- 30 Oct, 2017 29 commits
-
-
Josef Bacik authored
Nikolay reported that generic/273 was failing currently with ENOSPC. Turns out this is because we get to the point where the outstanding reservations are greater than the pinned space on the fs. This is a mistake, previously we used the current reservation amount in may_commit_transaction, not the entire outstanding reservation amount. Fix this to find the minimum byte size needed to make progress in flushing, and pass that into may_commit_transaction. From there we can make a smarter decision on whether to commit the transaction or not. This fixes the failure in generic/273. From Nikolai, IOW: when we go to the final stage of deciding whether to do trans commit, instead of passing all the reservations from all tickets we just pass the reservation for the current ticket. Otherwise, in case all reservations exceed pinned space, then we don't commit transaction and fail prematurely. Before we passed num_bytes from flush_space, where num_bytes was the sum of all pending reserverations, but now all we do is take the first ticket and commit the trans if we can satisfy that. Fixes: 957780eb ("Btrfs: introduce ticketed enospc infrastructure") Cc: stable@vger.kernel.org # 4.8 Reported-by:
Nikolay Borisov <nborisov@suse.com> Signed-off-by:
Josef Bacik <jbacik@fb.com> Reviewed-by:
David Sterba <dsterba@suse.com>
-
Kuanling Huang authored
By analyzing the perf on btrfs send, we found it take large amount of cpu time on page_cache_sync_readahead. This effort can be reduced after switching to asynchronous one. Overall performance gain on HDD and SSD were 9 and 15 percent if simply send a large file. Signed-off-by:
Kuanling Huang <peterh@synology.com> Reviewed-by:
-
Liu Bo authored
The local bio_list may have pending bios when doing cleanup, it can end up with memory leak if they don't get freed. Signed-off-by:
Liu Bo <bo.li.liu@oracle.com> Reviewed-by:
-
Colin Ian King authored
Don't populate the read-only array types on the stack, instead make it static const. Makes the object code smaller by nearly 60 bytes: Before: text data bss dec hex filename 90536 6552 64 97152 17b80 fs/btrfs/ioctl.o After: text data bss dec hex filename 90414 6616 64 97094 17b46 fs/btrfs/ioctl.o Signed-off-by:
Colin Ian King <colin.king@canonical.com> Reviewed-by:
-
Allen Pais authored
Forward the correct return value -ENOMEM from btrfsic_dev_state_alloc() too. Signed-off-by:
Allen Pais <allen.lkml@gmail.com> Reviewed-by:
Anand Jain <anand.jain@oracle.com> Reviewed-by:
-
Liu Bo authored
We've seen the following backtrace stack in ftrace or dmesg log, kworker/u16:10-4244 [000] 241942.480955: function: btrfs_put_ordered_extent kworker/u16:10-4244 [000] 241942.480956: kernel_stack: <stack trace> => finish_ordered_fn (ffffffffa0384475) => btrfs_scrubparity_helper (ffffffffa03ca577) <-----"incorrect" => btrfs_freespace_write_helper (ffffffffa03ca98e) <-----"correct" => process_one_work (ffffffff81117b2f) => worker_thread (ffffffff81118c2a) => kthread (ffffffff81121de0) => ret_from_fork (ffffffff81d7087a) btrfs_freespace_write_helper is actually calling normal_worker_helper instead of btrfs_scrubparity_helper, so somehow kernel has parsed the incorrect function address while unwinding the stack, btrfs_scrubparity_helper really shouldn't be shown up. It's caused by compiler doing inline for our helper function, adding a noinline tag can fix that. Signed-off-by:
-
Liu Bo authored
Since both committing transaction and writing log-tree are doing plugging on metadata IO, we can unify to use %sync_writers to benefit both cases, instead of checking bio_flags while writing meta blocks of log-tree. We can remove this bio_flags because in order to write dirty blocks, log tree also uses btrfs_write_marked_extents(), inside which we have enabled %sync_writers, therefore, every write goes in a synchronous way, so does checksuming. Please also note that, bio_flags is applied per-context while %sync_writers is applied per-inode, so this might incur some overhead, ie. 1) while log tree is flushing its dirty blocks via btrfs_write_marked_extents(), in which %sync_writers is increased by one. 2) in the meantime, some writeback operations may happen upon btrfs's metadata inode, so these writes go synchronously, too. However, AFAICS, the overhead is not a big one while the win is that we unify the two places that needs synchronous way and remove a special hack/flag. This removes the bio_flags related stuff for writing log-tree. Signed-off-by:
-
Liu Bo authored
We have started plug in btrfs_write_and_wait_marked_extents() but the generated IOs actually go to device's schedule IO list where the work is doing in another task, thus the started plug doesn't make any sense. And since we wait for IOs immediately after writing meta blocks, it's the same case as writing log tree, doing sync submit can merge more IOs. Signed-off-by:
-
Satoru Takeuchi authored
Signed-off-by:
Satoru Takeuchi <satoru.takeuchi@gmail.com> Reviewed-by:
-
Colin Ian King authored
There are checks on fs_info in __btrfs_panic to avoid dereferencing a null fs_info, however, there is a call to btrfs_crit that may also dereference a null fs_info. Fix this by adding a check to see if fs_info is null and only print the s_id if fs_info is non-null. Detected by CoverityScan CID#401973 ("Dereference after null check") Fixes: efe120a0 ("Btrfs: convert printk to btrfs_ and fix BTRFS prefix") Signed-off-by: -
Christos Gkekas authored
The value of variable 'can_recover' is never used after being set, thus it should be removed, as it was never used since the first commit 68a7342c ("Btrfs: cleanup orphaned root orphan item"). Signed-off-by:
Christos Gkekas <chris.gekas@gmail.com> Reviewed-by:
-
Christophe JAILLET authored
If 'btrfs_alloc_path()' fails, we must free the resources already allocated, as done in the other error handling paths in this function. Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by:
Qu Wenruo <quwenruo.btrfs@gmx.com> Signed-off-by:
-
Nikolay Borisov authored
__link_block_group is called from only 2 places and at each call site the space_info being passed is the same as the space info assigned to the passed cache struct. Let's remove the redundant argument and make the function reference the space_info from the passed block_group_cache. No functional changes Signed-off-by:
-
Nikolay Borisov authored
Currently the code executes add_extent_mapping and if it is successful it links the new mapping, it then proceeds to unlock the extent mapping tree and check for failure and handle them. Instead, rework the code to only perform a single check if add_extent_mapping has failed and handle it, otherwise the code continues in a linear fashion. No functional changes Signed-off-by:
-
Nikolay Borisov authored
Introduced by 5a5f79b5 ("Btrfs: allow unaligned DIO") and never used. The buffered fallback from unaligned DIO works as expected. Signed-off-by:
Timofey Titovets <nefelim4ag@gmail.com> Reviewed-by:
-
Nikolay Borisov authored
btrfs_changed_cb_t represents the signature of the callback being passed to btrfs_compare_trees. Currently there is only one such callback, namely changed_cb in send.c. This function doesn't really uses the first 2 parameters, i.e. the roots. Since there are not other functions implementing the btrfs_changed_cb_t let's remove the unused parameters from the prototype and implementation. Signed-off-by:
-
Nikolay Borisov authored
iterate_dir_item:found_key - introduced in 31db9f7c ("Btrfs: introduce BTRFS_IOC_SEND for btrfs send/receive"), yet never used. record_ref:num - ditto This is a first pass with the low-hanging fruit. There are still quite a few unsued parameters in some function which have to abide by a callback interface. Signed-off-by:
-
Nikolay Borisov authored
Src was initially part of 31ff1cd2 ("Btrfs: Copy into the log tree in big batches"), however 16e7549f ("Btrfs: incompatible format change to remove hole extents") changed parameters passed to copy_items which made the src variable redundant. Signed-off-by:
-
Liu Bo authored
While we submit direct writes, if the inode is flagged with nodatasum, there's no benefit to submit asynchronously, because a) we don't have to calculate checksum across processors, b) and direct IO has started a plug, but async submit makes us queue IO on each device's scheduled IO list instead of DIO's plug list, so that IOs get much less merges in general. Lets use sync submit for nodatasum inodes. Signed-off-by:
-
Liu Bo authored
After mapping block with BTRFS_MAP_WRITE, parities have been sorted to the end position, so this search can start from the first parity stripe. Signed-off-by:
-
Anand Jain authored
We didn't copy fsid to struct super_block.s_uuid so Overlay disables index feature with btrfs as the lower FS. kernel: overlayfs: fs on '/lower' does not support file handles, falling back to index=off. Fix this by publishing the fsid through struct super_block.s_uuid. [ dsterba: I think that setting s_uuid is the last missing bit. Overlay needs the file handle encoding support from the lower filesystem, which is supported. Filling the whole filesystem id is correct, the subvolume id is encoded in the file handle buffer from inside btrfs_encode_fh. ] Signed-off-by:
-
Omar Sandoval authored
Signed-off-by:
Omar Sandoval <osandov@fb.com> Reviewed-by:
-
Omar Sandoval authored
These aren't used outside of volumes.c. Signed-off-by:
-
Anand Jain authored
So that perf can show the state symbol. Signed-off-by:
-
Nikolay Borisov authored
Some static functions are needlessly forward declared. Let's remove those declarations since they add no value. Signed-off-by:
-
Liu Bo authored
Both wait_for_commit() and wait_for_writer() are checking the condition out of the mutex lock. This refactors code a bit to be lock safe. Signed-off-by:
-
Liu Bo authored
Since TASK_UNINTERRUPTIBLE has been used here, wait_event() can do the same job. Signed-off-by:
-
Liu Bo authored
If we're still going to wait after schedule(), we don't have to do finish_wait() to remove our %wait_queue_entry since prepare_to_wait() won't add the same %wait_queue_entry twice. Signed-off-by:
-
Liu Bo authored
Block layer has a limit on plug, ie. BLK_MAX_REQUEST_COUNT == 16, so we don't gain benefits by batching 64 bios here. Signed-off-by:
-
- 29 Oct, 2017 11 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) Fix route leak in xfrm_bundle_create(). 2) In mac80211, validate user rate mask before configuring it. From Johannes Berg. 3) Properly enforce memory limits in fair queueing code, from Toke Hoiland-Jorgensen. 4) Fix lockdep splat in inet_csk_route_req(), from Eric Dumazet. 5) Fix TSO header allocation and management in mvpp2 driver, from Yan Markman. 6) Don't take socket lock in BH handler in strparser code, from Tom Herbert. 7) Don't show sockets from other namespaces in AF_UNIX code, from Andrei Vagin. 8) Fix double free in error path of tap_open(), from Girish Moodalbail. 9) Fix TX map failure path in igb and ixgbe, from Jean-Philippe Brucker and Alexander Duyck. 10) Fix DCB mode programming in stmmac driver, from Jose Abreu. 11) Fix err_count handling in various tunnels (ipip, ip6_gre). From Xin Long. 12) Properly align SKB head before building SKB in tuntap, from Jason Wang. 13) Avoid matching qdiscs with a zero handle during lookups, from Cong Wang. 14) Fix various endianness bugs in sctp, from Xin Long. 15) Fix tc filter callback races and add selftests which trigger the problem, from Cong Wang. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (73 commits) selftests: Introduce a new test case to tc testsuite selftests: Introduce a new script to generate tc batch file net_sched: fix call_rcu() race on act_sample module removal net_sched: add rtnl assertion to tcf_exts_destroy() net_sched: use tcf_queue_work() in tcindex filter net_sched: use tcf_queue_work() in rsvp filter net_sched: use tcf_queue_work() in route filter net_sched: use tcf_queue_work() in u32 filter net_sched: use tcf_queue_work() in matchall filter net_sched: use tcf_queue_work() in fw filter net_sched: use tcf_queue_work() in flower filter net_sched: use tcf_queue_work() in flow filter net_sched: use tcf_queue_work() in cgroup filter net_sched: use tcf_queue_work() in bpf filter net_sched: use tcf_queue_work() in basic filter net_sched: introduce a workqueue for RCU callbacks of tc filter sctp: fix some type cast warnings introduced since very beginning sctp: fix a type cast warnings that causes a_rwnd gets the wrong value sctp: fix some type cast warnings introduced by transport rhashtable sctp: fix some type cast warnings introduced by stream reconf ... -
David S. Miller authored
Cong Wang says: ==================== net_sched: fix races with RCU callbacks Recently, the RCU callbacks used in TC filters and TC actions keep drawing my attention, they introduce at least 4 race condition bugs: 1. A simple one fixed by Daniel: commit c78e1746 Author: Daniel Borkmann <daniel@iogearbox.net> Date: Wed May 20 17:13:33 2015 +0200 net: sched: fix call_rcu() race on classifier module unloads 2. A very nasty one fixed by me: commit 1697c4bb Author: Cong Wang <xiyou.wangcong@gmail.com> Date: Mon Sep 11 16:33:32 2017 -0700 net_sched: carefully handle tcf_block_put() 3. Two more bugs found by Chris: https://patchwork.ozlabs.org/patch/826696/ https://patchwork.ozlabs.org/patch/826695/ Usually RCU callbacks are simple, however for TC filters and actions, they are complex because at least TC actions could be destroyed together with the TC filter in one callback. And RCU callbacks are invoked in BH context, without locking they are parallel too. All of these contribute to the cause of these nasty bugs. Alternatively, we could also: a) Introduce a spinlock to serialize these RCU callbacks. But as I said in commit 1697c4bb ("net_sched: carefully handle tcf_block_put()"), it is very hard to do because of tcf_chain_dump(). Potentially we need to do a lot of work to make it possible (if not impossible). b) Just get rid of these RCU callbacks, because they are not necessary at all, callers of these call_rcu() are all on slow paths and holding RTNL lock, so blocking is allowed in their contexts. However, David and Eric dislike adding synchronize_rcu() here. As suggested by Paul, we could defer the work to a workqueue and gain the permission of holding RTNL again without any performance impact, however, in tcf_block_put() we could have a deadlock when flushing workqueue while hodling RTNL lock, the trick here is to defer the work itself in workqueue and make it queued after all other works so that we keep the same ordering to avoid any use-after-free. Please see the first patch for details. Patch 1 introduces the infrastructure, patch 2~12 move each tc filter to the new tc filter workqueue, patch 13 adds an assertion to catch potential bugs like this, patch 14 closes another rcu callback race, patch 15 and patch 16 add new test cases. ==================== Reported-by:
Chris Mi <chrism@mellanox.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Jiri Pirko <jiri@resnulli.us> Cc: John Fastabend <john.fastabend@gmail.com> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Signed-off-by:
Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Chris Mi authored
In this patchset, we fixed a tc bug. This patch adds the test case that reproduces the bug. To run this test case, user should specify an existing NIC device: # sudo ./tdc.py -d enp4s0f0 This test case belongs to category "flower". If user doesn't specify a NIC device, the test cases belong to "flower" will not be run. In this test case, we create 1M filters and all filters share the same action. When destroying all filters, kernel should not panic. It takes about 18s to run it. Acked-by:
Jamal Hadi Salim <jhs@mojatatu.com> Acked-by:
Lucas Bates <lucasb@mojatatu.com> Signed-off-by:
-
Chris Mi authored
# ./tdc_batch.py -h usage: tdc_batch.py [-h] [-n NUMBER] [-o] [-s] [-p] device file TC batch file generator positional arguments: device device name file batch file name optional arguments: -h, --help show this help message and exit -n NUMBER, --number NUMBER how many lines in batch file -o, --skip_sw skip_sw (offload), by default skip_hw -s, --share_action all filters share the same action -p, --prio all filters have different prio Acked-by: -
Cong Wang authored
Similar to commit c78e1746 ("net: sched: fix call_rcu() race on classifier module unloads"), we need to wait for flying RCU callback tcf_sample_cleanup_rcu(). Cc: Yotam Gigi <yotamg@mellanox.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Jiri Pirko <jiri@resnulli.us> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Signed-off-by:
-
Cong Wang authored
After previous patches, it is now safe to claim that tcf_exts_destroy() is always called with RTNL lock. Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Jiri Pirko <jiri@resnulli.us> Cc: John Fastabend <john.fastabend@gmail.com> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Signed-off-by:
-
Cong Wang authored
Defer the tcf_exts_destroy() in RCU callback to tc filter workqueue and get RTNL lock. Reported-by:
-
Cong Wang authored
Defer the tcf_exts_destroy() in RCU callback to tc filter workqueue and get RTNL lock. Reported-by:
-
Cong Wang authored
Defer the tcf_exts_destroy() in RCU callback to tc filter workqueue and get RTNL lock. Reported-by:
-
Cong Wang authored
Defer the tcf_exts_destroy() in RCU callback to tc filter workqueue and get RTNL lock. Reported-by:
-
