- 27 Jun, 2011 10 commits
-
-
Eliad Peller authored
crc7 is used only in wl12xx_spi. Remove redundant crc7.h includes, and update Kconfig to select CRC7 only if WL12XX_SPI is being selected. Signed-off-by:
Eliad Peller <eliad@wizery.com> Signed-off-by:
Luciano Coelho <coelho@ti.com>
-
Shahar Levi authored
Beacon early termination doesn't help much in the 5GHz band and masks channel switch IE Beacons. Thus, change the code to use BET only in 2.4GHz. [Reworded the commit log slightly -- Luca.] Signed-off-by:
Shahar Levi <shahar_levi@ti.com> Signed-off-by:
-
Eliad Peller authored
Allow control over rx_streaming interval and operation mode (always/only on coex) via debugfs. e.g. echo 100 > /debug/ieee80211/phy0/wl12xx/rx_streaming/interval echo 1 > /debug/ieee80211/phy0/wl12xx/rx_streaming/always Signed-off-by:
-
Eliad Peller authored
When rx_streaming.interval is non-zero, use automatic rx streaming. Enable rx streaming on the each rx/tx packet, and disable it rx_streaming.duration msecs later. When rx_streaming.always=0 (default), rx streaming is enabled only when there is a coex operation. Signed-off-by:
-
Eliad Peller authored
wl12xx supports the "rx streaming" feature: When in ps mode, and @timeout msecs have been passed since the last rx/tx, it issues trigger packets (QoS-null/PS-Poll packets, according to the ac type) in const intervals (in order to reduce the rx time). Signed-off-by:
-
Felipe Balbi authored
Those have little value. Remove those to make the driver less noisy. Signed-off-by:
Felipe Balbi <balbi@ti.com> Signed-off-by:
-
Felipe Balbi authored
Nops aren't needed. When we actually need those calls, then we add them with meat and barbecue sauce. Signed-off-by:
-
Felipe Balbi authored
->init and ->reset are optional - at least sdio.c doesn't implement them - so allow those pointers to be NULL. Signed-off-by:
-
Felipe Balbi authored
Those have little value. Remove those to make the driver less noisy. Signed-off-by:
-
Felipe Balbi authored
That's only needed during init anyway, let's free some space after we're done probing. Signed-off-by:
-
- 22 Jun, 2011 30 commits
-
-
Hauke Mehrtens authored
Two functions in ssb are using register_pci_controller() which is __devinit. The functions ssb_pcicore_init_hostmode() and ssb_gige_probe() should also be __devinit. This fixes the following warning: WARNING: vmlinux.o(.text+0x2727b8): Section mismatch in reference from the function ssb_pcicore_init_hostmode() to the function .devinit.text:register_pci_controller() The function ssb_pcicore_init_hostmode() references the function __devinit register_pci_controller(). This is often because ssb_pcicore_init_hostmode lacks a __devinit annotation or the annotation of register_pci_controller is wrong. WARNING: vmlinux.o(.text+0x273398): Section mismatch in reference from the function ssb_gige_probe() to the function .devinit.text:register_pci_controller() The function ssb_gige_probe() references the function __devinit register_pci_controller(). This is often because ssb_gige_probe lacks a __devinit annotation or the annotation of register_pci_controller is wrong. Reported-by:
Ralf Baechle <ralf@linux-mips.org> Signed-off-by:
Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by:
John W. Linville <linville@tuxdriver.com>
-
Gabor Juhos authored
Signed-off-by:
Gabor Juhos <juhosg@openwrt.org> Signed-off-by:
-
Gabor Juhos authored
The patch adds a callback to ath9k_platform_data. If the callback is provided by the platform code, then it can be used to hard reset the WMAC device. The callback is required for doing a hard reset of the AR9330 chips to get them working again after a hang. Signed-off-by:
-
Gabor Juhos authored
Signed-off-by:
-
Gabor Juhos authored
Signed-off-by:
-
Gabor Juhos authored
Signed-off-by:
-
Gabor Juhos authored
Signed-off-by:
-
Gabor Juhos authored
The patch adds the missing configuration code for diversity group 1. Signed-off-by:
-
Gabor Juhos authored
Also remove two empty lines. Signed-off-by:
-
Gabor Juhos authored
The current values must be used only on AR9485 chips. Other chips requires different values. Signed-off-by:
-
Gabor Juhos authored
The 'ar9003_hw_antdiv_comb_conf_get' function sets div_group to 2 however that value is not used in 'ath_ant_div_comb_alt_check'. Signed-off-by:
-
Gabor Juhos authored
The AR9330 is a single stream chip. Signed-off-by:
-
Gabor Juhos authored
Signed-off-by:
-
Gabor Juhos authored
Signed-off-by:
-
Gabor Juhos authored
Signed-off-by:
-
Gabor Juhos authored
Signed-off-by:
-
Gabor Juhos authored
Signed-off-by:
-
Gabor Juhos authored
Signed-off-by:
-
Gabor Juhos authored
Signed-off-by:
-
Gabor Juhos authored
Signed-off-by:
-
Gabor Juhos authored
A multiplication is missing from the current formula. Cc: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by:
-
Gabor Juhos authored
Signed-off-by:
-
Gabor Juhos authored
Signed-off-by:
-
Gabor Juhos authored
Signed-off-by:
-
Gabor Juhos authored
Signed-off-by:
-
Gabor Juhos authored
Signed-off-by:
-
Gabor Juhos authored
Signed-off-by:
-
Gabor Juhos authored
Signed-off-by:
-
Gabor Juhos authored
Signed-off-by:
-
Gabor Juhos authored
Signed-off-by:
-
