- 20 Jul, 2020 15 commits
-
-
Aneesh Kumar K.V authored
We don't use CPU_FTR_PKEY anymore. Remove the feature bit and mark it free. Signed-off-by:
Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200709032946.881753-9-aneesh.kumar@linux.ibm.com
-
Aneesh Kumar K.V authored
Key 1 is marked reserved by ISA. Setup uamor to prevent userspace modification of the same. Signed-off-by:
-
Aneesh Kumar K.V authored
Add documentation explaining the execute_only_key. The reservation and initialization mask details are also explained in this patch. No functional change in this patch. Signed-off-by:
-
Aneesh Kumar K.V authored
This explains the details w.r.t key 1. Signed-off-by:
-
Aneesh Kumar K.V authored
To keep things simple, all the pkey related bits are kept together in linux page table for 64K config with hash translation. With hash-4k kernel requires 4 bits to store slots details. This is done by overloading some of the RPN bits for storing the slot details. Due to this PKEY_BIT0 on the 4K config is used for storing hash slot details. 64K before |....|RSV1| RSV2| RSV3 | RSV4 | RPN44| RPN43 |.... | RSV5| |....| P4 | P3 | P2 | P1 | Busy | HASHPTE |.... | P0 | after |....|RSV1| RSV2| RSV3 | RSV4 | RPN44 | RPN43 |.... | RSV5 | |....| P4 | P3 | P2 | P1 | P0 | HASHPTE |.... | Busy | 4k before |....| RSV1 | RSV2 | RSV3 | RSV4 | RPN44| RPN43.... | RSV5| |....| Busy | HASHPTE | P2 | P1 | F_SEC| F_GIX.... | P0 | after |....| RSV1 | RSV2| RSV3 | RSV4 | Free | RPN43.... | RSV5 | |....| HASHPTE | P2 | P1 | P0 | F_SEC| F_GIX.... | BUSY | Signed-off-by:
-
Aneesh Kumar K.V authored
Signed-off-by:
-
Aneesh Kumar K.V authored
This number the pkey bit such that it is easy to follow. PKEY_BIT0 is the lower order bit. This makes further changes easy to follow. No functional change in this patch other than linux page table for hash translation now maps pkeys differently. Signed-off-by:
-
Aneesh Kumar K.V authored
We are wrongly using CPU_FTRS_POWER8 to check for P8 support. Instead, we should use PVR value. Now considering we are using CPU_FTRS_POWER8, that implies we returned true for P9 with older firmware. Keep the same behavior by checking for P9 PVR value. Fixes: cf43d3b2 ("powerpc: Enable pkey subsystem") Signed-off-by:
-
Santosh Sivaraj authored
Subscribe to the MCE notification and add the physical address which generated a memory error to nvdimm bad range. Signed-off-by:
Santosh Sivaraj <santosh@fossix.org> Reviewed-by:
Mahesh Salgaonkar <mahesh@linux.ibm.com> Reviewed-by:
Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by:
-
Santosh Sivaraj authored
Introduce notification chain which lets us know about uncorrected memory errors(UE). This would help prospective users in pmem or nvdimm subsystem to track bad blocks for better handling of persistent memory allocations. Signed-off-by:
Ganesh Goudar <ganeshgr@linux.ibm.com> Reviewed-by:
-
Aneesh Kumar K.V authored
To enable memory unplug without splitting kernel page table mapping, we force the max mapping size to the LMB size. LMB size is the unit in which hypervisor will do memory add/remove operation. Pseries systems supports max LMB size of 256MB. Hence on pseries, we now end up mapping memory with 2M page size instead of 1G. To improve that we want hypervisor to hint the kernel about the hotplug memory range. That was added that as part of commit b6eca183 ("powerpc/kernel: Enables memory hot-remove after reboot on pseries guests") But PowerVM doesn't provide that hint yet. Once we get PowerVM updated, we can then force the 2M mapping only to hot-pluggable memory region using memblock_is_hotpluggable(). Till then let's depend on LMB size for finding the mapping page size for linear range. With this change KVM guest will also be doing linear mapping with 2M page size. The actual TLB benefit of mapping guest page table entries with hugepage size can only be materialized if the partition scoped entries are also using the same or higher page size. A guest using 1G hugetlbfs backing guest memory can have a performance impact with the above change. Signed-off-by:
Bharata B Rao <bharata@linux.ibm.com> Signed-off-by:
-
Bharata B Rao authored
We split the page table mapping on memory unplug if the linear range was mapped with huge page mapping (for ex: 1G) The page table splitting code has a few issues: 1. Recursive locking -------------------- Memory unplug path takes cpu_hotplug_lock and calls stop_machine() for splitting the mappings. However stop_machine() takes cpu_hotplug_lock again causing deadlock. 2. BUG: sleeping function called from in_atomic() context --------------------------------------------------------- Memory unplug path (remove_pagetable) takes init_mm.page_table_lock spinlock and later calls stop_machine() which does wait_for_completion() 3. Bad unlock unbalance ----------------------- Memory unplug path takes init_mm.page_table_lock spinlock and calls stop_machine(). The stop_machine thread function runs in a different thread context (migration thread) which tries to release and reaquire ptl. Releasing ptl from a different thread than which acquired it causes bad unlock unbalance. These problems can be avoided if we avoid mapping hot-plugged memory with 1G mapping, thereby removing the need for splitting them during unplug. The kernel always make sure the minimum unplug request is SUBSECTION_SIZE for device memory and SECTION_SIZE for regular memory. In preparation for such a change remove page table splitting support. This essentially is a revert of commit 4dd5f8a9 ("powerpc/mm/radix: Split linear mapping on hot-unplug") Signed-off-by:
-
Bharata B Rao authored
remove_pagetable() isn't freeing PUD table. This causes memory leak during memory unplug. Fix this. Fixes: 4b5d62ca ("powerpc/mm: add radix__remove_section_mapping()") Signed-off-by:
-
Aneesh Kumar K.V authored
We can hit the following BUG_ON during memory unplug: kernel BUG at arch/powerpc/mm/book3s64/pgtable.c:342! Oops: Exception in kernel mode, sig: 5 [#1] LE PAGE_SIZE=64K MMU=Radix SMP NR_CPUS=2048 NUMA pSeries NIP [c000000000093308] pmd_fragment_free+0x48/0xc0 LR [c00000000147bfec] remove_pagetable+0x578/0x60c Call Trace: 0xc000008050000000 (unreliable) remove_pagetable+0x384/0x60c radix__remove_section_mapping+0x18/0x2c remove_section_mapping+0x1c/0x3c arch_remove_memory+0x11c/0x180 try_remove_memory+0x120/0x1b0 __remove_memory+0x20/0x40 dlpar_remove_lmb+0xc0/0x114 dlpar_memory+0x8b0/0xb20 handle_dlpar_errorlog+0xc0/0x190 pseries_hp_work_fn+0x2c/0x60 process_one_work+0x30c/0x810 worker_thread+0x98/0x540 kthread+0x1c4/0x1d0 ret_from_kernel_thread+0x5c/0x74 This occurs when unplug is attempted for such memory which has been mapped using memblock pages as part of early kernel page table setup. We wouldn't have initialized the PMD or PTE fragment count for those PMD or PTE pages. This can be fixed by allocating memory in PAGE_SIZE granularity during early page table allocation. This makes sure a specific page is not shared for another memblock allocation and we can free them correctly on removing page-table pages. Since we now do PAGE_SIZE allocations for both PUD table and PMD table (Note that PTE table allocation is already of PAGE_SIZE), we end up allocating more memory for the same amount of system RAM. Here is a comparision of how much more we need for a 64T and 2G system after this patch: 1. 64T system ------------- 64T RAM would need 64G for vmemmap with struct page size being 64B. 128 PUD tables for 64T memory (1G mappings) 1 PUD table and 64 PMD tables for 64G vmemmap (2M mappings) With default PUD[PMD]_TABLE_SIZE(4K), (128+1+64)*4K=772K With PAGE_SIZE(64K) table allocations, (128+1+64)*64K=12352K 2. 2G system ------------ 2G RAM would need 2M for vmemmap with struct page size being 64B. 1 PUD table for 2G memory (1G mapping) 1 PUD table and 1 PMD table for 2M vmemmap (2M mappings) With default PUD[PMD]_TABLE_SIZE(4K), (1+1+1)*4K=12K With new PAGE_SIZE(64K) table allocations, (1+1+1)*64K=192K Signed-off-by:
-
Nicholas Piggin authored
When '029ab30b ("powerpc/mm: Enable radix GTSE only if supported.")' made GTSE an MMU feature, it was enabled by default in powerpc-cpu-features but was missed in pa-features. This causes random memory corruption during boot of PowerNV kernels where CONFIG_PPC_DT_CPU_FTRS isn't enabled. Fixes: 029ab30b ("powerpc/mm: Enable radix GTSE only if supported.") Reported-by:
Qian Cai <cai@lca.pw> Signed-off-by:
Nicholas Piggin <npiggin@gmail.com> Signed-off-by:
-
- 18 Jul, 2020 1 commit
-
-
Michael Ellerman authored
Merge our fixes branch, primarily to bring in the ebb selftests build fix and the pkey fix, which is a dependency for some future work.
-
- 16 Jul, 2020 24 commits
-
-
Nayna Jain authored
The device-tree properties to check secure and trusted boot state are different for guests (pseries) compared to baremetal (powernv). This patch updates the existing is_ppc_secureboot_enabled() and is_ppc_trustedboot_enabled() functions to add support for pseries. For pseries the secureboot and trustedboot state are exposed via device-tree properties /ibm,secure-boot and /ibm,trusted-boot. The values of ibm,secure-boot under pseries are interpreted as: 0 - Disabled 1 - Enabled in Log-only mode. This patch interprets this value as disabled, since audit mode is currently not supported for Linux. 2 - Enabled and enforced. 3-9 - Enabled and enforcing; requirements are at the discretion of the operating system. The values of ibm,trusted-boot under pseries are interpreted as: 0 - Disabled 1 - Enabled Signed-off-by:Nayna Jain <nayna@linux.ibm.com> Reviewed-by:
Daniel Axtens <dja@axtens.net> Reviewed-by:
Mimi Zohar <zohar@linux.ibm.com> [mpe: Drop machdep.h inclusion, tweak change log slightly] Signed-off-by:
-
Milton Miller authored
The code in vdso_cpu_init that exposes the cpu and numa node to userspace via SPRG_VDSO incorrctly masks the cpu to 12 bits. This means that any kernel running on a box with more than 4096 threads (NR_CPUS advertises a limit of of 8192 cpus) would expose userspace to two cpu contexts running at the same time with the same cpu number. Note: I'm not aware of any distro shipping a kernel with support for more than 4096 threads today, nor of any system image that currently exceeds 4096 threads. Found via code browsing. Fixes: 18ad51dd ("powerpc: Add VDSO version of getcpu") Signed-off-by:
Milton Miller <miltonm@us.ibm.com> Signed-off-by:
Anton Blanchard <anton@linux.ibm.com> Signed-off-by:
-
Anju T Sudhakar authored
IMC trace-mode record has MSR[HV PR] bits added in the third DW. These bits can be used to set the cpumode for the instruction pointer captured in each sample. Add support in kernel to use these bits to set the cpumode for each sample. Signed-off-by:
Anju T Sudhakar <anju@linux.vnet.ibm.com> Signed-off-by:
Madhavan Srinivasan <maddy@linux.ibm.com> Signed-off-by:
-
Alexander A. Klimov authored
Rationale: Reduces attack surface on kernel devs opening the links for MITM as HTTPS traffic is much harder to manipulate. Deterministic algorithm: For each file: If not .svg: For each line: If doesn't contain `\bxmlns\b`: For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`: If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`: If both the HTTP and HTTPS versions return 200 OK and serve the same content: Replace HTTP with HTTPS. Signed-off-by:Alexander A. Klimov <grandmaster@al2klimov.de> Signed-off-by:
-
Alexander A. Klimov authored
Rationale: Reduces attack surface on kernel devs opening the links for MITM as HTTPS traffic is much harder to manipulate. Deterministic algorithm: For each file: If not .svg: For each line: If doesn't contain `\bxmlns\b`: For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`: If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`: If both the HTTP and HTTPS versions return 200 OK and serve the same content: Replace HTTP with HTTPS. Signed-off-by:Andrew Donnellan <ajd@linux.ibm.com> Signed-off-by:
-
Wei Yongjun authored
The sparse tool complains as follows: drivers/cpuidle/cpuidle-pseries.c:25:23: warning: symbol 'pseries_idle_driver' was not declared. Should it be static? 'pseries_idle_driver' is not used outside of this file, so marks it static. Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by:
-
Anton Blanchard authored
Booting with a 4GB LMB size causes us to panic: qemu-system-ppc64: OS terminated: OS panic: Memory block size not suitable: 0x0 Fix pseries_memory_block_size() to handle 64 bit LMBs. Cc: stable@vger.kernel.org Signed-off-by:Anton Blanchard <anton@ozlabs.org> Signed-off-by:
-
YueHaibing authored
commit e27e0a94 ("powerpc/xive: Remove xive_kexec_teardown_cpu()") left behind this, remove it. Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Reviewed-by:
Greg Kurz <groug@kaod.org> Signed-off-by:
-
Sourabh Jain authored
When we enter into fadump crash path via system reset we fail to update the pstore. On the system reset path we first update the pstore then we go for fadump crash. But the problem here is when all the CPUs try to get the pstore lock to initiate the pstore write, only one CPUs will acquire the lock and proceed with the pstore write. Since it in NMI context CPUs that fail to get lock do not wait for their turn to write to the pstore and simply proceed with the next operation which is fadump crash. One of the CPU who proceeded with fadump crash path triggers the crash and does not wait for the CPU who gets the pstore lock to complete the pstore update. Timeline diagram to depicts the sequence of events that leads to an unsuccessful pstore update when we hit fadump crash path via system reset. 1 2 3 ... n CPU Threads | | | | | | | | Reached to -->|--->|---->| ----------->| system reset | | | | path | | | | | | | | Try to -->|--->|---->|------------>| acquire the | | | | pstore lock | | | | | | | | | | | | Got the -->| +->| | |<-+ pstore lock | | | | | |--> Didn't get the | --------------------------+ lock and moving | | | | ahead on fadump | | | | crash path | | | | Begins the -->| | | | process to | | | |<-- Got the chance to update the | | | | trigger the crash pstore | -> | | ... <- | | | | | | | | | | | | |<-- Triggers the | | | | | | crash | | | | | | ^ | | | | | | | Writing to -->| | | | | | | pstore | | | | | | | | | | ^ |__________________| | | CPU Relax | | | +-----------------------------------------+ | v Race: crash triggered before pstore update completes To avoid this race condition a barrier is added on crash_fadump path, it prevents the CPU to trigger the crash until all the online CPUs completes their task. A barrier is added to make sure all the secondary CPUs hit the crash_fadump function before we initiates the crash. A timeout is kept to ensure the primary CPU (one who initiates the crash) do not wait for secondary CPUs indefinitely. Signed-off-by:Sourabh Jain <sourabhjain@linux.ibm.com> Signed-off-by:
-
Anton Blanchard authored
Generic code has a wrapper to implement cputime_to_nsecs() on top of cputime_to_usecs() but we can easily return the full nanosecond resolution directly. Signed-off-by:
-
Balamuruhan S authored
Lots of PPC_INST_* macros are used only ever in PPC_* macros, fold those PPC_INST_* into PPC_RAW_* to avoid using PPC_INST_* accidentally. Signed-off-by:
Balamuruhan S <bala24@linux.ibm.com> Tested-by:
Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Acked-by:
-
Balamuruhan S authored
Wrap existing stringify macros to reuse raw instruction encoding macros that are newly added. Signed-off-by:
-
Balamuruhan S authored
Move macro definitions of powerpc instructions from bpf_jit.h to ppc-opcode.h and adopt the users of the macros accordingly. `PPC_MR()` is defined twice in bpf_jit.h, remove the duplicate one. Signed-off-by:
Sandipan Das <sandipan@linux.ibm.com> Signed-off-by:
-
Balamuruhan S authored
Remove duplicate macro definitions from bpf_jit.h and reuse the macros from ppc-opcode.h Signed-off-by:
-
Balamuruhan S authored
Few ppc instructions are encoded in test_emulate_step.c, consolidate them and use it from ppc-opcode.h Signed-off-by:
-
Balamuruhan S authored
Introduce PPC_RAW_* macros to have all the bare encoding of ppc instructions. Move `VSX_XX*()` and `TMRN()` macros up to reuse it. Signed-off-by:
-
Kajol Jain authored
Patch here adds a cpumask attr to hv_24x7 pmu along with ABI documentation. Primary use to expose the cpumask is for the perf tool which has the capability to parse the driver sysfs folder and understand the cpumask file. Having cpumask file will reduce the number of perf command line parameters (will avoid "-C" option in the perf tool command line). It can also notify the user which is the current cpu used to retrieve the counter data. command:# cat /sys/devices/hv_24x7/interface/cpumask 0 Signed-off-by:
Kajol Jain <kjain@linux.ibm.com> Reviewed-by:
-
Kajol Jain authored
Patch here adds cpu hotplug functions to hv_24x7 pmu. A new cpuhp_state "CPUHP_AP_PERF_POWERPC_HV_24x7_ONLINE" enum is added. The online callback function updates the cpumask only if its empty. As the primary intention of adding hotplug support is to designate a CPU to make HCALL to collect the counter data. The offline function test and clear corresponding cpu in a cpumask and update cpumask to any other active cpu. Signed-off-by:
Gautham R. Shenoy <ego@linux.vnet.ibm.com> Signed-off-by:
-
Nathan Lynch authored
pseries_update_drconf_memory() runs from a DT notifier in response to an update to the ibm,dynamic-memory property of the /ibm,dynamic-reconfiguration-memory node. This property is an older less compact format than the ibm,dynamic-memory-v2 property used in most currently supported firmwares. There has never been an equivalent function for the v2 property. pseries_update_drconf_memory() compares the 'assigned' flag for each LMB in the old vs new properties and adds or removes the block accordingly. However it appears to be of no actual utility: * Partition suspension and PRRNs are specified only to change LMBs' NUMA affinity information. This notifier should be a no-op for those scenarios since the assigned flags should not change. * The memory hotplug/DLPAR path has a hack which short-circuits execution of the notifier: dlpar_memory() ... rtas_hp_event = true; drmem_update_dt() of_update_property() pseries_memory_notifier() pseries_update_drconf_memory() if (rtas_hp_event) return; So this code only makes sense as a relic of the time when more of the DLPAR workflow took place in user space. I don't see a purpose for it now. Signed-off-by:Nathan Lynch <nathanl@linux.ibm.com> Signed-off-by:
-
Nathan Lynch authored
dlpar_cpu_readd() is unused now. Signed-off-by:
-
Nathan Lynch authored
dlpar_memory() no longer has any callers which pass PSERIES_HP_ELOG_ACTION_READD. Remove this case and the corresponding unreachable code. Signed-off-by:
-
Nathan Lynch authored
pseries_devicetree_update() is no longer called with PRRN_SCOPE. The purpose of prrn_update_node() was to remove and then add back a LMB whose NUMA assignment had changed. This has never been reliable, and this codepath has been default-disabled for several releases. Remove prrn_update_node(). Signed-off-by:
-
Nathan Lynch authored
Since arch_update_cpu_topology() doesn't do anything on powerpc now, remove it and associated dead code. Signed-off-by:
Srikar Dronamraju <srikar@linux.vnet.ibm.com> Signed-off-by:
-
Nathan Lynch authored
All users of this prrn_is_enabled() are gone; remove it. Signed-off-by:
-
