/ip_nat_snmp_basic.c:248: warning: 'def' may be used uninitialized in this function net/ipv4/netfilter/ip_nat_snmp_basic.c: In function 'snmp_translate': net/ipv4/netfilter/ip_nat_snmp_basic.c:672: warning: 'l' may be used uninitialized in this function net/ipv4/netfilter/ip_nat_snmp_basic.c:668: warning: 'type' may be used uninitialized in this function Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ingo Molnar authored
Semaphore to mutex conversion. The conversion was generated via scripts, and the result was validated automatically via a script as well. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Alexey Dobriyan authored
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Sam Ravnborg authored
In latest -mm sbni gives following warning: WARNING: drivers/net/wan/sbni.o - Section mismatch: reference to \ .init.data: from .text between 'init_module' (at offset 0x14ef) and \ 'cleanup_module' The warning is caused by init_module() calling a function declared __init. Declare init_module() __init too to fix warning. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ingo Molnar authored
Semaphore to mutexes conversion. The conversion was generated via scripts, and the result was validated automatically via a script as well. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ingo Molnar authored
Semaphore to mutexes conversion. The conversion was generated via scripts, and the result was validated automatically via a script as well. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Andrew Morton authored
MODULE_PARM() is deprecated and is about to go away altogether. Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Arjan van de Ven authored
Semaphore to mutex conversion. The conversion was generated via scripts, and the result was validated automatically via a script as well. Signed-off-by: Arjan van de Ven <arjan@infradead.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Arjan van de Ven authored
Semaphore to mutex conversion. The conversion was generated via scripts, and the result was validated automatically via a script as well. Signed-off-by: Arjan van de Ven <arjan@infradead.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Stephen Hemminger authored
Get rid of the old __dev_put macro that is just a hold over from pre 2.6 kernel. And turn dev_hold into an inline instead of a macro. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Arnaldo Carvalho de Melo authored
And not the silly LIMIT_NETDEBUG and silently return without inserting the option requested. Also drop some old debugging messages associated to option insertion. Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Arnaldo Carvalho de Melo authored
Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Arnaldo Carvalho de Melo authored
Merging it with its only user: dccp_v[46]_reqsk_send_ack. Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Arnaldo Carvalho de Melo authored
Using this also provides opportunities for introducing inet_csk_alloc_skb that would call alloc_skb, account it to the sock and skb_reserve(max_header), but I'll leave this for later, for now using sk_prot->max_header consistently is enough. Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Arnaldo Carvalho de Melo authored
I.e. they should be just ignored, but we have to use 'break', not 'continue', as we have to possibly reset the mandatory flag. Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Signed-off-by: David S. Miller <davem@davemloft.net>
-
Michael Chan authored
Update version to 3.52. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Michael Chan authored
Add fw_version information to ethtool -i. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Michael Chan authored
Some nvram related cleanup: 1. Add a tg3_nvram_read_swab() since swabing the data is frequently done. 2. Add a function to convert nvram address to physical address instead of doing it in 2 separate places. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Michael Chan authored
Ethtool memory test on 5787 requires a new memory table. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Michael Chan authored
Support one-shot MSI on 5787. This one-shot MSI idea is credited to David Miller. In this mode, MSI disables itself automatically after it is generated, saving the driver a register access to disable it for NAPI. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Michael Chan authored
Support ipv6 tx csum on 5787 by setting NETIF_F_HW_CSUM. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Michael Chan authored
Support 5787 hardware TSO using a new flag TG3_FLG2_HW_TSO_2. Since the TSO interface is slightly different and these chips have finally fixed the 4GB DMA problem and do not have the 40-bit DMA problem, a new hard_start_xmit is used for these chips. All previous chips will use the old hard_start_xmit that is now renamed tg3_start_xmit_dma_bug(). Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Michael Chan authored
Support additional nvrams and new nvram format for 5787 and 5754. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Michael Chan authored
Add basic support for 2 new chips 5787 and 5754. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Benjamin LaHaise authored
Here's an updated copy of the patch to use fget_light in net/socket.c. Rerunning the tests show a drop of ~80Mbit/s on average, which looks bad until you see the drop in cpu usage from ~89% to ~82%. That will get fixed in another patch... Before: max 8113.70, min 8026.32, avg 8072.34 87380 16384 16384 10.01 8045.55 87.11 87.11 1.774 1.774 87380 16384 16384 10.01 8065.14 90.86 90.86 1.846 1.846 87380 16384 16384 10.00 8077.76 89.85 89.85 1.822 1.822 87380 16384 16384 10.00 8026.32 89.80 89.80 1.833 1.833 87380 16384 16384 10.01 8108.59 89.81 89.81 1.815 1.815 87380 16384 16384 10.01 8034.53 89.01 89.01 1.815 1.815 87380 16384 16384 10.00 8113.70 90.45 90.45 1.827 1.827 87380 16384 16384 10.00 8111.37 89.90 89.90 1.816 1.816 87380 16384 16384 10.01 8077.75 87.96 87.96 1.784 1.784 87380 16384 16384 10.00 8062.70 90.25 90.25 1.834 1.834 After: max 8035.81, min 7963.69, avg 7998.14 87380 16384 16384 10.01 8000.93 82.11 82.11 1.682 1.682 87380 16384 16384 10.01 8016.17 83.67 83.67 1.710 1.710 87380 16384 16384 10.01 7963.69 83.47 83.47 1.717 1.717 87380 16384 16384 10.01 8014.35 81.71 81.71 1.671 1.671 87380 16384 16384 10.00 7967.68 83.41 83.41 1.715 1.715 87380 16384 16384 10.00 7995.22 81.00 81.00 1.660 1.660 87380 16384 16384 10.00 8002.61 83.90 83.90 1.718 1.718 87380 16384 16384 10.00 8035.81 81.71 81.71 1.666 1.666 87380 16384 16384 10.01 8005.36 82.56 82.56 1.690 1.690 87380 16384 16384 10.00 7979.61 82.50 82.50 1.694 1.694 Signed-off-by: Benjamin LaHaise <bcrl@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Stephen Hemminger authored
The functions list_del followed by list_add_tail is equivalent to the existing inline list_move_tail. list_move_tail avoids unnecessary _LIST_POISON. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Alpt authored
The Netsukuku daemon is using the same number to mark its routes, you can see it here: http://hinezumilabs.org/cgi-bin/viewcvs.cgi/netsukuku/src/krnl_route.h?rev=HEAD&content-type=text/vnd.viewcvs-markupSigned-off-by: David S. Miller <davem@davemloft.net>
-
Michael S. Tsirkin authored
struct neigh_ops currently has a destructor field, which no in-kernel drivers outside of infiniband use. The infiniband/ulp/ipoib in-tree driver stashes some info in the neighbour structure (the results of the second-stage lookup from ARP results to real link-level path), and it uses neigh->ops->destructor to get a callback so it can clean up this extra info when a neighbour is freed. We've run into problems with this: since the destructor is in an ops field that is shared between neighbours that may belong to different net devices, there's no way to set/clear it safely. The following patch moves this field to neigh_parms where it can be safely set, together with its twin neigh_setup. Two additional patches in the patch series update ipoib to use this new interface. Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Luiz Capitulino authored
Due to the thread's lock changes, we're at a new version now. Signed-off-by: Luiz Capitulino <lcapitulino@mandriva.com.br> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Luiz Capitulino authored
As suggested by Arnaldo, this patch replaces the thread_lock()/thread_unlock() by directly calls to mutex_lock()/mutex_unlock(). This change makes the code a bit more readable, and the direct calls are used everywhere in the kernel. Signed-off-by: Luiz Capitulino <lcapitulino@mandriva.com.br> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Luiz Capitulino authored
pktgen's thread semaphores are strict mutexes, convert them to the mutex implementation. Signed-off-by: Luiz Capitulino <lcapitulino@mandriva.com.br> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Stephen Hemminger authored
This patch turns the RTNL from a semaphore to a new 2.6.16 mutex and gets rid of some of the leftover legacy. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
First, it warns when PAGE_SIZE >= 64K because the ctx_len field is 16-bits. Secondly, if there are any real length limitations it can be verified by the security layer security_xfrm_state_alloc() call. Signed-off-by: David S. Miller <davem@davemloft.net>
-
Baruch Even authored
Instead of estimating the time since the last congestion event, count it directly. Signed-off-by: Baruch Even <baruch@ev-en.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-