- 04 Dec, 2019 2 commits
-
-
Corentin Labbe authored
This patch fix the following warning: drivers/char/agp/generic.c:853:6: attention : variable ‘size’ set but not used [-Wunused-but-set-variable] by removing the unused variable size in agp_generic_create_gatt_table Signed-off-by:
Corentin Labbe <clabbe@baylibre.com> Acked-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/1574324085-4338-2-git-send-email-clabbe@baylibre.com
-
git://people.freedesktop.org/~agd5f/linuxDave Airlie authored
drm-next-5.5-2019-12-03: amdgpu: - Fix vram lost handling with BACO on VI/CI asics - DC fixes for Navi14 - Misc gfx10 fixes - SR-IOV fixes - Fix driver unload - Fix XGMI limits on Arcturus amdkfd: - Enable KFD on PPC - Optimize KFD page table reservations radeon: - Fix register checker for r1xx/r2xx Signed-off-by:
-
- 03 Dec, 2019 14 commits
-
-
Alex Deucher authored
Shift and mask were reversed. Noticed by chance. Tested-by:
Meelis Roos <mroos@linux.ee> Reviewed-by:
Michel Dänzer <mdaenzer@redhat.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
-
Monk Liu authored
still need to init csb even for SRIOV v2: drop init_pg() for gfx10 at all since PG and GFX off feature will be fully controled by RLC and SMU fw for gfx10 v3: drop the flush_gpu_tlb lines since we consider it is only usefull in emulation Signed-off-by:
Monk Liu <Monk.Liu@amd.com> Reviewed-by:
Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by:
-
Monk Liu authored
To align with the scheme from gfx9 disabling GFX ring after VM shutdown could avoid garbage data be fetched to GFX RB which may lead to unnecessary screw up on GFX Signed-off-by:
-
Monk Liu authored
since we don't have RLCG ucode loading and no SRlist as well Signed-off-by:
-
Monk Liu authored
Signed-off-by:
-
Monk Liu authored
issue: kernel would report a warning from a double unpin during the driver unloading on the CSB bo why: we unpin it during hw_fini, and there will be another unpin in sw_fini on CSB bo. fix: actually we don't need to pin/unpin it during hw_init/fini since it is created with kernel pinned, we only need to fullfill the CSB again during hw_init to prevent CSB/VRAM lost after S3 v2: get_csb in init_rlc so hw_init() will make CSIB content back even after reset or s3 v3: use bo_create_kernel instead of bo_create_reserved for CSB otherwise the bo_free_kernel() on CSB is not aligned and would lead to its internal reserve pending there forever take care of gfx7/8 as well Signed-off-by:
Xiaojie Yuan <xiaojie.yuan@amd.com> Signed-off-by:
-
Xiaojie Yuan authored
srbm_mutex is to guarantee atomicity for r/w of gfx indexed registers Signed-off-by:
-
John Clements authored
Added max hive/node info checks per supported ASIC Reviewed-by:
John Clements <john.clements@amd.com> Signed-off-by:
-
Likun Gao authored
Drop smu_send_smc_msg function from ASIC specify structure. Reuse smu_send_smc_msg_with_param function for smu_send_smc_msg. Set paramer to 0 for smu_send_msg function, otherwise it will send with previous paramer value (Not a certain value). Materialize msg type for smu send message function definition. Signed-off-by:
Likun Gao <Likun.Gao@amd.com> Reviewed-by:
Kevin Wang <kevin1.wang@amd.com> Reviewed-by:
Evan Quan <evan.quan@amd.com> Signed-off-by:
-
Alex Deucher authored
Removing this causes hangs in some games, so re-add it, but add a timeout so we don't hang while switching flip types. Bug: https://bugzilla.kernel.org/show_bug.cgi?id=205169 Bug: https://bugs.freedesktop.org/show_bug.cgi?id=112266Reviewed-by:
Harry Wentland <harry.wentland@amd.com> Signed-off-by:
-
Zhan liu authored
[Why] NV14 is using its own ip params that's different from other DCN2.0 ASICs. [How] Add ASIC revision check to make sure NV14 gets correct ip params. Signed-off-by:
Zhan Liu <zhan.liu@amd.com> Reviewed-by:
Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by:
-
Zhan liu authored
[Why] NV14 IP Parameters are missing. [How] Add IP Parameters in. Signed-off-by:
-
Zhan Liu authored
[Why] "num_vmid" and "num_dsc" are missing within NV14's resource caps structure. [How] Add the missing parts. Signed-off-by:
-
Monk Liu authored
otherwse the flush_gpu_tlb will hang if we unload the KMD becuase the schedulers already stopped Signed-off-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
-
- 02 Dec, 2019 2 commits
-
-
Dave Airlie authored
Merge tag 'drm-intel-next-fixes-2019-11-28' of git://anongit.freedesktop.org/drm/drm-intel into drm-next - Important fix to uAPI alignment on query IOCTL - Fixes for the power regression introduced by the previous security patches - Avoid regressing super heavy benchmarks by increasing the default request pre-emption timeout from 100 ms to 640 ms to - Resulting set of smaller fixes done while problem was inspected - Display fixes for EHL voltage level programming and TGL DKL PHY vswing for HDMI Signed-off-by:
-
https://gitlab.freedesktop.org/drm/msmDave Airlie authored
+ OCMEM support to enable the couple generations that had shared OCMEM rather than GMEM exclusively for the GPU (late a3xx and I think basically all of a4xx). Bjorn and Brian decided to land this through the drm tree to avoid having to coordinate merge requests. + a510 support, and various associated display support + the usual misc cleanups and fixes Signed-off-by:
-
- 27 Nov, 2019 2 commits
-
-
Chris Wilson authored
On context retiring, we may invoke the kernel_context to unpin this context. Elsewhere, we may use the kernel_context to modify this context. This currently leads to an AB-BA lock inversion, so we need to back-off from the contended lock, and repeat. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111732Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Fixes: a9877da2 ("drm/i915/oa: Reconfigure contexts on the fly") Reviewed-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191126065521.2331017-1-chris@chris-wilson.co.uk (cherry picked from commit 58b4c1a0) Signed-off-by:
Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
-
Chris Wilson authored
Based on a sampling of a number of benchmarks across platforms, by default opt for a much more lenient timeout so that we should not adversely affect existing "good" clients. 640ms ought to be enough for anyone. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=112169 Fixes: 3a7a92ab ("drm/i915/execlists: Force preemption") Signed-off-by:
-
- 26 Nov, 2019 7 commits
-
-
Timothy Pearson authored
KFD has been verified to function on POWER systems (Talos II / Vega 64). It should be available as a kernel configuration option on these systems. Signed-off-by:
Timothy Pearson <tpearson@raptorengineering.com> Signed-off-by:
-
Felix Kuehling authored
Be less pessimistic about estimated page table use for KFD. Most allocations use 2MB pages and therefore need less VRAM for page tables. This allows more VRAM to be used for applications especially on large systems with many GPUs and hundreds of GB of system memory. Example: 8 GPUs with 32GB VRAM each + 256GB system memory = 512GB Old page table reservation per GPU: 1GB New page table reservation per GPU: 32MB Signed-off-by:
Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by:
xinhui pan <xinhui.pan@amd.com> Signed-off-by:
-
Alex Deucher authored
VI/CIK BACO was inflight when this fix landed for SOC15/NV. Add the fix to VI/CIK as well. Acked-by:
-
Alex Deucher authored
No longer works on the driver. Reviewed-by:
-
John Clements authored
Updated target I2C address Reviewed-by:
-
Alex Deucher authored
dm_pp_get_clock_levels_by_type needs to add the default clocks to the powerplay case as well. This was accidently dropped. Fixes: b3ea88fe ("drm/amd/powerplay: add get_clock_by_type interface for display") Bug: https://gitlab.freedesktop.org/drm/amd/issues/906Reviewed-by:
-
Chris Wilson authored
In order to avoid some nasty mutex inversions, commit 09c5ab38 ("drm/i915: Keep rings pinned while the context is active") allowed the intel_ring unpinning to be run concurrently with the next context pinning it. Thus each step in intel_ring_unpin() needed to be atomic and ordered in a nice onion with intel_ring_pin() so that the lifetimes overlapped and were always safe. Sadly, a few steps in intel_ring_unpin() were overlooked, such as closing the read/write pointers of the ring and discarding the intel_ring.vaddr, as these steps were not serialised with intel_ring_pin() and so could leave the ring in disarray. Fixes: 09c5ab38 ("drm/i915: Keep rings pinned while the context is active") Signed-off-by:
-
- 25 Nov, 2019 13 commits
-
-
git://people.freedesktop.org/~agd5f/linuxDave Airlie authored
drm-next-5.5-2019-11-22: amdgpu: - Fix bad DMA on some PPC platforms - MMHUB fix for powergating - BACO fix for Navi - Misc raven fixes - Enable vbios fetch directly from rom on navi - debugfs fix for DC - SR-IOV fixes for arcturus - Misc power fixes radeon: - Fix bad DMA on some PPC platforms Signed-off-by:
-
Dave Airlie authored
Merge tag 'drm-intel-next-fixes-2019-11-22' of git://anongit.freedesktop.org/drm/drm-intel into drm-next - Reverts a patch to avoid spinning forever when context's timeline is active but has no requests Signed-off-by:
-
Chris Wilson authored
The major drawback of commit 7e34f4e4 ("drm/i915/gen8+: Add RC6 CTX corruption WA") is that it disables RC6 while Skylake (and friends) is active, and we do not consider the GPU idle until all outstanding requests have been retired and the engine switched over to the kernel context. If userspace is idle, this task falls onto our background idle worker, which only runs roughly once a second, meaning that userspace has to have been idle for a couple of seconds before we enable RC6 again. Naturally, this causes us to consume considerably more energy than before as powersaving is effectively disabled while a display server (here's looking at you Xorg) is running. As execlists will get a completion event as each context is completed, we can use this interrupt to queue a retire worker bound to this engine to cleanup idle timelines. We will then immediately notice the idle engine (without userspace intervention or the aid of the background retire worker) and start parking the GPU. Thus during light workloads, we will do much more work to idle the GPU faster... Hopefully with commensurate power saving! v2: Watch context completions and only look at those local to the engine when retiring to reduce the amount of excess work we perform. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=112315 References: 7e34f4e4 ("drm/i915/gen8+: Add RC6 CTX corruption WA") References: 2248a283 ("drm/i915/gen8+: Add RC6 CTX corruption WA") Signed-off-by:
-
Chris Wilson authored
In the next patch, we will introduce a new asynchronous retirement worker, fed by execlists CS events. Here we may queue a retirement as soon as a request is submitted to HW (and completes instantly), and we also want to process that retirement as early as possible and cannot afford to postpone (as there may not be another opportunity to retire it for a few seconds). To allow the new async retirer to run in parallel with our submission, pull the __i915_request_queue (that passes the request to HW) inside the timelines spinlock so that the retirement cannot release the timeline before we have completed the submission. v2: Actually to play nicely with engine_retire, we have to raise the timeline.active_lock before releasing the HW. intel_gt_retire_requsts() is still serialised by the outer lock so they cannot see this intermediate state, and engine_retire is serialised by HW submission. Signed-off-by:
-
Chris Wilson authored
I rushed a last minute correction to cancel_port_requests() to prevent the snooping of *execlists->active as the inflight array was being updated, without noticing we iterated the inflight array starting from active! Oops. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=112387 Fixes: 97f9af78 ("drm/i915/gt: Mark the execlists->active as the primary volatile access") Signed-off-by:
Andi Shyti <andi.shyti@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191125112520.1760492-1-chris@chris-wilson.co.uk (cherry picked from commit da0ef77e) [Joonas: Fixed Fixes: tag to match drm-intel-next-fixes] Signed-off-by:
-
Chris Wilson authored
Since we want to do a lockless read of the current active request, and that request is written to by process_csb also without serialisation, we need to instruct gcc to take care in reading the pointer itself. Otherwise, we have observed execlists_active() to report 0x40. [ 2400.760381] igt/para-4098 1..s. 2376479300us : process_csb: rcs0 cs-irq head=3, tail=4 [ 2400.760826] igt/para-4098 1..s. 2376479303us : process_csb: rcs0 csb[4]: status=0x00000001:0x00000000 [ 2400.761271] igt/para-4098 1..s. 2376479306us : trace_ports: rcs0: promote { b9c59:2622, b9c55:2624 } [ 2400.761726] igt/para-4097 0d... 2376479311us : __i915_schedule: rcs0: -2147483648->3, inflight:0000000000000040, rq:ffff888208c1e940 which is impossible! The answer is that as we keep the existing execlists->active pointing into the array as we copy over that array, the unserialised read may see a partial pointer value. Fixes: df403069 ("drm/i915/execlists: Lift process_csb() out of the irq-off spinlock") Signed-off-by:Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191125094318.1630806-1-chris@chris-wilson.co.uk (cherry picked from commit 331bf905) Signed-off-by:
-
Chris Wilson authored
In commit a79ca656 ("drm/i915: Push the wakeref->count deferral to the backend"), I erroneously concluded that we last modify the engine inside __i915_request_commit() meaning that we could enable concurrent submission for userspace as we enqueued this request. However, this falls into a trap with other users of the engine->kernel_context waking up and submitting their request before the idle-switch is queued, with the result that the kernel_context is executed out-of-sequence most likely upsetting the GPU and certainly ourselves when we try to retire the out-of-sequence requests. As such we need to hold onto the effective engine->kernel_context mutex lock (via the engine pm mutex proxy) until we have finish queuing the request to the engine. v2: Serialise against concurrent intel_gt_retire_requests() v3: Describe the hairy locking scheme with intel_gt_retire_requests() for future reference. v4: Combine timeline->lock and engine pm release; it's hairy. Fixes: a79ca656 ("drm/i915: Push the wakeref->count deferral to the backend") Signed-off-by:
-
Chris Wilson authored
The general concept was that intel_timeline.active_count was locked by the intel_timeline.mutex. The exception was for power management, where the engine->kernel_context->timeline could be manipulated under the global wakeref.mutex. This was quite solid, as we always manipulated the timeline only while we held an engine wakeref. And then we started retiring requests outside of struct_mutex, only using the timelines.active_list and the timeline->mutex. There we started manipulating intel_timeline.active_count outside of an engine wakeref, and so introduced a race between __engine_park() and intel_gt_retire_requests(), a race that could result in the engine->kernel_context not being added to the active timelines and so losing requests, which caused us to keep the system permanently powered up [and unloadable]. The race would be easy to close if we could take the engine wakeref for the timeline before we retire -- except timelines are not bound to any engine and so we would need to keep all active engines awake. The alternative is to guard intel_timeline_enter/intel_timeline_exit for use outside of the timeline->mutex. Fixes: e5dadff4 ("drm/i915: Protect request retirement with timeline->mutex") Signed-off-by:
-
Chris Wilson authored
Previously, we assumed we could use mutex_trylock() within an atomic context, falling back to a worker if contended. However, such trickery is illegal inside interrupt context, and so we need to always use a worker under such circumstances. As we normally are in process context, we can typically use a plain mutex, and only defer to a work when we know we are being called from an interrupt path. Fixes: 51fbd8de ("drm/i915/pmu: Atomically acquire the gt_pm wakeref") References: a0855d24 ("locking/mutex: Complain upon mutex API misuse in IRQ contexts") References: https://bugs.freedesktop.org/show_bug.cgi?id=111626Signed-off-by:
-
Chris Wilson authored
When waiting for idle, serialise with any ongoing callback so that it will have completed before completing the wait. Signed-off-by:
-
Chris Wilson authored
pm_suspend_target_state is declared under CONFIG_PM_SLEEP but only defined under CONFIG_SUSPEND. Play safe and only use the symbol if it is both declared and defined. Reported-by: kbuild-all@lists.01.org Signed-off-by:
-
Tvrtko Ursulin authored
Commit 750e76b4 ("drm/i915/gt: Move the [class][inst] lookup for engines onto the GT") changed the engine query to iterate over uabi engines but left the buffer size calculation look at the physical engine count. Difference has no practical consequence but it is nicer to align both queries. Signed-off-by:
-
Matt Roper authored
The bspec initially provided a single DKL PHY vswing table for both HDMI and DP, but was recently updated to include an independent table for HDMI. Bspec: 49292 Fixes: 978c3e53 ("drm/i915/tgl: Add dkl phy programming sequences") Cc: Clinton A Taylor <clinton.a.taylor@intel.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by:
Matt Roper <matthew.d.roper@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191118180219.9309-1-matthew.d.roper@intel.comReviewed-by:
José Roberto de Souza <jose.souza@intel.com> (cherry picked from commit 362bfb99) Signed-off-by:
-
