- 08 Jul, 2008 40 commits
-
-
Yinghai Lu authored
kva ram already mapped right after away, so don't need to get that for low ram. avoid wasting one copy of pgdat. also add node id in early_res name in case we get it from find_e820_area. Signed-off-by:
Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by:
Ingo Molnar <mingo@elte.hu>
-
Yinghai Lu authored
Ying Huang would like setup_data to be reserved, but not included in the no save range. Here we try to modify the e820 table to reserve that range early. also add that in early_res in case bootloader messes up with the ramdisk. other solution would be 1. add early_res_to_highmem... 2. early_res_to_e820... but they could reserve another type memory wrongly, if early_res has some resource reserved early, and not needed later, but it is not removed from early_res in time. Like the RAMDISK (already handled). Signed-off-by:
Huang, Ying <ying.huang@intel.com> Signed-off-by:
-
Jeremy Fitzhardinge authored
Signed-off-by:
Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by:
-
Ingo Molnar authored
now that the early-ioremap code is unified, move the prototypes too from io_32.h to io.h. this fixes: arch/x86/kernel/setup.c:531: error: implicit declaration of function ‘early_ioremap_init' on 64-bit. Signed-off-by: -
Jeremy Fitzhardinge authored
Looks like the setup.c unification missed the early_ioremap init from the early_ioremap unification. Unconditionally call early_ioremap_init(). needed for "x86/paravirt: groundwork for 64-bit Xen support". Signed-off-by:
-
Ingo Molnar authored
typo fixes from Randy Dunlap and Alan Cox. Signed-off-by:
Cyrill Gorcunov <gorcunov@gmail.com> Signed-off-by:
-
Cyrill Gorcunov authored
nmi_watchdog is set to NMI_NONE by default (ie disabled) on _any_ mode so lets fix documentation too. Signed-off-by:
-
Yinghai Lu authored
change the enable_local_apic to static force_enable_local_apic for 32bit Signed-off-by:
-
Yinghai Lu authored
use PMD_SHIFT to calculate boundary also adjust size for pre-allocated table size Signed-off-by:
-
Yinghai Lu authored
when 64bit resource is not enabled, we get: arch/x86/kernel/e820.c: In function ‘e820_reserve_resources’: arch/x86/kernel/e820.c:1217: warning: comparison is always false due to limited range of data type because res->start/end is resource_t aka u32. it will overflow. fix it with temp end of u64 Signed-off-by:
-
Yinghai Lu authored
some ram-end boundary only has page alignment, instead of 2M alignment. v2: make init_memory_mapping more solid: start could be any value other than 0 v3: fix NON PAE by handling left over in kernel_physical_mapping Signed-off-by:
-
Jeremy Fitzhardinge authored
Make sure SWAPGS and PARAVIRT_ADJUST_EXCEPTION_FRAME are properly defined when CONFIG_PARAVIRT is off. Fixes Ingo's build failure: arch/x86/kernel/entry_64.S: Assembler messages: arch/x86/kernel/entry_64.S:1201: Error: invalid character '_' in mnemonic arch/x86/kernel/entry_64.S:1205: Error: invalid character '_' in mnemonic arch/x86/kernel/entry_64.S:1209: Error: invalid character '_' in mnemonic arch/x86/kernel/entry_64.S:1213: Error: invalid character '_' in mnemonic Signed-off-by:
-
Yinghai Lu authored
instead of calling it from trap_init() also move init ioapic mapping out of apic_32.c so 32 bit do same as 64 bit Signed-off-by:
-
Yinghai Lu authored
v2: fix print info to cont Signed-off-by:
-
Jeremy Fitzhardinge authored
Ingo Molnar wrote: > that fixed the build but now we've got a boot crash with this config: > > time.c: Detected 2010.304 MHz processor. > spurious 8259A interrupt: IRQ7. > BUG: unable to handle kernel NULL pointer dereference at 0000000000000000 > IP: [<0000000000000000>] > PGD 0 > Thread overran stack, or stack corrupted > Oops: 0010 [1] SMP > CPU 0 > I don't know if this will fix this bug, but it's definitely a bugfix. It was trashing random pages by overwriting them with pagetables... Don't trash a large pmd's data when mapping physical memory. This is a bugfix for "x86_64: adjust mapping of physical pagetables to work with Xen". Signed-off-by:
-
Jeremy Fitzhardinge authored
Ingo Molnar wrote: > * Jeremy Fitzhardinge <jeremy@goop.org> wrote: > > >>> It quickly broke the build in testing: > >>> include/asm/pgalloc.h: In function ‘paravirt_pgd_free': > >>> include/asm/pgalloc.h:14: error: parameter name omitted > >>> arch/x86/kernel/entry_64.S: In file included from > >>> arch/x86/kernel/traps_64.c:51:include/asm/pgalloc.h: In function > >>> ‘paravirt_pgd_free': > >>> include/asm/pgalloc.h:14: error: parameter name omitted >>> >> No, looks like my fault. The non-PARAVIRT version of >> paravirt_pgd_free() is: >> >> static inline void paravirt_pgd_free(struct mm_struct *mm, pgd_t *) {} >> >> but C doesn't like missing parameter names, even if unused. >> >> This should fix it: >> > > that fixed the build but now we've got a boot crash with this config: > > time.c: Detected 2010.304 MHz processor. > spurious 8259A interrupt: IRQ7. > BUG: unable to handle kernel NULL pointer dereference at 0000000000000000 > IP: [<0000000000000000>] > PGD 0 > Thread overran stack, or stack corrupted > Oops: 0010 [1] SMP > CPU 0 > > with: > > http://redhat.com/~mingo/misc/config-Thu_Jun_26_12_46_46_CEST_2008.bad > Use SWAPGS_UNSAFE_STACK in ia32entry.S in the places where the active stack is the usermode stack. Signed-off-by: -
Yinghai Lu authored
do that in init_memory_mapping also remove one init_ohci1394_dma_on_all_controllers Signed-off-by:
-
Yinghai Lu authored
asm-x86/paravirt.h already have protection with CONFIG_PARAVIRT inside Signed-off-by:
-
Bernhard Walle authored
This patch brings back limiting of the E820 map when a user-defined E820 map is specified. While the behaviour of i386 (32 bit) was to limit the E820 map (and /proc/iomem), the behaviour of x86-64 (64 bit) was not to limit. That patch limits the E820 map again for both x86 architectures. Code was tested for compilation and booting on a 32 bit and 64 bit system. Signed-off-by:
Bernhard Walle <bwalle@suse.de> Acked-by:
-
Jeremy Fitzhardinge authored
The patch "x86: introduce init_memory_mapping for 32bit" does not allocate enough space for PTEs if the CPU does not implement PSE. Signed-off-by:
-
Jeremy Fitzhardinge authored
Signed-off-by:
Eduardo Habkost <ehabkost@redhat.com> Signed-off-by:
-
Jeremy Fitzhardinge authored
64-bit Xen pushes a couple of extra words onto an exception frame. Add a hook to deal with them. Signed-off-by:
-
Jeremy Fitzhardinge authored
It's never safe to call a swapgs pvop when the user stack is current - it must be inline replaced. Rather than making a call, the SWAPGS_UNSAFE_STACK pvop always just puts "swapgs" as a placeholder, which must either be replaced inline or trap'n'emulated (somehow). Signed-off-by:
-
Jeremy Fitzhardinge authored
Replace privileged instructions with the corresponding pvops in ia32entry.S. Signed-off-by:
-
Jeremy Fitzhardinge authored
In a 64-bit system, we need separate sysret/sysexit operations to return to a 32-bit userspace. Signed-off-by:
Jeremy Fitzhardinge <jeremy.fitzhardinge@citirx.com> Cc: xen-devel <xen-devel@lists.xensource.com> Cc: Stephen Tweedie <sct@redhat.com> Cc: Eduardo Habkost <ehabkost@redhat.com> Cc: Mark McLoughlin <markmc@redhat.com> Signed-off-by:
-
Jeremy Fitzhardinge authored
There's no need to combine restoring the user rsp within the sysret pvop, so split it out. This makes the pvop's semantics closer to the machine instruction. Signed-off-by:
-
Jeremy Fitzhardinge authored
Don't conflate sysret and sysexit; they're different instructions with different semantics, and may be in use at the same time (at least within the same kernel, depending on whether its an Intel or AMD system). sysexit - just return to userspace, does no register restoration of any kind; must explicitly atomically enable interrupts. sysret - reloads flags from r11, so no need to explicitly enable interrupts on 64-bit, responsible for restoring usermode %gs Signed-off-by: -
Jeremy Fitzhardinge authored
This is needed when the kernel is running on RING3, such as under Xen. x86_64 has a weird feature that makes it #GP on iret when SS is a null descriptor. This need to be tested on bare metal to make sure it doesn't cause any problems. AMD specs say SS is always ignored (except on iret?). Signed-off-by:
-
Jeremy Fitzhardinge authored
We must do this because load_TLS() may need to clear %fs and %gs. (e.g. under Xen). Signed-off-by:
-
Jeremy Fitzhardinge authored
We must leave lazy mode before switching the %fs and %gs selectors. Signed-off-by:
-
Eduardo Habkost authored
We will need to set a pte on l3_user_pgt. Extract set_pte_vaddr_pud() from set_pte_vaddr(), that will accept the l3 page table as parameter. This change should be a no-op for existing code. Signed-off-by:
Mark McLoughlin <markmc@redhat.com> Signed-off-by:
-
Jeremy Fitzhardinge authored
Because Xen doesn't support PSE mappings in guests, all code which assumed the presence of PSE has been changed to fall back to smaller mappings if necessary. As a result, PSE is optional rather than required (though still used whereever possible). Signed-off-by:
-
Jeremy Fitzhardinge authored
If PSE is not available, then fall back to 4k page mappings for the vmemmap area. Signed-off-by:
-
Jeremy Fitzhardinge authored
This makes a few of changes to the construction of the initial pagetables to work better with paravirt_ops/Xen. The main areas are: 1. Support non-PSE mapping of memory, since Xen doesn't currently allow 2M pages to be mapped in guests. 2. Make sure that the ioremap alias of all pages are dropped before attaching the new page to the pagetable. This avoids having writable aliases of pagetable pages. 3. Preserve existing pagetable entries, rather than overwriting. Its possible that a fair amount of pagetable has already been constructed, so reuse what's already in place rather than ignoring and overwriting it. The algorithm relies on the invariant that any page which is part of the kernel pagetable is itself mapped in the linear memory area. This way, it can avoid using ioremap on a pagetable page. The invariant holds because it maps memory from low to high addresses, and also allocates memory from low to high. Each allocated page can map at least 2M of address space, so the mapped area will always progress much faster than the allocated area. It relies on the early boot code mapping enough pages to get started. Signed-off-by: -
Jeremy Fitzhardinge authored
Split x86_64_start_kernel() into two pieces: The first essentially cleans up after head_64.S. It clears the bss, zaps low identity mappings, sets up some early exception handlers. The second part preserves the boot data, reserves the kernel's text/data/bss, pagetables and ramdisk, and then starts the kernel proper. This split is so that Xen can call the second part to do the set up it needs done. It doesn't need any of the first part setups, because it doesn't boot via head_64.S, and its redundant or actively damaging. Signed-off-by:
-
Jeremy Fitzhardinge authored
This matches 32 bit. Signed-off-by:
-
Eduardo Habkost authored
Set __PAGE_OFFSET to the most negative possible address + 16*PGDIR_SIZE. The gap is to allow a space for a hypervisor to fit. The gap is more or less arbitrary, but it's what Xen needs. When booting native, kernel/head_64.S has a set of compile-time generated pagetables used at boot time. This patch removes their absolutely hard-coded layout, and makes it parameterised on __PAGE_OFFSET (and __START_KERNEL_map). Signed-off-by:
-
Jeremy Fitzhardinge authored
On 32-bit it's best to use a %cs: prefix to access memory where the other segments may not bet set up properly yet. On 64-bit it's best to use a rip-relative addressing mode. Define PARA_INDIRECT() to abstract this and generate the proper addressing mode in each case. Signed-off-by:
-
Jeremy Fitzhardinge authored
Rather than just jumping to 0 when there's a missing operation, raise a BUG. Signed-off-by:
-
Jeremy Fitzhardinge authored
Jan Beulich points out that vmalloc_sync_all() assumes that the kernel's pmd is always expected to be present in the pgd. The current pgd construction code will add the pgd to the pgd_list before its pmds have been pre-populated, thereby making it visible to vmalloc_sync_all(). However, because pgd_prepopulate_pmd also does the allocation, it may block and cannot be done under spinlock. The solution is to preallocate the pmds out of the spinlock, then populate them while holding the pgd_list lock. This patch also pulls the pmd preallocation and mop-up functions out to be common, assuming that the compiler will generate no code for them when PREALLOCTED_PMDS is 0. Also, there's no need for pgd_ctor to clear the pgd again, since it's allocated as a zeroed page. Signed-off-by:
-
