- 17 Aug, 2015 9 commits
-
-
Martin KaFai Lau authored
rt6_make_pcpu_route() is called under read_lock(&table->tb6_lock). rt6_make_pcpu_route() calls ip6_rt_pcpu_alloc(rt) which then calls dst_alloc(). dst_alloc() _may_ call ip6_dst_gc() which takes the write_lock(&tabl->tb6_lock). A visualized version: read_lock(&table->tb6_lock); rt6_make_pcpu_route(); => ip6_rt_pcpu_alloc(); => dst_alloc(); => ip6_dst_gc(); => write_lock(&table->tb6_lock); /* oops */ The fix is to do a read_unlock first before calling ip6_rt_pcpu_alloc(). A reported stack: [141625.537638] INFO: rcu_sched self-detected stall on CPU { 27} (t=60000 jiffies g=4159086 c=4159085 q=2139) [141625.547469] Task dump for CPU 27: [141625.550881] mtr R running task 0 22121 22081 0x00000008 [141625.558069] 0000000000000000 ffff88103f363d98 ffffffff8106e488 000000000000001b [141625.565641] ffffffff81684900 ffff88103f363db8 ffffffff810702b0 0000000008000000 [141625.573220] ffffffff81684900 ffff88103f363de8 ffffffff8108df9f ffff88103f375a00 [141625.580803] Call Trace: [141625.583345] <IRQ> [<ffffffff8106e488>] sched_show_task+0xc1/0xc6 [141625.589650] [<ffffffff810702b0>] dump_cpu_task+0x35/0x39 [141625.595144] [<ffffffff8108df9f>] rcu_dump_cpu_stacks+0x6a/0x8c [141625.601320] [<ffffffff81090606>] rcu_check_callbacks+0x1f6/0x5d4 [141625.607669] [<ffffffff810940c8>] update_process_times+0x2a/0x4f [141625.613925] [<ffffffff8109fbee>] tick_sched_handle+0x32/0x3e [141625.619923] [<ffffffff8109fc2f>] tick_sched_timer+0x35/0x5c [141625.625830] [<ffffffff81094a1f>] __hrtimer_run_queues+0x8f/0x18d [141625.632171] [<ffffffff81094c9e>] hrtimer_interrupt+0xa0/0x166 [141625.638258] [<ffffffff8102bf2a>] local_apic_timer_interrupt+0x4e/0x52 [141625.645036] [<ffffffff8102c36f>] smp_apic_timer_interrupt+0x39/0x4a [141625.651643] [<ffffffff8140b9e8>] apic_timer_interrupt+0x68/0x70 [141625.657895] <EOI> [<ffffffff81346ee8>] ? dst_destroy+0x7c/0xb5 [141625.664188] [<ffffffff813d45b5>] ? fib6_flush_trees+0x20/0x20 [141625.670272] [<ffffffff81082b45>] ? queue_write_lock_slowpath+0x60/0x6f [141625.677140] [<ffffffff8140aa33>] _raw_write_lock_bh+0x23/0x25 [141625.683218] [<ffffffff813d4553>] __fib6_clean_all+0x40/0x82 [141625.689124] [<ffffffff813d45b5>] ? fib6_flush_trees+0x20/0x20 [141625.695207] [<ffffffff813d6058>] fib6_clean_all+0xe/0x10 [141625.700854] [<ffffffff813d60d3>] fib6_run_gc+0x79/0xc8 [141625.706329] [<ffffffff813d0510>] ip6_dst_gc+0x85/0xf9 [141625.711718] [<ffffffff81346d68>] dst_alloc+0x55/0x159 [141625.717105] [<ffffffff813d09b5>] __ip6_dst_alloc.isra.32+0x19/0x63 [141625.723620] [<ffffffff813d1830>] ip6_pol_route+0x36a/0x3e8 [141625.729441] [<ffffffff813d18d6>] ip6_pol_route_output+0x11/0x13 [141625.735700] [<ffffffff813f02c8>] fib6_rule_action+0xa7/0x1bf [141625.741698] [<ffffffff813d18c5>] ? ip6_pol_route_input+0x17/0x17 [141625.748043] [<ffffffff81357c48>] fib_rules_lookup+0xb5/0x12a [141625.754050] [<ffffffff81141628>] ? poll_select_copy_remaining+0xf9/0xf9 [141625.761002] [<ffffffff813f0535>] fib6_rule_lookup+0x37/0x5c [141625.766914] [<ffffffff813d18c5>] ? ip6_pol_route_input+0x17/0x17 [141625.773260] [<ffffffff813d008c>] ip6_route_output+0x7a/0x82 [141625.779177] [<ffffffff813c44c8>] ip6_dst_lookup_tail+0x53/0x112 [141625.785437] [<ffffffff813c45c3>] ip6_dst_lookup_flow+0x2a/0x6b [141625.791604] [<ffffffff813ddaab>] rawv6_sendmsg+0x407/0x9b6 [141625.797423] [<ffffffff813d7914>] ? do_ipv6_setsockopt.isra.8+0xd87/0xde2 [141625.804464] [<ffffffff8139d4b4>] inet_sendmsg+0x57/0x8e [141625.810028] [<ffffffff81329ba3>] sock_sendmsg+0x2e/0x3c [141625.815588] [<ffffffff8132be57>] SyS_sendto+0xfe/0x143 [141625.821063] [<ffffffff813dd551>] ? rawv6_setsockopt+0x5e/0x67 [141625.827146] [<ffffffff8132c9f8>] ? sock_common_setsockopt+0xf/0x11 [141625.833660] [<ffffffff8132c08c>] ? SyS_setsockopt+0x81/0xa2 [141625.839565] [<ffffffff8140ac17>] entry_SYSCALL_64_fastpath+0x12/0x6a Fixes: d52d3997 ("pv6: Create percpu rt6_info") Signed-off-by: Martin KaFai Lau <kafai@fb.com> CC: Hannes Frederic Sowa <hannes@stressinduktion.org> Reported-by: Steinar H. Gunderson <sgunderson@bigfoot.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Martin KaFai Lau authored
It is a prep work for fixing a potential deadlock when creating a pcpu rt. The current rt6_get_pcpu_route() will also create a pcpu rt if one does not exist. This patch moves the pcpu rt creation logic into another function, rt6_make_pcpu_route(). Signed-off-by: Martin KaFai Lau <kafai@fb.com> CC: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Martin KaFai Lau authored
After 4b32b5ad ("ipv6: Stop rt6_info from using inet_peer's metrics"), ip6_dst_alloc() does not need the 'table' argument. This patch cleans it up. Signed-off-by: Martin KaFai Lau <kafai@fb.com> CC: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Igor Plyatov authored
* Due to HW bug, LAN8700 sometimes does not detect presence of energy in the Ethernet cable in Energy Detect Power-Down mode (e.g while EDPWRDOWN bit is set, the ENERGYON bit does not asserted sometimes). This is a common bug of LAN87xx family of PHY chips. * The lan87xx_read_status() was improved to acquire ENERGYON bit. Its previous algorythm still not reliable on 100 % and sometimes skip cable plugging. Signed-off-by: Igor Plyatov <plyatov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Merge tag 'mac80211-for-davem-2015-08-14' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211 Johannes Berg says: ==================== We have a single bugfix for an invalid memory read. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Dan Carpenter authored
The dma_mapping_error() function returns true or false. We should return -ENOMEM if it there is a dma mapping error. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Guillaume Nault authored
PPP devices may get automatically unregistered when their network namespace is getting removed. This happens if the ppp control plane daemon (e.g. pppd) exits while it is the last user of this namespace. This leads to several races: * ppp_exit_net() may destroy the per namespace idr (pn->units_idr) before all file descriptors were released. Successive ppp_release() calls may then cleanup PPP devices with ppp_shutdown_interface() and try to use the already destroyed idr. * Automatic device unregistration may also happen before the ppp_release() call for that device gets executed. Once called on the file owning the device, ppp_release() will then clean it up and try to unregister it a second time. To fix these issues, operations defined in ppp_shutdown_interface() are moved to the PPP device's ndo_uninit() callback. This allows PPP devices to be properly cleaned up by unregister_netdev() and friends. So checking for ppp->owner is now an accurate test to decide if a PPP device should be unregistered. Setting ppp->owner is done in ppp_create_interface(), before device registration, in order to avoid unprotected modification of this field. Finally, ppp_exit_net() now starts by unregistering all remaining PPP devices to ensure that none will get unregistered after the call to idr_destroy(). Signed-off-by: Guillaume Nault <g.nault@alphalink.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Shaohui Xie authored
Currently, if phy state is PHY_RUNNING, we always register a CHANGE when phy works in polling or interrupt ignored, this will make the adjust_link being called even the phy link did Not changed. checking the phy link to make sure the link did changed before we register a CHANGE, if link did not changed, we do nothing. Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Calvin Owens authored
Commit 8133534c ("net: limit tcp/udp rmem/wmem to SOCK_{RCV,SND}BUF_MIN") modified four sysctls to enforce that the values written to them are not less than SOCK_MIN_{RCV,SND}BUF. That change causes 4096 to no longer be accepted as a valid value for 'min' in tcp_wmem and udp_wmem_min. 4096 has been the default for both of those sysctls for a long time, and unfortunately seems to be an extremely popular setting. This change breaks a large number of sysctl configurations at Facebook. That commit referred to b1cb59cf ("net: sysctl_net_core: check SNDBUF and RCVBUF for min length"), which choose to use the SOCK_MIN constants as the lower limits to avoid nasty bugs. But AFAICS, a limit of SOCK_MIN_SNDBUF isn't necessary to do that: the BUG_ON cited in the commit message seems to have happened because unix_stream_sendmsg() expects a minimum of a full page (ie SK_MEM_QUANTUM) and the math broke, not because it had less than SOCK_MIN_SNDBUF allocated. This particular issue doesn't seem to affect TCP however: using a setting of "1 1 1" for tcp_{r,w}mem works, although it's obviously suboptimal. SK_MEM_QUANTUM would be a nice minimum, but it's 64K on some archs, so there would still be breakage. Since a value of one doesn't seem to cause any problems, we can drop the minimum 8133534c added to fix this. This reverts commit 8133534c. Fixes: 8133534c ("net: limit tcp/udp rmem/wmem to SOCK_MIN...") Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: Sorin Dumitru <sorin@returnze.ro> Signed-off-by: Calvin Owens <calvinowens@fb.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 14 Aug, 2015 4 commits
-
-
Eric Dumazet authored
When replacing del_timer() with del_timer_sync(), I introduced a deadlock condition : reqsk_queue_unlink() is called from inet_csk_reqsk_queue_drop() inet_csk_reqsk_queue_drop() can be called from many contexts, one being the timer handler itself (reqsk_timer_handler()). In this case, del_timer_sync() loops forever. Simple fix is to test if timer is pending. Fixes: 2235f2ac ("inet: fix races with reqsk timers") Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Claudiu Manoil authored
There are some MAC registers that need to be kept in sync with the link state parameters, see adjust_link(). However, after a MAC soft reset default values for these registers are assumed. In some cases (excepting if down/ if up for example) adjust_link() does not see that these values were reset to default because the priv->old* link parameters were left unchanged. So, reset the priv->old* link params as well during a MAC reset to let adjust_link() restore the MAC link settings to the actual link state values. Fixes following case, for example: Setting link to 100M, changing MTU (implies MAC reset), link state remains unchanged to 100M but MAC registers were reset to default (1G) breaking the connectivity w/ the PHY. Closing and re-opening the interface would restore the MAC link parameters to the correct values. Signed-off-by: Claudiu Manoil <claudiu.manoil@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Andy Whitcroft authored
When generating /proc/net/route we emit a header followed by a line for each route. When a short read is performed we will restart this process based on the open file descriptor. When calculating the start point we fail to take into account that the 0th entry is the header. This leads us to skip the first entry when doing a continuation read. This can be easily seen with the comparison below: while read l; do echo "$l"; done </proc/net/route >A cat /proc/net/route >B diff -bu A B | grep '^[+-]' On my example machine I have approximatly 10KB of route output. There we see the very first non-title element is lost in the while read case, and an entry around the 8K mark in the cat case: +wlan0 00000000 02021EAC 0003 0 0 400 00000000 0 0 0 -tun1 00C0AC0A 00000000 0001 0 0 950 00C0FFFF 0 0 0 Fix up the off-by-one when reaquiring position on continuation. Fixes: 8be33e95 ("fib_trie: Fib walk rcu should take a tnode and key instead of a trie and a leaf") BugLink: http://bugs.launchpad.net/bugs/1483440Acked-by: Alexander Duyck <alexander.h.duyck@redhat.com> Signed-off-by: Andy Whitcroft <apw@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Linus Lüssing authored
The recent refactoring of the IGMP and MLD parsing code into ipv6_mc_check_mld() / ip_mc_check_igmp() introduced a potential crash / BUG() invocation for bridges: I wrongly assumed that skb_get() could be used as a simple reference counter for an skb which is not the case. skb_get() bears additional semantics, a user count. This leads to a BUG() invocation in pskb_expand_head() / kernel panic if pskb_may_pull() is called on an skb with a user count greater than one - unfortunately the refactoring did just that. Fixing this by removing the skb_get() call and changing the API: The caller of ipv6_mc_check_mld() / ip_mc_check_igmp() now needs to additionally check whether the returned skb_trimmed is a clone. Fixes: 9afd85c9 ("net: Export IGMP/MLD message validation code") Reported-by: Brenden Blanco <bblanco@plumgrid.com> Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue> Acked-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 13 Aug, 2015 8 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dmLinus Torvalds authored
Pull device mapper fixes from Mike Snitzer: - two stable fixes for corruption seen in a snapshot of thinp metadata; metadata snapshots aren't widely used but help provide a consistent view of the metadata associated with an active thin-pool. - a dm-cache fix for the 4.2 "default" policy switch from "mq" to "smq" * tag 'dm-4.2-fixes-5' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: dm cache policy smq: move 'dm-cache-default' module alias to SMQ dm btree: add ref counting ops for the leaves of top level btrees dm thin metadata: delete btrees when releasing metadata snapshot
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull xen block driver fixes from Jens Axboe: "A few small bug fixes for xen-blk{front,back} that have been sitting over my vacation" * 'for-linus' of git://git.kernel.dk/linux-block: xen-blkback: replace work_pending with work_busy in purge_persistent_gnt() xen-blkfront: don't add indirect pages to list when !feature_persistent xen-blkfront: introduce blkfront_gather_backend_features()
-
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tipLinus Torvalds authored
Pull xen bug fixes from David Vrabel: - revert a fix from 4.2-rc5 that was causing lots of WARNING spam. - fix a memory leak affecting backends in HVM guests. - fix PV domU hang with certain configurations. * tag 'for-linus-4.2-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen/xenbus: Don't leak memory when unmapping the ring on HVM backend Revert "xen/events/fifo: Handle linked events when closing a port" x86/xen: build "Xen PV" APIC driver for domU as well
-
Linus Torvalds authored
This reverts commits 9a036b93 ("x86/signal/64: Remove 'fs' and 'gs' from sigcontext") and c6f20629 ("x86/signal/64: Fix SS handling for signals delivered to 64-bit programs"). They were cleanups, but they break dosemu by changing the signal return behavior (and removing 'fs' and 'gs' from the sigcontext struct - while not actually changing any behavior - causes build problems). Reported-and-tested-by: Stas Sergeev <stsp@list.ru> Acked-by: Andy Lutomirski <luto@amacapital.net> Cc: Ingo Molnar <mingo@kernel.org> Cc: stable@vger.kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) Workaround hw bug when acquiring PCI bos ownership of iwlwifi devices, from Emmanuel Grumbach. 2) Falling back to vmalloc in conntrack should not emit a warning, from Pablo Neira Ayuso. 3) Fix NULL deref when rtlwifi driver is used as an AP, from Luis Felipe Dominguez Vega. 4) Rocker doesn't free netdev on device removal, from Ido Schimmel. 5) UDP multicast early sock demux has route handling races, from Eric Dumazet. 6) Fix L4 checksum handling in openvswitch, from Glenn Griffin. 7) Fix use-after-free in skb_set_peeked, from Herbert Xu. 8) Don't advertize NETIF_F_FRAGLIST in virtio_net driver, this can lead to fraglists longer than the driver can support. From Jason Wang. 9) Fix mlx5 on non-4k-pagesize systems, from Carol L Soto. 10) Fix interrupt storm in bna driver, from Ivan Vecera. 11) Don't propagate -EBUSY from netlink_insert(), from Daniel Borkmann. 12) Fix inet request sock leak, from Eric Dumazet. 13) Fix TX interrupt masking and marking in TX descriptors of fs_enet driver, from LEROY Christophe. 14) Get rid of rule optimizer in gianfar driver, it's buggy and unlikely to get fixed any time soon. From Jakub Kicinski * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (61 commits) cosa: missing error code on failure in probe() gianfar: remove faulty filer optimizer gianfar: correct list membership accounting gianfar: correct filer table writing bonding: Gratuitous ARP gets dropped when first slave added net: dsa: Do not override PHY interface if already configured net: fs_enet: mask interrupts for TX partial frames. net: fs_enet: explicitly remove I flag on TX partial frames inet: fix possible request socket leak inet: fix races with reqsk timers mkiss: Fix error handling in mkiss_open() bnx2x: Free NVRAM lock at end of each page bnx2x: Prevent null pointer dereference on SKB release cxgb4: missing curly braces in t4_setup_debugfs() net-timestamp: Update skb_complete_tx_timestamp comment ipv6: don't reject link-local nexthop on other interface netlink: make sure -EBUSY won't escape from netlink_insert bna: fix interrupts storm caused by erroneous packets net: mvpp2: replace TX coalescing interrupts with hrtimer net: mvpp2: enable proper per-CPU TX buffers unmapping ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/bp/bpLinus Torvalds authored
Pull EDAC fix from Borislav Petkov: "A ppc4xx_edac fix for accessing ->csrows properly. This driver was missed during the conversion a couple of years ago" * tag 'edac_fix_for_4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp: EDAC, ppc4xx: Access mci->csrows array elements properly
-
Adrien Schildknecht authored
At the last iteration of the loop, j may equal zero and thus tp_list[j - 1] causes an invalid read. Change the logic of the loop so that j - 1 is always >= 0. Cc: stable@vger.kernel.org Signed-off-by: Adrien Schildknecht <adrien+dev@schischi.me> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
-
Michael Walle authored
The commit de3910eb ("edac: change the mem allocation scheme to make Documentation/kobject.txt happy") changed the memory allocation for the csrows member. But ppc4xx_edac was forgotten in the patch. Fix it. Signed-off-by: Michael Walle <michael@walle.cc> Cc: <stable@vger.kernel.org> Cc: linux-edac <linux-edac@vger.kernel.org> Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Link: http://lkml.kernel.org/r/1437469253-8611-1-git-send-email-michael@walle.ccSigned-off-by: Borislav Petkov <bp@suse.de>
-
- 12 Aug, 2015 16 commits
-
-
Dan Carpenter authored
If register_hdlc_device() fails, the current code returns 0 but we should return an error code instead. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Jakub Kicinski says: ==================== gianfar: filer changes respinning with examples as requested. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jakub Kicinski authored
Current filer rule optimization is broken in several ways: (1) Can perform reads/writes beyond end of allocated tables. (gianfar_ethtool.c:1326). (2) It breaks badly for rules with more than 2 specifiers (e.g. matching ip, port, tos). Example: # ethtool -N eth2 flow-type udp4 dst-ip 10.0.0.1 dst-port 1 tos 1 action 1 Added rule with ID 254 # ethtool -N eth2 flow-type udp4 dst-ip 10.0.0.2 dst-port 2 tos 2 action 9 Added rule with ID 253 # ethtool -N eth2 flow-type udp4 dst-ip 10.0.0.3 dst-port 3 tos 3 action 17 Added rule with ID 252 # ./filer_decode /sys/kernel/debug/gfar1/filer_raw 00: MASK == 00000210 AND Q:00 ctrl:00000080 prop:00000210 01: FPR == 00000210 AND CLE Q:00 ctrl:00000281 prop:00000210 02: MASK == ffffffff AND Q:00 ctrl:00000080 prop:ffffffff 03: DPT == 00000003 AND Q:00 ctrl:0000008e prop:00000003 04: TOS == 00000003 AND Q:00 ctrl:0000008a prop:00000003 05: DIA == 0a000003 AND Q:11 ctrl:0000448c prop:0a000003 06: DPT == 00000002 AND Q:00 ctrl:0000008e prop:00000002 07: TOS == 00000002 AND Q:00 ctrl:0000008a prop:00000002 08: DIA == 0a000002 AND Q:09 ctrl:0000248c prop:0a000002 09: DIA == 0a000001 AND Q:00 ctrl:0000008c prop:0a000001 0a: DPT == 00000001 AND Q:00 ctrl:0000008e prop:00000001 0b: TOS == 00000001 CLE Q:01 ctrl:0000060a prop:00000001 ff: MASK >= 00000000 Q:00 ctrl:00000020 prop:00000000 (Entire cluster gets AND-ed together). (3) We observed that the masking rules it generates do not play well with clustering on P2020. Only first rule of the cluster would ever fire. Given that optimizer relies heavily on masking this is very hard to fix. Example: # ethtool -N eth2 flow-type udp4 dst-ip 10.0.0.1 dst-port 1 action 1 Added rule with ID 254 # ethtool -N eth2 flow-type udp4 dst-ip 10.0.0.2 dst-port 2 action 9 Added rule with ID 253 # ethtool -N eth2 flow-type udp4 dst-ip 10.0.0.3 dst-port 3 action 17 Added rule with ID 252 # ./filer_decode /sys/kernel/debug/gfar1/filer_raw 00: MASK == 00000210 AND Q:00 ctrl:00000080 prop:00000210 01: FPR == 00000210 AND CLE Q:00 ctrl:00000281 prop:00000210 02: MASK == ffffffff AND Q:00 ctrl:00000080 prop:ffffffff 03: DPT == 00000003 AND Q:00 ctrl:0000008e prop:00000003 04: DIA == 0a000003 Q:11 ctrl:0000440c prop:0a000003 05: DPT == 00000002 AND Q:00 ctrl:0000008e prop:00000002 06: DIA == 0a000002 Q:09 ctrl:0000240c prop:0a000002 07: DIA == 0a000001 AND Q:00 ctrl:0000008c prop:0a000001 08: DPT == 00000001 CLE Q:01 ctrl:0000060e prop:00000001 ff: MASK >= 00000000 Q:00 ctrl:00000020 prop:00000000 Which looks correct according to the spec but only the first (eth id 252)/last added rule for 10.0.0.3 will ever trigger. As if filer did not treat the AND CLE as cluster start but also kept AND-ing the rules. We found no errata covering this. The fact that nobody noticed (2) or (3) makes me think that this feature is not very widely used and we should just remove it. Reported-by: Aleksander Dutkowski <adutkowski@gmail.com> Signed-off-by: Jakub Kicinski <kubakici@wp.pl> Acked-by: Claudiu Manoil <claudiu.manoil@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jakub Kicinski authored
At a cost of one line let's make sure .count is correct when calling gfar_process_filer_changes(). Signed-off-by: Jakub Kicinski <kubakici@wp.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jakub Kicinski authored
MAX_FILER_IDX is the last usable index. Using less-than will already guarantee that one entry for catch-all rule will be left, no need to subtract 1 here. Signed-off-by: Jakub Kicinski <kubakici@wp.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Venkat Venkatsubra authored
When the first slave is added (such as during bootup) the first gratuitous ARP gets dropped. We don't see this drop during a failover. The packet gets dropped in qdisc (noop_enqueue). The fix is to delay the sending of gratuitous ARPs till the bond dev's carrier is present. It can also be worked around by setting num_grat_arp to more than 1. Signed-off-by: Venkat Venkatsubra <venkat.x.venkatsubra@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Florian Fainelli authored
In case we need to divert reads/writes using the slave MII bus, we may have already fetched a valid PHY interface property from Device Tree, and that mode is used by the PHY driver to make configuration decisions. If we could not fetch the "phy-mode" property, we will assign p->phy_interface to PHY_INTERFACE_MODE_NA, such that we can actually check for that condition as to whether or not we should override the interface value. Fixes: 19334920 ("net: dsa: Set valid phy interface type") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linuxLinus Torvalds authored
Pull arm64 fix from Catalin Marinas: "Fix coarse clock monotonicity (VDSO timestamp off by one jiffy compared to the syscall one)" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: VDSO: fix coarse clock monotonicity regression
-
git://people.freedesktop.org/~agd5f/linuxLinus Torvalds authored
Pull amd drm fixes from Alex Deucher: "Dave is on vacation at the moment, so please pull these radeon and amdgpu fixes directly. Just a few minor things for 4.2: - add a new radeon pci id - fix a power management regression in amdgpu - fix HEVC command buffer validation in amdgpu" * 'drm-fixes-4.2' of git://people.freedesktop.org/~agd5f/linux: drm/radeon: add new OLAND pci id Revert "drm/amdgpu: Configure doorbell to maximum slots" drm/amdgpu: add context buffer size check for HEVC
-
Alex Deucher authored
Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
-
Alex Deucher authored
This reverts commit 78ad5cdd. This commit breaks dpm and suspend/resume on CZ.
-
Boyuan Zhang authored
Signed-off-by: Boyuan Zhang <boyuan.zhang@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmapLinus Torvalds authored
Pull regmap fix from Mark Brown: "regmap: Fix handling of present bits on rbtree cache block resize When expanding a cache block we use krealloc() to resize the register present bitmap without initialising the newly allocated data (the original code was written for kzalloc()). Add an appropraite memset() to fix that" * tag 'regmap-fix-v4.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap: regmap: regcache-rbtree: Clean new present bits on present bitmap resize
-
Yi Zhang authored
When creating dm-cache with the default policy, it will call request_module("dm-cache-default") to register the default policy. But the "dm-cache-default" alias was left referring to the MQ policy. Fix this by moving the module alias to SMQ. Fixes: bccab6a0 (dm cache: switch the "default" cache replacement policy from mq to smq) Signed-off-by: Yi Zhang <yizhan@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
-
Joe Thornber authored
When using nested btrees, the top leaves of the top levels contain block addresses for the root of the next tree down. If we shadow a shared leaf node the leaf values (sub tree roots) should be incremented accordingly. This is only an issue if there is metadata sharing in the top levels. Which only occurs if metadata snapshots are being used (as is possible with dm-thinp). And could result in a block from the thinp metadata snap being reused early, thus corrupting the thinp metadata snap. Signed-off-by: Joe Thornber <ejt@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Cc: stable@vger.kernel.org
-
Joe Thornber authored
The device details and mapping trees were just being decremented before. Now btree_del() is called to do a deep delete. Signed-off-by: Joe Thornber <ejt@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Cc: stable@vger.kernel.org
-
- 11 Aug, 2015 3 commits
-
-
Linus Torvalds authored
Merge tag 'localmodconfig-v4.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-kconfig Pull localmodconfig fix from Steven Rostedt: "Leonidas Spyropoulos found that modules like nouveau were being unselected by make localmodconfig even though their configs were set and the module was loaded and visible by lsmod. The reason for this was because streamline-config.pl only looks at Makefiles, and not Kbuild files. As these modules use Kbuild for their names, they too need to be checked by localmodconfig. This was fixed by Richard Weinberger" * tag 'localmodconfig-v4.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-kconfig: localmodconfig: Use Kbuild files too
-
Richard Weinberger authored
In kbuild it is allowed to define objects in files named "Makefile" and "Kbuild". Currently localmodconfig reads objects only from "Makefile"s and misses modules like nouveau. Link: http://lkml.kernel.org/r/1437948415-16290-1-git-send-email-richard@nod.at Cc: stable@vger.kernel.org Reported-and-tested-by: Leonidas Spyropoulos <artafinde@gmail.com> Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetoothDavid S. Miller authored
Johan Hedberg says: ==================== pull request: bluetooth 2015-08-11 Here's an important regression fix for the 4.2-rc series that ensures user space isn't given invalid LTK values. The bug essentially prevents the encryption of subsequent LE connections, i.e. makes it impossible to pair devices over LE. Let me know if there are any issues pulling. Thanks. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-