- 20 Dec, 2007 16 commits
-
-
Joe Perches authored
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Joe Perches authored
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Joe Perches authored
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Joe Perches authored
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Joe Perches authored
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Joe Perches authored
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
This operation helper abstracts: skb->mac_header = skb->data; but it was done in two more places which were actually: skb->mac_header = skb->network_header; and those are corrected here. Signed-off-by: David S. Miller <davem@davemloft.net>
-
Timo Teras authored
mac_header update in ipgre_recv() was incorrectly changed to skb_reset_mac_header() when it was introduced. Signed-off-by: Timo Teras <timo.teras@iki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Paul Moore authored
In several places the arguments to the xfrm_audit_start() function are in the wrong order resulting in incorrect user information being reported. This patch corrects this by pacing the arguments in the correct order. Signed-off-by: Paul Moore <paul.moore@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Herbert Xu authored
The aalgos/ealgos fields are only 32 bits wide. However, af_key tries to test them with the expression 1 << id where id can be as large as 253. This produces different behaviour on different architectures. The following patch explicitly checks whether ID is greater than 31 and fails the check if that's the case. We cannot easily extend the mask to be longer than 32 bits due to exposure to user-space. Besides, this whole interface is obsolete anyway in favour of the xfrm_user interface which doesn't use this bit mask in templates (well not within the kernel anyway). Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Mark Ryden authored
In arp_process() (net/ipv4/arp.c), there is unused code: definition and assignment of tha (target hw address ). Signed-off-by: Mark Ryden <markryde@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Al Viro authored
tg3_nvram_write_block_unbuffered() is reading data from nvram into allocated buffer before overwriting a part of it with user-supplied data. Then it feeds the entire page back to nvram. It should be storing the words it had read as little-endian, not as host-endian. Note that tg3_set_eeprom() does exactly that for padding the same data to full words before it gets passed down to tg3_nvram_write_block() and then to tg3_nvram_write_block_unbuffered(). Moreover, when we get to sending the entire thing back to nvram, we go through it word-by-word, doing essentially writel(swab32(le32_to_cpu(word)), ...) so if we want them to reach the card in host-independent endianness, we'd better really have all that buffer filled with fixed-endian. For user-supplied part we obviously do have that (it's an array of octets memcpy'd in), ditto for padding of user-supplied part to word boundaries (taken care of in tg3_set_eeprom()). The rest of the buffer gets filled by tg3_nvram_write_block_unbuffered() and it would damn better be consistent with that (and with tg3_get_eeprom(), while we are at it - there we also convert the words read from nvram to little-endian before returning the buffer to user). The bug should get triggered on big-endian boxen when set_eeprom is done for less than entire page. Then the words that should've been unaffected at all will actually get byteswapped in place in nvram. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Al Viro authored
Fixed misannotations, introduced a new helper - tg3_nvram_read_le(). It gets __le32 * instead of u32 * and puts there the value converted to little-endian. A lot of callers of tg3_nvram_read() were doing that; converted them to tg3_nvram_read_le(). At that point the driver is practically endian-clean; the only remaining place is an actual bug, AFAICS; will be dealt with in the next patch. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Cyrill Gorcunov authored
Fix inappropriate memory freeing in case of requested rate_control_ops was not found. In this case the list head entity is going to be accidentally wasted. Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com> Acked-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Johannes Berg authored
When using recvfrom() on a SOCK_DGRAM packet socket, I noticed that the MAC address passed back for wireless frames was always completely wrong. The reason for this is that the header parse function assigned to our virtual interfaces is a function parsing an 802.11 rather than 802.3 header. This patch fixes it by keeping the default ethernet header operations assigned. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Michael Wu authored
There is no point in staying in IEEE80211_ASSOCIATED if there is no sta_info entry to receive frames with. Signed-off-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
- 19 Dec, 2007 19 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6Linus Torvalds authored
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6: [IA64] Adjust CMCI mask on CPU hotplug [IA64] make flush_tlb_kernel_range() an inline function [IA64] Guard elfcorehdr_addr with #if CONFIG_PROC_FS [IA64] Fix Altix BTE error return status [IA64] Remove assembler warnings on head.S [IA64] Remove compiler warinings about uninitialized variable in irq_ia64.c [IA64] set_thread_area fails in IA32 chroot [IA64] print kernel release in OOPS to make kerneloops.org happy [IA64] Two trivial spelling fixes [IA64] Avoid unnecessary TLB flushes when allocating memory [IA64] ia32 nopage [IA64] signal: remove redundant code in setup_sigcontext() IA64: Slim down __clear_bit_unlock
-
Alan Cox authored
Bug #9261 Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Geoff Levand authored
The dev_id arg passed to free_irq() must match that passed to request_irq(). Fixes this PS3 error message: Trying to free already-free IRQ 44 Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Geert Uytterhoeven authored
ps3fb: Update for firmware 2.10 As of PS3 firmware version 2.10, the GPU command buffer size must be at least 2 MiB large. Since we use only a small part of the GPU command buffer and don't want to waste precious XDR memory, move the GPU command buffer back to the start of the XDR memory reserved for ps3fb and let the unused part overlap with the actual frame buffer. Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6: [SCSI] initio: bugfix for accessors patch [SCSI] st: fix kernel BUG at include/linux/scatterlist.h:59! [SCSI] initio: fix conflict when loading driver [SCSI] sym53c8xx: fix "irq X: nobody cared" regression [SCSI] dpt_i2o: driver is only 32 bit so don't set 64 bit DMA mask [SCSI] sym53c8xx: fix free_irq() regression
-
Linus Torvalds authored
Krzysztof Oledzki noticed a dirty page accounting leak on some of his machines, causing the machine to eventually lock up when the kernel decided that there was too much dirty data, but nobody could actually write anything out to fix it. The culprit turns out to be filesystems (cough ext3 with data=journal cough) that re-dirty the page when the "->invalidatepage()" callback is called. Fix it up by doing a final dirty page accounting check when we actually remove the page from the page cache. This fixes bugzilla entry 9182: http://bugzilla.kernel.org/show_bug.cgi?id=9182Tested-by: Ingo Molnar <mingo@elte.hu> Tested-by: Krzysztof Oledzki <olel@ans.pl> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Hidetoshi Seto authored
Currently CMCI mask of hot-added CPU is always disabled after CPU hotplug. We should adjust this mask depending on CMC polling state. Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Signed-off-by: Satoru Takeuchi <takeuchi_satoru@jp.fujitsu.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
-
Jan Beulich authored
This fixes an unused variable warning in mm/vmalloc.c. Tony: also fix resulting fallout in uncached.c with a typo in args to flush_tlb_kernel_range(). Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
-
Simon Horman authored
Access to elfcorehdr_addr needs to be guarded by #if CONFIG_PROC_FS as well as the existing #if guards. Fixes the following build problem: arch/ia64/hp/common/built-in.o: In function `sba_init':arch/ia64/hp/common/sba_iommu.c:2043: undefined reference to `elfcorehdr_addr' :arch/ia64/hp/common/sba_iommu.c:2043: undefined reference to `elfcorehdr_addr' Signed-off-by: Simon Horman <horms@verge.net.au> Signed-off-by: Tony Luck <tony.luck@intel.com>
-
Russ Anderson authored
The Altix shub2 BTE error detail bits are in a different location than on shub1. The current code does not take this into account resulting in all shub2 BTE failures mapping to "unknown". This patch reads the error detail bits from the proper location, so the correct BTE failure reason is returned for both shub1 and shub2. Signed-off-by: Russ Anderson <rja@sgi.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
-
Hidetoshi Seto authored
This patch removes the following assembler warning messages. AS arch/ia64/kernel/head.o arch/ia64/kernel/head.S: Assembler messages: arch/ia64/kernel/head.S:1179: Warning: Use of 'ld8' violates RAW dependency 'CR[PTA]' (data) arch/ia64/kernel/head.S:1179: Warning: Only the first path encountering the conflict is reported arch/ia64/kernel/head.S:1178: Warning: This is the location of the conflicting usage arch/ia64/kernel/head.S:1180: Warning: Use of 'ld8' violates RAW dependency 'CR[PTA]' (data) arch/ia64/kernel/head.S:1180: Warning: Only the first path encountering the conflict is reported arch/ia64/kernel/head.S:1178: Warning: This is the location of the conflicting usage : arch/ia64/kernel/head.S:1213: Warning: Use of 'ldf.fill.nta' violates RAW dependency 'CR[PTA]' (data) arch/ia64/kernel/head.S:1213: Warning: Only the first path encountering the conflict is reported arch/ia64/kernel/head.S:1178: Warning: This is the location of the conflicting usage Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
-
Kenji Kaneshige authored
This patch removes the following compiler warning messages. CC arch/ia64/kernel/irq_ia64.o arch/ia64/kernel/irq_ia64.c: In function 'create_irq': arch/ia64/kernel/irq_ia64.c:343: warning: 'domain.bits[0u]' may be used uninitialized in this function arch/ia64/kernel/irq_ia64.c: In function 'assign_irq_vector': arch/ia64/kernel/irq_ia64.c:203: warning: 'domain.bits[0u]' may be used uninitialized in this function Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
-
Ian Wienand authored
I tried to upgrade an IA32 chroot on my IA64 to a new glibc with TLS. It kept dying because set_thread_area was returning -ESRCH (bugs.debian.org/451939). I instrumented arch/ia64/ia32/sys_ia32.c:get_free_idx() and ended up seeing output like [pid] idx desc->a desc->b ----------------------------- [2710] 0 -> c6b0ffff 40dff31b [2710] 1 -> 0 0 [2710] 2 -> 0 0 [2710] 0 -> c6b0ffff 40dff31b [2710] 1 -> c6b0ffff 40dff31b [2710] 2 -> 0 0 [2711] 0 -> c6b0ffff 40dff31b [2711] 1 -> c6b0ffff 40dff31b [2711] 2 -> 48c0ffff 40dff317 which suggested to me that TLS pointers were surviving exec() calls, leading to GDT pointers filling up and the eventual failure of get_free_idx(). I think the solution is flushing the tls array on exec. Signed-Off-By: Ian Wienand <ianw@gelato.unsw.edu.au> Signed-off-by: Tony Luck <tony.luck@intel.com>
-
Luck, Tony authored
The ia64 oops message doesn't include the kernel version, which makes it hard to automatically categorize oops messages scraped from mailing lists and bug databases. Signed-off-by: Tony Luck <tony.luck@intel.com>
-
Joe Perches authored
s/addres/address/ s/performanc/performance/ Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
-
Improve performance of memory allocations on ia64 by avoiding a global TLB purge to purge a single page from the file cache. This happens whenever we evict a page from the buffer cache to make room for some other allocation. Test case: Run 'find /usr -type f | xargs cat > /dev/null' in the background to fill the buffer cache, then run something that uses memory, e.g. 'gmake -j50 install'. Instrumentation showed that the number of global TLB purges went from a few millions down to about 170 over a 12 hours run of the above. The performance impact is particularly noticeable under virtualization, because a virtual TLB is generally both larger and slower to purge than a physical one. Signed-off-by: Christophe de Dinechin <ddd@hp.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
-
Nick Piggin authored
Convert ia64's ia32 support from nopage to fault. Signed-off-by: Nick Piggin <npiggin@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Tony Luck <tony.luck@intel.com>
-
Shi Weihua authored
This patch removes some redundant code in the function setup_sigcontext(). The registers ar.ccv,b7,r14,ar.csd,ar.ssd,r2-r3 and r16-r31 are not restored in restore_sigcontext() when (flags & IA64_SC_FLAG_IN_SYSCALL) is true. So we don't need to zero those variables in setup_sigcontext(). Signed-off-by: Shi Weihua <shiwh@cn.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Tony Luck <tony.luck@intel.com>
-
Christoph Lameter authored
__clear_bit_unlock does not need to perform atomic operations on the variable. Avoid a cmpxchg and simply do a store with release semantics. Add a barrier to be safe that the compiler does not do funky things. Tony: Use intrinsic rather than inline assembler Signed-off-by: Christoph Lameter <clameter@sgi.com> Acked-by: Nick Piggin <nickpiggin@yahoo.com.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Tony Luck <tony.luck@intel.com>
-
- 18 Dec, 2007 5 commits
-
-
Boaz Harrosh authored
patch: [SCSI] initio: convert to use the data buffer accessors had a small but fatal bug in that it didn't increment the pointer into the initio scatterlist descriptors as it looped over the block generated ones. Fixed here. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
-
FUJITA Tomonori authored
This is caused by a missing scatterlist initialisation (it only shows up when sg list handling debugging is turned on). Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: Kai Makisara <Kai.Makisara@kolumbus.fi> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
-
Alan Cox authored
> I have a scanner connected to a Initio INI-950 SCSI card and I recently > upgraded from SuSE 10.2 to 10.3. The new kernel doesn't see any of my > devices. I get the following in /var/log/messages: > > ACPI: PCI Interrupt 0000:00:0a.0[A] -> GSI 17 (level, low) -> IRQ 16 > initio: I/O port range 0x0 is busy. > ACPI: PCI interrupt for device 0000:00:0a.0 disabled Humm not a collision - thats a bug in the driver updating. Looks like the changes I made and combined with Christoph's lost a line somewhere when I was merging it all. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
-
Tony Battersby authored
The patch described by the following excerpt from ChangeLog-2.6.24-rc1 eventually causes a "irq X: nobody cared" error after a while: commit 99c9e0a1 Author: Matthew Wilcox <matthew@wil.cx> Date: Fri Oct 5 15:55:12 2007 -0400 [SCSI] sym53c8xx: Make interrupt handler capable of returning IRQ_NONE After this happens, the kernel disables the IRQ, causing the SCSI card to stop working until the next reboot. The problem is caused by the interrupt handler returning IRQ_NONE instead of IRQ_HANDLED after handling an interrupt-on-the-fly (INTF) condition. The following patch fixes the problem. Signed-off-by: Tony Battersby <tonyb@cybernetics.com> Acked-by: Matthew Wilcox <willy@linux.intel.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
-
James Bottomley authored
This fixes a potential corruption bug where the truncation would cause reading or writing to the wrong memory area on machines with >4GB of main memory. Cc: Stable Kernel Tree <stable@kernel.org> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
-