- 05 Oct, 2018 18 commits
-
-
Mauro Carvalho Chehab authored
As pointed at: https://bugzilla.kernel.org/show_bug.cgi?id=199323 This patch causes a bad effect on RPi. I suspect that the root cause is at the USB out of tree RPi driver, with uses high priority interrupts instead of normal ones. Anyway, as this patch is mostly a cleanup, better to revert it. This reverts commit 7d95fb74. Cc: stable@vger.kernel.org # For Kernel 4.18 Signed-off-by:
Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
-
Hugues Fruchet authored
Changing framerate right before streamon had no effect, the new framerate value was taken into account only at next streamon, fix this. Signed-off-by:
Hugues Fruchet <hugues.fruchet@st.com> Signed-off-by:
Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by:
-
Lubomir Rintel authored
When the "xclk" clock was added, it was made mandatory. This broke the driver on an OLPC plaform which doesn't know such clock. Make it optional. Tested on a OLPC XO-1 laptop. Fixes: 0a024d63 ("[media] ov7670: get xclk") Cc: stable@vger.kernel.org # 4.11+ Signed-off-by:
Lubomir Rintel <lkundrak@v3.sk> Signed-off-by:
-
Arnd Bergmann authored
The regmap change causes multiple warnings like drivers/media/i2c/ov9650.c: In function 'ov965x_g_volatile_ctrl': drivers/media/i2c/ov9650.c:889:29: error: 'reg2' may be used uninitialized in this function [-Werror=maybe-uninitialized] exposure = ((reg2 & 0x3f) << 10) | (reg1 << 2) | ~~~~~~~~~~~~~~~^~~~~~ It is apparently hard for the compiler to see here if ov965x_read() returned successfully or not. Besides, we have a v4l2_dbg() statement that prints an uninitialized value if regmap_read() fails. Adding an 'else' clause avoids the ambiguity. Fixes: 361f3803 ("media: ov9650: use SCCB regmap") Signed-off-by:Arnd Bergmann <arnd@arndb.de> Reviewed-by:
Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by:
-
Mauro Carvalho Chehab authored
Function alignments are off by 1 space, as reported by checkpatch.pl --strict. Fix those. Acked-by:
-
Bingbu Cao authored
Add a v4l2 sub-device driver for the Sony imx355 image sensor. This is a camera sensor using the i2c bus for control and the csi-2 bus for data. This driver supports following features: - manual exposure and analog/digital gain control support - vblank/hblank control support - 4 test patterns control support - vflip/hflip control support (will impact the output bayer order) - support following resolutions: - 3268x2448, 3264x2448, 3280x2464 @ 30fps - 1940x1096, 1936x1096, 1924x1080, 1920x1080 @ 60fps - 1640x1232, 1640x922, 1300x736, 1296x736, 1284x720, 1280x720 820x616 @ 120fps - support 4 bayer orders output (via change v/hflip) - SRGGB10(default), SGRBG10, SGBRG10, SBGGR10 [Sakari Ailus: Use do_div() for dividing 64-bit numbers, fix fwnode if usage] Cc: Tomasz Figa <tfiga@chromium.org> Signed-off-by:Tianshu Qiu <tian.shu.qiu@intel.com> Signed-off-by:
Bingbu Cao <bingbu.cao@intel.com> Signed-off-by:
-
Mauro Carvalho Chehab authored
Function alignments are off by 1 space, as reported by checkpatch.pl --strict. Fix those. Acked-by:
-
Bingbu Cao authored
Add a v4l2 sub-device driver for the Sony imx319 image sensor. This is a camera sensor using the i2c bus for control and the csi-2 bus for data. This driver supports following features: - manual exposure and analog/digital gain control support - vblank/hblank control support - 4 test patterns control support - vflip/hflip control support (will impact the output bayer order) - support following resolutions: - 3264x2448, 3280x2464 @ 30fps - 1936x1096, 1920x1080 @ 60fps - 1640x1232, 1640x922, 1296x736, 1280x720 @ 120fps - support 4 bayer orders output (via change v/hflip) - SRGGB10(default), SGRBG10, SGBRG10, SBGGR10 [Sakari Ailus: Replace 64-bit division by do_div(), fix fwnode if usage] Cc: Tomasz Figa <tfiga@chromium.org> Signed-off-by: -
Sakari Ailus authored
Sometimes it may be necessary to grab a control while holding the control handler's lock. Provide an unlocked variant of v4l2_ctrl_grab for the purpose --- it's called __v4l2_ctrl_grab. Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
-
Sakari Ailus authored
v4l2_ctrl_grab() is documented in the header; there's no need to have a comment explaining what the function does in the .c file. Signed-off-by:
-
Sakari Ailus authored
The driver for the dw9807 voice coil was renamed as dw9807-vcm.c to reflect the fact that the chip also contains an EEPROM. While there is no EEPROM (nor MFD) driver yet and it may not be ever even needed, the driver was renamed accordingly. But the MAINTAINERS entry was not. Fix this. Fixes: e6c17ada ("media: dw9807-vcm: Recognise this is just the VCM bit of the device") Reported-by:
Joe Perches <joe@perches.com> Signed-off-by:
-
Marek Szyprowski authored
Commits 03fbdb2f ("media: move videobuf2 to drivers/media/common") and 7952be9b ("media: drivers/media/common/videobuf2: rename from videobuf") moved videobuf2 framework source code finally to drivers/media/common/videobuf2 directory, so update relevant paths in MAINTAINERS file. Reported-by:
Marek Szyprowski <m.szyprowski@samsung.com> Acked-by:
-
Sean Young authored
There is no need to create another input device. Signed-off-by:
Sean Young <sean@mess.org> Signed-off-by:
-
Sean Young authored
There is no need to create another input device. Signed-off-by:
-
Sean Young authored
libevdev (which is used by libinput) gets a list of keycodes from the input device on creation. Any events with keycodes which are not in this list are silently dropped. So, set all keycodes on device creation since we do not know which will be used if the keymap changes. Signed-off-by:
-
Mauro Carvalho Chehab authored
The v4l2_fwnode_reference_parse_int_props() has a big name, causing it to cause coding style warnings. Also, it depends on a const struct embedded indide a function. Rearrange the logic in order to move the struct declaration out of such function and use it inside this function. That cleans up some coding style issues. Acked-by:
-
Mauro Carvalho Chehab authored
There is already a typedef for the parse endpoint function. However, instead of using it, it is redefined at the C file (and on one of the function headers). Replace them by the function typedef, in order to cleanup several related coding style warnings. Acked-by:
-
Mauro Carvalho Chehab authored
There are several coding style issues at those definitions, and the previous patchset added even more. Address the trivial ones by first calling: ./scripts/checkpatch.pl --strict --fix-inline include/media/v4l2-async.h include/media/v4l2-fwnode.h include/media/v4l2-mediabus.h drivers/media/v4l2-core/v4l2-async.c drivers/media/v4l2-core/v4l2-fwnode.c and then manually adjusting the style where needed. Acked-by:
-
- 04 Oct, 2018 22 commits
-
-
Jacopo Mondi authored
As the v4l2-fwnode now allows drivers to set defaults, and eventually override them by specifying properties in DTS, use defaults for the CEU driver. Also remove endpoint properties from the gr-peach-audiocamerashield as they match the defaults now specified in the driver code (h/vsync-active and bus-width) or are not relevant to the interface as they cannot be configured (pclk-sample). Signed-off-by:
Jacopo Mondi <jacopo+renesas@jmondi.org> Signed-off-by:
-
Jacopo Mondi authored
As the v4l2-fwnode framework now allows specifying defaults configurations, expand the description of the optional endpoint properties for the CEU interface to better explain which are their defaults values. Signed-off-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Jacopo Mondi authored
Refer to video-interfaces.txt when describing standard properties. Signed-off-by:
-
Sakari Ailus authored
Instead of opportunistically trying to gather some information from the V4L2 endpoint, set the bus type and let the V4L2 fwnode framework figure out the configuration. Signed-off-by:
Steve Longerbeam <steve_longerbeam@mentor.com> Tested-by:
-
Sakari Ailus authored
The semantics of v4l2_fwnode_endpoint_parse() and v4l2_fwnode_endpoint_alloc_parse() have changed slightly: they now take the bus type from the user as well as a default configuration for the bus that shall reflect the DT binding defaults. Document this. Signed-off-by:
-
Sakari Ailus authored
The V4L2 fwnode framework only parsed CSI-2 D-PHY endpoints while C-PHY support wasn't there. Also parse endpoints for media bus type V4L2_MBUS_CSI2_CPHY. Signed-off-by:
-
Sakari Ailus authored
Use the given media bus type set by the caller. If none is given (i.e. the mbus type is V4L2_MBUS_UNKNOWN, or 0), fall back to the old behaviour. This is to obtain the information from the DT or try to guess the bus type. -ENXIO is returned if the caller sets the bus type but that does not match with what's in DT. Also return -ENXIO if bus type detection failed to separate this from the rest of the errors. Signed-off-by:
-
Sakari Ailus authored
Print bus type either as set by the driver or as parsed from the bus-type property, as well as the guessed V4L2 media bus type. Signed-off-by:
-
Sakari Ailus authored
The caller may provide default flags for the endpoint. Change the configuration based on what is available through the fwnode property API. Signed-off-by:
-
Sakari Ailus authored
Use the media bus types instead of the fwnode bus types internally. This is the interface to the drivers as well, making the use of the fwnode bus types more localised to the V4L2 fwnode framework. Signed-off-by:
-
Sakari Ailus authored
In order to prepare for allowing drivers to set the defaults for a given bus, make zeroing the struct conditional based on detecting the bus. All callers now set the bus type to zero which allows only zeroing the remaining bus union. Signed-off-by:
-
Sakari Ailus authored
Initialise the V4L2 fwnode endpoints to zero in all drivers using v4l2_fwnode_endpoint_parse(). This prepares for setting default endpoint flags as well as the bus type. Setting bus type to zero will continue to guess the bus among the guessable set (parallel, Bt.656 and CSI-2 D-PHY). Signed-off-by:
-
Sakari Ailus authored
Parsing the graph endpoint is always successful; therefore parse it as last. Signed-off-by:
-
Sakari Ailus authored
Most hardware doesn't support re-mapping of the CSI-2 lanes. Especially sensor drivers have a default number of lanes. Instead of requiring the caller (the driver) to provide such a unit mapping, provide one if no mapping is configured. Signed-off-by:
-
Sakari Ailus authored
Make use of the default CSI-2 lane mapping from caller-passed configuration. Signed-off-by:
-
Sakari Ailus authored
Only assign endpoint configuration if the endpoint is parsed successfully. Signed-off-by:
-
Sakari Ailus authored
Read the lane inversion independently of whether the "data-lanes" property exists. This makes sense since the caller may pass the number of lanes as the default configuration while the lane inversion configuration may still be available in firmware. Signed-off-by:
-
Sakari Ailus authored
Add support for parsing CSI-2 D-PHY, parallel or Bt.656 bus explicitly. Signed-off-by:
-
Sakari Ailus authored
In case the device supports multiple video bus types on an endpoint, the V4L2 fwnode framework attempts to detect the type based on the available information. This wasn't working really well, and sometimes could lead to the V4L2 fwnode endpoint struct as being mishandled between the bus types. Default to Bt.656 if no properties suggesting a bus type are found. Signed-off-by:
-
Sakari Ailus authored
Instead of allocating the V4L2 fwnode endpoint in v4l2_fwnode_endpoint_alloc_parse, let the caller to do this. This allows setting default parameters for the endpoint which is a very common need for drivers. Signed-off-by:
-
Sakari Ailus authored
The CSI-2 bus may use either D-PHY or C-PHY. Make this visible in media bus enum. Signed-off-by:
-
Sakari Ailus authored
Add definitions corresponding to DT bindings to the CSI-2 D-PHY, parallel and Bt.656 busses. Signed-off-by:
-
