- 26 Jul, 2010 7 commits
-
-
Jesse Barnes authored
We're really supposed to do this to avoid trouble with underflows when multiple planes are active. Fixes https://bugs.freedesktop.org/show_bug.cgi?id=26987. Signed-off-by:
Jesse Barnes <jbarnes@virtuousgeek.org> Tested-by:
fangxun <xunx.fang@intel.com> Signed-off-by:
Eric Anholt <eric@anholt.net>
-
Chris Wilson authored
This fixes a potential modesetting error during boot with plymouth on Broadwater and Crestline introduced with 9df47c. The framebuffer was hard-coding an alignment of 64K, but the modesetting code required the documented alignment of 128K. The result was that we would attempt to unbind the pinned fbcon buffer, triggering an ERROR and ultimately failing the mode change. Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
-
Jesse Barnes authored
When enabling the eDP port, we need to make sure the panel is turned on after training the link. If we don't, it likely won't come back after suspend or may not come up at all. For unknown reasons, unlocking the panel regs before initiating a power on sequence is necessary. There are known bugs in the PCH panel sequencing logic, apparently this is one possible workaround. Fixes https://bugs.freedesktop.org/show_bug.cgi?id=28739. Signed-off-by:
"Paulo J. S. Silva" <pjssilva@gmail.com> Signed-off-by:
-
Jesse Barnes authored
In some cases, unlocking the panel regs is safe and can help us avoid a flickery, full mode set sequence. So define the unlock key and use it. Signed-off-by:
-
Adam Jackson authored
Fixes an Ironlake laptop with a 68.940MHz 1280x800 panel and 120MHz SSC reference clock. More generally, the 0.488% tolerance used before is just too tight to reliably find a PLL setting. I extracted the search algorithm and modified it to find the dot clocks with maximum error over the valid range for the given output type: http://people.freedesktop.org/~ajax/intel_g4x_find_best_pll.c This gave: Worst dotclock for Ironlake DAC refclk is 350000kHz (error 0.00571) Worst dotclock for Ironlake SL-LVDS refclk is 102321kHz (error 0.00524) Worst dotclock for Ironlake DL-LVDS refclk is 219642kHz (error 0.00488) Worst dotclock for Ironlake SL-LVDS SSC refclk is 84374kHz (error 0.00529) Worst dotclock for Ironlake DL-LVDS SSC refclk is 183035kHz (error 0.00488) Worst dotclock for G4X SDVO refclk is 267600kHz (error 0.00448) Worst dotclock for G4X HDMI refclk is 334400kHz (error 0.00478) Worst dotclock for G4X SL-LVDS refclk is 95571kHz (error 0.00449) Worst dotclock for G4X DL-LVDS refclk is 224000kHz (error 0.00510) Signed-off-by:
Adam Jackson <ajax@redhat.com> Cc: stable@kernel.org Signed-off-by:
-
Chris Wilson authored
We cannot the initial configuration set by the BIOS not to have a dither mode enabled which conflicts with our enabling the Spatial Temporal 1 dither mode for PCH. In particular, the BIOS may either enable temporal dithering or the Spatial Temporal 2 with the result that we enable pure temporal dithering. Temporal dithering looks bad and is perceived as a flicker. Fixes: Bug 29248 - [Arrandale] Annoying flicker on internal panel, goes away after suspend to RAM https://bugs.freedesktop.org/show_bug.cgi?id=29248Signed-off-by: -
Jesse Barnes authored
If a framebuffer is shared across CRTCs, the x,y position of one of them is likely to be something other than the origin (e.g. for extended desktop configs). So calculate the offset at flip time so such configurations can work. Fixes https://bugs.freedesktop.org/show_bug.cgi?id=28518. Signed-off-by:
Thomas M. <tmezzadra@gmail.com> Tested-by:
-
- 05 Jul, 2010 10 commits
-
-
Chris Wilson authored
Oops, when merging the extra details following an OOM, I missed that driver_private is now NULL and the correct way to convert from the drm_gem_object into the drm_i915_gem_object is to use to_intel_bo(). BUG: unable to handle kernel NULL pointer dereference at 00000069 IP: [<c11a4a02>] i915_gem_do_execbuffer+0x71f/0xbb6 *pde = 00000000 Oops: 0000 [#1] SMP last sysfs file: /sys/devices/virtual/vc/vcsa3/uevent Pid: 10993, comm: X Not tainted 2.6.35-rc2+ #67 / EIP: 0060:[<c11a4a02>] EFLAGS: 00213202 CPU: 0 EIP is at i915_gem_do_execbuffer+0x71f/0xbb6 EAX: f647e8a8 EBX: 00000000 ECX: 00000003 EDX: 00000000 ESI: 00424000 EDI: 00000000 EBP: f6508e48 ESP: f6508dd4 DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068 Process X (pid: 10993, ti=f6508000 task=f6432880 task.ti=f6508000) Stack: f6508de0 f7130000 00000001 00000000 00000000 f647e8a8 00000000 f64f8480 <0> f7974414 00000000 00000006 00000000 00000000 f6578000 00000008 00000006 <0> f6797880 00400000 00000000 ffffffe4 f7974400 000000d0 000000d0 000001c0 Call Trace: [<c11a4f3a>] ? i915_gem_execbuffer2+0xa1/0xe7 [<c118ab96>] ? drm_ioctl+0x22c/0x2fa [<c11a4e99>] ? i915_gem_execbuffer2+0x0/0xe7 [<c107e88c>] ? do_sync_read+0x8f/0xca [<c1088cbd>] ? vfs_ioctl+0x2c/0x96 [<c118a96a>] ? drm_ioctl+0x0/0x2fa [<c10891f4>] ? do_vfs_ioctl+0x429/0x45a [<c107e5c9>] ? fsnotify_access+0x54/0x5f [<c107ee1c>] ? vfs_read+0x9a/0xae [<c1089258>] ? sys_ioctl+0x33/0x4d [<c1002610>] ? sysenter_do_call+0x12/0x26 Code: d0 89 4d c4 31 c9 89 45 d8 eb 44 8b 45 cc 8b 14 88 8b 42 50 89 45 bc 8b 45 a0 8b 52 38 89 55 d0 31 d2 f6 40 20 01 74 0d 8b 55 bc <f6> 42 69 30 0f 95 c2 0f b6 d2 8b 45 d0 c7 45 d4 00 00 00 00 89 EIP: [<c11a4a02>] i915_gem_do_execbuffer+0x71f/0xbb6 SS:ESP 0068:f6508dd4 CR2: 0000000000000069 ---[ end trace 3f1d514b34d39381 ]--- Signed-off-by:
-
Thomas Bächler authored
On some machines (currently only the Toshiba Tecra A11 is known), the GPU locks up when modeset is forced on LID open. This patch adds a new DMI blacklist and omits modesetting for all matches. Fixes https://bugzilla.kernel.org/show_bug.cgi?id=15550Signed-off-by:
Thomas Bächler <thomas@archlinux.org> Signed-off-by:
-
Linus Torvalds authored
-
Linus Torvalds authored
* master.kernel.org:/home/rmk/linux-2.6-arm: ARM: 6205/1: perf: ensure counter delta is treated as unsigned ARM: 6202/1: Do not ARM_DMA_MEM_BUFFERABLE on RealView boards with L210/L220 ARM: 6201/1: RealView: Do not use outer_sync() on ARM11MPCore boards with L220 ARM: 6195/1: OMAP3: pmu: make CPU_HAS_PMU dependent on OMAP3_EMU ARM: 6194/1: change definition of cpu_relax() for ARM11MPCore ARM: 6193/1: RealView: Align the machine_desc.phys_io to 1MB section ARM: 6192/1: VExpress: Align the machine_desc.phys_io to 1MB section ARM: 6188/1: Add a config option for the ARM11MPCore DMA cache maintenance workaround ARM: 6187/1: The v6_dma_inv_range() function must preserve data on SMP ARM: 6186/1: Avoid the CONSISTENT_DMA_SIZE warning on noMMU builds ARM: mx3: mx31lilly: fix build error for !CONFIG_USB_ULPI [ARM] mmp: fix build failure due to IRQ_PMU depends on ARCH_PXA [ARM] pxa/mioa701: fix camera regression [ARM] pxa/z2: fix flash layout to final version [ARM] pxa/z2: fix missing include in battery driver [ARM] pxa: fix incorrect gpio type in udc_pxa2xx.h
-
Linus Torvalds authored
Merge branch 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: perf, x86: Fix incorrect branches event on AMD CPUs perf tools: Fix find tids routine by excluding "." and ".." x86: Send a SIGTRAP for user icebp traps
-
Yehuda Sadeh authored
We should initialize the module dynamic debug datastructures only after determining that the module is not loaded yet. This fixes a bug that introduced in 2.6.35-rc2, where when a trying to load a module twice, we also load it's dynamic printing data twice which causes all sorts of nasty issues. Also handle the dynamic debug cleanup later on failure. Signed-off-by:
Yehuda Sadeh <yehuda@hq.newdream.net> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> (removed a #ifdef) Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
git://oss.sgi.com/xfs/xfsLinus Torvalds authored
* 'for-linus' of git://oss.sgi.com/xfs/xfs: xfs: remove block number from inode lookup code xfs: rename XFS_IGET_BULKSTAT to XFS_IGET_UNTRUSTED xfs: validate untrusted inode numbers during lookup xfs: always use iget in bulkstat xfs: prevent swapext from operating on write-only files
-
git://git.secretlab.ca/git/linux-2.6Linus Torvalds authored
* 'merge-devicetree' of git://git.secretlab.ca/git/linux-2.6: of/dma: fix build breakage in ppc4xx adma driver
-
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/i7coreLinus Torvalds authored
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/i7core: MAINTAINERS: Add an entry for i7core_edac i7core_edac: Avoid doing multiple probes for the same card i7core_edac: Properly discover the first QPI device
-
git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6Linus Torvalds authored
* 'rc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6: kbuild: Propagate LOCALVERSION= down to scripts/setlocalversion kbuild: Clean up and speed up the localversion logic
-
- 04 Jul, 2010 1 commit
-
-
Will Deacon authored
Hardware performance counters on ARM are 32-bits wide but atomic64_t variables are used to represent counter data in the hw_perf_event structure. The armpmu_event_update function right-shifts a signed 64-bit delta variable and adds the result to the event count. This can lead to shifting in sign-bits if the MSB of the 32-bit counter value is set. This results in perf output such as: Performance counter stats for 'sleep 20': 18446744073460670464 cycles <-- 0xFFFFFFFFF12A6000 7783773 instructions # 0.000 IPC 465 context-switches 161 page-faults 1172393 branches 20.154242147 seconds time elapsed This patch ensures that the delta value is treated as unsigned so that the right shift sets the upper bits to zero. Cc: <stable@kernel.org> Acked-by:Jamie Iles <jamie.iles@picochip.com> Signed-off-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
Russell King <rmk+kernel@arm.linux.org.uk>
-
- 03 Jul, 2010 1 commit
-
-
Vince Weaver authored
While doing some performance counter validation tests on some assembly language programs I noticed that the "branches:u" count was very wrong on AMD machines. It looks like the wrong event was selected. Signed-off-by:
Vince Weaver <vweaver1@eecs.utk.edu> Acked-by:
Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Robert Richter <robert.richter@amd.com> Cc: Borislav Petkov <borislav.petkov@amd.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: <stable@kernel.org> LKML-Reference: <alpine.DEB.2.00.1007011526010.23160@cl320.eecs.utk.edu> Signed-off-by:
Ingo Molnar <mingo@elte.hu>
-
- 02 Jul, 2010 15 commits
-
-
Dan Williams authored
Convert ppc4xx adma driver to use new node pointer location Signed-off-by:
Dan Williams <dan.j.williams@intel.com> Acked-by:
Anatolij Gustschin <agust@denx.de> Signed-off-by:
Grant Likely <grant.likely@secretlab.ca>
-
Mauro Carvalho Chehab authored
While here, fixes the mailing list for i5400_edac Acked-by:
Doug Thompson <dougthompson@xmission.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@redhat.com>
-
Mauro Carvalho Chehab authored
As Nehalem/Nehalem-EP/Westmere devices uses several devices for the same functionality (memory controller), the default way of proping devices doesn't work. So, instead of a per-device probe, all devices should be probed at once. This means that we should block any new attempt of probe, otherwise, it will try to register the same device several times. Acked-by:
-
Mauro Carvalho Chehab authored
On Nehalem/Nehalem-EP/Westmere, the first QPI device is the last PCI bus. The last bus is generally at 0x3f or 0xff, but there are also other systems using different setups. For example, HP Z800 has 0x7f as the last bus. This patch adds a logic to discover the last bus, dynamically detecting it at runtime. Acked-by:
-
Linus Torvalds authored
Merge branch 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: sched: Cure nr_iowait_cpu() users init: Fix comment init, sched: Fix race between init and kthreadd
-
git://git.kernel.org/pub/scm/linux/kernel/git/bp/bpLinus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp: amd64_edac: Fix syndrome calculation on K8
-
Borislav Petkov authored
When calculating the DCT channel from the syndrome we need to know the syndrome type (x4 vs x8). On F10h, this is read out from extended PCI cfg space register F3x180 while on K8 we only support x4 syndromes and don't have extended PCI config space anyway. Make the code accessing F3x180 F10h only and fall back to x4 syndromes on everything else. Cc: <stable@kernel.org> # .33.x .34.x Reported-by:
Jeffrey Merkey <jeffmerkey@gmail.com> Signed-off-by:
Borislav Petkov <borislav.petkov@amd.com>
-
Michal Marek authored
Conflicts: Makefile
-
Catalin Marinas authored
RealView boards with certain revisions of the L210/L220 cache controller may have issues (hardware deadlock) with the mandatory barriers (DSB followed by an L2 cache sync) when ARM_DMA_MEM_BUFFERABLE is enabled. The patch disables ARM_DMA_MEM_BUFFERABLE for these boards. Tested-by:
Linus Walleij <linus.walleij@stericsson.com> Signed-off-by:
Catalin Marinas <catalin.marinas@arm.com> Signed-off-by:
-
Catalin Marinas authored
RealView boards with certain revisions of the L220 cache controller (ARM11* processors only) may have issues (hardware deadlock) with the recent changes to the mb() barrier implementation (DSB followed by an L2 cache sync). The patch redefines the RealView ARM11MPCore mandatory barriers without the outer_sync() call. Cc: <stable@kernel.org> Tested-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/anholt/drm-intelLinus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/anholt/drm-intel: drm/i915: fix page flip finish vs. prepare on plane B drm/i915: change default panel fitting mode to preserve aspect ratio drm/i915: fix uninitialized variable warning in i915_setup_compression() drm/i915: take struct_mutex in i915_dma_cleanup() drm/i915: Fix CRT hotplug regression in 2.6.35-rc1 i915: fix ironlake edp panel setup (v4) drm/i915: don't access FW_BLC_SELF on 965G drm/i915: Account for space on the ring buffer consumed whilst wrapping. drm/i915: gen3 page flipping fixes drm/i915: don't queue flips during a flip pending event drm/i915: Fix incorrect intel_ring_begin size in BSD ringbuffer. drm/i915: Turn on 945 self-refresh only if single CRTC is active drm/i915/gen4: Fix interrupt setup ordering drm/i915: Use RSEN instead of HTPLG for tfp410 monitor detection. drm/i915: Move non-phys cursors into the GTT Revert "drm/i915: Don't enable pipe/plane/VCO early (wait for DPMS on)." (Included the "fix page flip finish vs. prepare on plane B" patch from Jesse on top of the pull request from Eric. -- Linus)
-
Jesse Barnes authored
The refreshed patch had a copy & paste bug. Reported-by:
Simon Farnsworth <simon.farnsworth@onelan.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-devLinus Torvalds authored
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: ata_generic: implement ATA_GEN_* flags and force enable DMA on MBP 7,1 ahci,ata_generic: let ata_generic handle new MBP w/ MCP89 libahci: Fix bug in storing EM messages
-
Daniel J Blueman authored
When booting 2.6.35-rc3 on a x86 system without an ERST ACPI table with the 'quiet' option, we still observe an "ERST: Table is not found!" warning. Quiesce it to the same info log level as the other 'table not found' warnings. Signed-off-by:
Daniel J Blueman <daniel.blueman@gmail.com> Signed-off-by:
-
Linus Torvalds authored
Since commit 4bdadb97 ("drm/i915: Selectively enable self-reclaim"), we've been passing GFP_MOVABLE to the i915 page allocator where we weren't before due to some over-eager removal of the page mapping gfp_flags games the code used to play. This caused hibernate on Intel hardware to result in a lot of memory corruptions on resume. See for example http://bugzilla.kernel.org/show_bug.cgi?id=13811 Reported-by: Evengi Golov (in bugzilla) Signed-off-by:
Dave Airlie <airlied@redhat.com> Tested-by:
M. Vefa Bicakci <bicave@superonline.com> Cc: stable@kernel.org Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Hugh Dickins <hugh.dickins@tiscali.co.uk> Signed-off-by:
-
- 01 Jul, 2010 6 commits
-
-
Jesse Barnes authored
We did this a long time ago in the DDX driver, but now this fix belongs in the kernel. Preserving the aspect ratio is a nicer default. Fixes https://bugs.freedesktop.org/show_bug.cgi?id=18033. Tested-by:
Josh Triplett <josh@freedesktop.org> Signed-off-by:
-
Prarit Bhargava authored
Fixes: drivers/gpu/drm/i915/i915_dma.c: In function ‘i915_setup_compression’: drivers/gpu/drm/i915/i915_dma.c:1311: error: ‘compressed_llb’ may be used uninitialized in this function Signed-off-by:
Prarit Bhargava <prarit@redhat.com> Signed-off-by:
-
Dan Carpenter authored
intel_cleanup_ring_buffer() calls drm_gem_object_unreference() (as opposed to drm_gem_object_unreference_unlocked()) so it needs to be called with "struct_mutex" held. If we don't hold the lock, it triggers a BUG_ON(!mutex_is_locked(&dev->struct_mutex)); I also audited the other places that call intel_cleanup_ring_buffer() and they all hold the lock so they're OK. This was introduced in: 8187a2b7 "drm/i915: introduce intel_ring_buffer structure (V2)" and it's a regression from v2.6.34. Addresses: https://bugzilla.kernel.org/show_bug.cgi?id=16247Signed-off-by:
Dan Carpenter <error27@gmail.com> Reported-by:
Benny Halevy <bhalevy@panasas.com> Tested-by:
-
Andy Lutomirski authored
Commit 7a772c49 has two bugs which made the hotplug problems on my laptop worse instead of better. First, it did not, in fact, disable the CRT plug interrupt -- it disabled all the other hotplug interrupts. It seems rather doubtful that that bit of the patch fixed anything, so let's just remove it. (If you want to add it back, you probably meant ~CRT_HOTPLUG_INT_EN.) Second, on at least my GM45, setting CRT_HOTPLUG_ACTIVATION_PERIOD_64 and CRT_HOTPLUG_VOLTAGE_COMPARE_50 (when they were previously unset) causes a hotplug interrupt about three seconds later. The old code never restored PORT_HOTPLUG_EN so this could only happen once, but they new code restores those registers. So just set those bits when we set up the interrupt in the first place. Signed-off-by:
Andy Lutomirski <luto@mit.edu> Signed-off-by:
-
Dave Airlie authored
The eDP spec claims a 20% overhead for the 8:10 encoding scheme used on the wire. Take this into account when picking the lane/clock speed for the panel. v3: some panels are out of spec, try our best to deal with them, don't refuse modes on eDP panels, and try the largest allowed settings if all else fails on eDP. v4: fix stupid typo, forgot to git add before amending. Fixes several reports in bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=28070Signed-off-by: -
Jesse Barnes authored
The register offset for FW_BLC_SELF is a totally different set of bits on Broadwater (it's actually MI_RDRET_STATE), so don't treat it like FW_BLC_SELF on 965G chips. Fixes bug https://bugs.freedesktop.org/show_bug.cgi?id=26874. Cc: stable@kernel.org Tested-by:
Norman Yarvin <yarvin@yarchive.net> Signed-off-by:
-
