- 09 Jan, 2019 40 commits
-
-
Dmitry Eremin-Solenikov authored
commit fa460073 upstream. crypto_cfb_decrypt_segment() incorrectly XOR'ed generated keystream with IV, rather than with data stream, resulting in incorrect decryption. Test vectors will be added in the next patch. Signed-off-by:
Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Cc: stable@vger.kernel.org Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Dmitry Eremin-Solenikov authored
commit 7da66670 upstream. Add AES128/192/256-CFB testvectors from NIST SP800-38A. Signed-off-by:
-
Atul Gupta authored
commit c35828ea upstream. Immediate packets sent to hardware should include the work request length in calculating the flits. WR occupy one flit and if not accounted result in invalid request which stalls the HW queue. Cc: stable@vger.kernel.org Signed-off-by:
Atul Gupta <atul.gupta@chelsio.com> Signed-off-by:
-
Wenwen Wang authored
commit 7172122b upstream. In crypto_alloc_context(), a DMA pool is allocated through dma_pool_alloc() to hold the crypto context. The meta data of the DMA pool, including the pool used for the allocation 'ndev->ctx_pool' and the base address of the DMA pool used by the device 'dma', are then stored to the beginning of the pool. These meta data are eventually used in crypto_free_context() to free the DMA pool through dma_pool_free(). However, given that the DMA pool can also be accessed by the device, a malicious device can modify these meta data, especially when the device is controlled to deploy an attack. This can cause an unexpected DMA pool free failure. To avoid the above issue, this patch introduces a new structure crypto_ctx_hdr and a new field chdr in the structure nitrox_crypto_ctx hold the meta data information of the DMA pool after the allocation. Note that the original structure ctx_hdr is not changed to ensure the compatibility. Cc: <stable@vger.kernel.org> Signed-off-by:
Wenwen Wang <wang6495@umn.edu> Signed-off-by:
-
Jernej Skrabec authored
commit 65b66576 upstream. Allwinner H6 SoC has multiplier N range between 1 and 254. Since parent rate is 24MHz, intermediate result when calculating final rate easily overflows 32 bit variable. Because of that, introduce function for calculating clock rate which uses 64 bit variable for intermediate result. Fixes: 6174a1e2 ("clk: sunxi-ng: Add N-M-factor clock support") Fixes: ee28648c ("clk: sunxi-ng: Remove the use of rational computations") CC: <stable@vger.kernel.org> Signed-off-by:
Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by:
Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by:
-
Johan Jonker authored
commit 8b19faf6 upstream. Fix typo in common_clk_branches. Make spdif_pre parent of spdif_frac. Fixes: 66746420 ("clk: rockchip: include downstream muxes into fractional dividers") Cc: stable@vger.kernel.org Signed-off-by:
Johan Jonker <jbx9999@hotmail.com> Acked-by:
Elaine Zhang <zhangqing@rock-chips.com> Signed-off-by:
Heiko Stuebner <heiko@sntech.de> Signed-off-by:
-
Lukas Wunner authored
commit 56c17234 upstream. The IRQ handler bcm2835_spi_interrupt() first reads as much as possible from the RX FIFO, then writes as much as possible to the TX FIFO. Afterwards it decides whether the transfer is finished by checking if the TX FIFO is empty. If very few bytes were written to the TX FIFO, they may already have been transmitted by the time the FIFO's emptiness is checked. As a result, the transfer will be declared finished and the chip will be reset without reading the corresponding received bytes from the RX FIFO. The odds of this happening increase with a high clock frequency (such that the TX FIFO drains quickly) and either passing "threadirqs" on the command line or enabling CONFIG_PREEMPT_RT_BASE (such that the IRQ handler may be preempted between filling the TX FIFO and checking its emptiness). Fix by instead checking whether rx_len has reached zero, which means that the transfer has been received in full. This is also more efficient as it avoids one bus read access per interrupt. Note that bcm2835_spi_transfer_one_poll() likewise uses rx_len to determine whether the transfer has finished. Signed-off-by:
Lukas Wunner <lukas@wunner.de> Fixes: e34ff011 ("spi: bcm2835: move to the transfer_one driver model") Cc: stable@vger.kernel.org # v4.1+ Cc: Mathias Duckeck <m.duckeck@kunbus.de> Cc: Frank Pavlic <f.pavlic@kunbus.de> Cc: Martin Sperl <kernel@martin.sperl.org> Cc: Noralf Trønnes <noralf@tronnes.org> Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Lukas Wunner authored
commit dbc94411 upstream. If submission of a DMA TX transfer succeeds but submission of the corresponding RX transfer does not, the BCM2835 SPI driver terminates the TX transfer but neglects to reset the dma_pending flag to false. Thus, if the next transfer uses interrupt mode (because it is shorter than BCM2835_SPI_DMA_MIN_LENGTH) and runs into a timeout, dmaengine_terminate_all() will be called both for TX (once more) and for RX (which was never started in the first place). Fix it. Signed-off-by:
-
Lukas Wunner authored
commit e82b0b38 upstream. If a DMA transfer finishes orderly right when spi_transfer_one_message() determines that it has timed out, the callbacks bcm2835_spi_dma_done() and bcm2835_spi_handle_err() race to call dmaengine_terminate_all(), potentially leading to double termination. Prevent by atomically changing the dma_pending flag before calling dmaengine_terminate_all(). Signed-off-by:
-
Theodore Ts'o authored
commit 18f2c4fc upstream. If the file system has been shut down or is read-only, then ext4_write_inode() needs to bail out early. Also use jbd2_complete_transaction() instead of ext4_force_commit() so we only force a commit if it is needed. Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org Signed-off-by:
-
Theodore Ts'o authored
commit fde87268 upstream. Some time back, nfsd switched from calling vfs_fsync() to using a new commit_metadata() hook in export_operations(). If the file system did not provide a commit_metadata() hook, it fell back to using sync_inode_metadata(). Unfortunately doesn't work on all file systems. In particular, it doesn't work on ext4 due to how the inode gets journalled --- the VFS writeback code will not always call ext4_write_inode(). So we need to provide our own ext4_nfs_commit_metdata() method which calls ext4_write_inode() directly. Google-Bug-Id: 121195940 Signed-off-by:
-
Theodore Ts'o authored
commit 8a363970 upstream. If we receive a file handle, either from NFS or open_by_handle_at(2), and it points at an inode which has not been initialized, and the file system has metadata checksums enabled, we shouldn't try to get the inode, discover the checksum is invalid, and then declare the file system as being inconsistent. This can be reproduced by creating a test file system via "mke2fs -t ext4 -O metadata_csum /tmp/foo.img 8M", mounting it, cd'ing into that directory, and then running the following program. #define _GNU_SOURCE #include <fcntl.h> struct handle { struct file_handle fh; unsigned char fid[MAX_HANDLE_SZ]; }; int main(int argc, char **argv) { struct handle h = {{8, 1 }, { 12, }}; open_by_handle_at(AT_FDCWD, &h.fh, O_RDONLY); return 0; } Google-Bug-Id: 120690101 Signed-off-by:
-
Theodore Ts'o authored
commit a805622a upstream. In ext4_expand_extra_isize_ea(), we calculate the total size of the xattr header, plus the xattr entries so we know how much of the beginning part of the xattrs to move when expanding the inode extra size. We need to include the terminating u32 at the end of the xattr entries, or else if there is uninitialized, non-zero bytes after the xattr entries and before the xattr values, the list of xattr entries won't be properly terminated. Reported-by:
Steve Graham <stgraham2000@gmail.com> Signed-off-by:
-
ruippan (潘睿) authored
commit e647e291 upstream. Commit e2b911c5 ("ext4: clean up feature test macros with predicate functions") broke the EXT4_IOC_GROUP_ADD ioctl. This was not noticed since only very old versions of resize2fs (before e2fsprogs 1.42) use this ioctl. However, using a new kernel with an enterprise Linux userspace will cause attempts to use online resize to fail with "No reserved GDT blocks". Fixes: e2b911c5 ("ext4: clean up feature test macros with predicate...") Cc: stable@kernel.org # v4.4 Signed-off-by:
ruippan (潘睿) <ruippan@tencent.com> Signed-off-by:
-
Maurizio Lombardi authored
commit 132d00be upstream. In case of error, ext4_try_to_write_inline_data() should unlock and release the page it holds. Fixes: f19d5870 ("ext4: add normal write support for inline data") Cc: stable@kernel.org # 3.8 Signed-off-by:
Maurizio Lombardi <mlombard@redhat.com> Signed-off-by:
-
Pan Bian authored
commit 61157b24 upstream. The function frees qf_inode via iput but then pass qf_inode to lockdep_set_quota_inode on the failure path. This may result in a use-after-free bug. The patch frees df_inode only when it is never used. Fixes: daf647d2 ("ext4: add lockdep annotations for i_data_sem") Cc: stable@kernel.org # 4.6 Reviewed-by:
Jan Kara <jack@suse.cz> Signed-off-by:
Pan Bian <bianpan2016@163.com> Signed-off-by:
-
Theodore Ts'o authored
commit fb265c9c upstream. Today, when sb_bread() returns NULL, this can either be because of an I/O error or because the system failed to allocate the buffer. Since it's an old interface, changing would require changing many call sites. So instead we create our own ext4_sb_bread(), which also allows us to set the REQ_META flag. Also fixed a problem in the xattr code where a NULL return in a function could also mean that the xattr was not found, which could lead to the wrong error getting returned to userspace. Fixes: ac27a0ec ("ext4: initial copy of files from ext3") Cc: stable@kernel.org # 2.6.19 Signed-off-by:
-
Greg Kurz authored
commit 2f07229f upstream. The AFU Descriptor Template in the PCI config space has a Name Space field which is a 24 Byte ASCII character string of descriptive name space for the AFU. The OCXL driver read the string four characters at a time with pci_read_config_dword(). This optimization is valid on a little-endian system since this is PCI, but a big-endian system ends up with each subset of four characters in reverse order. This could be fixed by switching to read characters one by one. Another option is to swap the bytes if we're big-endian. Go for the latter with le32_to_cpu(). Cc: stable@vger.kernel.org # v4.16 Signed-off-by:
Greg Kurz <groug@kaod.org> Acked-by:
Frederic Barrat <fbarrat@linux.ibm.com> Acked-by:
Andrew Donnellan <andrew.donnellan@au1.ibm.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Greg Kurz authored
commit e1e71e20 upstream. All fields in the PE are big-endian. Use cpu_to_be32() like everywhere else something is written to the PE. Otherwise a wrong TID will be used by the NPU. If this TID happens to point to an existing thread sharing the same mm, it could be woken up by error. This is highly improbable though. The likely outcome of this is the NPU not finding the target thread and forcing the AFU into sending an interrupt, which userspace is supposed to handle anyway. Fixes: e948e06f ("ocxl: Expose the thread_id needed for wait on POWER9") Cc: stable@vger.kernel.org # v4.18 Signed-off-by:
-
Arnaldo Carvalho de Melo authored
commit 804234f2 upstream. We'll set a new machine field based on env->arch, which for live mode, like with 'perf top' means we need to use uname() to figure the name of the arch, fix perf_env__arch() to consider both (env == NULL) and (env->arch == NULL) as local operation. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: David S. Miller <davem@davemloft.net> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Leo Yan <leo.yan@linaro.org> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Cc: stable@vger.kernel.org # 4.19 Link: https://lkml.kernel.org/n/tip-vcz4ufzdon7cwy8dm2ua53xk@git.kernel.orgSigned-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
-
Ben Hutchings authored
commit 11a64a05 upstream. Depending on which functions are inlined in util/pmu.c, the snprintf() calls in perf_pmu__parse_{scale,unit,per_pkg,snapshot}() might trigger a warning: util/pmu.c: In function 'pmu_aliases': util/pmu.c:178:31: error: '%s' directive output may be truncated writing up to 255 bytes into a region of size between 0 and 4095 [-Werror=format-truncation=] snprintf(path, PATH_MAX, "%s/%s.unit", dir, name); ^~ I found this when trying to build perf from Linux 3.16 with gcc 8. However I can reproduce the problem in mainline if I force __perf_pmu__new_alias() to be inlined. Suppress this by using scnprintf() as has been done elsewhere in perf. Signed-off-by:
Ben Hutchings <ben@decadent.org.uk> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/20181111184524.fux4taownc6ndbx6@decadent.org.ukSigned-off-by:
-
Adrian Hunter authored
commit 692d0e63 upstream. Branch stacks do not necessarily have the same cpumode as the 'ip'. Use the fallback functions in those cases. This patch depends on patch "perf tools: Add fallback functions for cases where cpumode is insufficient". Signed-off-by:
Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: David S. Miller <davem@davemloft.net> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Leo Yan <leo.yan@linaro.org> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: stable@vger.kernel.org # 4.19 Link: http://lkml.kernel.org/r/20181106210712.12098-4-adrian.hunter@intel.comSigned-off-by:
-
Adrian Hunter authored
commit 225f99e0 upstream. thread__resolve() is used in the sample_addr_correlates_sym() cases where 'addr' is a destination of a branch which does not necessarily have the same cpumode as the 'ip'. Use the fallback function in that case. This patch depends on patch "perf tools: Add fallback functions for cases where cpumode is insufficient". Signed-off-by:
-
Adrian Hunter authored
commit 8e80ad99 upstream. For branch stacks or branch samples, the sample cpumode might not be correct because it applies only to the sample 'ip' and not necessary to 'addr' or branch stack addresses. Add fallback functions that can be used to deal with those cases Signed-off-by:
-
Adrian Hunter authored
commit ec1891af upstream. Some architectures have a single address space for kernel and user addresses, which makes it possible to determine if an address is in kernel space or user space. Some don't, e.g.: sparc. Cache that info in perf_env so that, for instance, code needing to fallback failed symbol lookups at the kernel space in single address space arches can lookup at userspace. Signed-off-by:
-
Alexey Brodkin authored
commit bf287607 upstream. It turned out we used to use default implementation of sched_clock() from kernel/sched/clock.c which was as precise as 1/HZ, i.e. by default we had 10 msec granularity of time measurement. Now given ARC built-in timers are clocked with the same frequency as CPU cores we may get much higher precision of time tracking. Thus we switch to generic sched_clock which really reads ARC hardware counters. This is especially helpful for measuring short events. That's what we used to have: ------------------------------>8------------------------ $ perf stat /bin/sh -c /root/lmbench-master/bin/arc/hello > /dev/null Performance counter stats for '/bin/sh -c /root/lmbench-master/bin/arc/hello': 10.000000 task-clock (msec) # 2.832 CPUs utilized 1 context-switches # 0.100 K/sec 1 cpu-migrations # 0.100 K/sec 63 page-faults # 0.006 M/sec 3049480 cycles # 0.305 GHz 1091259 instructions # 0.36 insn per cycle 256828 branches # 25.683 M/sec 27026 branch-misses # 10.52% of all branches 0.003530687 seconds time elapsed 0.000000000 seconds user 0.010000000 seconds sys ------------------------------>8------------------------ And now we'll see: ------------------------------>8------------------------ $ perf stat /bin/sh -c /root/lmbench-master/bin/arc/hello > /dev/null Performance counter stats for '/bin/sh -c /root/lmbench-master/bin/arc/hello': 3.004322 task-clock (msec) # 0.865 CPUs utilized 1 context-switches # 0.333 K/sec 1 cpu-migrations # 0.333 K/sec 63 page-faults # 0.021 M/sec 2986734 cycles # 0.994 GHz 1087466 instructions # 0.36 insn per cycle 255209 branches # 84.947 M/sec 26002 branch-misses # 10.19% of all branches 0.003474829 seconds time elapsed 0.003519000 seconds user 0.000000000 seconds sys ------------------------------>8------------------------ Note how much more meaningful is the second output - time spent for execution pretty much matches number of cycles spent (we're runnign @ 1GHz here). Signed-off-by:
Alexey Brodkin <abrodkin@synopsys.com> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org Acked-by:
Vineet Gupta <vgupta@synopsys.com> Signed-off-by:
Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by:
-
Eugeniy Paltsev authored
commit 32e932e3 upstream. UDL doesn't support vblank functionality so we don't need to initialize vblank here (we are able to send page flip completion events even without vblank initialization) Moreover current drm_vblank_init call with num_crtcs > 0 causes sending DRM_EVENT_FLIP_COMPLETE event with zero timestamp every time. This breaks userspace apps (for example weston) which relies on timestamp value. Cc: stable@vger.kernel.org Signed-off-by:
Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20180928144126.21598-1-Eugeniy.Paltsev@synopsys.comSigned-off-by:
-
Eric Anholt authored
commit 2f20fa8d upstream. Fixes an oops reading this debugfs entry on BCM7278. Signed-off-by:
Eric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/msgid/20180928232126.4332-4-eric@anholt.net Fixes: 57692c94 ("drm/v3d: Introduce a new DRM driver for Broadcom V3D V3.x+") Cc: <stable@vger.kernel.org> Reviewed-by:
Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by:
-
Miquel Raynal authored
commit 81b1e6e6 upstream. Since the addition of platform MSI support, there were two helpers supposed to allocate/free IRQs for a device: platform_msi_domain_alloc_irqs() platform_msi_domain_free_irqs() In these helpers, IRQ descriptors are allocated in the "alloc" routine while they are freed in the "free" one. Later, two other helpers have been added to handle IRQ domains on top of MSI domains: platform_msi_domain_alloc() platform_msi_domain_free() Seen from the outside, the logic is pretty close with the former helpers and people used it with the same logic as before: a platform_msi_domain_alloc() call should be balanced with a platform_msi_domain_free() call. While this is probably what was intended to do, the platform_msi_domain_free() does not remove/free the IRQ descriptor(s) created/inserted in platform_msi_domain_alloc(). One effect of such situation is that removing a module that requested an IRQ will let one orphaned IRQ descriptor (with an allocated MSI entry) in the device descriptors list. Next time the module will be inserted back, one will observe that the allocation will happen twice in the MSI domain, one time for the remaining descriptor, one time for the new one. It also has the side effect to quickly overshoot the maximum number of allocated MSI and then prevent any module requesting an interrupt in the same domain to be inserted anymore. This situation has been met with loops of insertion/removal of the mvpp2.ko module (requesting 15 MSIs each time). Fixes: 552c494a ("platform-msi: Allow creation of a MSI-based stacked irq domain") Cc: stable@vger.kernel.org Signed-off-by:
Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by:
Marc Zyngier <marc.zyngier@arm.com> Signed-off-by:
-
Sean Christopherson authored
commit 1b3ab5ad upstream. Fixes: 34a1cd60 ("kvm: x86: vmx: move some vmx setting from vmx_init() to hardware_setup()") Cc: stable@vger.kernel.org Signed-off-by:
Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
-
Marc Zyngier authored
commit c987876a upstream. Contrary to the non-VHE version of the TLB invalidation helpers, the VHE code has interrupts enabled, meaning that we can take an interrupt in the middle of such a sequence, and start running something else with HCR_EL2.TGE cleared. That's really not a good idea. Take the heavy-handed option and disable interrupts in __tlb_switch_to_guest_vhe, restoring them in __tlb_switch_to_host_vhe. The latter also gain an ISB in order to make sure that TGE really has taken effect. Cc: stable@vger.kernel.org Acked-by:
Christoffer Dall <christoffer.dall@arm.com> Reviewed-by:
James Morse <james.morse@arm.com> Signed-off-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
-
Sean Christopherson authored
commit e8143499 upstream. ____kvm_handle_fault_on_reboot() provides a generic exception fixup handler that is used to cleanly handle faults on VMX/SVM instructions during reboot (or at least try to). If there isn't a reboot in progress, ____kvm_handle_fault_on_reboot() treats any exception as fatal to KVM and invokes kvm_spurious_fault(), which in turn generates a BUG() to get a stack trace and die. When it was originally added by commit 4ecac3fd ("KVM: Handle virtualization instruction #UD faults during reboot"), the "call" to kvm_spurious_fault() was handcoded as PUSH+JMP, where the PUSH'd value is the RIP of the faulting instructing. The PUSH+JMP trickery is necessary because the exception fixup handler code lies outside of its associated function, e.g. right after the function. An actual CALL from the .fixup code would show a slightly bogus stack trace, e.g. an extra "random" function would be inserted into the trace, as the return RIP on the stack would point to no known function (and the unwinder will likely try to guess who owns the RIP). Unfortunately, the JMP was replaced with a CALL when the macro was reworked to not spin indefinitely during reboot (commit b7c4145b "KVM: Don't spin on virt instruction faults during reboot"). This causes the aforementioned behavior where a bogus function is inserted into the stack trace, e.g. my builds like to blame free_kvm_area(). Revert the CALL back to a JMP. The changelog for commit b7c4145b ("KVM: Don't spin on virt instruction faults during reboot") contains nothing that indicates the switch to CALL was deliberate. This is backed up by the fact that the PUSH <insn RIP> was left intact. Note that an alternative to the PUSH+JMP magic would be to JMP back to the "real" code and CALL from there, but that would require adding a JMP in the non-faulting path to avoid calling kvm_spurious_fault() and would add no value, i.e. the stack trace would be the same. Using CALL: ------------[ cut here ]------------ kernel BUG at /home/sean/go/src/kernel.org/linux/arch/x86/kvm/x86.c:356! invalid opcode: 0000 [#1] SMP CPU: 4 PID: 1057 Comm: qemu-system-x86 Not tainted 4.20.0-rc6+ #75 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 RIP: 0010:kvm_spurious_fault+0x5/0x10 [kvm] Code: <0f> 0b 66 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 41 55 49 89 fd 41 RSP: 0018:ffffc900004bbcc8 EFLAGS: 00010046 RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffffffffffffffff RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: ffff888273fd8000 R08: 00000000000003e8 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000784 R12: ffffc90000371fb0 R13: 0000000000000000 R14: 000000026d763cf4 R15: ffff888273fd8000 FS: 00007f3d69691700(0000) GS:ffff888277800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000055f89bc56fe0 CR3: 0000000271a5a001 CR4: 0000000000362ee0 Call Trace: free_kvm_area+0x1044/0x43ea [kvm_intel] ? vmx_vcpu_run+0x156/0x630 [kvm_intel] ? kvm_arch_vcpu_ioctl_run+0x447/0x1a40 [kvm] ? kvm_vcpu_ioctl+0x368/0x5c0 [kvm] ? kvm_vcpu_ioctl+0x368/0x5c0 [kvm] ? __set_task_blocked+0x38/0x90 ? __set_current_blocked+0x50/0x60 ? __fpu__restore_sig+0x97/0x490 ? do_vfs_ioctl+0xa1/0x620 ? __x64_sys_futex+0x89/0x180 ? ksys_ioctl+0x66/0x70 ? __x64_sys_ioctl+0x16/0x20 ? do_syscall_64+0x4f/0x100 ? entry_SYSCALL_64_after_hwframe+0x44/0xa9 Modules linked in: vhost_net vhost tap kvm_intel kvm irqbypass bridge stp llc ---[ end trace 9775b14b123b1713 ]--- Using JMP: ------------[ cut here ]------------ kernel BUG at /home/sean/go/src/kernel.org/linux/arch/x86/kvm/x86.c:356! invalid opcode: 0000 [#1] SMP CPU: 6 PID: 1067 Comm: qemu-system-x86 Not tainted 4.20.0-rc6+ #75 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 RIP: 0010:kvm_spurious_fault+0x5/0x10 [kvm] Code: <0f> 0b 66 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 41 55 49 89 fd 41 RSP: 0018:ffffc90000497cd0 EFLAGS: 00010046 RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffffffffffffffff RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: ffff88827058bd40 R08: 00000000000003e8 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000784 R12: ffffc90000369fb0 R13: 0000000000000000 R14: 00000003c8fc6642 R15: ffff88827058bd40 FS: 00007f3d7219e700(0000) GS:ffff888277900000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f3d64001000 CR3: 0000000271c6b004 CR4: 0000000000362ee0 Call Trace: vmx_vcpu_run+0x156/0x630 [kvm_intel] ? kvm_arch_vcpu_ioctl_run+0x447/0x1a40 [kvm] ? kvm_vcpu_ioctl+0x368/0x5c0 [kvm] ? kvm_vcpu_ioctl+0x368/0x5c0 [kvm] ? __set_task_blocked+0x38/0x90 ? __set_current_blocked+0x50/0x60 ? __fpu__restore_sig+0x97/0x490 ? do_vfs_ioctl+0xa1/0x620 ? __x64_sys_futex+0x89/0x180 ? ksys_ioctl+0x66/0x70 ? __x64_sys_ioctl+0x16/0x20 ? do_syscall_64+0x4f/0x100 ? entry_SYSCALL_64_after_hwframe+0x44/0xa9 Modules linked in: vhost_net vhost tap kvm_intel kvm irqbypass bridge stp llc ---[ end trace f9daedb85ab3ddba ]--- Fixes: b7c4145b ("KVM: Don't spin on virt instruction faults during reboot") Cc: stable@vger.kernel.org Signed-off-by:
-
Dan Williams authored
commit ba6f508d upstream. Commit: f77084d9 "x86/mm/pat: Disable preemption around __flush_tlb_all()" addressed a case where __flush_tlb_all() is called without preemption being disabled. It also left a warning to catch other cases where preemption is not disabled. That warning triggers for the memory hotplug path which is also used for persistent memory enabling: WARNING: CPU: 35 PID: 911 at ./arch/x86/include/asm/tlbflush.h:460 RIP: 0010:__flush_tlb_all+0x1b/0x3a [..] Call Trace: phys_pud_init+0x29c/0x2bb kernel_physical_mapping_init+0xfc/0x219 init_memory_mapping+0x1a5/0x3b0 arch_add_memory+0x2c/0x50 devm_memremap_pages+0x3aa/0x610 pmem_attach_disk+0x585/0x700 [nd_pmem] Andy wondered why a path that can sleep was using __flush_tlb_all() [1] and Dave confirmed the expectation for TLB flush is for modifying / invalidating existing PTE entries, but not initial population [2]. Drop the usage of __flush_tlb_all() in phys_{p4d,pud,pmd}_init() on the expectation that this path is only ever populating empty entries for the linear map. Note, at linear map teardown time there is a call to the all-cpu flush_tlb_all() to invalidate the removed mappings. [1]: https://lkml.kernel.org/r/9DFD717D-857D-493D-A606-B635D72BAC21@amacapital.net [2]: https://lkml.kernel.org/r/749919a4-cdb1-48a3-adb4-adb81a5fa0b5@intel.com [ mingo: Minor readability edits. ] Suggested-by:
Dave Hansen <dave.hansen@linux.intel.com> Reported-by:
Andy Lutomirski <luto@kernel.org> Signed-off-by:
Dan Williams <dan.j.williams@intel.com> Acked-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by:
Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: <stable@vger.kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@surriel.com> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: dave.hansen@intel.com Fixes: f77084d9 ("x86/mm/pat: Disable preemption around __flush_tlb_all()") Link: http://lkml.kernel.org/r/154395944713.32119.15611079023837132638.stgit@dwillia2-desk3.amr.corp.intel.comSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Michal Hocko authored
commit 5b5e4d62 upstream. Swap storage is restricted to max_swapfile_size (~16TB on x86_64) whenever the system is deemed affected by L1TF vulnerability. Even though the limit is quite high for most deployments it seems to be too restrictive for deployments which are willing to live with the mitigation disabled. We have a customer to deploy 8x 6,4TB PCIe/NVMe SSD swap devices which is clearly out of the limit. Drop the swap restriction when l1tf=off is specified. It also doesn't make much sense to warn about too much memory for the l1tf mitigation when it is forcefully disabled by the administrator. [ tglx: Folded the documentation delta change ] Fixes: 377eeaa8 ("x86/speculation/l1tf: Limit swap file size to MAX_PA/2") Signed-off-by:
Michal Hocko <mhocko@suse.com> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Reviewed-by:
Pavel Tatashin <pasha.tatashin@soleen.com> Reviewed-by:
Andi Kleen <ak@linux.intel.com> Acked-by:
Jiri Kosina <jkosina@suse.cz> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: <linux-mm@kvack.org> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20181113184910.26697-1-mhocko@kernel.orgSigned-off-by:
-
Patrick Dreyer authored
commit 7db54c89 upstream. This adds ELAN0501 to the ACPI table to support Elan touchpad found in ASUS Aspire F5-573G. Signed-off-by:
Patrick Dreyer <Patrick.Dreyer@gmail.com> Cc: stable@vger.kernel.org Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
Sanjeev Chugh authored
commit 1e3c336a upstream. If the user attempts to update Atmel device with an invalid configuration cfg file, error handling code is trying to free cfg file memory which is not allocated yet hence results into kernel crash. This patch fixes the order of memory free operations. Signed-off-by:
Sanjeev Chugh <sanjeev_chugh@mentor.com> Fixes: a4891f10 ("Input: atmel_mxt_ts - zero terminate config firmware file") Cc: stable@vger.kernel.org Signed-off-by:
-
Sebastian Ott authored
commit 98dfd326 upstream. When triggered by pci hotplug (PEC 0x306) clp_get_state is called with spinlocks held resulting in the following warning: zpci: n/a: Event 0x306 reconfigured PCI function 0x0 BUG: sleeping function called from invalid context at mm/page_alloc.c:4324 in_atomic(): 1, irqs_disabled(): 0, pid: 98, name: kmcheck 2 locks held by kmcheck/98: Change the allocation to use GFP_ATOMIC. Cc: stable@vger.kernel.org # 4.13+ Signed-off-by:
Sebastian Ott <sebott@linux.ibm.com> Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by:
-
Hans de Goede authored
commit 94ea56cf upstream. The Gnawty model Chromebook uses pmc_plt_clk_0 instead of pmc_plt_clk_3 for the mclk, just like the Clapper and Swanky models. This commit adds a DMI based quirk for this. This fixing audio no longer working on these devices after commit 648e9218 ("clk: x86: Stop marking clocks as CLK_IS_CRITICAL") that commit fixes us unnecessary keeping unused clocks on, but in case of the Gnawty that was breaking audio support since we were not using the right clock in the cht_bsw_max98090_ti machine driver. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=201787 Cc: stable@vger.kernel.org Fixes: 648e9218 ("clk: x86: Stop marking clocks as CLK_IS_CRITICAL") Reported-and-tested-by:
Jaime Pérez <19.jaime.91@gmail.com> Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Acked-by:
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by:
-
Hans de Goede authored
commit 984bfb39 upstream. The Clapper model Chromebook uses pmc_plt_clk_0 instead of pmc_plt_clk_3 for the mclk, just like the Swanky model. This commit adds a DMI based quirk for this. This fixing audio no longer working on these devices after commit 648e9218 ("clk: x86: Stop marking clocks as CLK_IS_CRITICAL") that commit fixes us unnecessary keeping unused clocks on, but in case of the Clapper that was breaking audio support since we were not using the right clock in the cht_bsw_max98090_ti machine driver. Cc: stable@vger.kernel.org Fixes: 648e9218 ("clk: x86: Stop marking clocks as CLK_IS_CRITICAL") Signed-off-by:
-
Colin Ian King authored
commit c58eef06 upstream. Currently the cmd.read_write setting is not initialized so it contains garbage from the stack. Fix this by setting it to 0 to indicate a read is required. Detected by CoverityScan, CID#1357925 ("Uninitialized scalar variable") Fixes: c5c77ba1 ("staging: wilc1000: Add SDIO/SPI 802.11 driver") Signed-off-by:
Colin Ian King <colin.king@canonical.com> Cc: stable <stable@vger.kernel.org> Acked-by:
Ajay Singh <ajay.kathat@microchip.com> Signed-off-by:
-
