refactors NULL conditionals
Signed-off-by: Mark Hounschell <markh@compro.net>
Tested-by: Mark Hounschell <markh@compro.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Added {} braces and newlines to address the following:

ERROR: else should follow close brace '}'
ERROR: space required before the open brace '{'
ERROR: trailing statements should be on next line
ERROR: space required before the open parenthesis '('
ERROR: that open brace { should be on the previous line
Signed-off-by: Chaitanya Hazarey <c@24.io>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Added spaces needed in the proper places to address:

WARNING: please, no spaces at the start of a line
WARNING: missing space after struct definition
ERROR: spaces required around that '!=' (ctx:WxV)
ERROR: spaces required around that '=' (ctx:WxV)
ERROR: spaces required around that '=' (ctx:VxW)
ERROR: spaces required around that '&&' (ctx:VxV)
ERROR: spaces required around that '!=' (ctx:VxV)
ERROR: spaces required around that '=' (ctx:VxV)
ERROR: spaces required around that '==' (ctx:VxV)
ERROR: spaces required around that '<' (ctx:VxV)
ERROR: space required before the open parenthesis '('
ERROR: space required before the open brace '{'
ERROR: space required after that ',' (ctx:VxV)
ERROR: space required after that close brace '}'
ERROR: space prohibited before that '--' (ctx:WxO)
ERROR: space prohibited before that close parenthesis ')'
ERROR: space prohibited after that open parenthesis '('
Signed-off-by: Chaitanya Hazarey <c@24.io>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

There are references to four undefined Kconfig macros in the code.
Commit 8542373d ("Staging: rtl8812ae: remove undefined Kconfig
macros") removed identical references from another staging driver, but
they resurfaced in rtl8192ee. Remove these again as the checks for them
still will always evaluate to false.
Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

added newlines after declarations in two places
Signed-off-by: Robin Schroer <sulamiification@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

wlan_bssdef.h was included twice.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

version.h inclusion is not needed as detected by versioncheck.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Factor the fifo half-full handling out of the interrupt function to reduce
the indent level of the code.

Tidy up the factored out code.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The (*do_cmdtest) validates that the 'stop_arg' is >= 1 for a 'stop_src'
of TRIG_COUNT and the 'scan_end_arg' is validated to be the 'chanlist_len'
which will always be >= 1. Remove the unreachable error code for an
'ai_sample_count < 1'.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use the comedi_fc helper to get the number of bytes per scan.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use the comedi_fc helper to get the number of bytes per scan.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use the comedi_fc helper to get the number of bytes per scan.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use the comedi_fc helper to get the number of bytes per scan.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use the comedi_fc helper function to get the 'bytes_per_scan'.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The cmd->chanlist_len will always be >= 1 in this function. Remove the
unnecessary checks.

Use the comedi_fc helper function to get the 'bytes_per_scan'.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use a local variable to access the comedi_cmd as a pointer instead
of getting to from the comedi_subdevice pointer.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The caller already has the comedi_subdevice and comedi_cmd pointers. Pass
those variables to the helper function.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use a local variable to access the comedi_cmd as a pointer instead
of getting to from the comedi_async pointer.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use a local variable to access the comedi_cmd as a pointer instead
of getting to from the comedi_async pointer.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use a local variable to access the comedi_cmd as a pointer instead
of getting to from the comedi_async pointer.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use a local variable to access the comedi_cmd as a pointer instead
of getting to from the comedi_async pointer.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use a local variable to access the comedi_cmd as a pointer instead
of getting to from the comedi_subdevice pointer.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The calculation for the total number of bytes in the DMA transfer
is incorrect. Fix it.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This member of the private data can be determined from the cmd->stop_src.
Do that instead and remove the member.

Refactor pcmmio_handle_dio_intr() to remove an indent level.

For aesthetics, change the switch in pcmmio_cmd() to an if/else.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use a local variable to access the comedi_cmd as a pointer instead
of getting to from the comedi_subdevice pointer.

Remove the unnecessary local variables used for the cmd->chanlist_len.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Tidy up the local variables so that the comedi_cmd is accessed as a pointer
instead of getting to it from the comedi_subdevice pointer.

Remove the local variable 'len' and use the cmd->chanlist_len directly.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use the local variable to access the comedi_cmd as a pointer instead
of getting to it from the comedi_subdevice pointer.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This function does not use the comedi_cmd. Remove the commented out
local variable.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Tidy up the local variables so that the comedi_cmd is accessed as a pointer
instead of getting to it from the comedi_async pointer.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use the local variable to access the comedi_cmd as a pointer instead
of getting to it from the comedi_subdevice pointer.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use the local variable to access the comedi_cmd as a pointer instead
of getting to it from the comedi_async pointer.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use the local variable to access the comedi_cmd as a pointer in
pci230_handle_ai() instead of getting to it from the comedi_async
pointer.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use the local variable to access the comedi_cmd as a pointer in
pci224_ao_munge() instead of getting to it from the comedi_async
pointer.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use the local variable to access the comedi_cmd as a pointer
in dio200_read_scan_intr() instead of getting to it from the
comedi_subdevice pointer.

Remove the unnecessary local variable 'len', this is just the
cmd->chanlist_len.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This member of the private data can be determined from the
cmd->stop_src. Do that instead.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

For aesthetics, use a local variable to access the comedi_cmd as a
pointer in das800_ai_do_cmd() instead of getting to it from the
comedi_async pointer.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This member of the private data is just a copy of the channels from
the cmd->chanlist. Remove the member and just use the cmd->chanlist
directly.

Remove the unneeded 'len' local variable in usbduxsigma_ao_urb_complete().
This is just the cmd->chanlist_len.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use the 'cmd' pointer to access the chanlist instead of getting to it
using the comedi_subdevice pointer.

Remove the unneeded 'n' local variable, this is just the cmd->chanlist_len.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This member of the private data is just a copy of the channels from
the cmd->chanlist. Remove the member and just use the cmd->chanlist
directly.

Remove the unneeded 'len' local variable in usbdux_ao_isoc_irq().
This is just the cmd->chanlist_len.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This member of the private data can be determined from the cmd->stop_src.
Do that instead.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>