- 11 Oct, 2018 30 commits
-
-
Thierry Reding authored
Probe deferrals aren't actual errors, so silence the error message in case the PWM cannot yet be acquired. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
-
zhong jiang authored
The continue will not truely skip any code. hence it is safe to remove it. Signed-off-by: zhong jiang <zhongjiang@huawei.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
-
Guenter Roeck authored
NCT6798D is, with the exception of fan and pwm channel configuration registers, similar to other chips of the series. One interesting difference is the chip ID, which is now extended to 13 bit (the 12-bit chip ID value overlaps with the chip ID of NCT6797D). Signed-off-by: Guenter Roeck <linux@roeck-us.net>
-
Guenter Roeck authored
Add support for NCT6797D. With the exception of fan/pwm configuration registers, it is mostly compatible with NCT6795D. Signed-off-by: Guenter Roeck <linux@roeck-us.net>
-
Guenter Roeck authored
For NCT6795D and NCT6796D, the DIMM temperature sources are named "Agent[01] Dimm [01]" per datasheet. Match names in datasheets to avoid confusion. Signed-off-by: Guenter Roeck <linux@roeck-us.net>
-
Guenter Roeck authored
Now that everything is separated, clean up fan and pwm configuration for NCT6796D. While doing that, take the forgotten configuration register cre0 into account to determine if AUXFANIN2 (fan5) and AUXFANOUT2 (pwm5) are connected. Signed-off-by: Guenter Roeck <linux@roeck-us.net>
-
Guenter Roeck authored
Separate fan/pwm configuration detection for NCT6795D into separate case statement to make the code easier to read. No functional change. Signed-off-by: Guenter Roeck <linux@roeck-us.net>
-
Guenter Roeck authored
While detecting the configuration for multiple chips in one go reduces code size, it also increases code complexity. Separate chip detection to improve code readability. As first step, separate detection for NCT6793D. No functional change. Signed-off-by: Guenter Roeck <linux@roeck-us.net>
-
Guenter Roeck authored
Per datasheet, AUXFANIN3 (fan6) and AUXFANOUT3 (pwm6) are only connected if DSW_EN is false. Signed-off-by: Guenter Roeck <linux@roeck-us.net>
-
Guenter Roeck authored
When determining support for a given fan or pwm control, the code is easier to read if the necessary instructions are grouped together. No functional change. Signed-off-by: Guenter Roeck <linux@roeck-us.net>
-
Guenter Roeck authored
Use boolean |= <expression>; instead of if (!boolean) boolean = <expression>; to assign values to boolean variables. No functional change. Signed-off-by: Guenter Roeck <linux@roeck-us.net>
-
Guenter Roeck authored
Declare and initialize LDN / chip specific configuration variables earlier. This simplifies re-using the configuration variables for multiple chips and makes the code easier to read. Signed-off-by: Guenter Roeck <linux@roeck-us.net>
-
Guenter Roeck authored
Group configuration variable declarations and initialization together. While this results in reading more registers than necessary for a given chip, it improves code readability and simplifies extending the code. Signed-off-by: Guenter Roeck <linux@roeck-us.net>
-
Guenter Roeck authored
Using variables named after configuration registers makes it more obvious which configuration register value is used, especially if more than one configuration register value is used to determine a configuration detail. No functional change. Signed-off-by: Guenter Roeck <linux@roeck-us.net>
-
Guenter Roeck authored
Use variable names from chip datasheets (crXX) instead of regval_XX for configuration register variables. This is shorter and, together with subsequent changes, makes the code easier to read. No functional change. Signed-off-by: Guenter Roeck <linux@roeck-us.net>
-
Guenter Roeck authored
A fan speed tolerance only makes sense if a fan target speed has been configured in the first place. Otherwise we get odd output such as fan1_target:0 fan1_tolerance:337500 Only display values other than 0 if a fan target speed has been configured. Signed-off-by: Guenter Roeck <linux@roeck-us.net>
-
Guenter Roeck authored
Smatch complains: drivers/hwmon/lm92.c:209 set_temp_hyst() warn: inconsistent indenting While at it, fix various other whitespace issues reported by checkpatch (double empty lines, missing empty lines, whitespace at empty line). Signed-off-by: Guenter Roeck <linux@roeck-us.net>
-
Nathan Chancellor authored
Clang warns when the address of a pointer is used in a boolean context as it will always return true. drivers/hwmon/scmi-hwmon.c:59:24: warning: address of array 'sensor->name' will always evaluate to 'true' [-Wpointer-bool-conversion] if (sensor && sensor->name) ~~ ~~~~~~~~^~~~ 1 warning generated. Remove the check as it isn't doing anything currently; if validation of the contents of the data structure was intended by the original author (since this line has been present from the first version of this driver), it can be added in a follow-up patch. Reported-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
-
zhong jiang authored
PTR_ERR_OR_ZERO has implemented the same function. We prefer to use inlined function rather than code-opened implementation. Signed-off-by: zhong jiang <zhongjiang@huawei.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
-
Kun Yi authored
MAX31725/MAX31726 are local temperature sensors with +/- 0.5 degree Celsius accuracy and 16-bit (0.00390625 degrees Celsius) resolution. They have a register mapping and encoding compatible with the lm75 series drivers. Address scan and extended temperature range are not supported by this patch. Tested on real hardware and verified temperature readings are correct. Signed-off-by: Kun Yi <kunyi@google.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
-
Fabio Estevam authored
Adopt the SPDX license identifier headers to ease license compliance management. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
-
Fabio Estevam authored
Adopt the SPDX license identifier headers to ease license compliance management. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
-
Dan Carpenter authored
I removed the "dsw_en &&" chunk of the condition because we know that "dsw_en" is set. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
-
Guenter Roeck authored
BIOS developer guides refer to Family 15h Models 60h-6fh and Family 15h Models 70h-7fh. So far the driver only checked for Models 60h and 70h. However, there are now processors with other model numbers in the same families. Example is A10-9620P family 15h model 65h. Follow the developer guides and mask the lower 4 bit of the model number to determine the registers to use for reading temperatures and temperature limits. Reported-by: Guglielmo Fanini <g.fanini@gmail.com> Cc: Guglielmo Fanini <g.fanini@gmail.com> Acked-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
-
Rob Herring authored
Checking the child node names is pointless as the DT node name can never be NULL, so remove it. Cc: Jean Delvare <jdelvare@suse.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: linux-hwmon@vger.kernel.org Cc: linuxppc-dev@lists.ozlabs.org Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
-
Guenter Roeck authored
Calling devm_kstrdup() on a fixed string is unnecessary, as is validating its contents. Rearrange the code to avoid both. Signed-off-by: Guenter Roeck <linux@roeck-us.net>
-
Rob Herring authored
In preparation to remove the node name pointer from struct device_node, convert printf users to use the %pOFn format specifier. Cc: Jean Delvare <jdelvare@suse.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: linux-hwmon@vger.kernel.org Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
-
Fabio Estevam authored
Use the nxp.com URLs for the MC13783 and MC13892 datasheets. The original URLs are still valid, but the nxp.com one is shorter and more up-to-date. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
-
Fabio Estevam authored
'Atlas' was an internal name for the MC13783 PMIC only and does not apply to MC13892. To avoid confusion, remove the 'Atlas' term from the description. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
-
Michael Hennerich authored
This patch adds support for LTM4686 Ultrathin Dual 10A or Single 20A uModule Regulator with Digital Power System Management. Datasheet: http://www.analog.com/ltm4686Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
-
- 07 Oct, 2018 7 commits
-
-
Greg Kroah-Hartman authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-miscGreg Kroah-Hartman authored
I wrote: "Char/Misc fixes for 4.19-rc7 Here are 8 small fixes for some char/misc driver issues Included here are: - fpga driver fixes - thunderbolt bugfixes - firmware core revert/fix - hv core fix - hv tool fix All of these have been in linux-next with no reported issues." * tag 'char-misc-4.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: thunderbolt: Initialize after IOMMUs thunderbolt: Do not handle ICM events after domain is stopped firmware: Always initialize the fw_priv list object docs: fpga: document fpga manager flags fpga: bridge: fix obvious function documentation error tools: hv: fcopy: set 'error' in case an unknown operation was requested fpga: do not access region struct after fpga_region_unregister Drivers: hv: vmbus: Use get/put_cpu() in vmbus_connect()
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/ttyGreg Kroah-Hartman authored
I wrote: "Serial driver fixes for 4.19-rc7 Here are 3 small serial driver fixes for 4.19-rc7 - 2 sh-sci bugfixes for reported issues - a revert of the PM handling for the 8250_dw code All of these have been in linux-next with no reported issues." * tag 'tty-4.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: Revert "serial: sh-sci: Allow for compressed SCIF address" Revert "serial: sh-sci: Remove SCIx_RZ_SCIFA_REGTYPE" Revert "serial: 8250_dw: Fix runtime PM handling"
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usbGreg Kroah-Hartman authored
I wrote: "USB fixes for 4.19-rc7 Here are some small USB fixes for 4.19-rc7 These include: - the usual xhci bugfixes for reported issues - some new serial driver device ids - bugfix for the option serial driver for some devices - bugfix for the cdc_acm driver that has been there for a long time. All of these have been in linux-next for a while with no reported issues." * tag 'usb-4.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: usb: xhci-mtk: resume USB3 roothub first xhci: Add missing CAS workaround for Intel Sunrise Point xHCI usb: cdc_acm: Do not leak URB buffers USB: serial: simple: add Motorola Tetra MTP6550 id USB: serial: option: add two-endpoints device-id flag USB: serial: option: improve Quectel EP06 detection
-
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linuxGreg Kroah-Hartman authored
Wolfram writes: "i2c for 4.19 I2C has three driver bugfixes and a fix for a typo for you." * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: designware: Call i2c_dw_clk_rate() only when calculating timings i2c: i2c-scmi: fix for i2c_smbus_write_block_data i2c: i2c-isch: fix spelling mistake "unitialized" -> "uninitialized" i2c: i2c-qcom-geni: Properly handle DMA safe buffers
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiGreg Kroah-Hartman authored
James writes: "SCSI fixes on 20181006 Small fix for an unititialized mutex in the qedi driver." * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: qedi: Initialize the stats mutex lock
-
https://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linuxGreg Kroah-Hartman authored
Michael writes: "powerpc fixes for 4.19 #4 Four regression fixes. A fix for a change to lib/xz which broke our zImage loader when building with XZ compression. OK'ed by Herbert who merged the original patch. The recent fix we did to avoid patching __init text broke some 32-bit machines, fix that. Our show_user_instructions() could be tricked into printing kernel memory, add a check to avoid that. And a fix for a change to our NUMA initialisation logic, which causes crashes in some kdump configurations. Thanks to: Christophe Leroy, Hari Bathini, Jann Horn, Joel Stanley, Meelis Roos, Murilo Opsfelder Araujo, Srikar Dronamraju." * tag 'powerpc-4.19-4' of https://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/numa: Skip onlining a offline node in kdump path powerpc: Don't print kernel instructions in show_user_instructions() powerpc/lib: fix book3s/32 boot failure due to code patching lib/xz: Put CRC32_POLY_LE in xz_private.h
-
- 06 Oct, 2018 1 commit
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netGreg Kroah-Hartman authored
Dave writes: "Networking fixes: 1) Fix truncation of 32-bit right shift in bpf, from Jann Horn. 2) Fix memory leak in wireless wext compat, from Stefan Seyfried. 3) Use after free in cfg80211's reg_process_hint(), from Yu Zhao. 4) Need to cancel pending work when unbinding in smsc75xx otherwise we oops, also from Yu Zhao. 5) Don't allow enslaving a team device to itself, from Ido Schimmel. 6) Fix backwards compat with older userspace for rtnetlink FDB dumps. From Mauricio Faria. 7) Add validation of tc policy netlink attributes, from David Ahern. 8) Fix RCU locking in rawv6_send_hdrinc(), from Wei Wang." * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (26 commits) net: mvpp2: Extract the correct ethtype from the skb for tx csum offload ipv6: take rcu lock in rawv6_send_hdrinc() net: sched: Add policy validation for tc attributes rtnetlink: fix rtnl_fdb_dump() for ndmsg header yam: fix a missing-check bug net: bpfilter: Fix type cast and pointer warnings net: cxgb3_main: fix a missing-check bug bpf: 32-bit RSH verification must truncate input before the ALU op net: phy: phylink: fix SFP interface autodetection be2net: don't flip hw_features when VXLANs are added/deleted net/packet: fix packet drop as of virtio gso net: dsa: b53: Keep CPU port as tagged in all VLANs openvswitch: load NAT helper bnxt_en: get the reduced max_irqs by the ones used by RDMA bnxt_en: free hwrm resources, if driver probe fails. bnxt_en: Fix enables field in HWRM_QUEUE_COS2BW_CFG request bnxt_en: Fix VNIC reservations on the PF. team: Forbid enslaving team device to itself net/usb: cancel pending work when unbinding smsc75xx mlxsw: spectrum: Delete RIF when VLAN device is removed ...
-
- 05 Oct, 2018 2 commits
-
-
Greg Kroah-Hartman authored
* akpm: mm: madvise(MADV_DODUMP): allow hugetlbfs pages ocfs2: fix locking for res->tracking and dlm->tracking_list mm/vmscan.c: fix int overflow in callers of do_shrink_slab() mm/vmstat.c: skip NR_TLB_REMOTE_FLUSH* properly mm/vmstat.c: fix outdated vmstat_text proc: restrict kernel stack dumps to root mm/hugetlb: add mmap() encodings for 32MB and 512MB page sizes mm/migrate.c: split only transparent huge pages when allocation fails ipc/shm.c: use ERR_CAST() for shm_lock() error return mm/gup_benchmark: fix unsigned comparison to zero in __gup_benchmark_ioctl mm, thp: fix mlocking THP page with migration enabled ocfs2: fix crash in ocfs2_duplicate_clusters_by_page() hugetlb: take PMD sharing into account when flushing tlb/caches mm: migration: fix migration of huge PMD shared pages
-
Daniel Black authored
Reproducer, assuming 2M of hugetlbfs available: Hugetlbfs mounted, size=2M and option user=testuser # mount | grep ^hugetlbfs hugetlbfs on /dev/hugepages type hugetlbfs (rw,pagesize=2M,user=dan) # sysctl vm.nr_hugepages=1 vm.nr_hugepages = 1 # grep Huge /proc/meminfo AnonHugePages: 0 kB ShmemHugePages: 0 kB HugePages_Total: 1 HugePages_Free: 1 HugePages_Rsvd: 0 HugePages_Surp: 0 Hugepagesize: 2048 kB Hugetlb: 2048 kB Code: #include <sys/mman.h> #include <stddef.h> #define SIZE 2*1024*1024 int main() { void *ptr; ptr = mmap(NULL, SIZE, PROT_READ | PROT_WRITE, MAP_PRIVATE | MAP_HUGETLB | MAP_ANONYMOUS, -1, 0); madvise(ptr, SIZE, MADV_DONTDUMP); madvise(ptr, SIZE, MADV_DODUMP); } Compile and strace: mmap(NULL, 2097152, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS|MAP_HUGETLB, -1, 0) = 0x7ff7c9200000 madvise(0x7ff7c9200000, 2097152, MADV_DONTDUMP) = 0 madvise(0x7ff7c9200000, 2097152, MADV_DODUMP) = -1 EINVAL (Invalid argument) hugetlbfs pages have VM_DONTEXPAND in the VmFlags driver pages based on author testing with analysis from Florian Weimer[1]. The inclusion of VM_DONTEXPAND into the VM_SPECIAL defination was a consequence of the large useage of VM_DONTEXPAND in device drivers. A consequence of [2] is that VM_DONTEXPAND marked pages are unable to be marked DODUMP. A user could quite legitimately madvise(MADV_DONTDUMP) their hugetlbfs memory for a while and later request that madvise(MADV_DODUMP) on the same memory. We correct this omission by allowing madvice(MADV_DODUMP) on hugetlbfs pages. [1] https://stackoverflow.com/questions/52548260/madvisedodump-on-the-same-ptr-size-as-a-successful-madvisedontdump-fails-wit [2] commit 0103bd16 ("mm: prepare VM_DONTDUMP for using in drivers") Link: http://lkml.kernel.org/r/20180930054629.29150-1-daniel@linux.ibm.com Link: https://lists.launchpad.net/maria-discuss/msg05245.html Fixes: 0103bd16 ("mm: prepare VM_DONTDUMP for using in drivers") Reported-by: Kenneth Penza <kpenza@gmail.com> Signed-off-by: Daniel Black <daniel@linux.ibm.com> Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com> Cc: Konstantin Khlebnikov <khlebnikov@openvz.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-