- 19 Jul, 2012 1 commit
-
-
Shawn Guo authored
The commit 766e6a4e (clk: add DT clock binding support) plugs device tree clk lookup of_clk_get_by_name into clk_get, and fall on non-DT lookup clk_get_sys if DT lookup fails. The return check on of_clk_get_by_name takes (clk != NULL) as a successful DT lookup. But it's not the case. For any system that does not define clk lookup in device tree, ERR_PTR(-ENOENT) will be returned, and consequently, all the client drivers calling clk_get in their probe functions will fail to probe with error code -ENOENT returned. Fix the issue by checking of_clk_get_by_name return with !IS_ERR(clk), and update of_clk_get and of_clk_get_by_name for !CONFIG_OF build correspondingly. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Rob Herring <rob.herring@calxeda.com> Tested-by: Marek Vasut <marex@denx.de> Tested-by: Lauri Hintsala <lauri.hintsala@bluegiga.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
-
- 12 Jul, 2012 10 commits
-
-
-
Richard Zhao authored
Signed-off-by: Richard Zhao <richard.zhao@freescale.com> Tested-by: Subodh Nijsure <snijsure@grid-net.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
-
Rob Herring authored
This adds real clock support to Calxeda Highbank SOC using the common clock infrastructure. Signed-off-by: Rob Herring <rob.herring@calxeda.com> [mturquette@linaro.org: fixed up invalid writes to const struct member] Signed-off-by: Mike Turquette <mturquette@linaro.org>
-
Rob Herring authored
Add clock binding information for primecell peripherals. For most, a clock input name of "apb_pclk" is required. Any primecell peripherals which are different will need to be documented separately. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
-
Grant Likely authored
Add support for DT "fixed-clock" binding to the common fixed rate clock support. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> [Rob Herring] Rework and move into common clock infrastructure Signed-off-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
-
Grant Likely authored
Based on work 1st by Ben Herrenschmidt and Jeremy Kerr, then by Grant Likely, this patch adds support to clk_get to allow drivers to retrieve clock data from the device tree. Platforms scan for clocks in DT with of_clk_init and a match table, and the register a provider through of_clk_add_provider. The provider's clk_src_get function will be called when a device references the provider's OF node for a clock reference. v6 (Rob Herring): - Return error values instead of NULL to match clock framework expectations v5 (Rob Herring): - Move from drivers/of into common clock subsystem - Squashed "dt/clock: add a simple provider get function" and "dt/clock: add function to get parent clock name" - Rebase to 3.4-rc1 - Drop CONFIG_OF_CLOCK and just use CONFIG_OF - Add missing EXPORT_SYMBOL to various functions - s/clock-output-name/clock-output-names/ - Define that fixed-clock binding is a single output v4 (Rob Herring): - Rework for common clk subsystem - Add of_clk_get_parent_name function v3: - Clarified documentation v2: - fixed errant ';' causing compile error - Editorial fixes from Shawn Guo - merged in adding lookup to clkdev - changed property names to match established convention. After working with the binding a bit it really made more sense to follow the lead of 'reg', 'gpios' and 'interrupts' by making the input simply 'clocks' & 'clock-names' instead of 'clock-input-*', and to only use clock-output* for the producer nodes. (Sorry Shawn, this will mean you need to change some code, but it should be trivial) - Add ability to inherit clocks from parent nodes by using an empty 'clock-ranges' property. Useful for busses. I could use some feedback on the new property name, 'clock-ranges' doesn't feel right to me. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Rob Herring <rob.herring@calxeda.com> Reviewed-by: Shawn Guo <shawn.guo@freescale.com> Cc: Sascha Hauer <kernel@pengutronix.de> Signed-off-by: Mike Turquette <mturquette@linaro.org>
-
Linus Walleij authored
This converts the Integrator platform to use common clock and the ICST driver. Since from this point not all ARM reference platforms use the clock, we define CONFIG_PLAT_VERSATILE_CLOCK and select it for all platforms except the Integrator. Open issue: I could not use the .init_early() field of the machine descriptor to initialize the clocks, but had to move them to .init_irq(), so presumably .init_early() is so early that common clock is not up, and .init_machine() is too late since it's needed for the clockevent/clocksource initialization. Any suggestions on how to solve this is very welcome. Cc: Russell King <linux@arm.linux.org.uk> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> [mturquette@linaro.org: use 'select' instead of versatile Kconfig] Signed-off-by: Mike Turquette <mturquette@linaro.org>
-
Linus Walleij authored
The ICST307 VCO clock has a shared driver in the ARM architecture. This patch provides a wrapper into the common clock framework so we can use the implementation in the ARM architecture without duplicating the code until all ARM platforms using this VCO are moved over. At that point we can merge the driver from the ARM platform into the generic file altogether. Cc: Russell King <linux@arm.linux.org.uk> Cc: Mike Turquette <mturquette@ti.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> [mturquette@linaro.org: removed versatile Kconfig] Signed-off-by: Mike Turquette <mturquette@linaro.org>
-
Linus Walleij authored
All the Integrator devices have bus names like "mb:16" which I think means "memory base 0x16000000" which is where the UART0 is. So let's call it "uart0" because that's what most platforms do these days. Change this everywhere for the integrator as we prepare for some core clock code movement. Cc: Russell King <linux@arm.linux.org.uk> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
-
-
- 11 Jul, 2012 7 commits
-
-
Linus Walleij authored
This converts the U300 clock implementation over to use the common struct clk and moves the implementation down into drivers/clk. Since VCO isn't used in tree it was removed, it's not hard to put it back in if need be. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> [mturquette@linaro.org: trivial Makefile conflict] Signed-off-by: Mike Turquette <mturquette@linaro.org>
-
Rajendra Nayak authored
caching parent clocks makes sense only when a clock has more than one parent (mux clocks). Avoid doing this for every other clock. Signed-off-by: Rajendra Nayak <rnayak@ti.com> [mturquette@linaro.org: removed extra parentheses] Signed-off-by: Mike Turquette <mturquette@linaro.org>
-
Mark Brown authored
The WM831x and WM832x series of PMICs contain a flexible clocking subsystem intended to provide always on and system core clocks. It features: - A 32.768kHz crystal oscillator which can optionally be used to pass through an externally generated clock. - A FLL which can be clocked from either the 32.768kHz oscillator or the CLKIN pin. - A CLKOUT pin which can bring out either the oscillator or the FLL output. - The 32.768kHz clock can also optionally be brought out on the GPIO pins of the device. This driver fully supports the 32.768kHz oscillator and CLKOUT. The FLL is supported only in AUTO mode, the full flexibility of the FLL cannot currently be used. Due to a lack of access to systems where the core SoC has been converted to use the generic clock API this driver has been compile tested only. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
-
Mark Brown authored
Allow drivers to declare their clk_init_data const, the framework really shouldn't be modifying the data. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
-
Rajendra Nayak authored
Most platforms end up using a mix of basic clock types and some which use clk_hw_foo struct for filling in custom platform information when the clocks don't fit into basic types supported. In platform code, its useful to know if a clock is using a basic type or clk_hw_foo, which helps platforms know if they can safely use to_clk_hw_foo to derive the clk_hw_foo pointer from clk_hw. Mark all basic clocks with a CLK_IS_BASIC flag. Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
-
Rajendra Nayak authored
Some divider clks do not have any obvious relationship between the divider and the value programmed in the register. For instance, say a value of 1 could signify divide by 6 and a value of 2 could signify divide by 4 etc. Also there are dividers where not all values possible based on the bitfield width are valid. For instance a 3 bit wide bitfield can be used to program a value from 0 to 7. However its possible that only 0 to 4 are valid values. All these cases need the platform code to pass a simple table of divider/value tuple, so the framework knows the exact value to be written based on the divider calculation and can also do better error checking. This patch adds support for such rate table based dividers and as part of the support adds a new registration function 'clk_register_divider_table()' and a new macro for static definition 'DEFINE_CLK_DIVIDER_TABLE'. Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
-
Rajendra Nayak authored
Quite often dividers and the value programmed in the register have a relation of 'power of two', something like value div 0 1 1 2 2 4 3 8... Add support for such dividers as part of clk-divider. The clk-divider flag 'CLK_DIVIDER_POWER_OF_TWO' should be used to define such clocks. Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
-
- 08 Jul, 2012 3 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-securityLinus Torvalds authored
Pull security docs update from James Morris. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: security: Minor improvements to no_new_privs documentation
-
Linus Torvalds authored
We already use them for openat() and friends, but fchdir() also wants to be able to use O_PATH file descriptors. This should make it comparable to the O_SEARCH of Solaris. In particular, O_PATH allows you to access (not-quite-open) a directory you don't have read persmission to, only execute permission. Noticed during development of multithread support for ksh93. Reported-by: ольга крыжановская <olga.kryzhanovska@gmail.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: stable@kernel.org # O_PATH introduced in 3.0+ Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
- 07 Jul, 2012 2 commits
-
-
git://git.linaro.org/people/rmk/linux-armLinus Torvalds authored
Pull ARM fixes from Russell King: "Last merge window, we had some updates from Al cleaning up the signal restart handling. These have caused some problems on ARM, and while Al has some fixes, we have some concerns with Al's patches but we've been unsuccesful with discussing this. We have got to the point where we need to do something, and we've decided that the best solution is to revert the appropriate commits until Al is able to reply to us. Also included here are four patches to fix warnings that I've noticed in my build system, and one fix for kprobes test code." * 'fixes' of git://git.linaro.org/people/rmk/linux-arm: ARM: fix warning caused by wrongly typed arm_dma_limit ARM: fix warnings about atomic64_read ARM: 7440/1: kprobes: only test 'sub pc, pc, #1b-2b+8-2' on ARMv6 ARM: 7441/1: perf: return -EOPNOTSUPP if requested mode exclusion is unavailable ARM: 7443/1: Revert "new way of handling ERESTART_RESTARTBLOCK" ARM: 7442/1: Revert "remove unused restart trampoline" ARM: fix set_domain() macro ARM: fix mach-versatile/pci.c warning
-
Andy Lutomirski authored
The documentation didn't actually mention how to enable no_new_privs. This also adds a note about possible interactions between no_new_privs and LSMs (i.e. why teaching systemd to set no_new_privs is not necessarily a good idea), and it references the new docs from include/linux/prctl.h. Suggested-by: Rob Landley <rob@landley.net> Signed-off-by: Andy Lutomirski <luto@amacapital.net> Acked-by: Kees Cook <keescook@chromium.org> Signed-off-by: James Morris <james.l.morris@oracle.com>
-
- 06 Jul, 2012 11 commits
-
-
Linus Torvalds authored
Merge tag 'ecryptfs-3.5-rc6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tyhicks/ecryptfs Pull eCryptfs fixes from Tyler Hicks: "Fixes an incorrect access mode check when preparing to open a file in the lower filesystem. This isn't an urgent fix, but it is simple and the check was obviously incorrect. Also fixes a couple important bugs in the eCryptfs miscdev interface. These changes are low risk due to the small number of users that use the miscdev interface. I was able to keep the changes minimal and I have some cleaner, more complete changes queued up for the next merge window that will build on these patches." * tag 'ecryptfs-3.5-rc6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tyhicks/ecryptfs: eCryptfs: Gracefully refuse miscdev file ops on inherited/passed files eCryptfs: Fix lockdep warning in miscdev operations eCryptfs: Properly check for O_RDONLY flag before doing privileged open
-
git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pendingLinus Torvalds authored
Pull target fixes from Nicholas Bellinger: "Two minor target fixes. There is really nothing exciting and/or controversial this time around. There's one fix from MDR for a RCU debug warning message within tcm_fc code (CC'ed to stable), and a small AC fix for qla_target.c based upon a recent Coverity static report. Also, there is one other outstanding virtio-scsi LUN scanning bugfix that has been uncovered with the in-flight tcm_vhost driver over the last days, and that needs to make it into 3.5 final too. This patch has been posted to linux-scsi again here: http://marc.info/?l=linux-scsi&m=134160609212542&w=2 and I've asked James to include it in his next PULL request." * git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: qla2xxx: print the right array elements in qlt_async_event tcm_fc: Resolve suspicious RCU usage warnings
-
Tyler Hicks authored
File operations on /dev/ecryptfs would BUG() when the operations were performed by processes other than the process that originally opened the file. This could happen with open files inherited after fork() or file descriptors passed through IPC mechanisms. Rather than calling BUG(), an error code can be safely returned in most situations. In ecryptfs_miscdev_release(), eCryptfs still needs to handle the release even if the last file reference is being held by a process that didn't originally open the file. ecryptfs_find_daemon_by_euid() will not be successful, so a pointer to the daemon is stored in the file's private_data. The private_data pointer is initialized when the miscdev file is opened and only used when the file is released. https://launchpad.net/bugs/994247Signed-off-by: Tyler Hicks <tyhicks@canonical.com> Reported-by: Sasha Levin <levinsasha928@gmail.com> Tested-by: Sasha Levin <levinsasha928@gmail.com>
-
Alan Cox authored
Based upon Alan's patch from Coverity scan id 793583, these debug messages in qlt_async_event() should be starting from byte 0, which is always the Asynchronous Event Status Code from the parent switch statement. Also, rename reason_code -> login_code following the language used in 2500 FW spec for Port Database Changed (0x8014) -> Port Database Changed Event Mailbox Register for mailbox[2]. Signed-off-by: Alan Cox <alan@linux.intel.com> Cc: Chad Dupuis <chad.dupuis@qlogic.com> Cc: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
-
Mark Rustad authored
Use rcu_dereference_protected to tell rcu that the ft_lport_lock is held during ft_lport_create. This resolved "suspicious RCU usage" warnings when debugging options are turned on. Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Cc: <stable@vger.kernel.org> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
-
git://git.infradead.org/linux-mtdLinus Torvalds authored
Pull two MTD fixes from David Woodhouse: - Fix a logic error in OLPC CAFÉ NAND ready() function. - Fix regression due to bitflip handling changes. * tag 'for-linus-20120706' of git://git.infradead.org/linux-mtd: mtd: cafe_nand: fix an & vs | mistake mtd: nand: initialize bitflip_threshold prior to BBT scanning
-
Andy Lutomirski authored
Otherwise the code races with munmap (causing a use-after-free of the vma) or with close (causing a use-after-free of the struct file). The bug was introduced by commit 90ed52eb ("[PATCH] holepunch: fix mmap_sem i_mutex deadlock") Cc: Hugh Dickins <hugh@veritas.com> Cc: Miklos Szeredi <mszeredi@suse.cz> Cc: Badari Pulavarty <pbadari@us.ibm.com> Cc: Nick Piggin <npiggin@suse.de> Cc: stable@vger.kernel.org Signed-off-by: Andy Lutomirski <luto@amacapital.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/jlbec/ocfs2Linus Torvalds authored
Pull ocfs2 fixes from Joel Becker. * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jlbec/ocfs2: aio: make kiocb->private NUll in init_sync_kiocb() ocfs2: Fix bogus error message from ocfs2_global_read_info ocfs2: for SEEK_DATA/SEEK_HOLE, return internal error unchanged if ocfs2_get_clusters_nocache() or ocfs2_inode_lock() call failed. ocfs2: use spinlock irqsave for downconvert lock.patch ocfs2: Misplaced parens in unlikley ocfs2: clear unaligned io flag when dio fails
-
git://git.samba.org/sfrench/cifs-2.6Linus Torvalds authored
Pull cifs fixes from Steve French. * git://git.samba.org/sfrench/cifs-2.6: cifs: when server doesn't set CAP_LARGE_READ_X, cap default rsize at MaxBufferSize cifs: fix parsing of password mount option
-
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/inputLinus Torvalds authored
Pull input layer fixes from Dmitry Torokhov: "Two fixes for regressions in Wacom driver and fixes for drivers using threaded IRQ framework without specifying IRQF_ONESHOT." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: request threaded-only IRQs with IRQF_ONESHOT Input: wacom - don't retrieve touch_max when it is predefined Input: wacom - fix retrieving touch_max bug Input: fix input.h kernel-doc warning
-
Dan Carpenter authored
The intent here was clearly to set result to true if the 0x40000000 flag was set. But instead there was a | vs & typo and we always set result to true. Artem: check the spec at wiki.laptop.org/images/5/5c/88ALP01_Datasheet_July_2007.pdf and this fix looks correct. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Cc: stable@vger.kernel.org Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
-
- 05 Jul, 2012 6 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds authored
Pull ARM SoC fixes from Arnd Bergmann: "Small fixes on multiple ARM platforms - A build regression from a previous fix on dove and mv78xx0 - Two fixes for recently (3.5-rc1) changed mmp/pxa code - multiple omap2+ bug fixes - two trivial fixes for i.MX - one v3.5 regression for mxs" * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: apx4devkit: fix FEC enabling PHY clock ARM: OMAP2+: hwmod data: Fix wrong McBSP clock alias on OMAP4 ARM: OMAP4: hwmod data: temporarily comment out data for the usb_host_fs and aess IP blocks ARM: Orion: Fix WDT compile for Dove and MV78xx0 ARM: mmp: remove mach/gpio-pxa.h ARM: imx: assert SCC gate stays enabled ARM: OMAP4: TWL6030: ensure sys_nirq1 is mux'd and wakeup enabled ARM: OMAP2: Overo: init I2C before MMC to fix MMC suspend/resume failure ARM: imx27_visstrim_m10: Do not include <asm/system.h> ARM: pxa: hx4700: Fix basic suspend/resume
-
git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds authored
Pull KVM fix from Marcelo Tosatti: "Memory leak and oops on the x86 mmu code, and sanitization of the KVM_IRQFD ioctl." * git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: MMU: fix shrinking page from the empty mmu KVM: fix fault page leak KVM: Sanitize KVM_IRQFD flags KVM: Add missing KVM_IRQFD API documentation KVM: Pass kvm_irqfd to functions
-
git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-ledsLinus Torvalds authored
Pull leds fix from Bryan Wu: "Fix for heartbeat led trigger driver" * 'fixes-for-3.5' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds: leds: heartbeat: fix bug on panic
-
git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfsLinus Torvalds authored
Pull btrfs updates from Chris Mason: "I held off on my rc5 pull because I hit an oops during log recovery after a crash. I wanted to make sure it wasn't a regression because we have some logging fixes in here. It turns out that a commit during the merge window just made it much more likely to trigger directory logging instead of full commits, which exposed an old bug. The new backref walking code got some additional fixes. This should be the final set of them. Josef fixed up a corner where our O_DIRECT writes and buffered reads could expose old file contents (not stale, just not the most recent). He and Liu Bo fixed crashes during tree log recover as well. Ilya fixed errors while we resume disk balancing operations on readonly mounts." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: Btrfs: run delayed directory updates during log replay Btrfs: hold a ref on the inode during writepages Btrfs: fix tree log remove space corner case Btrfs: fix wrong check during log recovery Btrfs: use _IOR for BTRFS_IOC_SUBVOL_GETFLAGS Btrfs: resume balance on rw (re)mounts properly Btrfs: restore restriper state on all mounts Btrfs: fix dio write vs buffered read race Btrfs: don't count I/O statistic read errors for missing devices Btrfs: resolve tree mod log locking issue in btrfs_next_leaf Btrfs: fix tree mod log rewind of ADD operations Btrfs: leave critical region in btrfs_find_all_roots as soon as possible Btrfs: always put insert_ptr modifications into the tree mod log Btrfs: fix tree mod log for root replacements at leaf level Btrfs: support root level changes in __resolve_indirect_ref Btrfs: avoid waiting for delayed refs when we must not
-
git://sources.calxeda.com/kernel/linuxLinus Torvalds authored
Pull DT fixes from Rob Herring: "Mainly some documentation updates and 2 fixes: - An export symbol fix for of_platform_populate from Stephen W. - A fix for the order compatible entries are matched to ensure the first compatible string is matched when there are multiple matches." Normally these would go through Grant Likely (thus the "fixes-for-grant" branch name), but Grant is in the middle of moving to Scotland, and is practically offline until sometime in August. So pull directly from Rob. * 'fixes-for-grant' of git://sources.calxeda.com/kernel/linux: of: match by compatible property first dt: mc13xxx.txt: Fix gpio number assignment dt: fsl-fec.txt: Fix gpio number assignment dt: fsl-mma8450.txt: Add missing 'reg' description dt: fsl-imx-esdhc.txt: Fix gpio number assignment dt: fsl-imx-cspi.txt: Fix comment about GPIOs used for chip selects of: Add Avionic Design vendor prefix of: export of_platform_populate()
-
Russell King authored
arch/arm/mm/init.c: In function 'arm_memblock_init': arch/arm/mm/init.c:380: warning: comparison of distinct pointer types lacks a cast by fixing the typecast in its definition when DMA_ZONE is disabled. This was missed in 4986e5c7 (ARM: mm: fix type of the arm_dma_limit global variable). Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-