- 03 Apr, 2009 40 commits
-
-
David Howells authored
Read pages from an FS-Cache data storage object representing an inode into an NFS inode. Signed-off-by:
David Howells <dhowells@redhat.com> Acked-by:
Steve Dickson <steved@redhat.com> Acked-by:
Trond Myklebust <Trond.Myklebust@netapp.com> Acked-by:
Al Viro <viro@zeniv.linux.org.uk> Tested-by:
Daire Byrne <Daire.Byrne@framestore.com>
-
David Howells authored
nfs_readpage_async() needs to be non-static so that it can be used as a fallback for the local on-disk caching should an EIO crop up when reading the cache. Signed-off-by:
-
David Howells authored
Add read context retention so that FS-Cache can call back into NFS when a read operation on the cache fails EIO rather than reading data. This permits NFS to then fetch the data from the server instead using the appropriate security context. Signed-off-by:
-
David Howells authored
FS-Cache page management for NFS. This includes hooking the releasing and invalidation of pages marked with PG_fscache (aka PG_private_2) and waiting for completion of the write-to-cache flag (PG_fscache_write aka PG_owner_priv_2). Signed-off-by:
-
David Howells authored
Add some new NFS I/O counters for FS-Cache doing things for NFS. A new line is emitted into /proc/pid/mountstats if caching is enabled that looks like: fsc: <rok> <rfl> <wok> <wfl> <unc> Where <rok> is the number of pages read successfully from the cache, <rfl> is the number of failed page reads against the cache, <wok> is the number of successful page writes to the cache, <wfl> is the number of failed page writes to the cache, and <unc> is the number of NFS pages that have been disconnected from the cache. Signed-off-by:
-
David Howells authored
Invalidate the FsCache page flags on the pages belonging to an inode when the cache backing that NFS inode is removed. This allows a live cache to be withdrawn. Signed-off-by:
-
David Howells authored
Bind data storage objects in the local cache to NFS inodes. Signed-off-by:
-
David Howells authored
Define and create inode-level cache data storage objects (as managed by nfs_inode structs). Each inode-level object is created in a superblock-level index object and is itself a data storage object into which pages from the inode are stored. The inode object key is the NFS file handle for the inode. The inode object is given coherency data to carry in the auxiliary data permitted by the cache. This is a sequence made up of: (1) i_mtime from the NFS inode. (2) i_ctime from the NFS inode. (3) i_size from the NFS inode. (4) change_attr from the NFSv4 attribute data. As the cache is a persistent cache, the auxiliary data is checked when a new NFS in-memory inode is set up that matches an already existing data storage object in the cache. If the coherency data is the same, the on-disk object is retained and used; if not, it is scrapped and a new one created. Signed-off-by:
-
David Howells authored
Define and create superblock-level cache index objects (as managed by nfs_server structs). Each superblock object is created in a server level index object and is itself an index into which inode-level objects are inserted. Ideally there would be one superblock-level object per server, and the former would be folded into the latter; however, since the "nosharecache" option exists this isn't possible. The superblock object key is a sequence consisting of: (1) Certain superblock s_flags. (2) Various connection parameters that serve to distinguish superblocks for sget(). (3) The volume FSID. (4) The security flavour. (5) The uniquifier length. (6) The uniquifier text. This is normally an empty string, unless the fsc=xyz mount option was used to explicitly specify a uniquifier. The key blob is of variable length, depending on the length of (6). The superblock object is given no coherency data to carry in the auxiliary data permitted by the cache. It is assumed that the superblock is always coherent. This patch also adds uniquification handling such that two otherwise identical superblocks, at least one of which is marked "nosharecache", won't end up trying to share the on-disk cache. It will be possible to manually provide a uniquifier through a mount option with a later patch to avoid the error otherwise produced. Signed-off-by: -
David Howells authored
Define and create server-level cache index objects (as managed by nfs_client structs). Each server object is created in the NFS top-level index object and is itself an index into which superblock-level objects are inserted. Ideally there would be one superblock-level object per server, and the former would be folded into the latter; however, since the "nosharecache" option exists this isn't possible. The server object key is a sequence consisting of: (1) NFS version (2) Server address family (eg: AF_INET or AF_INET6) (3) Server port. (4) Server IP address. The key blob is of variable length, depending on the length of (4). The server object is given no coherency data to carry in the auxiliary data permitted by the cache. Signed-off-by:
-
David Howells authored
Register NFS for caching and retrieve the top-level cache index object cookie. Signed-off-by:
-
David Howells authored
Permit local filesystem caching to be enabled for NFS in the kernel configuration. Signed-off-by:
-
David Howells authored
Add FS-Cache option bit to nfs_server struct. This is set to indicate local on-disk caching is enabled for a particular superblock. Also add debug bit for local caching operations. Signed-off-by:
-
David Howells authored
Add comment banners to some NFS functions so that they can be modified by the NFS fscache patches for further information. Signed-off-by:
-
David Howells authored
The attached patch makes the kAFS filesystem in fs/afs/ use FS-Cache, and through it any attached caches. The kAFS filesystem will use caching automatically if it's available. Signed-off-by:
-
David Howells authored
Add an FS-Cache cache-backend that permits a mounted filesystem to be used as a backing store for the cache. CacheFiles uses a userspace daemon to do some of the cache management - such as reaping stale nodes and culling. This is called cachefilesd and lives in /sbin. The source for the daemon can be downloaded from: http://people.redhat.com/~dhowells/cachefs/cachefilesd.c And an example configuration from: http://people.redhat.com/~dhowells/cachefs/cachefilesd.conf The filesystem and data integrity of the cache are only as good as those of the filesystem providing the backing services. Note that CacheFiles does not attempt to journal anything since the journalling interfaces of the various filesystems are very specific in nature. CacheFiles creates a misc character device - "/dev/cachefiles" - that is used to communication with the daemon. Only one thing may have this open at once, and whilst it is open, a cache is at least partially in existence. The daemon opens this and sends commands down it to control the cache. CacheFiles is currently limited to a single cache. CacheFiles attempts to maintain at least a certain percentage of free space on the filesystem, shrinking the cache by culling the objects it contains to make space if necessary - see the "Cache Culling" section. This means it can be placed on the same medium as a live set of data, and will expand to make use of spare space and automatically contract when the set of data requires more space. ============ REQUIREMENTS ============ The use of CacheFiles and its daemon requires the following features to be available in the system and in the cache filesystem: - dnotify. - extended attributes (xattrs). - openat() and friends. - bmap() support on files in the filesystem (FIBMAP ioctl). - The use of bmap() to detect a partial page at the end of the file. It is strongly recommended that the "dir_index" option is enabled on Ext3 filesystems being used as a cache. ============= CONFIGURATION ============= The cache is configured by a script in /etc/cachefilesd.conf. These commands set up cache ready for use. The following script commands are available: (*) brun <N>% (*) bcull <N>% (*) bstop <N>% (*) frun <N>% (*) fcull <N>% (*) fstop <N>% Configure the culling limits. Optional. See the section on culling The defaults are 7% (run), 5% (cull) and 1% (stop) respectively. The commands beginning with a 'b' are file space (block) limits, those beginning with an 'f' are file count limits. (*) dir <path> Specify the directory containing the root of the cache. Mandatory. (*) tag <name> Specify a tag to FS-Cache to use in distinguishing multiple caches. Optional. The default is "CacheFiles". (*) debug <mask> Specify a numeric bitmask to control debugging in the kernel module. Optional. The default is zero (all off). The following values can be OR'd into the mask to collect various information: 1 Turn on trace of function entry (_enter() macros) 2 Turn on trace of function exit (_leave() macros) 4 Turn on trace of internal debug points (_debug()) This mask can also be set through sysfs, eg: echo 5 >/sys/modules/cachefiles/parameters/debug ================== STARTING THE CACHE ================== The cache is started by running the daemon. The daemon opens the cache device, configures the cache and tells it to begin caching. At that point the cache binds to fscache and the cache becomes live. The daemon is run as follows: /sbin/cachefilesd [-d]* [-s] [-n] [-f <configfile>] The flags are: (*) -d Increase the debugging level. This can be specified multiple times and is cumulative with itself. (*) -s Send messages to stderr instead of syslog. (*) -n Don't daemonise and go into background. (*) -f <configfile> Use an alternative configuration file rather than the default one. =============== THINGS TO AVOID =============== Do not mount other things within the cache as this will cause problems. The kernel module contains its own very cut-down path walking facility that ignores mountpoints, but the daemon can't avoid them. Do not create, rename or unlink files and directories in the cache whilst the cache is active, as this may cause the state to become uncertain. Renaming files in the cache might make objects appear to be other objects (the filename is part of the lookup key). Do not change or remove the extended attributes attached to cache files by the cache as this will cause the cache state management to get confused. Do not create files or directories in the cache, lest the cache get confused or serve incorrect data. Do not chmod files in the cache. The module creates things with minimal permissions to prevent random users being able to access them directly. ============= CACHE CULLING ============= The cache may need culling occasionally to make space. This involves discarding objects from the cache that have been used less recently than anything else. Culling is based on the access time of data objects. Empty directories are culled if not in use. Cache culling is done on the basis of the percentage of blocks and the percentage of files available in the underlying filesystem. There are six "limits": (*) brun (*) frun If the amount of free space and the number of available files in the cache rises above both these limits, then culling is turned off. (*) bcull (*) fcull If the amount of available space or the number of available files in the cache falls below either of these limits, then culling is started. (*) bstop (*) fstop If the amount of available space or the number of available files in the cache falls below either of these limits, then no further allocation of disk space or files is permitted until culling has raised things above these limits again. These must be configured thusly: 0 <= bstop < bcull < brun < 100 0 <= fstop < fcull < frun < 100 Note that these are percentages of available space and available files, and do _not_ appear as 100 minus the percentage displayed by the "df" program. The userspace daemon scans the cache to build up a table of cullable objects. These are then culled in least recently used order. A new scan of the cache is started as soon as space is made in the table. Objects will be skipped if their atimes have changed or if the kernel module says it is still using them. =============== CACHE STRUCTURE =============== The CacheFiles module will create two directories in the directory it was given: (*) cache/ (*) graveyard/ The active cache objects all reside in the first directory. The CacheFiles kernel module moves any retired or culled objects that it can't simply unlink to the graveyard from which the daemon will actually delete them. The daemon uses dnotify to monitor the graveyard directory, and will delete anything that appears therein. The module represents index objects as directories with the filename "I..." or "J...". Note that the "cache/" directory is itself a special index. Data objects are represented as files if they have no children, or directories if they do. Their filenames all begin "D..." or "E...". If represented as a directory, data objects will have a file in the directory called "data" that actually holds the data. Special objects are similar to data objects, except their filenames begin "S..." or "T...". If an object has children, then it will be represented as a directory. Immediately in the representative directory are a collection of directories named for hash values of the child object keys with an '@' prepended. Into this directory, if possible, will be placed the representations of the child objects: INDEX INDEX INDEX DATA FILES ========= ========== ================================= ================ cache/@4a/I03nfs/@30/Ji000000000000000--fHg8hi8400 cache/@4a/I03nfs/@30/Ji000000000000000--fHg8hi8400/@75/Es0g000w...DB1ry cache/@4a/I03nfs/@30/Ji000000000000000--fHg8hi8400/@75/Es0g000w...N22ry cache/@4a/I03nfs/@30/Ji000000000000000--fHg8hi8400/@75/Es0g000w...FP1ry If the key is so long that it exceeds NAME_MAX with the decorations added on to it, then it will be cut into pieces, the first few of which will be used to make a nest of directories, and the last one of which will be the objects inside the last directory. The names of the intermediate directories will have '+' prepended: J1223/@23/+xy...z/+kl...m/Epqr Note that keys are raw data, and not only may they exceed NAME_MAX in size, they may also contain things like '/' and NUL characters, and so they may not be suitable for turning directly into a filename. To handle this, CacheFiles will use a suitably printable filename directly and "base-64" encode ones that aren't directly suitable. The two versions of object filenames indicate the encoding: OBJECT TYPE PRINTABLE ENCODED =============== =============== =============== Index "I..." "J..." Data "D..." "E..." Special "S..." "T..." Intermediate directories are always "@" or "+" as appropriate. Each object in the cache has an extended attribute label that holds the object type ID (required to distinguish special objects) and the auxiliary data from the netfs. The latter is used to detect stale objects in the cache and update or retire them. Note that CacheFiles will erase from the cache any file it doesn't recognise or any file of an incorrect type (such as a FIFO file or a device file). ========================== SECURITY MODEL AND SELINUX ========================== CacheFiles is implemented to deal properly with the LSM security features of the Linux kernel and the SELinux facility. One of the problems that CacheFiles faces is that it is generally acting on behalf of a process, and running in that process's context, and that includes a security context that is not appropriate for accessing the cache - either because the files in the cache are inaccessible to that process, or because if the process creates a file in the cache, that file may be inaccessible to other processes. The way CacheFiles works is to temporarily change the security context (fsuid, fsgid and actor security label) that the process acts as - without changing the security context of the process when it the target of an operation performed by some other process (so signalling and suchlike still work correctly). When the CacheFiles module is asked to bind to its cache, it: (1) Finds the security label attached to the root cache directory and uses that as the security label with which it will create files. By default, this is: cachefiles_var_t (2) Finds the security label of the process which issued the bind request (presumed to be the cachefilesd daemon), which by default will be: cachefilesd_t and asks LSM to supply a security ID as which it should act given the daemon's label. By default, this will be: cachefiles_kernel_t SELinux transitions the daemon's security ID to the module's security ID based on a rule of this form in the policy. type_transition <daemon's-ID> kernel_t : process <module's-ID>; For instance: type_transition cachefilesd_t kernel_t : process cachefiles_kernel_t; The module's security ID gives it permission to create, move and remove files and directories in the cache, to find and access directories and files in the cache, to set and access extended attributes on cache objects, and to read and write files in the cache. The daemon's security ID gives it only a very restricted set of permissions: it may scan directories, stat files and erase files and directories. It may not read or write files in the cache, and so it is precluded from accessing the data cached therein; nor is it permitted to create new files in the cache. There are policy source files available in: http://people.redhat.com/~dhowells/fscache/cachefilesd-0.8.tar.bz2 and later versions. In that tarball, see the files: cachefilesd.te cachefilesd.fc cachefilesd.if They are built and installed directly by the RPM. If a non-RPM based system is being used, then copy the above files to their own directory and run: make -f /usr/share/selinux/devel/Makefile semodule -i cachefilesd.pp You will need checkpolicy and selinux-policy-devel installed prior to the build. By default, the cache is located in /var/fscache, but if it is desirable that it should be elsewhere, than either the above policy files must be altered, or an auxiliary policy must be installed to label the alternate location of the cache. For instructions on how to add an auxiliary policy to enable the cache to be located elsewhere when SELinux is in enforcing mode, please see: /usr/share/doc/cachefilesd-*/move-cache.txt When the cachefilesd rpm is installed; alternatively, the document can be found in the sources. ================== A NOTE ON SECURITY ================== CacheFiles makes use of the split security in the task_struct. It allocates its own task_security structure, and redirects current->act_as to point to it when it acts on behalf of another process, in that process's context. The reason it does this is that it calls vfs_mkdir() and suchlike rather than bypassing security and calling inode ops directly. Therefore the VFS and LSM may deny the CacheFiles access to the cache data because under some circumstances the caching code is running in the security context of whatever process issued the original syscall on the netfs. Furthermore, should CacheFiles create a file or directory, the security parameters with that object is created (UID, GID, security label) would be derived from that process that issued the system call, thus potentially preventing other processes from accessing the cache - including CacheFiles's cache management daemon (cachefilesd). What is required is to temporarily override the security of the process that issued the system call. We can't, however, just do an in-place change of the security data as that affects the process as an object, not just as a subject. This means it may lose signals or ptrace events for example, and affects what the process looks like in /proc. So CacheFiles makes use of a logical split in the security between the objective security (task->sec) and the subjective security (task->act_as). The objective security holds the intrinsic security properties of a process and is never overridden. This is what appears in /proc, and is what is used when a process is the target of an operation by some other process (SIGKILL for example). The subjective security holds the active security properties of a process, and may be overridden. This is not seen externally, and is used whan a process acts upon another object, for example SIGKILLing another process or opening a file. LSM hooks exist that allow SELinux (or Smack or whatever) to reject a request for CacheFiles to run in a context of a specific security label, or to create files and directories with another security label. This documentation is added by the patch to: Documentation/filesystems/caching/cachefiles.txt Signed-Off-By:
-
David Howells authored
Export a number of functions for CacheFiles's use. Signed-off-by:
Rik van Riel <riel@redhat.com> Acked-by:
-
David Howells authored
Add a function to install a monitor on the page lock waitqueue for a particular page, thus allowing the page being unlocked to be detected. This is used by CacheFiles to detect read completion on a page in the backing filesystem so that it can then copy the data to the waiting netfs page. Signed-off-by:
-
David Howells authored
Implement the data I/O part of the FS-Cache netfs API. The documentation and API header file were added in a previous patch. This patch implements the following functions for the netfs to call: (*) fscache_attr_changed(). Indicate that the object has changed its attributes. The only attribute currently recorded is the file size. Only pages within the set file size will be stored in the cache. This operation is submitted for asynchronous processing, and will return immediately. It will return -ENOMEM if an out of memory error is encountered, -ENOBUFS if the object is not actually cached, or 0 if the operation is successfully queued. (*) fscache_read_or_alloc_page(). (*) fscache_read_or_alloc_pages(). Request data be fetched from the disk, and allocate internal metadata to track the netfs pages and reserve disk space for unknown pages. These operations perform semi-asynchronous data reads. Upon returning they will indicate which pages they think can be retrieved from disk, and will have set in progress attempts to retrieve those pages. These will return, in order of preference, -ENOMEM on memory allocation error, -ERESTARTSYS if a signal interrupted proceedings, -ENODATA if one or more requested pages are not yet cached, -ENOBUFS if the object is not actually cached or if there isn't space for future pages to be cached on this object, or 0 if successful. In the case of the multipage function, the pages for which reads are set in progress will be removed from the list and the page count decreased appropriately. If any read operations should fail, the completion function will be given an error, and will also be passed contextual information to allow the netfs to fall back to querying the server for the absent pages. For each successful read, the page completion function will also be called. Any pages subsequently tracked by the cache will have PG_fscache set upon them on return. fscache_uncache_page() must be called for such pages. If supplied by the netfs, the mark_pages_cached() cookie op will be invoked for any pages now tracked. (*) fscache_alloc_page(). Allocate internal metadata to track a netfs page and reserve disk space. This will return -ENOMEM on memory allocation error, -ERESTARTSYS on signal, -ENOBUFS if the object isn't cached, or there isn't enough space in the cache, or 0 if successful. Any pages subsequently tracked by the cache will have PG_fscache set upon them on return. fscache_uncache_page() must be called for such pages. If supplied by the netfs, the mark_pages_cached() cookie op will be invoked for any pages now tracked. (*) fscache_write_page(). Request data be stored to disk. This may only be called on pages that have been read or alloc'd by the above three functions and have not yet been uncached. This will return -ENOMEM on memory allocation error, -ERESTARTSYS on signal, -ENOBUFS if the object isn't cached, or there isn't immediately enough space in the cache, or 0 if successful. On a successful return, this operation will have queued the page for asynchronous writing to the cache. The page will be returned with PG_fscache_write set until the write completes one way or another. The caller will not be notified if the write fails due to an I/O error. If that happens, the object will become available and all pending writes will be aborted. Note that the cache may batch up page writes, and so it may take a while to get around to writing them out. The caller must assume that until PG_fscache_write is cleared the page is use by the cache. Any changes made to the page may be reflected on disk. The page may even be under DMA. (*) fscache_uncache_page(). Indicate that the cache should stop tracking a page previously read or alloc'd from the cache. If the page was alloc'd only, but unwritten, it will not appear on disk. Signed-off-by: -
David Howells authored
Add and document asynchronous operation handling for use by FS-Cache's data storage and retrieval routines. The following documentation is added to: Documentation/filesystems/caching/operations.txt ================================ ASYNCHRONOUS OPERATIONS HANDLING ================================ ======== OVERVIEW ======== FS-Cache has an asynchronous operations handling facility that it uses for its data storage and retrieval routines. Its operations are represented by fscache_operation structs, though these are usually embedded into some other structure. This facility is available to and expected to be be used by the cache backends, and FS-Cache will create operations and pass them off to the appropriate cache backend for completion. To make use of this facility, <linux/fscache-cache.h> should be #included. =============================== OPERATION RECORD INITIALISATION =============================== An operation is recorded in an fscache_operation struct: struct fscache_operation { union { struct work_struct fast_work; struct slow_work slow_work; }; unsigned long flags; fscache_operation_processor_t processor; ... }; Someone wanting to issue an operation should allocate something with this struct embedded in it. They should initialise it by calling: void fscache_operation_init(struct fscache_operation *op, fscache_operation_release_t release); with the operation to be initialised and the release function to use. The op->flags parameter should be set to indicate the CPU time provision and the exclusivity (see the Parameters section). The op->fast_work, op->slow_work and op->processor flags should be set as appropriate for the CPU time provision (see the Parameters section). FSCACHE_OP_WAITING may be set in op->flags prior to each submission of the operation and waited for afterwards. ========== PARAMETERS ========== There are a number of parameters that can be set in the operation record's flag parameter. There are three options for the provision of CPU time in these operations: (1) The operation may be done synchronously (FSCACHE_OP_MYTHREAD). A thread may decide it wants to handle an operation itself without deferring it to another thread. This is, for example, used in read operations for calling readpages() on the backing filesystem in CacheFiles. Although readpages() does an asynchronous data fetch, the determination of whether pages exist is done synchronously - and the netfs does not proceed until this has been determined. If this option is to be used, FSCACHE_OP_WAITING must be set in op->flags before submitting the operation, and the operating thread must wait for it to be cleared before proceeding: wait_on_bit(&op->flags, FSCACHE_OP_WAITING, fscache_wait_bit, TASK_UNINTERRUPTIBLE); (2) The operation may be fast asynchronous (FSCACHE_OP_FAST), in which case it will be given to keventd to process. Such an operation is not permitted to sleep on I/O. This is, for example, used by CacheFiles to copy data from a backing fs page to a netfs page after the backing fs has read the page in. If this option is used, op->fast_work and op->processor must be initialised before submitting the operation: INIT_WORK(&op->fast_work, do_some_work); (3) The operation may be slow asynchronous (FSCACHE_OP_SLOW), in which case it will be given to the slow work facility to process. Such an operation is permitted to sleep on I/O. This is, for example, used by FS-Cache to handle background writes of pages that have just been fetched from a remote server. If this option is used, op->slow_work and op->processor must be initialised before submitting the operation: fscache_operation_init_slow(op, processor) Furthermore, operations may be one of two types: (1) Exclusive (FSCACHE_OP_EXCLUSIVE). Operations of this type may not run in conjunction with any other operation on the object being operated upon. An example of this is the attribute change operation, in which the file being written to may need truncation. (2) Shareable. Operations of this type may be running simultaneously. It's up to the operation implementation to prevent interference between other operations running at the same time. ========= PROCEDURE ========= Operations are used through the following procedure: (1) The submitting thread must allocate the operation and initialise it itself. Normally this would be part of a more specific structure with the generic op embedded within. (2) The submitting thread must then submit the operation for processing using one of the following two functions: int fscache_submit_op(struct fscache_object *object, struct fscache_operation *op); int fscache_submit_exclusive_op(struct fscache_object *object, struct fscache_operation *op); The first function should be used to submit non-exclusive ops and the second to submit exclusive ones. The caller must still set the FSCACHE_OP_EXCLUSIVE flag. If successful, both functions will assign the operation to the specified object and return 0. -ENOBUFS will be returned if the object specified is permanently unavailable. The operation manager will defer operations on an object that is still undergoing lookup or creation. The operation will also be deferred if an operation of conflicting exclusivity is in progress on the object. If the operation is asynchronous, the manager will retain a reference to it, so the caller should put their reference to it by passing it to: void fscache_put_operation(struct fscache_operation *op); (3) If the submitting thread wants to do the work itself, and has marked the operation with FSCACHE_OP_MYTHREAD, then it should monitor FSCACHE_OP_WAITING as described above and check the state of the object if necessary (the object might have died whilst the thread was waiting). When it has finished doing its processing, it should call fscache_put_operation() on it. (4) The operation holds an effective lock upon the object, preventing other exclusive ops conflicting until it is released. The operation can be enqueued for further immediate asynchronous processing by adjusting the CPU time provisioning option if necessary, eg: op->flags &= ~FSCACHE_OP_TYPE; op->flags |= ~FSCACHE_OP_FAST; and calling: void fscache_enqueue_operation(struct fscache_operation *op) This can be used to allow other things to have use of the worker thread pools. ===================== ASYNCHRONOUS CALLBACK ===================== When used in asynchronous mode, the worker thread pool will invoke the processor method with a pointer to the operation. This should then get at the container struct by using container_of(): static void fscache_write_op(struct fscache_operation *_op) { struct fscache_storage *op = container_of(_op, struct fscache_storage, op); ... } The caller holds a reference on the operation, and will invoke fscache_put_operation() when the processor function returns. The processor function is at liberty to call fscache_enqueue_operation() or to take extra references. Signed-off-by: -
David Howells authored
Implement the cookie management part of the FS-Cache netfs client API. The documentation and API header file were added in a previous patch. This patch implements the following three functions: (1) fscache_acquire_cookie(). Acquire a cookie to represent an object to the netfs. If the object in question is a non-index object, then that object and its parent indices will be created on disk at this point if they don't already exist. Index creation is deferred because an index may reside in multiple caches. (2) fscache_relinquish_cookie(). Retire or release a cookie previously acquired. At this point, the object on disk may be destroyed. (3) fscache_update_cookie(). Update the in-cache representation of a cookie. This is used to update the auxiliary data for coherency management purposes. With this patch it is possible to have a netfs instruct a cache backend to look up, validate and create metadata on disk and to destroy it again. The ability to actually store and retrieve data in the objects so created is added in later patches. Note that these functions will never return an error. _All_ errors are handled internally to FS-Cache. The worst that can happen is that fscache_acquire_cookie() may return a NULL pointer - which is considered a negative cookie pointer and can be passed back to any function that takes a cookie without harm. A negative cookie pointer merely suppresses caching at that level. The stub in linux/fscache.h will detect inline the negative cookie pointer and abort the operation as fast as possible. This means that the compiler doesn't have to set up for a call in that case. See the documentation in Documentation/filesystems/caching/netfs-api.txt for more information. Signed-off-by: -
David Howells authored
Implement the cache object management state machine. The following documentation is added to illuminate the working of this state machine. It will also be added as: Documentation/filesystems/caching/object.txt ==================================================== IN-KERNEL CACHE OBJECT REPRESENTATION AND MANAGEMENT ==================================================== ============== REPRESENTATION ============== FS-Cache maintains an in-kernel representation of each object that a netfs is currently interested in. Such objects are represented by the fscache_cookie struct and are referred to as cookies. FS-Cache also maintains a separate in-kernel representation of the objects that a cache backend is currently actively caching. Such objects are represented by the fscache_object struct. The cache backends allocate these upon request, and are expected to embed them in their own representations. These are referred to as objects. There is a 1:N relationship between cookies and objects. A cookie may be represented by multiple objects - an index may exist in more than one cache - or even by no objects (it may not be cached). Furthermore, both cookies and objects are hierarchical. The two hierarchies correspond, but the cookies tree is a superset of the union of the object trees of multiple caches: NETFS INDEX TREE : CACHE 1 : CACHE 2 : : : +-----------+ : +----------->| IObject | : +-----------+ | : +-----------+ : | ICookie |-------+ : | : +-----------+ | : | : +-----------+ | +------------------------------>| IObject | | : | : +-----------+ | : V : | | : +-----------+ : | V +----------->| IObject | : | +-----------+ | : +-----------+ : | | ICookie |-------+ : | : V +-----------+ | : | : +-----------+ | +------------------------------>| IObject | +-----+-----+ : | : +-----------+ | | : | : | V | : V : | +-----------+ | : +-----------+ : | | ICookie |------------------------->| IObject | : | +-----------+ | : +-----------+ : | | V : | : V | +-----------+ : | : +-----------+ | | ICookie |-------------------------------->| IObject | | +-----------+ : | : +-----------+ V | : V : | +-----------+ | : +-----------+ : | | DCookie |------------------------->| DObject | : | +-----------+ | : +-----------+ : | | : : | +-------+-------+ : : | | | : : | V V : : V +-----------+ +-----------+ : : +-----------+ | DCookie | | DCookie |------------------------>| DObject | +-----------+ +-----------+ : : +-----------+ : : In the above illustration, ICookie and IObject represent indices and DCookie and DObject represent data storage objects. Indices may have representation in multiple caches, but currently, non-index objects may not. Objects of any type may also be entirely unrepresented. As far as the netfs API goes, the netfs is only actually permitted to see pointers to the cookies. The cookies themselves and any objects attached to those cookies are hidden from it. =============================== OBJECT MANAGEMENT STATE MACHINE =============================== Within FS-Cache, each active object is managed by its own individual state machine. The state for an object is kept in the fscache_object struct, in object->state. A cookie may point to a set of objects that are in different states. Each state has an action associated with it that is invoked when the machine wakes up in that state. There are four logical sets of states: (1) Preparation: states that wait for the parent objects to become ready. The representations are hierarchical, and it is expected that an object must be created or accessed with respect to its parent object. (2) Initialisation: states that perform lookups in the cache and validate what's found and that create on disk any missing metadata. (3) Normal running: states that allow netfs operations on objects to proceed and that update the state of objects. (4) Termination: states that detach objects from their netfs cookies, that delete objects from disk, that handle disk and system errors and that free up in-memory resources. In most cases, transitioning between states is in response to signalled events. When a state has finished processing, it will usually set the mask of events in which it is interested (object->event_mask) and relinquish the worker thread. Then when an event is raised (by calling fscache_raise_event()), if the event is not masked, the object will be queued for processing (by calling fscache_enqueue_object()). PROVISION OF CPU TIME --------------------- The work to be done by the various states is given CPU time by the threads of the slow work facility (see Documentation/slow-work.txt). This is used in preference to the workqueue facility because: (1) Threads may be completely occupied for very long periods of time by a particular work item. These state actions may be doing sequences of synchronous, journalled disk accesses (lookup, mkdir, create, setxattr, getxattr, truncate, unlink, rmdir, rename). (2) Threads may do little actual work, but may rather spend a lot of time sleeping on I/O. This means that single-threaded and 1-per-CPU-threaded workqueues don't necessarily have the right numbers of threads. LOCKING SIMPLIFICATION ---------------------- Because only one worker thread may be operating on any particular object's state machine at once, this simplifies the locking, particularly with respect to disconnecting the netfs's representation of a cache object (fscache_cookie) from the cache backend's representation (fscache_object) - which may be requested from either end. ================= THE SET OF STATES ================= The object state machine has a set of states that it can be in. There are preparation states in which the object sets itself up and waits for its parent object to transit to a state that allows access to its children: (1) State FSCACHE_OBJECT_INIT. Initialise the object and wait for the parent object to become active. In the cache, it is expected that it will not be possible to look an object up from the parent object, until that parent object itself has been looked up. There are initialisation states in which the object sets itself up and accesses disk for the object metadata: (2) State FSCACHE_OBJECT_LOOKING_UP. Look up the object on disk, using the parent as a starting point. FS-Cache expects the cache backend to probe the cache to see whether this object is represented there, and if it is, to see if it's valid (coherency management). The cache should call fscache_object_lookup_negative() to indicate lookup failure for whatever reason, and should call fscache_obtained_object() to indicate success. At the completion of lookup, FS-Cache will let the netfs go ahead with read operations, no matter whether the file is yet cached. If not yet cached, read operations will be immediately rejected with ENODATA until the first known page is uncached - as to that point there can be no data to be read out of the cache for that file that isn't currently also held in the pagecache. (3) State FSCACHE_OBJECT_CREATING. Create an object on disk, using the parent as a starting point. This happens if the lookup failed to find the object, or if the object's coherency data indicated what's on disk is out of date. In this state, FS-Cache expects the cache to create The cache should call fscache_obtained_object() if creation completes successfully, fscache_object_lookup_negative() otherwise. At the completion of creation, FS-Cache will start processing write operations the netfs has queued for an object. If creation failed, the write ops will be transparently discarded, and nothing recorded in the cache. There are some normal running states in which the object spends its time servicing netfs requests: (4) State FSCACHE_OBJECT_AVAILABLE. A transient state in which pending operations are started, child objects are permitted to advance from FSCACHE_OBJECT_INIT state, and temporary lookup data is freed. (5) State FSCACHE_OBJECT_ACTIVE. The normal running state. In this state, requests the netfs makes will be passed on to the cache. (6) State FSCACHE_OBJECT_UPDATING. The state machine comes here to update the object in the cache from the netfs's records. This involves updating the auxiliary data that is used to maintain coherency. And there are terminal states in which an object cleans itself up, deallocates memory and potentially deletes stuff from disk: (7) State FSCACHE_OBJECT_LC_DYING. The object comes here if it is dying because of a lookup or creation error. This would be due to a disk error or system error of some sort. Temporary data is cleaned up, and the parent is released. (8) State FSCACHE_OBJECT_DYING. The object comes here if it is dying due to an error, because its parent cookie has been relinquished by the netfs or because the cache is being withdrawn. Any child objects waiting on this one are given CPU time so that they too can destroy themselves. This object waits for all its children to go away before advancing to the next state. (9) State FSCACHE_OBJECT_ABORT_INIT. The object comes to this state if it was waiting on its parent in FSCACHE_OBJECT_INIT, but its parent died. The object will destroy itself so that the parent may proceed from the FSCACHE_OBJECT_DYING state. (10) State FSCACHE_OBJECT_RELEASING. (11) State FSCACHE_OBJECT_RECYCLING. The object comes to one of these two states when dying once it is rid of all its children, if it is dying because the netfs relinquished its cookie. In the first state, the cached data is expected to persist, and in the second it will be deleted. (12) State FSCACHE_OBJECT_WITHDRAWING. The object transits to this state if the cache decides it wants to withdraw the object from service, perhaps to make space, but also due to error or just because the whole cache is being withdrawn. (13) State FSCACHE_OBJECT_DEAD. The object transits to this state when the in-memory object record is ready to be deleted. The object processor shouldn't ever see an object in this state. THE SET OF EVENTS ----------------- There are a number of events that can be raised to an object state machine: (*) FSCACHE_OBJECT_EV_UPDATE The netfs requested that an object be updated. The state machine will ask the cache backend to update the object, and the cache backend will ask the netfs for details of the change through its cookie definition ops. (*) FSCACHE_OBJECT_EV_CLEARED This is signalled in two circumstances: (a) when an object's last child object is dropped and (b) when the last operation outstanding on an object is completed. This is used to proceed from the dying state. (*) FSCACHE_OBJECT_EV_ERROR This is signalled when an I/O error occurs during the processing of some object. (*) FSCACHE_OBJECT_EV_RELEASE (*) FSCACHE_OBJECT_EV_RETIRE These are signalled when the netfs relinquishes a cookie it was using. The event selected depends on whether the netfs asks for the backing object to be retired (deleted) or retained. (*) FSCACHE_OBJECT_EV_WITHDRAW This is signalled when the cache backend wants to withdraw an object. This means that the object will have to be detached from the netfs's cookie. Because the withdrawing releasing/retiring events are all handled by the object state machine, it doesn't matter if there's a collision with both ends trying to sever the connection at the same time. The state machine can just pick which one it wants to honour, and that effects the other. Signed-off-by: -
David Howells authored
Add helpers for use with wait_on_bit(). Signed-off-by:
-
David Howells authored
Add functions to register and unregister a network filesystem or other client of the FS-Cache service. This allocates and releases the cookie representing the top-level index for a netfs, and makes it available to the netfs. If the FS-Cache facility is disabled, then the calls are optimised away at compile time. Note that whilst this patch may appear to work with FS-Cache enabled and a netfs attempting to use it, it will leak the cookie it allocates for the netfs as fscache_relinquish_cookie() is implemented in a later patch. This will cause the slab code to emit a warning when the module is removed. Signed-off-by:
-
David Howells authored
Provide a slab from which can be allocated the FS-Cache cookies that will be presented to the netfs. Also provide a slab constructor and a function to recursively discard a cookie and its ancestor chain. Signed-off-by:
-
David Howells authored
Implement the entry points by which a cache backend may initialise, add, declare an error upon and withdraw a cache. Further, an object is created in sysfs under which each cache added will get an object created: /sys/fs/fscache/<cachetag>/ All of this is described in Documentation/filesystems/caching/backend-api.txt added by a previous patch. Signed-off-by:
-
David Howells authored
Implement two features of FS-Cache: (1) The ability to request and release cache tags - names by which a cache may be known to a netfs, and thus selected for use. (2) An internal function by which a cache is selected by consulting the netfs, if the netfs wishes to be consulted. Signed-off-by: -
David Howells authored
Add a description of the root index of the cache for later patches to make use of. The root index is owned by FS-Cache itself. When a netfs requests caching facilities, FS-Cache will, if one doesn't already exist, create an entry in the root index with the key being the name of the netfs ("AFS" for example), and the auxiliary data holding the index structure version supplied by the netfs: FSDEF | +-----------+ | | NFS AFS [v=1] [v=1] If an entry with the appropriate name does already exist, the version is compared. If the version is different, the entire subtree from that entry will be discarded and a new entry created. The new entry will be an index, and a cookie referring to it will be passed to the netfs. This is then the root handle by which the netfs accesses the cache. It can create whatever objects it likes in that index, including further indices. Signed-off-by: -
David Howells authored
Make FS-Cache create its /proc interface and present various statistical information through it. Also provide the functions for updating this information. These features are enabled by: CONFIG_FSCACHE_PROC CONFIG_FSCACHE_STATS CONFIG_FSCACHE_HISTOGRAM The /proc directory for FS-Cache is also exported so that caching modules can add their own statistics there too. The FS-Cache module is loadable at this point, and the statistics files can be examined by userspace: cat /proc/fs/fscache/stats cat /proc/fs/fscache/histogram Signed-off-by:
-
David Howells authored
Add the main configuration option, allowing FS-Cache to be selected; the module entry and exit functions and the debugging stuff used by these patches. The two configuration options added are: CONFIG_FSCACHE CONFIG_FSCACHE_DEBUG The first enables the facility, and the second makes the debugging statements enableable through the "debug" module parameter. The value of this parameter is a bitmask as described in: Documentation/filesystems/caching/fscache.txt The module can be loaded at this point, but all it will do at this point in the patch series is to start up the slow work facility and shut it down again. Signed-off-by:
-
David Howells authored
Add the API for a generic facility (FS-Cache) by which caches may declare them selves open for business, and may obtain work to be done from network filesystems. The header file is included by: #include <linux/fscache-cache.h> Documentation for the API is also added to: Documentation/filesystems/caching/backend-api.txt This API is not usable without the implementation of the utility functions which will be added in further patches. Signed-off-by:
-
David Howells authored
Add the API for a generic facility (FS-Cache) by which filesystems (such as AFS or NFS) may call on local caching capabilities without having to know anything about how the cache works, or even if there is a cache: +---------+ | | +--------------+ | NFS |--+ | | | | | +-->| CacheFS | +---------+ | +----------+ | | /dev/hda5 | | | | | +--------------+ +---------+ +-->| | | | | | |--+ | AFS |----->| FS-Cache | | | | |--+ +---------+ +-->| | | | | | | +--------------+ +---------+ | +----------+ | | | | | | +-->| CacheFiles | | ISOFS |--+ | /var/cache | | | +--------------+ +---------+ General documentation and documentation of the netfs specific API are provided in addition to the header files. As this patch stands, it is possible to build a filesystem against the facility and attempt to use it. All that will happen is that all requests will be immediately denied as if no cache is present. Further patches will implement the core of the facility. The facility will transfer requests from networking filesystems to appropriate caches if possible, or else gracefully deny them. If this facility is disabled in the kernel configuration, then all its operations will trivially reduce to nothing during compilation. WHY NOT I_MAPPING? ================== I have added my own API to implement caching rather than using i_mapping to do this for a number of reasons. These have been discussed a lot on the LKML and CacheFS mailing lists, but to summarise the basics: (1) Most filesystems don't do hole reportage. Holes in files are treated as blocks of zeros and can't be distinguished otherwise, making it difficult to distinguish blocks that have been read from the network and cached from those that haven't. (2) The backing inode must be fully populated before being exposed to userspace through the main inode because the VM/VFS goes directly to the backing inode and does not interrogate the front inode's VM ops. Therefore: (a) The backing inode must fit entirely within the cache. (b) All backed files currently open must fit entirely within the cache at the same time. (c) A working set of files in total larger than the cache may not be cached. (d) A file may not grow larger than the available space in the cache. (e) A file that's open and cached, and remotely grows larger than the cache is potentially stuffed. (3) Writes go to the backing filesystem, and can only be transferred to the network when the file is closed. (4) There's no record of what changes have been made, so the whole file must be written back. (5) The pages belong to the backing filesystem, and all metadata associated with that page are relevant only to the backing filesystem, and not anything stacked atop it. OVERVIEW ======== FS-Cache provides (or will provide) the following facilities: (1) Caches can be added / removed at any time, even whilst in use. (2) Adds a facility by which tags can be used to refer to caches, even if they're not available yet. (3) More than one cache can be used at once. Caches can be selected explicitly by use of tags. (4) The netfs is provided with an interface that allows either party to withdraw caching facilities from a file (required for (1)). (5) A netfs may annotate cache objects that belongs to it. This permits the storage of coherency maintenance data. (6) Cache objects will be pinnable and space reservations will be possible. (7) The interface to the netfs returns as few errors as possible, preferring rather to let the netfs remain oblivious. (8) Cookies are used to represent indices, files and other objects to the netfs. The simplest cookie is just a NULL pointer - indicating nothing cached there. (9) The netfs is allowed to propose - dynamically - any index hierarchy it desires, though it must be aware that the index search function is recursive, stack space is limited, and indices can only be children of indices. (10) Indices can be used to group files together to reduce key size and to make group invalidation easier. The use of indices may make lookup quicker, but that's cache dependent. (11) Data I/O is effectively done directly to and from the netfs's pages. The netfs indicates that page A is at index B of the data-file represented by cookie C, and that it should be read or written. The cache backend may or may not start I/O on that page, but if it does, a netfs callback will be invoked to indicate completion. The I/O may be either synchronous or asynchronous. (12) Cookies can be "retired" upon release. At this point FS-Cache will mark them as obsolete and the index hierarchy rooted at that point will get recycled. (13) The netfs provides a "match" function for index searches. In addition to saying whether a match was made or not, this can also specify that an entry should be updated or deleted. FS-Cache maintains a virtual index tree in which all indices, files, objects and pages are kept. Bits of this tree may actually reside in one or more caches. FSDEF | +------------------------------------+ | | NFS AFS | | +--------------------------+ +-----------+ | | | | homedir mirror afs.org redhat.com | | | +------------+ +---------------+ +----------+ | | | | | | 00001 00002 00007 00125 vol00001 vol00002 | | | | | +---+---+ +-----+ +---+ +------+------+ +-----+----+ | | | | | | | | | | | | | PG0 PG1 PG2 PG0 XATTR PG0 PG1 DIRENT DIRENT DIRENT R/W R/O Bak | | PG0 +-------+ | | 00001 00003 | +---+---+ | | | PG0 PG1 PG2 In the example above, two netfs's can be seen to be backed: NFS and AFS. These have different index hierarchies: (*) The NFS primary index will probably contain per-server indices. Each server index is indexed by NFS file handles to get data file objects. Each data file objects can have an array of pages, but may also have further child objects, such as extended attributes and directory entries. Extended attribute objects themselves have page-array contents. (*) The AFS primary index contains per-cell indices. Each cell index contains per-logical-volume indices. Each of volume index contains up to three indices for the read-write, read-only and backup mirrors of those volumes. Each of these contains vnode data file objects, each of which contains an array of pages. The very top index is the FS-Cache master index in which individual netfs's have entries. Any index object may reside in more than one cache, provided it only has index children. Any index with non-index object children will be assumed to only reside in one cache. The FS-Cache overview can be found in: Documentation/filesystems/caching/fscache.txt The netfs API to FS-Cache can be found in: Documentation/filesystems/caching/netfs-api.txt Signed-off-by: -
David Howells authored
Recruit a page flag to aid in cache management. The following extra flag is defined: (1) PG_fscache (PG_private_2) The marked page is backed by a local cache and is pinning resources in the cache driver. If PG_fscache is set, then things that checked for PG_private will now also check for that. This includes things like truncation and page invalidation. The function page_has_private() had been added to make the checks for both PG_private and PG_private_2 at the same time. Signed-off-by: -
David Howells authored
The attached patch causes read_cache_pages() to release page-private data on a page for which add_to_page_cache() fails. If the filler function fails, then the problematic page is left attached to the pagecache (with appropriate flags set, one presumes) and the remaining to-be-attached pages are invalidated and discarded. This permits pages with caching references associated with them to be cleaned up. The invalidatepage() address space op is called (indirectly) to do the honours. Signed-off-by:
-
David Howells authored
Document the slow work thread pool. Signed-off-by:
-
David Howells authored
Make the slow work pool configurable through /proc/sys/kernel/slow-work. (*) /proc/sys/kernel/slow-work/min-threads The minimum number of threads that should be in the pool as long as it is in use. This may be anywhere between 2 and max-threads. (*) /proc/sys/kernel/slow-work/max-threads The maximum number of threads that should in the pool. This may be anywhere between min-threads and 255 or NR_CPUS * 2, whichever is greater. (*) /proc/sys/kernel/slow-work/vslow-percentage The percentage of active threads in the pool that may be used to execute very slow work items. This may be between 1 and 99. The resultant number is bounded to between 1 and one fewer than the number of active threads. This ensures there is always at least one thread that can process very slow work items, and always at least one thread that won't. Signed-off-by:Serge Hallyn <serue@us.ibm.com> Acked-by:
-
David Howells authored
Make the slow-work thread pool actually dynamic in the number of threads it contains. With this patch, it will both create additional threads when it has extra work to do, and cull excess threads that aren't doing anything. Signed-off-by:
-
David Howells authored
Create a dynamically sized pool of threads for doing very slow work items, such as invoking mkdir() or rmdir() - things that may take a long time and may sleep, holding mutexes/semaphores and hogging a thread, and are thus unsuitable for workqueues. The number of threads is always at least a settable minimum, but more are started when there's more work to do, up to a limit. Because of the nature of the load, it's not suitable for a 1-thread-per-CPU type pool. A system with one CPU may well want several threads. This is used by FS-Cache to do slow caching operations in the background, such as looking up, creating or deleting cache objects. Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6Linus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6: Remove two unneeded exports and make two symbols static in fs/mpage.c Cleanup after commit 585d3bc0 Trim includes of fdtable.h Don't crap into descriptor table in binfmt_som Trim includes in binfmt_elf Don't mess with descriptor table in load_elf_binary() Get rid of indirect include of fs_struct.h New helper - current_umask() check_unsafe_exec() doesn't care about signal handlers sharing New locking/refcounting for fs_struct Take fs_struct handling to new file (fs/fs_struct.c) Get rid of bumping fs_struct refcount in pivot_root(2) Kill unsharing fs_struct in __set_personality()
-
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6Linus Torvalds authored
* 'drm-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: (21 commits) drm/radeon: load the right microcode on rs780 drm: remove unused "can_grow" parameter from drm_crtc_helper_initial_config drm: fix EDID backward compat check drm: sync the mode validation for INTERLACE/DBLSCAN drm: fix typo in edid vendor parsing. DRM: drm_crtc_helper.h doesn't actually need i2c.h drm: fix missing inline function on 32-bit powerpc. drm: Use pgprot_writecombine in GEM GTT mapping to get the right bits for !PAT. drm/i915: Add a spinlock to protect the active_list drm/i915: Fix SDVO TV support drm/i915: Fix SDVO CREATE_PREFERRED_INPUT_TIMING command drm/i915: Fix error in SDVO DTD and modeline convert drm/i915: Fix SDVO command debug function drm/i915: fix TV mode setting in property change drm/i915: only set TV mode when any property changed drm/i915: clean up udelay usage drm/i915: add VGA hotplug support for 945+ drm/i915: correctly set IGD device's gtt size for KMS. drm/i915: avoid hanging on to a stale pointer to raw_edid. drm/i915: check for -EINVAL from vm_insert_pfn ...
-
