- 19 Sep, 2009 40 commits
-
-
Guennadi Liakhovetski authored
Remove .set_std() method from struct soc_camera_ops, use .s_std() from struct v4l2_subdev_core_ops instead. Signed-off-by:
Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by:
Mauro Carvalho Chehab <mchehab@redhat.com>
-
Guennadi Liakhovetski authored
Patch [PATCH] video: use videobuf_waiton() in sh_mobile_ceu free_buffer() was not quite correct. It closed a race, but introduced a potential lock-up, if for some reason an interrupt does not come. This has been observed in tests with tw9910. This patch safely dequeues buffers without waiting for their completion. It also moves a buffer state assignment under a spinlock to make it atomic with queuing of the buffer. Signed-off-by:
-
Guennadi Liakhovetski authored
The move of format translation initialisation into soc_camera_open() was temporary for the soc-camera as platform driver intermediate step, put it back into soc_camera_probe(). Also add a .put_formats() method to soc_camera_host_ops to free any resources host driver might have allocated in .get_formats(). Signed-off-by:
-
Guennadi Liakhovetski authored
V4L2 drivers are allowed to configure a geometry different than what has been requested by the user with S_CROP, but then they have to adjust the input rectangle accordingly. Fix ov772x to comply with this requirement. Signed-off-by:
-
Guennadi Liakhovetski authored
1. soc-camera always requests a valid rectangle, when calling .s_fmt(), no need to check and adjust 2. in .s_crop(), if the rectangle exceeds sensor limits, push it to the respective border instead of centering 3. take into account left and top borders when checking Signed-off-by:
-
Guennadi Liakhovetski authored
Signed-off-by:
-
Guennadi Liakhovetski authored
Switch to using struct v4l2_rect in struct soc_camera_device for uniformity and simplicity. Signed-off-by:
-
Guennadi Liakhovetski authored
Use the V4L2_CID_SHARPNESS control to switch SH-mobile camera low-pass filter. Signed-off-by:
-
Guennadi Liakhovetski authored
Until now soc-camera only supported client (sensor) controls. This patch enables camera-host drivers to implement their own controls too. Signed-off-by:
-
Guennadi Liakhovetski authored
The V4L2_CID_BAND_STOP_FILTER control is used to switch the "Banding Filter" on OV772x cameras on and off and to set the minimum AEC value in BDBASE register. Signed-off-by:
-
Guennadi Liakhovetski authored
Add a new V4L2_CID_BAND_STOP_FILTER integer control, which either switches the band-stop filter off, or sets it to a certain strength. Signed-off-by:
-
Guennadi Liakhovetski authored
Convert the soc-camera framework to use the v4l2-(sub)dev API. Start using v4l2-subdev operations. Only a part of the interface between the soc_camera core, soc_camera host drivers on one side and soc_camera device drivers on the other side is replaced so far. The rest of the interface will be replaced in incremental steps, and will require extensions and, possibly, modifications to the v4l2-subdev code. Signed-off-by:
-
Guennadi Liakhovetski authored
We will be registering and unregistering the soc_camera_platform platform device multiple times, therefore we need a .release() method and have to nullify the kobj. Signed-off-by:
Paul Mundt <lethal@linux-sh.org> Signed-off-by:
-
Guennadi Liakhovetski authored
Signed-off-by:
-
Guennadi Liakhovetski authored
Update ap325rxa to specify .bus_id in struct soc_camera_link explicitly, remove unused .iface from struct soc_camera_platform_info. Signed-off-by:
-
Guennadi Liakhovetski authored
Convert soc-camera core and all drivers to platform device API. We already converted platforms to register a platform device for each soc-camera client, now we remove the compatibility code and switch completely to the new scheme. This is a preparatory step for the v4l2-subdev conversion. Signed-off-by:
-
Guennadi Liakhovetski authored
Add a struct device pointer to struct soc_camera_platform_info and let the user (ap325rxa) pass it down to soc_camera_platform.c in its .add_device() method. Signed-off-by:
-
Guennadi Liakhovetski authored
soc_camera_platform.c is only used by y SuperH ap325rxa board. This patch converts soc_camera_platform.c and its users for the soc-camera platform- device conversion and also extends soc-camera core to handle non-I2C cameras. Cc: Paul Mundt <lethal@linux-sh.org> Signed-off-by:
-
Muralidharan Karicheri authored
This adds Makefile and Kconfig changes to build vpfe capture driver. Reviewed by: Laurent Pinchart <laurent.pinchart@skynet.be> Signed-off-by:
Muralidharan Karicheri <m-karicheri2@ti.com> Signed-off-by:
Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by:
-
Chaithrika U S authored
In the platform header file, the subdev_info structure name has been changed to vpif_subdev_info. Update this change in the driver too. Applies to v4l-dvb repository. Signed-off-by:
Chaithrika U S <chaithrika@ti.com> Signed-off-by:
-
Muralidharan Karicheri authored
This is a new module added for vpss library functions that are used for configuring vpss system module. All video drivers will include vpss.h header file and call functions defined in this module to configure vpss system module. Reviewed by: Hans Verkuil <hverkuil@xs4all.nl> Reviewed by: Laurent Pinchart <laurent.pinchart@skynet.be> Reviewed by: Alexey Klimov <klimov.linux@gmail.com> Signed-off-by:
-
Muralidharan Karicheri authored
common types used across CCDC modules Reviewed by: Hans Verkuil <hverkuil@xs4all.nl> Reviewed by: Laurent Pinchart <laurent.pinchart@skynet.be> Signed-off-by:
-
Muralidharan Karicheri authored
This is the hw module for DM644x CCDC. This registers with the vpfe capture driver and provides a set of hw_ops to configure CCDC for a specific decoder device connected to the VPFE. Reviewed by: Hans Verkuil <hverkuil@xs4all.nl> Reviewed by: Laurent Pinchart <laurent.pinchart@skynet.be> Signed-off-by:
-
Muralidharan Karicheri authored
Adds ccdc hw module for DM355 CCDC. This registers with the bridge driver a set of hw_ops for configuring the CCDC for a specific decoder device connected to vpfe. Reviewed by: Hans Verkuil <hverkuil@xs4all.nl> Reviewed by: Laurent Pinchart <laurent.pinchart@skynet.be> Reviewed by: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by:
-
Muralidharan Karicheri authored
Adds ccdc hw device header for vpfe capture driver Reviewed by: Hans Verkuil <hverkuil@xs4all.nl> Reviewed by: Laurent Pinchart <laurent.pinchart@skynet.be> Signed-off-by:
-
Muralidharan Karicheri authored
This the vpfe capture bridge driver for doing video capture on DM355 and DM6446 evms. The ccdc hw modules register with the driver and are used for configuring the CCD Controller for a specific decoder interface. The driver also registers the sub devices required for a specific evm. More than one sub devices can be registered. This allows driver to switch dynamically to capture video from any sub device that is registered. Currently only one sub device (tvp5146) is supported. But in future this driver is expected to do capture from sensor devices such as Micron's MT9T001, MT9T031 and MT9P031 etc. The driver currently supports MMAP based IO. Reviewed by: Laurent Pinchart <laurent.pinchart@skynet.be> Reviewed by: Alexey Klimov <klimov.linux@gmail.com> Signed-off-by:
-
Muralidharan Karicheri authored
Fix documentation style based on comments from Mauro. Reviewed by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by:
-
Muralidharan Karicheri authored
This patch converts TVP514x driver to sub-device framework from V4L2-int framework. [hverkuil@xs4all.nl: remove inline from the dump_reg function] Signed-off-by:
Brijesh Jadav <brijesh.j@ti.com> Signed-off-by:
Hardik Shah <hardik.shah@ti.com> Signed-off-by:
Vaibhav Hiremath <hvaibhav@ti.com> Signed-off-by:
-
Huang Weiyi authored
Remove unused #include <linux/version.h>'s in drivers/media/video/adv7343.c. Cc: Chaithrika U S <chaithrika@ti.com> Signed-off-by:
Huang Weiyi <weiyi.huang@gmail.com> Signed-off-by:
Douglas Schilling Landgraf <dougsland@redhat.com> Signed-off-by:
-
Chaithrika U S authored
mutex_lock_interruptible return value has to be handled properly to indicate the status to the higher layers of the kernel. Signed-off-by:
-
Chaithrika U S authored
Makefile and Kconfig changes for DM646x Video Display device, using davinci/vpif, adv7343 and ths7303 drivers. Signed-off-by:
Manjunath Hadli <mrh@ti.com> Signed-off-by:
-
Chaithrika U S authored
Adds the VPIF display driver and the associated header file. Signed-off-by:
-
Chaithrika U S authored
This code be used by the display and capture drivers. Signed-off-by:
-
Erik Andrén authored
Red and blue gain isn't handled in conformance with the v4l2 specification. Disable them for now. Signed-off-by:
Erik Andrén <erik.andren@gmail.com> Signed-off-by:
-
Erik Andrén authored
Signed-off-by:
-
Erik Andrén authored
Don't set blue and red gain during init as we manuall set it later Signed-off-by:
-
Erik Andrén authored
We manually set the gain later, no need to do it during init Signed-off-by:
-
Erik Andrén authored
Signed-off-by:
-
Erik Andrén authored
Signed-off-by:
-
Erik Andrén authored
Signed-off-by:
-
