- 20 Jun, 2013 40 commits
-
-
Gavin Shan authored
The patch adds the I/O chip backend to do PE reset. For now, we focus on PCI bus dependent PE. If PHB PE has been put into error state, the PHB will take complete reset. Besides, the root bridge will take fundamental or hot reset accordingly if the indicated PE locates at the toppest of PCI hierarchy tree. Otherwise, the upstream p2p bridge will take hot reset. Signed-off-by:
Gavin Shan <shangw@linux.vnet.ibm.com> Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
Gavin Shan authored
The patch adds I/O chip backend to retrieve the state for the indicated PE. While the PE state is temperarily unavailable, the upper layer (powernv platform) should return default delay (1 second). Signed-off-by:
-
Gavin Shan authored
The patch adds the backend to enable or disable EEH functionality for the specified PE. The backend is also used to enable MMIO or DMA path for the problematic PE. It's notable that all PEs on PowerNV platform support EEH functionality by default, and we disallow to disable EEH for the specific PE. Signed-off-by:
-
Gavin Shan authored
The post initialization (struct eeh_ops::post_init) is called after the EEH probe is done. On the other hand, the EEH core post initialization is designed to call platform and then I/O chip backend on PowerNV platform. The patch adds the backend for I/O chip to notify the platform that the specific PHB is ready to supply EEH service. Signed-off-by:
-
Gavin Shan authored
For EEH on PowerNV platform, the overall architecture is different from that on pSeries platform. In order to support multiple I/O chips in future, we split EEH to 3 layers for PowerNV platform: EEH core, platform layer, I/O layer. It would give EEH implementation on PowerNV platform much more flexibility in future. The patch adds the EEH backend for P7IOC. Signed-off-by:
-
Gavin Shan authored
The patch synchronizes OPAL APIs between kernel and firmware. Also, we starts to replace opal_pci_get_phb_diag_data() with the similar opal_pci_get_phb_diag_data2() and the former OPAL API would return OPAL_UNSUPPORTED from now on. Signed-off-by:
-
Gavin Shan authored
On PowerNV platform, the EEH event caused by interrupt won't have binding PE. The patch enables EEH core to handle the special event. To avoid the current logic we have, The eeh_handle_event() is renamed to eeh_handle_normal_event(), and the eeh_handle_special_event() is introduced. The function eeh_handle_event() dispatches to above two functions according to the input parameter. Besides, new backend "next_error" added to eeh_ops and it's expected to have following return values: 4 - Dead IOC 3 - Dead PHB 2 - Fenced PHB 1 - Frozen PE 0 - No error found Signed-off-by: -
Gavin Shan authored
An EEH event is created and queued to the event queue for each ingress EEH error. When there're mutiple EEH errors, we need serialize the process to keep consistent PE state (flags). The spinlock "confirm_error_lock" was introduced for the purpose. We'll inject EEH event upon error reporting interrupts on PowerNV platform. So we export the spinlock for that to use for consistent PE state. Signed-off-by:
-
Gavin Shan authored
On PowerNV platform, we might run into the situation where subsequent events are duplicated events of former one, which is being processed. For the case, we need the function implemented by the patch to purge EEH events accordingly. Signed-off-by:
-
Gavin Shan authored
We're not expecting that one specific PE got frozen for over 5 times in last hour. Otherwise, the PE will be removed from the system upon newly coming EEH errors. The patch introduces time stamp to trace the first error on specific PE in last hour and function to update that accordingly. Besides, the time stamp is recovered during PE hotplug path as we did for frozen count. Signed-off-by:
-
Gavin Shan authored
We possiblly have multiple kthreads running for multiple EEH errors (events) and use one spinlock to make the process of handling those EEH events serialized. That's unnecessary and the patch creates only one kthread, which is started during EEH core initialization time in eeh_init(). A new semaphore introduced to count the number of existing EEH events in the queue and the kthread waiting on the semaphore. Signed-off-by:
-
Gavin Shan authored
While doing EEH recovery, the PCI devices of the problematic PE should be removed and then added to the system again. During the so-called hotplug event, the PCI devices of the problematic PE will be probed through early/late phase. We would delay EEH probe on late point for PowerNV platform since the PCI device isn't available in early phase. Signed-off-by:
-
Gavin Shan authored
We shouldn't check that the returned PE status is exactly equal to (EEH_STATE_MMIO_ACTIVE | EEH_STATE_DMA_ACTIVE) but instead only check that they are both set. [benh: changelog] Signed-off-by:
-
Gavin Shan authored
The patch adds new EEH operation post_init. It's used to notify the platform that EEH core has completed the EEH probe. By that, PowerNV platform starts to use the services supplied by EEH functionality. Signed-off-by:
-
Gavin Shan authored
For EEH on PowerNV platform, we will do EEH probe based on the real PCI devices. The PCI devices are available after PCI probe. So we have to call eeh_init() explicitly on PowerNV platform after PCI probe. The patch also does EEH probe for PowerNV platform in eeh_init(). Signed-off-by:
-
Gavin Shan authored
There're several types of PEs can be supported for now: PHB, Bus and Device dependent PE. For PCI bus dependent PE, tracing the corresponding PCI bus from PE (struct eeh_pe) would make the code more efficient. The patch also enables the retrieval of PCI bus based on the PCI bus dependent PE. Signed-off-by:
-
Gavin Shan authored
While processing EEH event interrupt from P7IOC, we need function to retrieve the PE according to the indicated EEH device. The patch makes function eeh_pe_get() public so that other source files can call it for that purpose. Also, the patch fixes referring to wrong BDF (Bus/Device/Function) address while searching PE in function __eeh_pe_get(). Signed-off-by:
-
Gavin Shan authored
One of the possible cases indicated by P7IOC interrupt is fenced PHB. For that case, we need fetch the PE corresponding to the PHB and disable the PHB and all subordinate PCI buses/devices, recover from the fenced state and eventually enable the whole PHB. We need one function to fetch the PHB PE outside eeh_pe.c and the patch is going to make eeh_phb_pe_get() public for that purpose. Signed-off-by:
-
Gavin Shan authored
The patch moves the common part of EEH core into arch/powerpc/kernel directory so that we needn't PPC_PSERIES while compiling POWERNV platform: * Move the EEH common part into arch/powerpc/kernel * Move the functions for PCI hotplug from pSeries platform to arch/powerpc/kernel/pci-hotplug.c * Move CONFIG_EEH from arch/powerpc/platforms/pseries/Kconfig to arch/powerpc/platforms/Kconfig * Adjust makefile accordingly Signed-off-by: -
Gavin Shan authored
Cleanup on EEH core to remove unnecessary whitespaces. Signed-off-by:
-
Michael Neuling authored
Currently we only restore signals which are transactionally suspended but it's possible that the transaction can be restored even when it's active. Most likely this will result in a transactional rollback by the hardware as the transaction will have been doomed by an earlier treclaim. The current code is a legacy of earlier kernel implementations which did software rollback of active transactions in the kernel. That code has now gone but we didn't correctly fix up this part of the signals code which still makes assumptions based on having software rollback. This changes the signal return code to always restore both contexts on 64 bit signal return. It also ensures that the MSR TM bits are properly restored from the signal context which they are not currently. Signed-off-by:
Michael Neuling <mikey@neuling.org> cc: stable@vger.kernel.org (v3.9+) Signed-off-by:
-
Michael Neuling authored
Currently we only restore signals which are transactionally suspended but it's possible that the transaction can be restored even when it's active. Most likely this will result in a transactional rollback by the hardware as the transaction will have been doomed by an earlier treclaim. The current code is a legacy of earlier kernel implementations which did software rollback of active transactions in the kernel. That code has now gone but we didn't correctly fix up this part of the signals code which still makes assumptions based on having software rollback. This changes the signal return code to always restore both contexts on 32 bit rt signal return. Signed-off-by:
-
Michael Neuling authored
Currently we clear out the MSR TM bits on signal return assuming that the signal should never return to an active transaction. This is bogus as the user may do this. It's most likely the transaction will be doomed due to a treclaim but that's a problem for the HW not the kernel. The current code is a legacy of earlier kernel implementations which did software rollback of active transactions in the kernel. That code has now gone but we didn't correctly fix up this part of the signals code which still makes the assumption that it must be returning to a suspended transaction. This pulls out both MSR TM bits from the user supplied context rather than just setting TM suspend. We pull out only the bits needed to ensure the user can't do anything dangerous to the MSR. Signed-off-by:
-
Michael Neuling authored
Currently sys_sigreturn() is TM unaware. Therefore, if we take a 32 bit signal without SIGINFO (non RT) inside a transaction, on signal return we don't restore the signal frame correctly. This checks if the signal frame being restoring is an active transaction, and if so, it copies the additional state to ptregs so it can be restored. Signed-off-by:
-
Michael Neuling authored
The MSR TM controls are in the top 32 bits of the MSR hence on 32 bit signals, we stick the top half of the MSR in the checkpointed signal context so that the user can access it. Unfortunately, we don't currently write anything to the checkpointed signal context when coming in a from a non transactional process and hence the top MSR bits can contain junk. This updates the 32 bit signal handling code to always write something to the top MSR bits so that users know if the process is transactional or not and the kernel can use it on signal return. Signed-off-by:
-
Benjamin Herrenschmidt authored
This is duplicated code from math-emu and implements such a small subset of the FPU (load/stores/fmr) that it's essentially pointless nowdays. Signed-off-by: -
Benjamin Herrenschmidt authored
(Including 64-bit ones) This allow SW emulation by the kernel of optional instructions such as fsqrt which aren't implemented on some processors, and thus fixes some Fedora 19 issues such as Anaconda since the compiler is set to generate those by default on 64-bit. Signed-off-by: -
Benjamin Herrenschmidt authored
The decoding of some instructions such as fsqrt{s} was incorrect, using the wrong registers, and thus could not work. This fixes it and also adds a couple of place holders for missing instructions. Signed-off-by: -
Aruna Balakrishnaiah authored
This patch exploits pstore subsystem to read details of common partition in NVRAM to a separate file in /dev/pstore. For instance, common partition details will be stored in a file named [common-nvram-6]. Signed-off-by:
Aruna Balakrishnaiah <aruna@linux.vnet.ibm.com> Reviewed-by:
Jim Keniston <jkenisto@us.ibm.com> Signed-off-by:
-
Aruna Balakrishnaiah authored
This patch set exploits the pstore subsystem to read details of of-config partition in NVRAM to a separate file in /dev/pstore. For instance, of-config partition details will be stored in a file named [of-nvram-5]. Signed-off-by:
-
Aruna Balakrishnaiah authored
Introduce os_partition member in nvram_os_partition structure to identify if the partition is an os partition or not. This will be useful to handle non-os partitions of-config and common. Signed-off-by:
-
Aruna Balakrishnaiah authored
This patch set exploits the pstore subsystem to read details of rtas partition in NVRAM to a separate file in /dev/pstore. For instance, rtas details will be stored in a file named [rtas-nvram-4]. Signed-off-by:
-
Aruna Balakrishnaiah authored
IBM's p series machines provide persistent storage for LPARs through NVRAM. NVRAM's lnx,oops-log partition is used to log oops messages. Currently the kernel provides the contents of p-series NVRAM only as a simple stream of bytes via /dev/nvram, which must be interpreted in user space by the nvram command in the powerpc-utils package. This patch set exploits the pstore subsystem to expose oops partition in NVRAM as a separate file in /dev/pstore. For instance, Oops messages will be stored in a file named [dmesg-nvram-2]. In case pstore registration fails it will fall back to kmsg_dump mechanism. This patch will read/write the oops messages from/to this partition via pstore. Signed-off-by:
-
Aruna Balakrishnaiah authored
Introduce generic read function to read nvram partitions other than rtas. nvram_read_error_log will be retained which is used to read rtas partition from rtasd. nvram_read_partition is the generic read function to read from any nvram partition. Signed-off-by:
-
Aruna Balakrishnaiah authored
Introduce version and timestamp information in the oops header. oops_log_info (oops header) holds version (to distinguish between old and new format oops header), length of the oops text (compressed or uncompressed) and timestamp. The version field will sit in the same place as the length in old headers. version is assigned 5000 (greater than oops partition size) so that existing tools will refuse to dump new style partitions as the length is too large. The updated tools will work with both old and new format headers. Signed-off-by:
-
Aruna Balakrishnaiah authored
Removal of syslog prefix in the uncompressed oops text will help in capturing more oops data. Signed-off-by:
-
Gavin Shan authored
Under some special circumstances, the EEH device doesn't have the associated device tree node or PCI device. The patch enhances those functions converting EEH device to device tree node or PCI device accordingly to avoid unnecessary system crash. Signed-off-by:
-
Gavin Shan authored
While running Linux as guest on top of phyp, we possiblly have PE that includes single PCI device. However, we didn't return its PCI bus correctly and it leads to failure on recovery from EEH errors for single-dev-PE. The patch fixes the issue. Cc: <stable@vger.kernel.org> # v3.7+ Cc: Steve Best <sbest@us.ibm.com> Signed-off-by:
-
Anton Blanchard authored
On newer CPUs we use VSX loads and stores to the thread->fpr array. For best performance we need to ensure 16 byte alignment. Signed-off-by:
Anton Blanchard <anton@samba.org> Signed-off-by:
-
liguang authored
orderly_poweroff is expecting a bool parameter, so use 'true' instead '1' Signed-off-by:
liguang <lig.fnst@cn.fujitsu.com> Signed-off-by:
-
