- 04 Mar, 2019 40 commits
-
-
Arnd Bergmann authored
When CONFIG_SYSCTL is turned off, we get a link failure for the newly introduced tuning knob. net/ipv6/addrconf.o: In function `addrconf_init_net': addrconf.c:(.text+0x31dc): undefined reference to `sysctl_devconf_inherit_init_net' Add an IS_ENABLED() check to fall back to the default behavior (sysctl_devconf_inherit_init_net=0) here. Fixes: 856c395c ("net: introduce a knob to control whether to inherit devconf config") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Acked-by:
Christian Brauner <christian@brauner.io> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Arnd Bergmann authored
MDIO_BUS_MUX can only be selected if OF_MDIO is already turned on: WARNING: unmet direct dependencies detected for MDIO_BUS_MUX Depends on [n]: NETDEVICES [=y] && MDIO_BUS [=m] && OF_MDIO [=n] Selected by [m]: - MDIO_BUS_MUX_MULTIPLEXER [=m] && NETDEVICES [=y] && MDIO_BUS [=m] && OF [=y] Fixes: 7865ad65 ("drivers: net: phy: mdio-mux: Add support for Generic Mux controls") Signed-off-by:
-
Heiner Kallweit authored
As can be seen from the usage of the return value, we should use phy_modify_mmd_changed() here. Fixes: 9a5dc8af ("net: phy: add genphy_c45_an_config_aneg") Signed-off-by:
Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by:
-
Heiner Kallweit authored
In the original patch I missed to add mv88e6xxx_ports_cmode_init() to the second probe function, the one for the new DSA framework. Fixes: ed8fe202 ("net: dsa: mv88e6xxx: prevent interrupt storm caused by mv88e6390x_port_set_cmode") Reported-by:
Shaokun Zhang <zhangshaokun@hisilicon.com> Suggested-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
Souptick Joarder authored
Remove duplicate header which is included twice. Signed-off-by:
Sabyasachi Gupta <sabyasachi.linux@gmail.com> Signed-off-by:
Souptick Joarder <jrdr.linux@gmail.com> Signed-off-by:
-
Kai-Heng Feng authored
Some sky2 chips fire IRQ after S3, before the driver is fully resumed: [ 686.804877] do_IRQ: 1.37 No irq handler for vector This is likely a platform bug that device isn't fully quiesced during S3. Use MSI-X, maskable MSI or INTx can prevent this issue from happening. Since MSI-X and maskable MSI are not supported by this device, fallback to use INTx on affected platforms. BugLink: https://bugs.launchpad.net/bugs/1807259 BugLink: https://bugs.launchpad.net/bugs/1809843Signed-off-by:
Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by:
-
David S. Miller authored
Eran Ben Elisha says: ==================== Devlink health updates This patchset includes a fix [patch 01] to the devlink health state update, in case recover was aborted. In addition, it includes a small enhancement to the infrastructure in order to allow direct state update in run-time, and use it from mlx5e tx reporter. ==================== Signed-off-by: -
Eran Ben Elisha authored
Once channels were successfully opened, update tx reporter health state to healthy. This is needed for the following scenario: - SQ has an un-recovered error reported to the devlink health, resulting tx reporter state to be error. - Current channels (including this SQ) are closed - New channels are opened After that flow, the original error was "solved", and tx reporter state should be healthy. However, as it was resolved as a side effect, and not via tx reporter recover method, driver needs to inform devlink health about it. Signed-off-by:
Eran Ben Elisha <eranbe@mellanox.com> Acked-by:
Jiri Pirko <jiri@mellanox.com> Acked-by:
Saeed Mahameed <saeedm@mellanox.com> Signed-off-by:
-
Eran Ben Elisha authored
It is possible that a reporter state will be updated due to a recover flow which is not triggered by a devlink health related operation, but as a side effect of some other operation in the system. Expose devlink health API for a direct update of a reporter status. Move devlink_health_reporter_state enum definition to devlink.h so it could be used from drivers as a parameter of devlink_health_reporter_state_update. In addition, add trace_devlink_health_reporter_state_update to provide user notification for reporter state change. Signed-off-by:
-
Eran Ben Elisha authored
If devlink_health_report() aborted the recover flow due to grace period checker, it left the reporter status as DEVLINK_HEALTH_REPORTER_STATE_HEALTHY, which is a bug. Fix that by always setting the reporter state to DEVLINK_HEALTH_REPORTER_STATE_ERROR prior to running the checker mentioned above. In addition, save the previous health_state in a temporary variable, then use it in the abort check comparison instead of using reporter->health_state which might be already changed. Fixes: c8e1da0b ("devlink: Add health report functionality") Signed-off-by:
-
Xin Long authored
The user msg is also copied to the abort packet when doing SCTP_ABORT in sctp_sendmsg_check_sflags(). When SCTP_SENDALL is set, iov_iter_revert() should have been called for sending abort on the next asoc with copying this msg. Otherwise, memcpy_from_msg() in sctp_make_abort_user() will fail and return error. Fixes: 49102805 ("sctp: add support for snd flag SCTP_SENDALL process in sendmsg") Reported-by:
Ying Xu <yinxu@redhat.com> Signed-off-by:
Xin Long <lucien.xin@gmail.com> Acked-by:
Neil Horman <nhorman@tuxdriver.com> Signed-off-by:
-
Ido Schimmel authored
When team is used in loadbalance mode a BPF filter can be used to provide a hash which will determine the Tx port. When the netdev is later unregistered the filter is not freed which results in memory leaks [1]. Fix by freeing the program and the corresponding filter when unregistering the netdev. [1] unreferenced object 0xffff8881dbc47cc8 (size 16): comm "teamd", pid 3068, jiffies 4294997779 (age 438.247s) hex dump (first 16 bytes): a3 00 6b 6b 6b 6b 6b 6b 88 a5 82 e1 81 88 ff ff ..kkkkkk........ backtrace: [<000000008a3b47e3>] team_nl_cmd_options_set+0x88f/0x11b0 [<00000000c4f4f27e>] genl_family_rcv_msg+0x78f/0x1080 [<00000000610ef838>] genl_rcv_msg+0xca/0x170 [<00000000a281df93>] netlink_rcv_skb+0x132/0x380 [<000000004d9448a2>] genl_rcv+0x29/0x40 [<000000000321b2f4>] netlink_unicast+0x4c0/0x690 [<000000008c25dffb>] netlink_sendmsg+0x929/0xe10 [<00000000068298c5>] sock_sendmsg+0xc8/0x110 [<0000000082a61ff0>] ___sys_sendmsg+0x77a/0x8f0 [<00000000663ae29d>] __sys_sendmsg+0xf7/0x250 [<0000000027c5f11a>] do_syscall_64+0x14d/0x610 [<000000006cfbc8d3>] entry_SYSCALL_64_after_hwframe+0x49/0xbe [<00000000e23197e2>] 0xffffffffffffffff unreferenced object 0xffff8881e182a588 (size 2048): comm "teamd", pid 3068, jiffies 4294997780 (age 438.247s) hex dump (first 32 bytes): 20 00 00 00 02 00 00 00 30 00 00 00 28 f0 ff ff .......0...(... 07 00 00 00 00 00 00 00 28 00 00 00 00 00 00 00 ........(....... backtrace: [<000000002daf01fb>] lb_bpf_func_set+0x45c/0x6d0 [<000000008a3b47e3>] team_nl_cmd_options_set+0x88f/0x11b0 [<00000000c4f4f27e>] genl_family_rcv_msg+0x78f/0x1080 [<00000000610ef838>] genl_rcv_msg+0xca/0x170 [<00000000a281df93>] netlink_rcv_skb+0x132/0x380 [<000000004d9448a2>] genl_rcv+0x29/0x40 [<000000000321b2f4>] netlink_unicast+0x4c0/0x690 [<000000008c25dffb>] netlink_sendmsg+0x929/0xe10 [<00000000068298c5>] sock_sendmsg+0xc8/0x110 [<0000000082a61ff0>] ___sys_sendmsg+0x77a/0x8f0 [<00000000663ae29d>] __sys_sendmsg+0xf7/0x250 [<0000000027c5f11a>] do_syscall_64+0x14d/0x610 [<000000006cfbc8d3>] entry_SYSCALL_64_after_hwframe+0x49/0xbe [<00000000e23197e2>] 0xffffffffffffffff Fixes: 01d7f30a ("team: add loadbalance mode") Signed-off-by:Ido Schimmel <idosch@mellanox.com> Reported-by:
Amit Cohen <amitc@mellanox.com> Acked-by:
-
Ido Schimmel authored
Similar to commit 44f49dd8 ("ipmr: fix possible race resulting from improper usage of IP_INC_STATS_BH() in preemptible context."), we cannot assume preemption is disabled when incrementing the counter and accessing a per-CPU variable. Preemption can be enabled when we add a route in process context that corresponds to packets stored in the unresolved queue, which are then forwarded using this route [1]. Fix this by using IP6_INC_STATS() which takes care of disabling preemption on architectures where it is needed. [1] [ 157.451447] BUG: using __this_cpu_add() in preemptible [00000000] code: smcrouted/2314 [ 157.460409] caller is ip6mr_forward2+0x73e/0x10e0 [ 157.460434] CPU: 3 PID: 2314 Comm: smcrouted Not tainted 5.0.0-rc7-custom-03635-g22f2712113f1 #1336 [ 157.460449] Hardware name: Mellanox Technologies Ltd. MSN2100-CB2FO/SA001017, BIOS 5.6.5 06/07/2016 [ 157.460461] Call Trace: [ 157.460486] dump_stack+0xf9/0x1be [ 157.460553] check_preemption_disabled+0x1d6/0x200 [ 157.460576] ip6mr_forward2+0x73e/0x10e0 [ 157.460705] ip6_mr_forward+0x9a0/0x1510 [ 157.460771] ip6mr_mfc_add+0x16b3/0x1e00 [ 157.461155] ip6_mroute_setsockopt+0x3cb/0x13c0 [ 157.461384] do_ipv6_setsockopt.isra.8+0x348/0x4060 [ 157.462013] ipv6_setsockopt+0x90/0x110 [ 157.462036] rawv6_setsockopt+0x4a/0x120 [ 157.462058] __sys_setsockopt+0x16b/0x340 [ 157.462198] __x64_sys_setsockopt+0xbf/0x160 [ 157.462220] do_syscall_64+0x14d/0x610 [ 157.462349] entry_SYSCALL_64_after_hwframe+0x49/0xbe Fixes: 0912ea38 ("[IPV6] MROUTE: Add stats in multicast routing module method ip6_mr_forward().") Signed-off-by:
-
Aditya Pakki authored
Allocating memory via kzalloc for phi may fail and causes a NULL pointer dereference. This patch avoids such a scenario. Signed-off-by:
Aditya Pakki <pakki001@umn.edu> Signed-off-by:
-
Heiner Kallweit authored
If an external PHY is connected via SGMII and uses in-band signalling then the auto-negotiated values aren't propagated to the port, resulting in a broken link. See discussion in [0]. This patch adds this propagation. We need to call mv88e6xxx_port_setup_mac(), therefore export it from chip.c. Successfully tested on a ZII DTU with 88E6390 switch and an Aquantia AQCS109 PHY connected via SGMII to port 9. [0] https://marc.info/?t=155130287200001&r=1&w=2Signed-off-by:
-
Arjun Vynipadath authored
Some of these macros were conflicting with global namespace, hence prefixing them with CXGB4. Signed-off-by:
Arjun Vynipadath <arjun@chelsio.com> Signed-off-by:
Vishal Kulkarni <vishal@chelsio.com> Signed-off-by:
-
Andy Shevchenko authored
Switch to bitmap_zalloc() to show clearly what we are allocating. Besides that it returns pointer of bitmap type instead of opaque void *. Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
-
Andy Shevchenko authored
Switch to bitmap_zalloc() to show clearly what we are allocating. Besides that it returns pointer of bitmap type instead of opaque void *. Signed-off-by:
Tariq Toukan <tariqt@mellanox.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextDavid S. Miller authored
Daniel Borkmann says: ==================== pull-request: bpf-next 2019-03-04 The following pull-request contains BPF updates for your *net-next* tree. The main changes are: 1) Add AF_XDP support to libbpf. Rationale is to facilitate writing AF_XDP applications by offering higher-level APIs that hide many of the details of the AF_XDP uapi. Sample programs are converted over to this new interface as well, from Magnus. 2) Introduce a new cant_sleep() macro for annotation of functions that cannot sleep and use it in BPF_PROG_RUN() to assert that BPF programs run under preemption disabled context, from Peter. 3) Introduce per BPF prog stats in order to monitor the usage of BPF; this is controlled by kernel.bpf_stats_enabled sysctl knob where monitoring tools can make use of this to efficiently determine the average cost of programs, from Alexei. 4) Split up BPF selftest's test_progs similarly as we already did with test_verifier. This allows to further reduce merge conflicts in future and to get more structure into our quickly growing BPF selftest suite, from Stanislav. 5) Fix a bug in BTF's dedup algorithm which can cause an infinite loop in some circumstances; also various BPF doc fixes and improvements, from Andrii. 6) Various BPF sample cleanups and migration to libbpf in order to further isolate the old sample loader code (so we can get rid of it at some point), from Jakub. 7) Add a new BPF helper for BPF cgroup skb progs that allows to set ECN CE code point and a Host Bandwidth Manager (HBM) sample program for limiting the bandwidth used by v2 cgroups, from Lawrence. 8) Enable write access to skb->queue_mapping from tc BPF egress programs in order to let BPF pick TX queue, from Jesper. 9) Fix a bug in BPF spinlock handling for map-in-map which did not propagate spin_lock_off to the meta map, from Yonghong. 10) Fix a bug in the new per-CPU BPF prog counters to properly initialize stats for each CPU, from Eric. 11) Add various BPF helper prototypes to selftest's bpf_helpers.h, from Willem. 12) Fix various BPF samples bugs in XDP and tracing progs, from Toke, Daniel and Yonghong. 13) Silence preemption splat in test_bpf after BPF_PROG_RUN() enforces it now everywhere, from Anders. 14) Fix a signedness bug in libbpf's btf_dedup_ref_type() to get error handling working, from Dan. 15) Fix bpftool documentation and auto-completion with regards to stream_{verdict,parser} attach types, from Alban. ==================== Signed-off-by: -
Daniel Borkmann authored
Add two additional tests for further asserting the BPF_ALU_NON_POINTER logic with cases that were missed previously. Cc: Marek Majkowski <marek@cloudflare.com> Cc: Arthur Fabre <afabre@cloudflare.com> Acked-by:
Song Liu <songliubraving@fb.com> Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net>
-
David S. Miller authored
Ido Schimmel says: ==================== mlxsw: minimal: Add ethtool and resource query support Vadim says: The minimal driver is chip independent and uses I2C bus for chip access. Its purpose is to support chassis management on systems equipped with Mellanox switch ASICs. For example, from a BMC (Board Management Controller) device. Patches #1-#3 add ethtool support to the minimal driver so that QSFP/SFP module info could be retrieved by the driver. This is done by exposing a dummy netdev for each front panel port and implementing the required ethtool operations. Patches #4-#8 add resource query support. This allows the driver to query the firmware about values of certain resources (e.g., maximum number of ports). It is required on systems where the maximum number of ports is larger than the hard coded default (64). ==================== Signed-off-by: -
Vadim Pasternak authored
Extend initialization flow by query requests for chip resources data in order to obtain chip's specific capabilities, like the number of ports. Signed-off-by:
Vadim Pasternak <vadimp@mellanox.com> Acked-by:
-
Vadim Pasternak authored
Extend input parameters list of command API in mlxsw_i2c_cmd() in order to support initialization commands. Up until now, only access commands were supported by I2C driver. Signed-off-by:
-
Vadim Pasternak authored
Change input parameter name "resource" to "res" in mlxsw_i2c_init() in order to align it with mlxsw_pci_init(). Signed-off-by:
-
Vadim Pasternak authored
Fix comment for mlxsw_i2c_write_cmd(). Signed-off-by:
-
Vadim Pasternak authored
Move mlxsw_pci_resources_query() to a common location to allow reuse by the different drivers and over all the supported physical buses. Rename it to mlxsw_core_resources_query(). Signed-off-by:
-
Vadim Pasternak authored
The minimal driver is chip independent and uses I2C bus for chip access. Its purpose is to support chassis management on systems equipped with Mellanox switch ASICs. For example from BMC (Board Management Controller) device. Expose a dummy netdev for each front panel port and implement basic ethtool operations to obtain QSFP/SFP module info through ethtool. Signed-off-by:
-
Vadim Pasternak authored
Replace "mlxsw_minimal" by "mlxsw_m" in order to improve code readability. Signed-off-by:
-
Vadim Pasternak authored
Move the implementation of ethtool module callbacks - .get_module_info() and .get_module_eeprom() - to a common location to allow reuse by the different mlxsw drivers. Signed-off-by:
-
David S. Miller authored
Boris Pismenny says: ==================== tls: Fix issues in tls_device This series fixes issues encountered in tls_device code paths, which were introduced recently. Additionally, this series includes a fix for tls software only receive flow, which causes corruption of payload received by user space applications. This series was tested using the OpenSSL integration of KTLS - https://github.com/mellan ==================== Signed-off-by:
-
Boris Pismenny authored
Currently, the receive function fails to handle records already decrypted by the device due to the commit mentioned below. This commit advances the TLS record sequence number and prepares the context to handle the next record. Fixes: fedf201e ("net: tls: Refactor control message handling on recv") Signed-off-by:
Boris Pismenny <borisp@mellanox.com> Reviewed-by:
-
Eran Ben Elisha authored
Today, tls_sw_recvmsg is capable of using asynchronous mode to handle application data TLS records. Moreover, it assumes that if the cipher can be handled asynchronously, then all packets will be processed asynchronously. However, this assumption is not always true. Specifically, for AES-GCM in TLS1.2, it causes data corruption, and breaks user applications. This patch fixes this problem by separating the async capability from the decryption operation result. Fixes: c0ab4732 ("net/tls: Do not use async crypto for non-data records") Signed-off-by:
-
Boris Pismenny authored
TLS device cannot use the sw context. This patch returns the original tls device write space handler and moves the sw/device specific portions to the relevant files. Also, we remove the write_space call for the tls_sw flow, because it handles partial records in its delayed tx work handler. Fixes: a42055e8 ("net/tls: Add support for async encryption of records for performance") Signed-off-by:
-
Boris Pismenny authored
Cleanup the handling of partial records while fixing a bug where the tls_push_pending_closed_record function is using the software tls context instead of the hardware context. The bug resulted in the following crash: [ 88.791229] BUG: unable to handle kernel NULL pointer dereference at 0000000000000000 [ 88.793271] #PF error: [normal kernel read fault] [ 88.794449] PGD 800000022a426067 P4D 800000022a426067 PUD 22a156067 PMD 0 [ 88.795958] Oops: 0000 [#1] SMP PTI [ 88.796884] CPU: 2 PID: 4973 Comm: openssl Not tainted 5.0.0-rc4+ #3 [ 88.798314] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 [ 88.800067] RIP: 0010:tls_tx_records+0xef/0x1d0 [tls] [ 88.801256] Code: 00 02 48 89 43 08 e8 a0 0b 96 d9 48 89 df e8 48 dd 4d d9 4c 89 f8 4d 8b bf 98 00 00 00 48 05 98 00 00 00 48 89 04 24 49 39 c7 <49> 8b 1f 4d 89 fd 0f 84 af 00 00 00 41 8b 47 10 85 c0 0f 85 8d 00 [ 88.805179] RSP: 0018:ffffbd888186fca8 EFLAGS: 00010213 [ 88.806458] RAX: ffff9af1ed657c98 RBX: ffff9af1e88a1980 RCX: 0000000000000000 [ 88.808050] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff9af1e88a1980 [ 88.809724] RBP: ffff9af1e88a1980 R08: 0000000000000017 R09: ffff9af1ebeeb700 [ 88.811294] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 [ 88.812917] R13: ffff9af1e88a1980 R14: ffff9af1ec13f800 R15: 0000000000000000 [ 88.814506] FS: 00007fcad2240740(0000) GS:ffff9af1f7880000(0000) knlGS:0000000000000000 [ 88.816337] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 88.817717] CR2: 0000000000000000 CR3: 0000000228b3e000 CR4: 00000000001406e0 [ 88.819328] Call Trace: [ 88.820123] tls_push_data+0x628/0x6a0 [tls] [ 88.821283] ? remove_wait_queue+0x20/0x60 [ 88.822383] ? n_tty_read+0x683/0x910 [ 88.823363] tls_device_sendmsg+0x53/0xa0 [tls] [ 88.824505] sock_sendmsg+0x36/0x50 [ 88.825492] sock_write_iter+0x87/0x100 [ 88.826521] __vfs_write+0x127/0x1b0 [ 88.827499] vfs_write+0xad/0x1b0 [ 88.828454] ksys_write+0x52/0xc0 [ 88.829378] do_syscall_64+0x5b/0x180 [ 88.830369] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 88.831603] RIP: 0033:0x7fcad1451680 [ 1248.470626] BUG: unable to handle kernel NULL pointer dereference at 0000000000000000 [ 1248.472564] #PF error: [normal kernel read fault] [ 1248.473790] PGD 0 P4D 0 [ 1248.474642] Oops: 0000 [#1] SMP PTI [ 1248.475651] CPU: 3 PID: 7197 Comm: openssl Tainted: G OE 5.0.0-rc4+ #3 [ 1248.477426] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 [ 1248.479310] RIP: 0010:tls_tx_records+0x110/0x1f0 [tls] [ 1248.480644] Code: 00 02 48 89 43 08 e8 4f cb 63 d7 48 89 df e8 f7 9c 1b d7 4c 89 f8 4d 8b bf 98 00 00 00 48 05 98 00 00 00 48 89 04 24 49 39 c7 <49> 8b 1f 4d 89 fd 0f 84 af 00 00 00 41 8b 47 10 85 c0 0f 85 8d 00 [ 1248.484825] RSP: 0018:ffffaa0a41543c08 EFLAGS: 00010213 [ 1248.486154] RAX: ffff955a2755dc98 RBX: ffff955a36031980 RCX: 0000000000000006 [ 1248.487855] RDX: 0000000000000000 RSI: 000000000000002b RDI: 0000000000000286 [ 1248.489524] RBP: ffff955a36031980 R08: 0000000000000000 R09: 00000000000002b1 [ 1248.491394] R10: 0000000000000003 R11: 00000000ad55ad55 R12: 0000000000000000 [ 1248.493162] R13: 0000000000000000 R14: ffff955a2abe6c00 R15: 0000000000000000 [ 1248.494923] FS: 0000000000000000(0000) GS:ffff955a378c0000(0000) knlGS:0000000000000000 [ 1248.496847] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1248.498357] CR2: 0000000000000000 CR3: 000000020c40e000 CR4: 00000000001406e0 [ 1248.500136] Call Trace: [ 1248.500998] ? tcp_check_oom+0xd0/0xd0 [ 1248.502106] tls_sk_proto_close+0x127/0x1e0 [tls] [ 1248.503411] inet_release+0x3c/0x60 [ 1248.504530] __sock_release+0x3d/0xb0 [ 1248.505611] sock_close+0x11/0x20 [ 1248.506612] __fput+0xb4/0x220 [ 1248.507559] task_work_run+0x88/0xa0 [ 1248.508617] do_exit+0x2cb/0xbc0 [ 1248.509597] ? core_sys_select+0x17a/0x280 [ 1248.510740] do_group_exit+0x39/0xb0 [ 1248.511789] get_signal+0x1d0/0x630 [ 1248.512823] do_signal+0x36/0x620 [ 1248.513822] exit_to_usermode_loop+0x5c/0xc6 [ 1248.515003] do_syscall_64+0x157/0x180 [ 1248.516094] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 1248.517456] RIP: 0033:0x7fb398bd3f53 [ 1248.518537] Code: Bad RIP value. Fixes: a42055e8 ("net/tls: Add support for async encryption of records for performance") Signed-off-by:
-
David S. Miller authored
Heiner Kallweit says: ==================== net: phy: clean up the old gen10g functions The old gen10g_ functions are mainly stubs and have been superseded by genphy_c45_ equivalents. So lets remove / hide the old functions as far as possible. ==================== Signed-off-by: -
Heiner Kallweit authored
genphy_no_soft_reset and gen10g_no_soft_reset are both the same no-ops, one is enough. Signed-off-by:
-
Heiner Kallweit authored
gen10g_read_status is deprecated, therefore stop exporting it. We don't want to encourage anybody to use it. Signed-off-by:
-
Heiner Kallweit authored
ETHTOOL_LINK_MODE_10000baseT_Full_BIT is set anyway in the supported and advertising bitmap because it's part of PHY_10GBIT_FEATURES. And all users of gen10g_config_init use PHY_10GBIT_FEATURES. Signed-off-by:
-
Heiner Kallweit authored
phy_suspend() and phy_resume() are no-ops anyway if no callback is defined. Therefore we don't need these stubs. Signed-off-by:
-
Heiner Kallweit authored
Now that we have it let's use genphy_c45_aneg_done() in phy_aneg_done(). Signed-off-by:
-
