- 30 Apr, 2008 40 commits
-
-
Alan Cox authored
Push the BKL down into various internal routines in the driver ready to remove it from the break, ioctl and other call points. Signed-off-by:
Alan Cox <alan@redhat.com> Cc: Jiri Slaby <jirislaby@gmail.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Alan Cox authored
This is an ancient driver so just wrap it in lock_kernel internally and be done. Signed-off-by:
-
Alan Cox authored
Again lock the bits we can't trivially prove are safe without the BKL and remove the broken TIOCS/GSOFTCAR handler. Signed-off-by:
-
Alan Cox authored
Push the BKL down into a few internal bits of code in this driver. Signed-off-by:
-
Alan Cox authored
Prepare epca for removing the lock from above. Most of epca is internally locked so we can trivially push it down to a few bits of code. Drop the TIOCG/SSOFTCAR handling as that is done *properly* with locks by the mid layer. Signed-off-by:
-
Alan Cox authored
Basically wrap it in lock_kernel where it is hard to prove the locking is ok. Signed-off-by:
-
Alan Cox authored
Just wrap this one in a lock_kernel. As I understand it there is no M68K SMP anyway. Signed-off-by:
-
Oleg Nesterov authored
Afaics, currently there are no kernel problems with ptracing init, it can't lose SIGNAL_UNKILLABLE flag and be killed/stopped by accident. The ability to strace/debug init can be very useful if you try to figure out why it does not work as expected. However, admin should know what he does, "gdb /sbin/init 1" stops init, it can't reap orphaned zombies or take care of /etc/inittab until continued. It is even possible to crash init (and thus the whole system) if you wish, ptracer has full control. See also the long discussion: http://marc.info/?t=120628018600001Signed-off-by:
Oleg Nesterov <oleg@tv-sign.ru> Acked-by:
Roland McGrath <roland@redhat.com> Acked-by:
Pavel Emelyanov <xemul@openvz.org> Signed-off-by:
-
Oleg Nesterov authored
Nobody can block/ignore SIGSTOP, no need to use force_sig_specific() in ptrace_attach. Use the "regular" send_sig_info(). With this patch stracing of /sbin/init doesn't clear its SIGNAL_UNKILLABLE, but not that this makes ptracing of init safe. Signed-off-by:
-
Oleg Nesterov authored
Currently __ptrace_unlink() checks list_empty(->ptrace_list) to figure out whether the child was reparented. Change the code to use ptrace_reparented() to make this check more explicit and consistent. No functional changes. Signed-off-by:
-
Oleg Nesterov authored
Add another trivial helper for the sake of grep. It also auto-documents the fact that ->parent != real_parent implies ->ptrace. No functional changes. Signed-off-by:
-
Oleg Nesterov authored
Add a couple of small comments, it is not easy to see what this code does. Signed-off-by:
-
Oleg Nesterov authored
Trivial, use same_thread_group() in reparent_thread(). Signed-off-by:
-
Oleg Nesterov authored
exit.c has numerous "->exit_signal == -1" comparisons, this check is subtle and deserves a helper. Imho makes the code more parseable for humans. At least it's surely more greppable. Also, a couple of whitespace cleanups. No functional changes. Signed-off-by:
-
Roland McGrath authored
Replace TIF_RESTORE_SIGMASK with TS_RESTORE_SIGMASK and define our own set_restore_sigmask() function. This saves the costly SMP-safe set_bit operation, which we do not need for the sigmask flag since TIF_SIGPENDING always has to be set too. Signed-off-by:
-
Roland McGrath authored
Change all the #ifdef TIF_RESTORE_SIGMASK conditionals in non-arch code to #ifdef HAVE_SET_RESTORE_SIGMASK. If arch code defines it first, the generic set_restore_sigmask() using TIF_RESTORE_SIGMASK is not defined. Signed-off-by:
-
akpm@linux-foundation.org authored
TIF_RESTORE_SIGMASK no longer needs to be in the _TIF_WORK_* masks. Those low bits are scarce. Renumber TIF_RESTORE_SIGMASK to free one up. Signed-off-by:
-
Roland McGrath authored
TIF_RESTORE_SIGMASK no longer needs to be in the _TIF_WORK_* masks. Those low bits are scarce, and are all used up now. Renumber TIF_RESTORE_SIGMASK to free one up. Signed-off-by:
-
Roland McGrath authored
Set TIF_SIGPENDING in set_restore_sigmask. This lets arch code take TIF_RESTORE_SIGMASK out of the set of bits that will be noticed on return to user mode. On some machines those bits are scarce, and we can free this unneeded one up for other uses. It is probably the case that TIF_SIGPENDING is always set anyway everywhere set_restore_sigmask() is used. But this is some cheap paranoia in case there is an arcane case where it might not be. Signed-off-by:
-
Roland McGrath authored
This adds the set_restore_sigmask() inline in <linux/thread_info.h> and replaces every set_thread_flag(TIF_RESTORE_SIGMASK) with a call to it. No change, but abstracts the details of the flag protocol from all the calls. Signed-off-by:
-
Oleg Nesterov authored
Currently the buggy /sbin/init hangs if SIGSEGV/etc happens. The kernel sends the signal, init dequeues it and ignores, returns from the exception, repeats the faulting instruction, and so on forever. Imho, such a behaviour is not good. I think that the explicit loud death of the buggy /sbin/init is better than the silent hang. Change force_sig_info() to clear SIGNAL_UNKILLABLE when the task should be really killed. Signed-off-by:
-
Oleg Nesterov authored
Now that we rely on SIGNAL_UNKILLABLE flag, de_thread() doesn't need the nasty hack to kill the old ->child_reaper during the mt-exec. This also means we can avoid taking tasklist_lock around zap_other_threads(). Signed-off-by:
-
Oleg Nesterov authored
The global init has a lot of long standing problems with the unhandled fatal signals. - The "is_global_init(current)" check in get_signal_to_deliver() protects only the main thread. Sub-thread can dequee the fatal signal and shutdown the whole thread group except the main thread. If it dequeues SIGSTOP /sbin/init will be stopped, this is not right too. Note that we can't use is_global_init(->group_leader), this breaks exec and this can't solve other problems we have. - Even if afterwards ignored, the fatal signals sets SIGNAL_GROUP_EXIT on delivery. This breaks exec, has other bad implications, and this is just wrong. Introduce the new SIGNAL_UNKILLABLE flag to fix these problems. It also helps to solve some other problems addressed by the subsequent patches. Currently we use this flag for the global init only, but it could also be used by kthreads and (perhaps) by the sub-namespace inits. Signed-off-by:
"Eric W. Biederman" <ebiederm@xmission.com> Cc: Roland McGrath <roland@redhat.com> Signed-off-by:
-
Oleg Nesterov authored
Now that task_session() can't return a false NULL, check_kill_permission() doesn't need tasklist_lock. Signed-off-by:
-
Oleg Nesterov authored
This wasn't documented, but as Atsushi Tsuji pointed out check_kill_permission() needs tasklist_lock for task_session_nr(). I missed this fact when removed tasklist from the callers. Change check_kill_permission() to take tasklist_lock for the SIGCONT case. Re-order security checks so that we take tasklist_lock only if/when it is actually needed. This is a minimal fix for now, tasklist will be removed later. Also change the code to use task_session() instead of task_session_nr(). Also, remove the SIGCONT check from cap_task_kill(), it is bogus (and the whole function is bogus. Serge, Eric, why it is still alive?). Signed-off-by:
Atsushi Tsuji <a-tsuji@bk.jp.nec.com> Cc: Roland McGrath <roland@redhat.com> Cc: Serge Hallyn <serue@us.ibm.com> Signed-off-by:
-
Oleg Nesterov authored
send_signal() shouldn't call signalfd_notify() if it then fails with -EAGAIN. Harmless, just a paranoid cleanup. Also remove the comment. It is obsolete, signalfd_notify() was simplified and does a simple wakeup. Signed-off-by:
Davide Libenzi <davidel@xmailserver.org> Cc: Roland McGrath <roland@redhat.com> Signed-off-by:
-
Oleg Nesterov authored
A couple of small comments about how CLD_CONTINUED notification works. Signed-off-by:
-
Oleg Nesterov authored
Rename handle_stop_signal() to prepare_signal(), make it return a boolean, and move the callsites of sig_ignored() into it. No functional changes for now. But it would be nice to factor out the "should we drop this signal" checks as much as possible, before we try to fix the bugs with the sub-namespace init's signals (actually the global /sbin/init has some problems with signals too). Signed-off-by:
-
Oleg Nesterov authored
Move the callsite of print_fatal_signal() down, under "if (sig_kernel_coredump(signr))", so we don't need to check signr != SIGKILL. We are only interested in the sig_kernel_coredump() signals anyway, and due to the previous changes we almost never can see other fatal signals here except SIGKILL. Signed-off-by:
-
Oleg Nesterov authored
handle_stop_signal() clears SIGNAL_STOP_DEQUEUED when sig == SIGKILL. Remove this nasty special case. It was needed to prevent the race with group stop and exit caused by thread-specific SIGKILL. Now that we use complete_signal() for private signals too this is not needed, complete_signal() will notice SIGKILL and abort the soon-to-begin group stop. Except: the target thread is dead (has PF_EXITING). But in that case we should not just clear SIGNAL_STOP_DEQUEUED and nothing more. We should either kill the whole thread group, or silently ignore the signal. I suspect we are not right wrt zombie leaders, but this is another issue which and should be fixed separately. Note that this check can't abort the group stop if it was already started/finished, this check only adds a subtle side effect if we race with the thread which has already dequeued sig_kernel_stop() signal and temporary released ->siglock. Signed-off-by:
-
Oleg Nesterov authored
We export send_sigqueue() and send_group_sigqueue() for the only user, posix_timer_event(). This is a bit silly, because both are just trivial helpers on top of do_send_sigqueue() and because the we pass the unused .si_signo parameter. Kill them both, rename do_send_sigqueue() to send_sigqueue(), and export it. Signed-off-by:
-
Oleg Nesterov authored
Suggested by Pavel Emelyanov. send_sigqueue/send_group_sigqueue are only differ in how they lock ->siglock. Unify them. send_group_sigqueue() uses spin_lock() because it knows the task can't exit, but in that case lock_task_sighand() can't fail and doesn't hurt. Note that the "sig" argument is ignored, it is always equal to ->si_signo. Signed-off-by:
-
Pavel Emelyanov authored
Factor out complete_signal() callsites. This change completely unifies the helpers sending the specific/group signals. Signed-off-by:
-
Oleg Nesterov authored
Based on Pavel Emelyanov's suggestion. Rename __group_complete_signal() to complete_signal() and use it to process the specific signals too. To do this we simply add the "int group" argument. This allows us to greatly simply the signal-sending code and adds a useful behaviour change. We can avoid the unneeded wakeups for the private signals because wants_signal() is more clever than sigismember(blocked), but more importantly we now take into account the fatal specific signals too. The latter allows us to kill some subtle checks in handle_stop_signal() and makes the specific/group signal's behaviour more consistent. For example, currently sigtimedwait(FATAL_SIGNAL) behaves differently depending on was the signal sent by kill() or tkill() if the signal was not blocked. And. This allows us to tweak/fix the behaviour when the specific signal is sent to the dying/dead ->group_leader. Signed-off-by:
-
Oleg Nesterov authored
send_signal() is used either with ->pending or with ->signal->shared_pending. Change it to take "int group" instead, this argument will be re-used later. Signed-off-by:
-
Oleg Nesterov authored
Move the unchanged definition of __group_complete_signal() so that send_signal can see it. To simplify the reading of the next patches. Signed-off-by:
-
Oleg Nesterov authored
Suggested by Roland McGrath. Initialize signal->curr_target in copy_signal(). This way ->curr_target is never == NULL, we can kill the check in __group_complete_signal's hot path. Signed-off-by:
-
Oleg Nesterov authored
The comment in send_sig_info() is wrong, tasklist_lock can't help. The caller must ensure the task can't go away, otherwise ->sighand can be NULL even before we take the lock. p->sighand could be changed by exec(), but I can't imagine how it is possible to prevent exit(), but not exec(). Since the things seem to work, I assume all callers are correct. However, drm_vbl_send_signals() looks broken. block_all_signals() which is solely used by drm is definitely broken. Signed-off-by:
-
Oleg Nesterov authored
Convert do_tkill() to use rcu_read_lock() + lock_task_sighand() to avoid taking tasklist lock. Note that we don't return an error if lock_task_sighand() fails, we pretend the task dies after receiving the signal. Otherwise, we should fight with the nasty races with mt-exec without having any advantage. Signed-off-by:
-
Oleg Nesterov authored
Move handle_stop_signal() into send_signal(). This factors out a couple of callsites and allows us to do further unifications. Also, with this change specific_send_sig_info() does handle_stop_signal(). Not that this is really important, we never send STOP/CONT via send_sig() and friends, but still this looks more consistent. The only (afaics) special case is get_signal_to_deliver(). If the traced task dequeues SIGCONT, it can re-send it to itself after ptrace_stop() if the signal was blocked by debugger. In that case handle_stop_signal() is unnecessary, but hopefully not a problem. Signed-off-by:
-
