- 19 Mar, 2019 40 commits
-
-
Huang Rui authored
This patch adds interface to get dal power level for display and in smu v11 didn't have this implementation. Signed-off-by:
Huang Rui <ray.huang@amd.com> Reviewed-by:
Kevin Wang <Kevin1.Wang@amd.com> Acked-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Huang Rui authored
This patch adds interface to request display clock voltage, display will use it to request current display clock voltage. Signed-off-by:
Evan Quan <evan.quan@amd.com> Signed-off-by:
-
Huang Rui authored
This patch adds inteface to get clock by type with voltage, display will use it to get current clocks with voltage. Signed-off-by:
-
Huang Rui authored
This patch adds get clock by type with latency, display will use it to get current clocks with latency. v2: fix the missed mutex lock before return. Signed-off-by:
-
Huang Rui authored
This patch adds interface to get max high clocks for display and in smu v11 didn't have this implementation. Signed-off-by:
-
Huang Rui authored
This patch adds get_clock_by_type interface for display, in smu v11 didn't have the implementation. Signed-off-by:
-
Huang Rui authored
This patch adds display configuration change function that creates the new path with sw smu driver instead of powerplay. Signed-off-by:
-
Huang Rui authored
This patch adds two interfaces to set_active_display_count and store_cc6_data, they won't be used for smu11, and just be the placeholders for future asic on display to smu interface. Signed-off-by:
-
Huang Rui authored
This patch adds the function to set deep sleep dcefclk. It will be used on display part. Signed-off-by:
-
Kevin Wang authored
the SMU v11 doesn’t support pp_force_state so far, so we didn’t implement it. Signed-off-by:
-
Kevin Wang authored
add function of smu_get_currente_state for sw-smu. v2: fix code typo error if (ret); Signed-off-by:
-
Kevin Wang authored
add function smu_get_power_num_state function for sw-smu. it's only for sysfs interface, the power state feature is not ready for sw-smu. Signed-off-by:
-
Kevin Wang authored
add sensor interface of feature mask for debugfs. this interface is not ip related function, so need move high level file to implement (amdgpu_smu) Signed-off-by:
-
Kevin Wang authored
add sensor interface of gfx vdd for hwmon Signed-off-by:
-
Kevin Wang authored
add sensor interface of get gpu power for debugfs and hwmon. Signed-off-by:
-
Kevin Wang authored
add sensor interface of thermal temperature for debugfs and hwmon. Signed-off-by:
-
Kevin Wang authored
add sensor interface of SCLK and MCKL for sys interface and hwmon. Signed-off-by:
-
Likun Gao authored
Add function to set sclk or mclk level for smu11. Signed-off-by:
Likun Gao <Likun.Gao@amd.com> Reviewed-by:
-
Likun Gao authored
Add function to support gfx_clk and mem_clk upload min and max dpm level for smu11. Signed-off-by:
-
Kevin Wang authored
add pp_table sysfs interface for new sw-smu. get: return pptable raw data set: write pptable raw data to pptable, then reset smu (hw_fini -> hw_init) v2: fix mutex lock issue Signed-off-by:
-
Kevin Wang authored
add interface amdgpu_get_busy_percent for smu11 v2: convert data pointer type to uint32_t *. Signed-off-by:
-
Kevin Wang authored
add this helper to check new sw-smu support. Signed-off-by:
-
Kevin Wang authored
sometime, the driver need changed table data between driver and smu. this function can help update table data Signed-off-by:
-
Likun Gao authored
Add function to start thermal control for smu11 when smu hw_init. Signed-off-by:
-
Likun Gao authored
Add function of smu_v11_0_set_thermal_fan_table to set fan table for smu11. Signed-off-by:
-
Likun Gao authored
Add function to enable thermal alerts on thermal control for smu11. Signed-off-by:
-
Likun Gao authored
Add the function to set the correct min and max thermal value for smu11 Signed-off-by:
-
Likun Gao authored
Add the function to get the min and max thermal value for vega20 with smu11 architecture. Signed-off-by:
-
Huang Rui authored
This patch adds get_max_sustainable_clock function for smu11. Signed-off-by:
-
Likun Gao authored
Add function to print current levels for smu11. v2: expose get_current_clk_freq for smu v11. (Kevin) Signed-off-by:
-
Kevin Wang authored
This patch implements get_current_clk_freq for smu11 future use. Signed-off-by:
-
Likun Gao authored
Add smu_v11_0_get_power_limit function to get power limit vaule. v2: update "set" to "get", it only implements "get" behavior. (Alex) Signed-off-by:
-
Likun Gao authored
Add vega20_populate_umd_state_clk function to set pstate_sclk and pstate_mclk. Signed-off-by:
-
Likun Gao authored
Add smu_set_default_dpm_table function to set dpm table for smu11. Modified the sequence to populate smc pptable, as it should be done after related dpm feature is enabled. Signed-off-by:
-
Kevin Wang authored
add smu_notify_display_change function to send msg to smc to notify display is changed. Signed-off-by:
-
Kevin Wang authored
add smu feature operation function helper to deal with smu feature bitmap. Signed-off-by:
-
Kevin Wang authored
each ip will support different smu feature, the driver use bitmap to management this feature. bitmap: -allowed: sw driver to enable & disable some feature when driver init. -suppored: the feature is supproed. -enabled: the feature is enabled. Signed-off-by:
-
Kevin Wang authored
Add smu_run_afll_btc function to send msg to smc to start run afll btc. Signed-off-by:
-
Kevin Wang authored
Add smu_init_display function to send msg to smc to init display. Signed-off-by:
-
Likun Gao authored
Change the allocate method of dpm context as dpm_table is different bewteen vega20 and smu11. Signed-off-by:
-
