From: Andi Kleen <ak@suse.de>

The recent IA64 changes for /proc/kcore broke the access on i386.
Currently no notes are written for the direct mapped or vmalloced memory,
which makes gdb reject it.

This patch fixes it.  Other ports probably need to do the same changes.

If you open /dev/ram7 when the kernel is configured for 4 ramdisks, things
blow up.  Teach rd_open() to check that the minor is in range.

If someome tries to unmount the fs while kjournald is performing a commit,
kjournald forgets to look for the termination request and goes into permanent
sleep.

The memset which is performed if access_ok() fails got lost in the
copy_*_user() rework.  Put it back.

Bloats the kernel by 8k :(

Also contains a few related #includes and whitespace fixlets from
Joshua Kwan <joshk@triplehelix.org>

into home.transmeta.com:/home/torvalds/v2.5/linux

This is an update for the SiS IDE driver.

This is a 99% Vojtech work :
- Independant southbridge detection (no need to add current and future
  MuTIOL northbridge PCI ids knowledge to the driver),
- Lots of code cleanup,
- Debug code removed (unused for a while, I will maintain it in my tree
  if needed),

I changed some things:
- the new config_xfer_rate is commented out until ide_find_best_mode is
  patched for bad drive handling (until then I reverted to the old one
  using the config_drive_xfer_rate helper function).

Hi Greg.  Ivan's not happy with the solution I came up with for naming
/proc/bus/pci and Anton would prefer something slightly different too,
so I abstracted the name out so each architecture can do its own thing.

This is against 2.5.72 so won't apply cleanly to your tree (it
applies to bitkeeper as of a few minutes ago with only minor offsets).
I've implemented the original name for non-PCI-domain machines; done what
ia64 and alpha need, respectively (assuming I didn't misunderstand Ivan),
and plopped in the Old Way of doing things for Sparc64, PPC and PPC64.
Maintainers may alter this to whatever degree of complexity they wish.

into kroah.com:/home/greg/linux/BK/pci-2.5

into home.transmeta.com:/home/torvalds/v2.5/linux

into home.transmeta.com:/home/torvalds/v2.5/linux

into home.transmeta.com:/home/torvalds/v2.5/linux

While there is a separate driver for 2104x tulips (CONFIG_DE2104X),
drivers/net/tulip/Kconfig states that CONFIG_TULIP also supports
2104x tulips. This is not the case since that support was removed
in December 2001. A user with an old tulip may thus be tricked into
configuring the wrong driver. (I was, on my PMac 4400.)

The patch below removes this misinformation from tulip's Kconfig.

(pulled change from 2.4)

the second patch:
replaces busy_loop with a simple macro doing a schedule_timeout. busy_loop was never
called from interrupt conext anyway, so no need for that. and the sti() is gone.

rgds
-daniel

hi

this patch does:
- net_device is no longer allocated as part of the driver's private structure,
  instead it's allocated via alloc_netdev
- xirc2ps_detach calls xirc2ps_release if necessary (like the other drivers)

against 2.5.70-bk.

rgds
-daniel

drivers/net/pcnet32.c: In function `pcnet32_init_ring':
drivers/net/pcnet32.c:1006: warning: comparison between pointer and integer

According to a report the my_inet_aton code in bond_main.c is copied
from 4.4BSD, but it doesn't carry a BSD copyright license. In addition
it is somewhat redundant with the standard in_aton.  Convert it
to use the linux function.

Error handling is a bit worse than before, but not much.

Patch for 2.5 bonding. The 2.4 version has the same problem, but afaik
it is scheduled to be replaced by the 2.5 codebase anyways.

-Andi

1) Use unsigned long for types holding jiffies.
2) Use size_t for read/write buffer lengths.
3) Use proper printf format string for size_t.

into groveronline.com:/root/bk/linux-acpi

- Fix To/FromBCD, eliminating the need for an arch-specific #define
- Do not acquire a semaphore in the S5 shutdown path
- Fix ex_digits_needed for 0 (Takayoshi Kochi)
- Fix sleep/stall code reversal (Andi Kleen)
- Revert a change having to do with control method calling semantics

1) Use proper size_t printf format specifier
2) Cast pointers properly when passing them to hashfind
3) Print pointers using proper printf format specifier
   instead of using ugly casts.

1) Do not pass NULL into cpu_to_le32(), use plain zero.
2) When storing DMA addresses to SCp.ptr, cast to ulong.

1) Use proper size_t printf format specifier.
2) Eliminate non-portable struct pointer casts
   used to calculate DMA structure offsets.