- 28 Jun, 2018 5 commits
-
-
Thomas Zimmermann authored
This patch unifies the naming of DRM functions for reference counting of struct drm_device. The resulting code is more aligned with the rest of the Linux kernel interfaces. Signed-off-by:
Thomas Zimmermann <tdz@users.sourceforge.net> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20180618110154.30462-6-tdz@users.sourceforge.net
-
Thomas Zimmermann authored
This patch unifies the naming of DRM functions for reference counting of struct drm_gem_object. The resulting code is more aligned with the rest of the Linux kernel interfaces. Signed-off-by:
-
Thomas Zimmermann authored
This patch unifies the naming of DRM functions for reference counting of struct drm_gem_object. The resulting code is more aligned with the rest of the Linux kernel interfaces. Signed-off-by:
-
Thomas Zimmermann authored
This patch unifies the naming of DRM functions for reference counting of struct drm_gem_object. The resulting code is more aligned with the rest of the Linux kernel interfaces. Signed-off-by:
-
Thomas Zimmermann authored
This patch unifies the naming of DRM functions for reference counting of struct drm_connector. The resulting code is more aligned with the rest of the Linux kernel interfaces. Signed-off-by:
-
- 27 Jun, 2018 8 commits
-
-
Anusha Srivatsa authored
This patch addresses Interrupts from south display engine (SDE). ICP has two registers - SHOTPLUG_CTL_DDI and SHOTPLUG_CTL_TC. Introduce these registers and their intended values. Introduce icp_irq_handler(). The icp_irq_postinstall() takes care of enabling all PCH interrupt sources, to unmask them as needed with SDEIMR, as is done done by ibx_irq_pre_postinstall() for earlier platforms. We do not need to explicitly call the ibx_irq_pre_postinstall(). Also, while changing these, s/CPT/PPT/CPT-CNP comment. v2: - remove redundant register defines.(Lucas) - Change register names to be more consistent with previous platforms (Lucas) v3: -Reorder bit defines to a more appropriate location. Change the comments. Confirm in the commit message that icp_irq_postinstall() need not go to ibx_irq_pre_postinstall() and ibx_irq_postinstall() as in earlier platforms. (Paulo) Cc: Lucas De Marchi <lucas.de.marchi@gmail.com> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Cc: Ville Syrjala <ville.syrjala@linux.intel.com> Reviewed-by:
Lucas De Marchi <lucas.demarchi@intel.com> Reviewed-by:
Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by:
Anusha Srivatsa <anusha.srivatsa@intel.com> [Paulo: coding style bikesheds and rebases]. Signed-off-by:
-
Chris Wilson authored
In the next^W forthcoming patch, we will start to defer retiring the request from the engine list if it is still active on the submission backend. To preserve the semantics that after wait-for-idle completes the system is idle and fully retired, we need to therefore wait for the backends to idle before calling i915_retire_requests(). Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180627115334.16282-1-chris@chris-wilson.co.uk
-
Imre Deak authored
Add the definition for ICL power wells and their mapping to power domains. On ICL there are 3 power well control registers, we'll select the correct one based on higher bits of the power well ID. The offset for the control and status flags within this register is based on the lower bits of the ID as on older platforms. As the DC state programming is also the same as on old platforms we can reuse the corresponding helpers. For this we mark here the DC-off power well as shared among multiple platforms. Other than the above the delta between old platforms and ICL: - Pipe C has its own power well, so we can save some additional power in the pipe A+B and (non-eDP) pipe A configurations. - Power wells for port E/F DDI/AUX IO and Thunderbolt 1-4 AUX IO v2: - Rebase on drm-tip after prep patch for this was merged there as requested by Paulo. - Actually add the new AUX and DDI power well control regs (Rakshmi) v3: - Fix power well register names in code comments - Add TBT AUX->power well 3 dependency v4: - Rebase v5: - Detach AUX power wells from the INIT power domain. These power wells can only be enabled in a TC/TBT connected state and otherwise not needed during driver initialization. v6: - Use _MMIO_PORT(...) instead _MMIO(_PICK(...)) (Paulo) Fix checkpatch warnings. Cc: Animesh Manna <animesh.manna@intel.com> Cc: Rakshmi Bhatia <rakshmi.bhatia@intel.com> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by:
Imre Deak <imre.deak@intel.com> Reviewed-by: Animesh Manna <animesh.manna@intel.com> (v1) Reviewed-by:
-
José Roberto de Souza authored
Sink can be configured to calculate the CRC over the static frame and compare with the CRC calculated and transmited in the VSC SDP by source, if there is a mismatch sink will do a short pulse in HPD and set DP_PSR_LINK_CRC_ERROR in DP_PSR_ERROR_STATUS. Spec: 7723 v6: andling DP_PSR_LINK_CRC_ERROR here and remove "bdw+" from commit message v4: patch moved to after 'drm/i915/psr: Avoid PSR exit max time timeout' to avoid touch in 2 patches EDP_PSR_DEBUG. v3: disabling PSR instead of exiting on error Reviewed-by:
Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by:
José Roberto de Souza <jose.souza@intel.com> Signed-off-by:
-
José Roberto de Souza authored
Specification requires that max time should be masked from bdw and forward but it can be also safely enabled to hsw. This will make PSR exits more deterministic and only when really needed. If this was used to fix a issue in some panel than can only self-refresh for a few seconds, that panel will interrupt and assert one of the PSR errors handled in: 'drm/i915/psr: Handle PSR RFB storage error' and 'drm/i915/psr: Begin to handle PSR/PSR2 errors set by sink' Spec: 21664 v4: patch moved to before 'drm/i915/psr/bdw+: Enable CRC check in the static frame on the sink side' to avoid touch in 2 patches EDP_PSR_DEBUG. Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by:
-
José Roberto de Souza authored
Sink will interrupt source when it have any PSR error. DP_PSR_VSC_SDP_UNCORRECTABLE_ERROR is a PSR2 but already handling it here. The only missing error to be handled is DP_PSR_LINK_CRC_ERROR that will be taken in care in a futher patch. v6: not handling DP_PSR_LINK_CRC_ERROR here v5: handling all PSR errors here, so the commit message and comment have changed v3: disabling PSR instead of exiting on error Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by:
-
José Roberto de Souza authored
eDP spec states that sink device will do a short pulse in HPD line when there is a PSR/PSR2 error that needs to be handled by source, this is handling the first and most simples error: DP_PSR_SINK_INTERNAL_ERROR. Here taking the safest approach and disabling PSR(at least until the next modeset), to avoid multiple rendering issues due to bad pannels. v5: added lockdep_assert in psr_disable and renamed psr_disable() to intel_psr_disable_locked() v4: Using CAN_PSR instead of HAS_PSR in intel_psr_short_pulse v3: disabling PSR instead of exiting on error Reviewed-by:
-
José Roberto de Souza authored
It was only used in VLV/CHV so after the removal of the PSR support for those platforms it is not necessary any more. v7: Rebased Reviewed-by:
-
- 26 Jun, 2018 4 commits
-
-
Dhinakaran Pandiyan authored
Depending whether PSR1 or PSR2 was configured, we print a warning if the corresponding control mmio indicated PSR was erroneously enabled. As Chris pointed out, it makes more sense to check for both the mmio's since we expect neither PSR1 nor PSR2 to be enabled when psr_activate() is called. v2: Read PSR2 control register only on supported platforms (Rodrigo) Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180626090522.17682-1-dhinakaran.pandiyan@intel.com
-
Dhinakaran Pandiyan authored
Commit 5422b37c ("drm/i915/psr: Kill delays when activating psr back.") switched from delayed work to the plain variant and while doing so removed the check for work_busy() before scheduling a PSR activation. This appears to cause consecutive executions of psr_activate() in this scenario - after a worker picks up the PSR work item for execution and before the work function can acquire the PSR mutex, a psr_flush() can get hold of the mutex and schedule another PSR work. Without a psr_exit() between the two psr_activate() calls, warning messages get printed. Further, since we drop the mutex in the midst of psr_work() to wait for PSR to idle, another work item can also get scheduled. Fix this by returning if PSR was already active. Fixes: 5422b37c ("drm/i915/psr: Kill delays when activating psr back.") Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=106948 Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: José Roberto de Souza <jose.souza@intel.com> Signed-off-by:
-
Rodrigo Vivi authored
At some point we introduced the function pointers on PSR code to help with VLV/CHV separation logic because it had a different HW implementation from PSR. Since all converged to HSW PSR and we dropped the VLV/CHV support, let's also kill the useless function pointers and leave the code cleaner. Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Signed-off-by:
-
Imre Deak authored
So far we got an AUX power domain reference only for the duration of DP AUX transfers. However, the following suggests that we also need these for main link functionality: - The specification doesn't state whether it's needed or not for main link functionality, but suggests that these power wells need to be enabled already during display core initialization (Sequences to Initialize Display). - For PSR we need to keep the AUX power well enabled. - On ICL combo PHY ports (non-TC) the AUX power well is needed for link training too: while the port is enabled with a DP link training test pattern trying to toggle the AUX power well will time out. - On ICL MG PHY ports (TC) the AUX power well is needed also for main link functionality (both in DP and HDMI modes). - Windows enables these power wells both for main and AUX lane functionality. Based on the above take an AUX power reference for main link functionality too. This makes a difference only on GEN10+ (GLK+) platforms, where we have separate port specific AUX power wells. For PSR we still need to distinguish between port A and the other ports, since on port A DC states must stay enabled for main link functionality, but DC states must be disabled for driver initiated AUX transfers. So re-use the corresponding helper from intel_psr.c. Since we take now a reference for main link functionality on all DP ports we can forgo taking the separate power ref for PSR functionality. v2: - Make sure DC states stay enabled when taking the ref on port A. (Ville) v3: (Ville) - Fix comment about logic for encoders without a crtc state and add FIXME note for a simplification to avoid calling get_power_domains in such cases. - Use intel_crtc_has_dp_encoder() instead !intel_crtc_has_type(HDMI). Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by:
-
- 25 Jun, 2018 3 commits
-
-
Chris Wilson authored
Due to how we only release the pining on the context state on retirement and never track activity on the context vma itself, the object can never be active at the point of release. Replace the conditional transfer of ownership onto an active-reference with an assert that the object is idle. Signed-off-by:
-
Chris Wilson authored
As we may cancel the ce->state allocation during context pinning (but crucially after we mark ce as operational), that means we may be asked to destroy a nonexistent ce->state. Given the choice in handing a complex error path on pinning, and just ignoring the lack of state in destroy, choice the latter for simplicity. Reported-by:
Zhao Yakui <yakui.zhao@intel.com> Signed-off-by:
-
Chris Wilson authored
If we avoid cleaning up the old state immediately in intel_atomic_commit_tail() and defer it to a second task, we can avoid taking heavily contended locks when the caller is ready to procede. Subsequent modesets will wait for the cleanup operation (either directly via the ordered modeset wq or indirectly through the atomic helperr) which keeps the number of inflight cleanup tasks in check. As an example, during reset an immediate modeset is performed to disable the displays before the HW is reset, which must avoid struct_mutex to avoid recursion. Moving the cleanup to a separate task, defers acquiring the struct_mutex to after the GPU is running again, allowing it to complete. Even in a few patches time (optimist!) when we no longer require struct_mutex to unpin the framebuffers, it will still be good practice to minimise the number of contention points along reset. The mutex dependency still exists (as one modeset flushes the other), but in the short term it resolves the deadlock for simple reset cases. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101600Signed-off-by:
Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Acked-by:
-
- 22 Jun, 2018 1 commit
-
-
Anusha Srivatsa authored
In the guc_ctl_debug_flags, the ads struct is programmed only when USES_GUC_SUBMISSION is satisfied. But, this has to be programmed for all suspend/resume cases. Remove the condition and program the ads struct for both huc loading and guc submission. This issue was noticed when CI threw errors for enable_guc=2 (load huc; disable submission) v2: - Change commit title. - Correct the shifts. (Daniele) Credits to: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: John Spotswood <john.a.spotswood@intel.com> Cc: Oscar Mateo <oscar.mateo@intel.com> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Signed-off-by:
Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Reviewed-by:
John Spotswood <john.a.spotswood@intel.com> Signed-off-by:
-
- 21 Jun, 2018 6 commits
-
-
Vandita Kulkarni authored
Alpha blending with alpha 0 and 0xff passes through alpha math and rounding logic causing differences compared to fully transparent or opaque plane,resulting in CRC mismatch. This WA on icl and above enables hardware to bypass alpha math and rounding for per pixel alpha values of 00 and 0xff v2: Fix patchwork checkpatch warnings. Signed-off-by:
Vandita Kulkarni <vandita.kulkarni@intel.com> Reviewed-by:
-
Imre Deak authored
Some MG PLL registers have fields that need to be preserved at their HW default or BIOS programmed values. So make sure we preserve them. v2: - Add comment to icl_mg_pll_write() explaining the need for register masks. (Vandita) - Fix patchwork checkpatch warning. v3: - Rebase on drm-tip. Cc: Vandita Kulkarni <vandita.kulkarni@intel.com> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Cc: James Ausmus <james.ausmus@intel.com> Signed-off-by:
-
Imre Deak authored
Atm we're zeroing out fields in MG_PLL_BIAS and MG_PLL_TDC_COLDST_BIAS if refclk is 38.4MHz, whereas the spec tells us to preserve them. Although the calculated values mostly match the register defaults even for the 38.4MHz case, there are some differences wrt. what BIOS programs (I noticed at least differences in the MG_PLL_BIAS/IREFTRIM and MG_PLL_BIAS/BIASCAL_EN fields). In the lack of further info on how to program these fields, just do what the spec says and preserve the BIOS state. v2: - Preserve the BIOS programmed reg fields instead of programming them. Cc: Vandita Kulkarni <vandita.kulkarni@intel.com> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Cc: James Ausmus <james.ausmus@intel.com> Signed-off-by:
-
Lucas De Marchi authored
This became dead code with commit 309bd8ed ("drm/i915: Reinstate GMBUS and AUX interrupts on gen4/g4x"). v2: Move comment about HW behavior to where decision is made to enable MSI (Ville). Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180523180435.18042-1-lucas.demarchi@intel.com
-
Chris Wilson authored
To aide debugging spurious EINVALs, include a debug message every time we emit one from execbuf. References: https://bugs.freedesktop.org/show_bug.cgi?id=106744Signed-off-by:
Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180621080150.8110-1-chris@chris-wilson.co.uk
-
Chris Wilson authored
We only need to apply the BIAS for self-relocations into the batchbuffer iff the execobject has any relocations. This suppresses some warnings we may get with a full gtt (so the batch object has wound up at 0 from a previous invocation), but doesn't fix the underlying problem of how we tried to move a pinned batch vma (how we have a pinned user vma outside of execbuf, I do not know, though this being on an aliasing ppgtt means it could be a spurious pinning via the global gtt). One step at a time... References: https://bugs.freedesktop.org/show_bug.cgi?id=106744#c1 Testcase: igt/gem_exec_gttfill # byt (sporadic) Signed-off-by:
-
- 20 Jun, 2018 6 commits
-
-
Chris Wilson authored
The guc submission backends expects to only be run from (at least) softirq context, but during our intel_engine_is_idle() check we would call into the tasklet to make sure it was flushed. As this could occur from process context, occasionally we would be caught out using a wait_for_atomic() not from an atomic context: [ 59.939091] WARN_ON_ONCE((1) && !(preempt_count() != 0)) [ 59.939142] WARNING: CPU: 1 PID: 2901 at drivers/gpu/drm/i915/intel_guc_submission.c:615 guc_submission_tasklet+0x784/0xa90 [i915] [ 59.939143] Modules linked in: vgem snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic i915 x86_pkg_temp_thermal intel_powerclamp coretemp crct10dif_pclmul snd_hda_intel crc32_pclmul snd_hda_codec ghash_clmulni_intel snd_hwdep snd_hda_core e1000e snd_pcm mei_me mei prime_numbers [ 59.939164] CPU: 1 PID: 2901 Comm: gem_exec_schedu Tainted: G U W 4.18.0-rc1-g93475d62c730-drmtip_67+ #1 [ 59.939165] Hardware name: System manufacturer System Product Name/Z170M-PLUS, BIOS 3610 03/29/2018 [ 59.939188] RIP: 0010:guc_submission_tasklet+0x784/0xa90 [i915] [ 59.939189] Code: fc ff ff 80 3d 2f 87 11 00 00 0f 85 80 fb ff ff 48 c7 c6 f8 49 40 c0 48 c7 c7 80 41 3e c0 c6 05 14 87 11 00 01 e8 2c ea d6 d3 <0f> 0b e9 5f fb ff ff 8b 46 38 89 cf 31 c7 83 e7 c0 75 08 39 c1 0f [ 59.939253] RSP: 0018:ffffaafe08a03c10 EFLAGS: 00010286 [ 59.939255] RAX: 0000000000000000 RBX: ffff8f9112c246f0 RCX: 0000000000000001 [ 59.939256] RDX: 0000000080000001 RSI: ffffffff95086d8e RDI: 00000000ffffffff [ 59.939257] RBP: ffff8f9112c24680 R08: 000000009517be77 R09: 0000000000000000 [ 59.939258] R10: 0000000000000000 R11: 0000000000000000 R12: ffff8f9112c24700 [ 59.939259] R13: ffff8f9112c24700 R14: 0000000000000000 R15: ffff8f9112c242a8 [ 59.939260] FS: 00007fc2cc7e5980(0000) GS:ffff8f9136c40000(0000) knlGS:0000000000000000 [ 59.939261] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 59.939262] CR2: 00007fc2cc815040 CR3: 000000021f10e003 CR4: 00000000003606e0 [ 59.939263] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 59.939264] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 59.939265] Call Trace: [ 59.939288] ? intel_engine_is_idle+0x64/0x160 [i915] [ 59.939323] ? intel_engine_dump+0x638/0x890 [i915] [ 59.939327] ? seq_printf+0x49/0x70 [ 59.939353] ? i915_engine_info+0xc8/0x100 [i915] [ 59.939356] ? drm_get_color_range_name+0x20/0x20 [ 59.939361] ? seq_read+0xf1/0x470 [ 59.939365] ? trace_hardirqs_on_caller+0xe0/0x1b0 [ 59.939370] ? full_proxy_read+0x51/0x80 [ 59.939389] ? __vfs_read+0x31/0x170 [ 59.939395] ? do_sys_open+0x13b/0x240 [ 59.939398] ? rcu_read_lock_sched_held+0x6f/0x80 [ 59.939401] ? vfs_read+0x9e/0x140 [ 59.939404] ? ksys_read+0x50/0xc0 [ 59.939409] ? do_syscall_64+0x55/0x190 [ 59.939412] ? entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 59.939420] irq event stamp: 552834 [ 59.939422] hardirqs last enabled at (552833): [<ffffffff940fc74c>] console_unlock+0x3fc/0x600 [ 59.939425] hardirqs last disabled at (552834): [<ffffffff94a0111c>] error_entry+0x7c/0x100 [ 59.939451] softirqs last enabled at (552614): [<ffffffffc02e0f53>] i915_request_add+0x2e3/0x7b0 [i915] [ 59.939470] softirqs last disabled at (552604): [<ffffffffc02e0ecb>] i915_request_add+0x25b/0x7b0 [i915] Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=106977 Fixes: dd0cf235 ("drm/i915: Speed up idle detection by kicking the tasklets") Signed-off-by:
Michel Thierry <michel.thierry@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180620135929.23956-1-chris@chris-wilson.co.uk
-
Rodrigo Vivi authored
Signed-off-by: -
Radhakrishna Sripada authored
Starting Icelake silicon supports 10-bpc hdmi to support certain media workloads. Currently hdmi supports 8 and 12 bpc. Plumbed in support for 10 bit hdmi. Cc: James Ausmus <james.ausmus@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Cc: Manasi Navare <manasi.d.navare@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
Radhakrishna Sripada <radhakrishna.sripada@intel.com> Signed-off-by:
-
Colin Ian King authored
Currently for the psr_table->tp2_tp3_wakeup_time case 3 there appears to be a copy-paste error from the previous switch statement where dev_priv->vbt.psr.tp1_wakeup_time_us is being assigned and I believe it should be dev_priv->vbt.psr.tp2_tp3_wakeup_time_us that should be assigned instead. Detected by CoverityScan, CID#1470105 ("Copy-paste error") Fixes: 77312ae8 ("drm/i915/psr: vbt change for psr") Signed-off-by:Colin Ian King <colin.king@canonical.com> Reviewed-by:
-
Dhinakaran Pandiyan authored
commit 5422b37c ("drm/i915/psr: Kill delays when activating psr back.") removed the call to cancel a scheduled psr_work from psr_disable() and instead added an early return in the work function. But, if the scheduled work item is executed after psr_enable(), we end up printing warnings as PSR is already enabled and active. So, put the cancel_work call back in psr_disable(). Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: José Roberto de Souza <jose.souza@intel.com> Fixes: 5422b37c ("drm/i915/psr: Kill delays when activating psr back.") Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=106948Signed-off-by:
Dhinakaran Pandiyan <dhinakaran.pandiyan@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180618220207.2778-1-dhinakaran.pandiyan@intel.com
-
Chris Wilson authored
Along the early error path for igt_switch_to_kernel_context we may try to dereference an invalid error pointer. Instead, return early rather than dump the GEM trace since we haven't yet emitted anything of interest. Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Fixes: 09a4c02e ("drm/i915: Look for an active kernel context before switching") Signed-off-by:
-
- 19 Jun, 2018 7 commits
-
-
https://github.com/intel/gvt-linuxRodrigo Vivi authored
gvt-next-2018-06-19 - fine-grained per vgpu locking (Colin) - fine-grained vgpu scheduler locking (Colin) - deliver windows guest cursor hotspot info (Tina) - GVT-g BXT support (Colin) - other misc and checker fixes (Chris, Xinyun) Signed-off-by:
-
Jani Nikula authored
The hooks aren't supposed to modify the ELD, so use const pointer. As a drive-by fix, use drm_eld_size() to log ELD size. Suggested-by:
Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180619124437.10982-1-jani.nikula@intel.com
-
Ville Syrjälä authored
The PCH transcoder registers are only 12 bits wide for the hdisplay and hblank_start values. On HSW/BDW the CPU side registers are 13 bits wide. intel_mode_valid() only checks against the higher limit (since we don't know where the mode is to be used), so an extra check is required against the FDI limits. Signed-off-by:
-
Ville Syrjälä authored
Validate that all display timings fit within the number of bits we have in the transcoder timing registers. The limits are: hsw+: 4k: vdisplay, vblank_start 8k: everything else gen3+: 4k: h/vdisplay, h/vblank_start 8k: everything else gen2: 2k: h/vdisplay, h/vblank_start 4k: everything else Also document the fact that the mode_config.max_width/height limits refer to just the max framebuffer dimensions we support. Which may be larger than the max hdisplay/vdisplay. Signed-off-by:
-
Ville Syrjälä authored
No point in having this extra indireciton for the cursor max size. So drop the defines and just write out the raw numbers. Makes it easier to see what's going on. Signed-off-by:
-
Ville Syrjälä authored
Use the '[PROP:id:name]' format I introduced for the core in the driver debug messages as well. Signed-off-by:
-
Vathsala Nagaraju authored
Adds new psrwake options defined in the below table. Platform PSR wake options vbt version KBL/CFL/WHL All(205+) BXT Uses old interpretation. CNL/ICL+ All(205+) GLK All(205+) SKL All PV releases (Check for 205+ might help but cannot be foolproof) We will continue with newer interpretation for SKL from 205. v2: Jani Keep the bdb version check. v3: Apply newer version for skl from 205+(DK). Add (version check && platform list) (Jani). Add bdb version for each platform in commit message(DK). Cc: Jani Nikula <jani.nikula@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Puthikorn Voravootivat <puthik@chromium.org> Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Cc: Ashutosh D Shukla <ashutosh.d.shukla@intel.com> Cc: Maulik V Vaghela <maulik.v.vaghela@intel.com> Signed-off-by:Vathsala Nagaraju <vathsala.nagaraju@intel.com> Reviewed-by:
-
