- 13 Jul, 2006 15 commits
-
-
David S. Miller authored
It is only needed when there is a PCI-PCI bridge sitting between the device and the PCI host controller which is not a Simba APB bridge. Add logic to handle two special cases: 1) device behind EBUS, which sits on PCI 2) PCI controller interrupts Signed-off-by:David S. Miller <davem@davemloft.net>
-
David S. Miller authored
The sunsu_ports[] array exists merely to be able to easily use an integer index to get at the proper serial console port struct. We size this only for real ports, not for the keyboard and mouse, and thus keyboard and mouse port registration would fail. Fix this by dynamically allocating the port struct for the keyboard and mouse, instead of using the sunsu_ports[] array. Signed-off-by: -
David S. Miller authored
When installing the IRQ pre-handler, we were not setting up the second argument correctly. It should be a pointer to the sabre_irq_data, not the config space PIO address. Furthermore, we only need this pre-handler installed if the device sits behind a PCI bridge that is not Sabre or Simba/APB. Signed-off-by: -
David S. Miller authored
Signed-off-by: -
David Woodhouse authored
A minor typo in the include/asm-sparc64/Kbuild file prevents the make headers_install from building a useful tree of kernel headers for sparc64. Signed-off-by:
David Woodhouse <dwmw2@infradead.org> Signed-off-by:
Tom "spot" Callaway <tcallawa@redhat.com> Signed-off-by:
-
Andrew Morton authored
device_create_file() can fail. This causes the sparc64 compile to fail when my fanatical __must_check patch is applied, due to -Werror. [ Added necessary identical fix for sparc32. -DaveM] Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
-
Linus Torvalds authored
* HEAD: [NET]: fix __sk_stream_mem_reclaim [Bluetooth] Fix deadlock in the L2CAP layer [Bluetooth] Let BT_HIDP depend on INPUT [Bluetooth] Avoid NULL pointer dereference with tty->driver [Bluetooth] Remaining transitions to use kzalloc() [WAN]: converting generic HDLC to use netif_dormant*() [IPV4]: Fix error handling for fib_insert_node call [NETROM] lockdep: fix false positive [ROSE] lockdep: fix false positive [AX.25]: Optimize AX.25 socket list lock [IPCOMP]: Fix truesize after decompression [IPV6]: Use ipv6_addr_src_scope for link address sorting. [TCP] tcp_highspeed: Fix AI updates. [MAINTAINERS]: Add proper entry for TC classifier [NETROM]: Drop lock before calling nr_destroy_socket [NETROM]: Fix locking order when establishing a NETROM circuit. [AX.25]: Fix locking of ax25 protocol function list. [IPV6]: order addresses by scope
-
Linus Torvalds authored
* HEAD: [PATCH] hwmon: Documentation update for abituguru [PATCH] hwmon: Fix for first generation Abit uGuru chips [PATCH] hwmon: New maintainer for w83791d [PATCH] pca9539: Honor the force parameter [PATCH] i2c-algo-bit: Wipe out dead code [PATCH] i2c: Handle i2c_add_adapter failure in i2c algorithm drivers [PATCH] i2c: New mailing list [PATCH] i2c-ite: Plan for removal [PATCH] i2c-powermac: Fix master_xfer return value [PATCH] scx200_acb: Fix the block transactions [PATCH] scx200_acb: Fix the state machine [PATCH] i2c-iop3xx: Avoid addressing self [PATCH] i2c: Fix 'ignore' module parameter handling in i2c-core
-
Linus Torvalds authored
* HEAD: [PATCH] The scheduled unexport of insert_resource [PATCH] remove kernel/power/pm.c:pm_unregister_all() [PATCH] Driver core: bus.c cleanups [PATCH] Driver core: kernel-doc in drivers/base/core.c corrections [PATCH] Driver core: fix driver-core kernel-doc
-
Linus Torvalds authored
* HEAD: [PATCH] PCI: PCIE power management quirk [PATCH] PCI: add PCI Express AER register definitions to pci_regs.h [PATCH] PCI: Clear abnormal poweroff flag on VIA southbridges, fix resume [PATCH] PCI: poper prototype for arch/i386/pci/pcbios.c:pcibios_sort()
-
Linus Torvalds authored
* HEAD: (44 commits) [PATCH] USB: move usb-serial.h to include/linux/usb/ [PATCH] USB: Anydata: Fixes wrong URB callback. [PATCH] USB: gadget section fixups [PATCH] USB: another unusual device [PATCH] USB: Add one VID/PID to ftdi_sio [PATCH] USB: unusual_devs entry for Sony DSC-H5 [PATCH] USB: unusual_devs entry for Nokia E61 [PATCH] USB: unusual_devs entry for Nokia N91 [PATCH] USB: add ZyXEL vendor/product ID to rtl8150 driver [PATCH] USB: Option driver: new product ID [PATCH] USB: add support for WiseGroup., Ltd SmartJoy Dual PLUS Adapter [PATCH] USB: ipw.c driver fix [PATCH] USB: remove devfs information from Kconfig [PATCH] USB: remove empty destructor from drivers/usb/mon/mon_text.c [PATCH] USB: ipaq.c timing parameters [PATCH] USB: ipaq.c bugfixes [PATCH] USB: ehci: fix bogus alteration of a local variable [PATCH] USB: add driver for non-composite Sierra Wireless devices [PATCH] USB: fix pointer dereference in drivers/usb/misc/usblcd [PATCH] USB: Kill compiler warning in quirk_usb_handoff_ohci ...
-
Linus Torvalds authored
* HEAD: [PATCH] w1: remove drivers/w1/w1.h [PATCH] w1: fix idle check loop in ds2482 [PATCH] W1: remove w1 mail list from lm_sensors.
-
Linus Torvalds authored
Revert "[PATCH] pcmcia: Make ide_cs work with the memory space of CF-Cards if IO space is not available" This reverts commit 5040cb8b. It breaks previously working ide-cs PIO configurations, causing problems like ide2: I/O resource 0xF883200E-0xF883200E not free. ide2: ports already in use, skipping probe rather than a working kernel. Cc: Thomas Kleffel <tk@maintech.de> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
Len Brown authored
This effectively reverts commit b8d35192 by reverts acpi_os_queue_for_execution() to what it was before that, except it changes the name to acpi_os_execute() to match ACPICA 20060512. Signed-off-by:
Len Brown <len.brown@intel.com> [ The thread execution doesn't actually solve the bug it set out to solve (see http://bugzilla.kernel.org/show_bug.cgi?id=5534 for more details) because the new events can get caught behind the AML semaphore or other serialization. And when that happens, the notify threads keep on piling up until the system dies. ] Signed-off-by:
-
Ian McDonald authored
__sk_stream_mem_reclaim is only called by sk_stream_mem_reclaim. As such the check on sk->sk_forward_alloc is not needed and can be removed. Signed-off-by:
Ian McDonald <ian.mcdonald@jandi.co.nz> Acked-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
- 12 Jul, 2006 25 commits
-
-
Linus Torvalds authored
* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6: [PATCH] sky2: optimize receive restart [PATCH] sky2: PHY power on delays [PATCH] sky2: NAPI suspend/resume of dual port cards [PATCH] sky2: sky2_reset section mismatch [PATCH] sk98lin: fix truncated collision threshold mask [PATCH] skge: fix truncated collision threshold mask [PATCH] sky2: fix truncated collision threshold mask [PATCH] myri10ge return value fix [PATCH] Update smc91x driver with ARM Versatile board info [PATCH] ixgb: fix tx unit hang - properly calculate desciptor count [PATCH] smsc-ircc2: fix section reference mismatches [PATCH] 8139cp.c printk fix [PATCH] s2io driver irq fix [PATCH] e1000: irq naming update [PATCH] forcedeth: watermark fixup [PATCH] forcedeth: deferral fixup [PATCH] zd1211rw: usb_clear_halt not allowed in IRQ context [PATCH] bcm43xx-softmac: Fix an off-by-one condition in handle_irq_noise
-
Adrian Bunk authored
Implement the scheduled unexport of insert_resource. Signed-off-by:
Adrian Bunk <bunk@stusta.de> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
-
Adrian Bunk authored
Remove the deprecated and no longer used pm_unregister_all(). Signed-off-by:
Pavel Machek <pavel@suse.cz> Signed-off-by:
-
Adrian Bunk authored
This patch contains the following cleanups: - make the needlessly global bus_subsys static - #if 0 the unused find_bus() Signed-off-by:
-
Henrik Kretzschmar authored
Corrects the kerneldocs for device_create() and device_destroy() with an eye on coding style, grammar and readability. Signed-off-by:
Henrik Kretzschmar <henne@nachtwindheim.de> Signed-off-by:
-
Randy Dunlap authored
Warning(/var/linsrc/linux-2617-g4//drivers/base/core.c:574): No description found for parameter 'class' Warning(/var/linsrc/linux-2617-g4//drivers/base/core.c:574): No description found for parameter 'devt' Warning(/var/linsrc/linux-2617-g4//drivers/base/core.c:626): No description found for parameter 'devt' Signed-off-by:
Randy Dunlap <rdunlap@xenotime.net> Signed-off-by:
-
Kristen Carlson Accardi authored
When changing power states from D0->DX and then from DX->D0, some Intel PCIE chipsets will cause a device reset to occur. This will cause problems for any D State other than D3, since any state information that the driver will expect to be present coming from a D1 or D2 state will have been cleared. This patch addes a flag to the pci_dev structure to indicate that devices should not use states D1 or D2, and will set that flag for the affected chipsets. This patch also modifies pci_set_power_state() so that when a device driver tries to set the power state on a device that is downstream from an affected chipset, or on one of the affected devices it only allows state changes to or from D0 & D3. In addition, this patch allows the delay time between D3->D0 to be changed via a quirk. These chipsets also need additional time to change states beyond the normal 10ms. Signed-off-by:
Kristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by:
-
Zhang, Yanmin authored
Add new defines of PCI-Express AER registers and their bits into file include/linux/pci_regs.h. Signed-off-by:
Zhang Yanmin <yanmin.zhang@intel.com> Signed-off-by:
-
Matthew Garrett authored
Some VIA southbridges contain a flag in the ACPI register space that indicates whether an abnormal poweroff has occured, presumably with the intention that it can be cleared on clean shutdown. Some BIOSes check this flag at resume time, and will re-POST the system rather than jump back to the OS if it's set. Clearing it at boot time appears to be sufficient. I'm not sure if drivers/pci/quirks.c is the right place to do it, but I'm not sure where would be cleaner. [akpm@osdl.org: cleanups, build fix] Signed-off-by:
Matthew Garrett <mjg59@srcf.ucam.org> Cc: Greg KH <greg@kroah.com> Cc: "Brown, Len" <len.brown@intel.com> Cc: "Yu, Luming" <luming.yu@intel.com> Signed-off-by:
-
Adrian Bunk authored
This patch adds a proper prototype for pcibios_sort() in arch/i386/pci/pci.h. Signed-off-by:
-
Greg Kroah-Hartman authored
USB serial outside of the kernel tree can not build properly due to usb-serial.h being buried down in the source tree. This patch moves the location of the file to include/linux/usb and fixes up all of the usb serial drivers to handle the move properly. Cc: Sergei Organov <osv@javad.com> Signed-off-by: -
Luiz Fernando N. Capitulino authored
Anydata is using usb_serial_generic_write_bulk_callback() for its read URB, but it should use usb_serial_generic_read_bulk_callback() instead (it's a read URB, isn't it?). Reported by Jon K Hellan <hellan@acm.org>. Signed-off-by:
Luiz Fernando N. Capitulino <lcapitulino@mandriva.com.br> Signed-off-by:
-
David Brownell authored
Recent section changes broke gadget builds on some platforms. This patch is the best fix that's available until better section markings exist: - There's a lot of cleanup code that gets used in both init and exit paths; stop marking it as "__exit". (Best fix for this would be an "__init_or_exit" section marking, putting the cleanup in __init when __exit sections get discarded else in __exit.) - Stop marking the use-once probe routines as "__init" since references to those routines are not allowed from driver structures. They're now marked "__devinit", which in practice is a net lose. (Best fix for this is likely to separate such use-once probe routines from the driver structure ... but in general, all busses that aren't hotpluggable will be forced to waste memory for all probe-only code.) In general these broken section rules waste an average of two to four kBytes per driver of code bloat ... because none of the relevant code can ever be reused after module initialization. Signed-off-by:
David Brownell <dbrownell@users.sourceforge.net> Signed-off-by:
-
Phil Dibowitz authored
Please add the attached device to unusual_devs.h. Signed-off-by:
Phil Dibowitz <phil@ipom.com> Signed-off-by:
-
Colin Leroy authored
This patch adds the Testo USB interface to the list of devices recognized by the ftdi_sio module. This device is based on a FT232BL chip, and is used as an interface to get data from digital sensors (thermometer, etc). See http://www.testo.com/Signed-off-by:
Colin Leroy <colin@colino.net> Signed-off-by:
-
Lars Jacob authored
This patch (as749) extends the unusual_devs entry for the Sony DSC-T1 and T5 to cover the H5 as well. From: Lars Jacob <jacob.lars@googlemail.com> Signed-off-by:
Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
-
Alan Stern authored
This patch (as748) adds an unusual_devs entry for the Nokia E61 mobile phone. Signed-off-by:
-
Alan Stern authored
This patch (as745) adds an unusual_devs entry for the Nokia N91, just like the entry for the N80 added a couple of weeks ago. Apparently Nokia isn't using very good firmware these days... Signed-off-by:
-
Dan Streetman authored
I just got a "ZyXEL Prestige USB Adapter" that is actually RTL8150 adapter. Here is the relevant /proc/bus/usb/devices output (after adding the vendor/product IDs to the driver): T: Bus=01 Lev=02 Prnt=02 Port=02 Cnt=02 Dev#=119 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=0586 ProdID=401a Rev= 1.00 S: Manufacturer=ZyXEL S: Product=Prestige USB Adapter S: SerialNumber=1027 C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=120mA I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=ff Driver=rtl8150 E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=83(I) Atr=03(Int.) MxPS= 8 Ivl=1ms This patch adds the ZyXEL vendor ID to the rtl8150.c driver. The device has absolutely no identifying marks on the outside for model type, just a serial number, and I can't find anything on ZyXEL's website, so I called the product ID PRODUCT_ID_PRESTIGE to match the product string. Signed-off-by:
Dan Streetman <ddstreet@ieee.org> Acked-by: <petkan@users.sourceforge.net> Signed-off-by:
-
Matthias Urlichs authored
Yet another "same name, somewhat different hardware" product. Signed-Off-By:
Matthias Urlichs <smurf@smurf.noris.de> Signed-off-by:
-
Navaho Gunleg authored
This patch is to get the WiseGroup.,Ltd SmartJoy Dual Plus PS2-to-USB Adapter [0x6677:0x8802] correctly detected. It sets the NOGET and MULTI_INPUT quirks to make 2 joystick nodes appear in stead of only one. (As of yet, only confirmed working by myself.) Signed-off-by:
Navaho Gunleg <navahogunleg@gmail.com> Signed-off-by:
-
Bart Oldeman authored
The below patch fixes the ipw module in kernel 2.6.17 for me; without this change it simply does not work at all (all but the first writes are refused because write_urb_busy is always 1). This problem was there in 2.6.15 as well, but at that point I used the (updated) ipw.c, version 0.4, from http://www.neology.co.za/products/opensource/ipwireless/ which no longer compiles with 2.6.17. It can be made to after a few changes but obviously it's easier if the built-in ipw driver works instead of having to download one from the neology site. From: Bart Oldeman <bartoldeman@users.sourceforge.net> Signed-off-by:
-
Michal Piotrowski authored
Devfs is gone. We can remove that information. Signed-off-by:
Michal Piotrowski <michal.k.k.piotrowski@gmail.com> Signed-off-by:
-
Christoph Lameter authored
Remove destructor and call kmem_cache_create with NULL for the destructor. Acked-by:
Pekka Enberg <penberg@cs.helsinki.fi> Signed-off-by:
Christoph Lameter <clameter@sgi.com> Signed-off-by:
-
Frank Gevaerts authored
Adds configurable waiting periods to the ipaq connection code. These are not needed when the pocketpc device is running normally when plugged in, but they need extra delays if they are physically connected while rebooting. There are two parameters : * initial_wait : this is the delay before the driver attemts to start the connection. This is needed because the pocktpc device takes much longer to boot if the driver starts sending control packets too soon. * connect_retries : this is the number of times the control urb is retried before finally giving up. The patch also adds a 1 second delay between retries. I'm not sure if the cases where this patch is useful are general enough to include this in the kernel. Signed-off-by:
Frank Gevaerts <frank.gevaerts@fks.be> Signed-off-by:
-
