- 03 Jun, 2015 4 commits
-
-
Yair Shachar authored
This patch adds support for static user-mode queues in QCM. Queues which are designated as static can NOT be preempted by the CP microcode when it is executing its scheduling algorithm. This is needed for supporting the debugger feature, because we can't allow the CP to preempt queues which are currently being debugged. The number of queues that can be designated as static is limited by the number of HQDs (Hardware Queue Descriptors). Signed-off-by:
Yair Shachar <yair.shachar@amd.com> Signed-off-by:
Oded Gabbay <oded.gabbay@gmail.com>
-
Yair Shachar authored
This patch adds four new IOCTLs to amdkfd. These IOCTLs expose a H/W debugger functionality to the userspace. The IOCTLs are: - AMDKFD_IOC_DBG_REGISTER: The purpose of this IOCTL is to notify amdkfd that a process wants to use GPU debugging facilities on itself only. It is expected that this IOCTL would be called before any other H/W debugger requests are sent to amdkfd and for each GPU where the H/W debugging needs to be enabled. The use of this IOCTL ensures that only one instance of a debugger is active in the system. - AMDKFD_IOC_DBG_UNREGISTER: This IOCTL detaches the debugger/debugged process from the H/W Debug which was established by the AMDKFD_IOC_DBG_REGISTER IOCTL. - AMDKFD_IOC_DBG_ADDRESS_WATCH: This IOCTL allows to set different watchpoints with various conditions as indicated by the IOCTL's arguments. The available number of watchpoints is retrieved from topology. This operation is confined to the current debugged process, which was registered through AMDKFD_IOC_DBG_REGISTER. - AMDKFD_IOC_DBG_WAVE_CONTROL: This IOCTL allows to control a wavefront as indicated by the IOCTL's arguments. For example, you can halt/resume or kill either a single wavefront or a set of wavefronts. This operation is confined to the current debugged process, which was registered through AMDKFD_IOC_DBG_REGISTER. Because the arguments for the address watch IOCTL and wave control IOCTL are dynamic, meaning that they could vary in size, the userspace passes a pointer to a structure (in userspace) that contains the value of the arguments. The kernel driver is responsible to parse this structure and validate its contents. v2: change void* to uint64_t inside ioctl arguments Signed-off-by:
-
Yair Shachar authored
This patch adds new interface functions to the kfd2kgd interface file. The new functions allow to perform H/W debugger operations by writing to GPU registers. Signed-off-by:
-
Joe Perches authored
Use the generic mechanism to declare a bitmap instead of unsigned long. It seems that "struct kfd_process.allocated_queue_bitmap" is unused. Maybe it could be deleted instead. Signed-off-by:
Joe Perches <joe@perches.com> Signed-off-by:
-
- 02 Jun, 2015 2 commits
-
-
Dave Airlie authored
Merge tag 'drm-intel-next-fixes-2015-05-29' of git://anongit.freedesktop.org/drm-intel into drm-next Fixes for 4.2. Nothing too serious (given that it's still pre merge window). With that it's off for 2 weeks of vacation for me and taking care of 4.2 fixes for Jani. * tag 'drm-intel-next-fixes-2015-05-29' of git://anongit.freedesktop.org/drm-intel: drm/i915: limit PPGTT size to 2GB in 32-bit platforms drm/i915: Another fbdev hack to avoid PSR on fbcon. drm/i915: Return the frontbuffer flip to enable intel_crtc_enable_planes. drm/i915: disable IPS while getting the sink CRCs drm/i915: Disable 12bpc hdmi for now drm/i915: Adjust sideband locking a bit for CHV/VLV drm/i915: s/dpio_lock/sb_lock/ drm/i915: Kill intel_flush_primary_plane() drm/i915: Throw out WIP CHV power well definitions drm/i915: Use the default 600ns LDO programming sequence delay drm/i915: Remove unnecessary null check in execlists_context_unqueue drm/i915: Use spinlocks for checking when to waitboost drm/i915: Fix the confusing comment about the ioctl limits Revert "drm/i915: Force clean compilation with -Werror"
-
Alexandre Courbot authored
dma_alloc_coherent() can return memory in the vmalloc range. virt_to_page() cannot handle such addresses and crashes. This patch detects such cases and obtains the struct page * using vmalloc_to_page() instead. Signed-off-by:
Alexandre Courbot <acourbot@nvidia.com> Acked-by:
Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by:
Dave Airlie <airlied@redhat.com>
-
- 29 May, 2015 3 commits
-
-
Michel Thierry authored
We already set this limit for the GGTT. This is a temporary patch until a full replacement of size_t variables (inadequate in 32-bit kernel) is in place. Regression from: commit a4e0bedc Author: Michel Thierry <michel.thierry@intel.com> Date: Wed Apr 8 12:13:35 2015 +0100 drm/i915: Use complete address space in true PPGTT v2: Prettify code and explain why this is needed. (Chris) v3: Don't hide the compilation warning in 32-bit. (Chris) Suggested-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Mika Kuoppala <mika.kuoppala@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
Michel Thierry <michel.thierry@intel.com> Signed-off-by:
-
Rodrigo Vivi authored
With unified modeset and flip paths introduced recently when switching to fbcon PSR was being disabled on fb_set_par path but re-enabled on fb_pan_display one, causing missed screen updates and un unusable console. Regression introduced with: commit bb546623 Author: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com> Date: Tue Apr 21 17:13:13 2015 +0300 drm/i915: Unify modeset and flip paths of intel_crtc_set_config() Cc: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com> Signed-off-by:
Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by:
-
Rodrigo Vivi authored
Without this frontbuffer flip when enabling planes PSR got compromised and wasn't being enabled waiting forever on the flush that never arrived. Another solution would to create a enable_cursor function and split this frontbuffer flip among the different plane enable and disable functions. But if necessary this can be done in a follow up work. For now let's just fix the regression. It was removed by: commit 87d4300a Author: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Date: Tue Apr 21 17:12:54 2015 +0300 drm/i915: Move intel_(pre_disable/post_enable)_primary to intel_display.c, and use it there. Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by:
-
- 28 May, 2015 15 commits
-
-
git://ftp.arm.linux.org.uk/~rmk/linux-armDave Airlie authored
warning fix for tda998x * 'drm-tda998x-devel' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: drm/i2c: tda998x: fix compiler warning for ssize_t
-
Russell King authored
The drm_mm debugfs output is difficult to read as two different formats are used for the addresses: 0x00000080000000-0x0000008000b000: 45056: used 0x8000b000-0x80016000: 45056: free 0x00000080016000-0x0000008001b000: 20480: used 0x8001b000-0x817a1000: 24666112: free 0x000000817a1000-0x000000817a8000: 28672: used 0x000000817a8000-0x00000081ba8000: 4194304: used Fix this by using %#018llx for all addresses, thus making the output: 0x0000000080000000-0x000000008000b000: 45056: used 0x000000008000b000-0x0000000080016000: 45056: free 0x0000000080016000-0x000000008001b000: 20480: used 0x000000008001b000-0x00000000817a1000: 24666112: free 0x00000000817a1000-0x00000000817a8000: 28672: used 0x00000000817a8000-0x0000000081ba8000: 4194304: used Signed-off-by:
Russell King <rmk+kernel@arm.linux.org.uk> Reviewed-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
git://anongit.freedesktop.org/drm-intelDave Airlie authored
- cpt modeset sequence fixes from Ville - more rps boosting tuning from Chris - S3 support for skl (Damien) - a pile of w/a for bxt from various people - cleanup of primary plane pixel formats (Damien) - a big pile of small patches with fixes and cleanups all over * tag 'drm-intel-next-2015-05-22' of git://anongit.freedesktop.org/drm-intel: (90 commits) drm/i915: Update DRIVER_DATE to 20150522 drm/i915: Introduce DRM_I915_THROTTLE_JIFFIES drm/i915: Use the correct destructor for freeing requests on error drm/i915/skl: don't fail colorkey + scaler request drm/i915: Enable GTT caching on gen8 drm/i915: Move WaProgramL3SqcReg1Default:bdw to init_clock_gating() drm/i915: Use ilk_init_lp_watermarks() on BDW drm/i915: Disable FDI RX/TX before the ports drm/i915: Disable CRT port after pipe on PCH platforms drm/i915: Disable SDVO port after the pipe on PCH platforms drm/i915: Disable HDMI port after the pipe on PCH platforms drm/i915: Fix the IBX transcoder B workarounds drm/i915: Write the SDVO reg twice on IBX drm/i915: Fix DP enhanced framing for CPT drm/i915: Clean up the CPT DP .get_hw_state() port readout drm/i915: Clarfify the DP code platform checks drm/i915: Remove the double register write from intel_disable_hdmi() drm/i915: Remove a bogus 12bpc "toggle" from intel_disable_hdmi() drm/i915/skl: Deinit/init the display at suspend/resume drm/i915: Free RPS boosts for all laggards ...
-
git://people.freedesktop.org/~agd5f/linuxDave Airlie authored
for amdgpu separately next week. Highlights for radeon: - VCE1 support - Bug fixes and misc cleanups * 'drm-next-4.2' of git://people.freedesktop.org/~agd5f/linux: radeon: Deinline indirect register accessor functions drm/radeon: Fix max_vblank_count value for current display engines drm/radeon: stop using addr to check for BO move drm/radeon: clean up radeon_audio_enable drm/radeon: take the mode_config mutex when dealing with hpds (v2) drm/radeon: make dpcd parameters const drm/radeon: Use DECLARE_BITMAP drm/radeon/tn/si: enable/disable vce cg when encoding v2 drm/radeon: add support for vce 1.0 clock gating drm/radeon: add VCE 1.0 support v4 drm/radeon/dpm: add vce support for SI drm/radeon/dpm: add vce dpm support for TN drm/radeon: implement tn_set_vce_clocks drm/radeon: implement si_set_vce_clocks v2 drm/radeon: allow some more VCE firmware versions drm/radeon: rework VCE FW size calculation drm/radeon: add a GPU reset counter queryable by userspace
-
Denys Vlasenko authored
This patch deinlines indirect register accessor functions. These functions perform two mmio accesses, framed by spin lock/unlock. Spin lock/unlock by itself takes more than 50 cycles in ideal case (if lock is exclusively cached on current CPU). With this .config: http://busybox.net/~vda/kernel_config, after uninlining these functions have sizes and callsite counts as follows: r600_uvd_ctx_rreg: 111 bytes, 4 callsites r600_uvd_ctx_wreg: 113 bytes, 5 callsites eg_pif_phy0_rreg: 106 bytes, 13 callsites eg_pif_phy0_wreg: 108 bytes, 13 callsites eg_pif_phy1_rreg: 107 bytes, 13 callsites eg_pif_phy1_wreg: 108 bytes, 13 callsites rv370_pcie_rreg: 111 bytes, 21 callsites rv370_pcie_wreg: 113 bytes, 24 callsites r600_rcu_rreg: 111 bytes, 16 callsites r600_rcu_wreg: 113 bytes, 25 callsites cik_didt_rreg: 106 bytes, 10 callsites cik_didt_wreg: 107 bytes, 10 callsites tn_smc_rreg: 106 bytes, 126 callsites tn_smc_wreg: 107 bytes, 116 callsites eg_cg_rreg: 107 bytes, 20 callsites eg_cg_wreg: 108 bytes, 52 callsites Functions r100_mm_rreg() and r100_mm_rreg() have a fast path and a locked (slow) path. This patch deinlines only slow path. r100_mm_rreg_slow: 78 bytes, 2083 callsites r100_mm_wreg_slow: 81 bytes, 3570 callsites Reduction in code size is more than 65,000 bytes: text data bss dec hex filename 85740176 22294680 20627456 128662312 7ab3b28 vmlinux.before 85674192 22294776 20627456 128598664 7aa4288 vmlinux Signed-off-by:
Denys Vlasenko <dvlasenk@redhat.com> Cc: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: linux-kernel@vger.kernel.org Signed-off-by:
-
Paulo Zanoni authored
This commit is the "sink CRC" version of: commit 8c740dce Author: Paulo Zanoni <paulo.r.zanoni@intel.com> Date: Fri Oct 17 18:42:03 2014 -0300 drm/i915: disable IPS while getting the pipe CRCs. For some unknown reason, when IPS gets enabled, the sink CRC changes. Since hsw_enable_ips() doesn't really guarantee to enable IPS (it depends on package C-states), we can't really predict if IPS is enabled or disabled while running our CRC tests, so let's just completely disable IPS while sink CRCs are being used. If we find a way to make IPS not change the pipe CRC result, we may want to fix IPS and then revert this patch (and 8c740dce too). While this doesn't happen, let's merge this patch, so the IGT tests relying on sink CRCs can work properly. This was discovered while developing a new IGT test, which will probably be called kms_frontbuffer_tracking. Testcase: igt/kms_frontbuffer_tracking (not on upstream IGT yet) Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by:
Paulo Zanoni <paulo.r.zanoni@intel.com> Reviewed-by:
-
Daniel Vetter authored
It's totally broken, and since commit d328c9d7 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Fri Apr 10 16:22:37 2015 +0200 drm/i915: Select starting pipe bpp irrespective or the primary plane the kernel will try to use it even for the common rgb888 framebuffers. Ville has patches to fix it all up properly, but unfortunately they're stuck in review limbo. And since the 4.2 feature cutoff has passed we need to somehow handle this regression. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Paulo Zanoni <przanoni@gmail.com> Signed-off-by:
Daniel Vetter <daniel.vetter@intel.com>
-
Ville Syrjälä authored
chv_enable_pll() doesn't need to hold sb_lock for the entire duration of the function. Drop the lock as soon as possible. valleyview_set_cdclk() does a potential lock+unlock+lock+unlock cycle with sb_lock. Grab the lock a few lines earlier so we can make do with a single lock+unlock cycle always. Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
Jani Nikula <jani.nikula@intel.com> Signed-off-by:
-
Ville Syrjälä authored
Rename dpio_lock to sb_lock to inform the reader that its primary purpose is to protect the sideband mailbox rather than some DPIO state. Signed-off-by:
-
Ville Syrjälä authored
The primary plane frobbing was removed from the sprite code in commit ecce87ea Author: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Date: Tue Apr 21 17:12:50 2015 +0300 drm/i915: Remove implicitly disabling primary plane for now but the intel_flush_primary_plane() calls were left behind. Replace them with straight forward POSTING_READ() of the sprite surface address register. The other user of intel_flush_primary_plane() is g4x_disable_trickle_feed() where we can just inline the steps directly. This allows intel_flush_primary_plane() to be killed off. Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by:
-
Ville Syrjälä authored
Expecting CHV power wells to be just an extended versions of the VLV power wells, a bunch of commented out power wells were added in anticipation when Punit folks would implement it all. Turns out they never did, and instead CHV has fewer power wells than VLV. Rip out all the #if 0'ed junk that's not needed. v2: Rename the "pipe-a" well to "display" to match VLV Clarify the pipe A power well relationship to pipes B and C (Deepak) Reviewed-by:Deepak S <deepak.s@linux.intel.com> Signed-off-by:
-
Ville Syrjälä authored
Not sure which LDO programming sequence delay should be used for the CHV PHY, but the spec says that 600ns is "Used by default for initial bringup", and the BIOS seems to use that, so let's do the same. Reviewed-by:
-
Michel Dänzer authored
The value was much too low, which could cause the userspace visible vblank counter to move backwards when the hardware counter wrapped around. Reviewed-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
Michel Dänzer <michel.daenzer@amd.com> Signed-off-by:
-
Christian König authored
It is theoretically possible that a swapped out BO gets the same GTT address, but different backing pages while being swapped in. Instead just use another VA state to note updated areas. Signed-off-by:
-
Alex Deucher authored
- make it static - fix mask/bool handling for last param Signed-off-by:
-
- 27 May, 2015 1 commit
-
-
Michel Thierry authored
commit 53292cdb ("drm/i915: Workaround to avoid lite restore with HEAD==TAIL") added a check for req0 != null which is unnecessary. The only way req0 could be null is if the list was empty, and this is already addressed at the beginning of execlists_context_unqueue(). Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
- 26 May, 2015 15 commits
-
-
Chris Wilson authored
In commit 1854d5ca Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Tue Apr 7 16:20:32 2015 +0100 drm/i915: Deminish contribution of wait-boosting from clients we removed an atomic timer based check for allowing waitboosting and moved it below the mutex taken during RPS. However, that mutex can be held for long periods of time on Vallyview/Cherryview as communication with the PCU is slow. As clients may frequently wait for results (e.g. such as tranform feedback) we introduced contention between the client and the RPS worker. We can take advantage of the RPS worker, by switching the wait boost decision to use spin locks and defer the actual reclocking to the worker. Fixes a regression of up to 45% on Baytrail and Baswell! v2 (Daniel): - Use max_freq_softlimit instead of the not-yet-merged boost frequency. - Don't inject a fake irq into the boost work, instead treat client_boost as just another legit waker. v3: Drop the now unused mask (Chris). Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=90112 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> (v1) Signed-off-by:
-
Damien Lespiau authored
It was reported that this comment was confusing, and indeed it is. v2: (one year later!) Add the range for the DRM_I915_* iotcl defines (Daniel) Signed-off-by:Damien Lespiau <damien.lespiau@intel.com> Signed-off-by:
-
Alex Deucher authored
Since we are messing with state in the worker. v2: drop the changes in the mst worker Signed-off-by: -
Alex Deucher authored
Signed-off-by: -
Joe Perches authored
Use the generic mechanism to declare a bitmap instead of unsigned long. Signed-off-by:
-
Alex Deucher authored
Some of the vce clocks are automatic, others need to be manually enabled. For ease, just disable cg when vce is active. v2: rebased, call vce_v1_0_enable_mgcg directly Signed-off-by:
-
Alex Deucher authored
Signed-off-by: -
Christian König authored
Initial support for VCE 1.0 using newest firmware. v2: rebased v3: fix for TN v4: fix FW size calculation Signed-off-by:
-
Alex Deucher authored
Signed-off-by: -
Alex Deucher authored
Signed-off-by: -
Alex Deucher authored
This implements the function to set the vce clocks on TN hardware. Signed-off-by: -
Christian König authored
For setting clocks with VCE v1.0 v2: (chk) rebased on current tree Signed-off-by:
-
Christian König authored
They seem to work fine with the kernel interface. Signed-off-by:
-
Christian König authored
Previously we were completely over allocating, fix this by actually implementing the size calculation. Signed-off-by:
-
Marek Olšák authored
Userspace will be able to tell whether a GPU reset occured by comparing an old referece value of the counter with a new value. Reviewed-by:
Marek Olšák <marek.olsak@amd.com> Signed-off-by:
-
