Pull x86 microcode updates from Ingo Molnar:
 "The main changes are further simplification and unification of the
  code between the AMD and Intel microcode loaders, plus other
  simplifications - by Borislav Petkov"

* 'x86-microcode-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/microcode/AMD: Remove struct cont_desc.eq_id
  x86/microcode/AMD: Remove AP scanning optimization
  x86/microcode/AMD: Simplify saving from initrd
  x86/microcode/AMD: Unify load_ucode_amd_ap()
  x86/microcode/AMD: Check patch level only on the BSP
  x86/microcode: Remove local vendor variable
  x86/microcode/AMD: Use find_microcode_in_initrd()
  x86/microcode/AMD: Get rid of global this_equiv_id
  x86/microcode: Decrease CPUID use
  x86/microcode/AMD: Rework container parsing
  x86/microcode/AMD: Extend the container struct
  x86/microcode/AMD: Shorten function parameter's name
  x86/microcode/AMD: Clean up find_equiv_id()
  x86/microcode: Convert to bare minimum MSR accessors
  x86/MSR: Carve out bare minimum accessors

Pull x86 fpu updates from Ingo Molnar:
 "The main changes relate to fixes between (lack of) CPUID and FPU
  detection that should only affect old or weird CPUs, by Andy
  Lutomirski"

* 'x86-fpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/fpu: Fix the "Giving up, no FPU found" test
  x86/fpu: Fix CPUID-less FPU detection
  x86/fpu: Fix "x86/fpu: Legacy x87 FPU detected" message
  x86/cpu: Re-apply forced caps every time CPU caps are re-read
  x86/cpu: Factor out application of forced CPU caps
  x86/cpu: Add X86_FEATURE_CPUID
  x86/fpu/xstate: Move XSAVES state init to a function

Pull x86 cpufeature updates from Ingo Molnar:
 "The main changes in this cycle were related to enable ring-3
  MONITOR/MWAIT instructions support on supported CPUs, by Grzegorz
  Andrejczuk and Piotr Luc"

* 'x86-cpufeature-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/cpufeature: Move RING3MWAIT feature to avoid conflicts
  x86/cpufeature: Enable RING3MWAIT for Knights Mill
  x86/cpufeature: Enable RING3MWAIT for Knights Landing
  x86/cpufeature: Add RING3MWAIT to CPU features
  x86/elf: Add HWCAP2 to expose ring 3 MONITOR/MWAIT
  x86/msr: Add MSR_MISC_FEATURE_ENABLES and RING3MWAIT bit
  x86/cpufeature: Add AVX512_VPOPCNTDQ feature

Pull x86 cleanups from Ingo Molnar:
 "Two small cleanups"

* 'x86-cleanups-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/traps: Get rid of unnecessary preempt_disable/preempt_enable_no_resched
  x86/pci-calgary: Fix iommu_free() comparison of unsigned expression >= 0

Pull x86 boot updates from Ingo Molnar:
 "Misc updates:

   - fix e820 error handling

   - convert page table setup code from assembly to C

   - fix kexec environment bug

   - ... plus small cleanups"

* 'x86-boot-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/kconfig: Remove misleading note regarding hibernation and KASLR
  x86/boot: Fix KASLR and memmap= collision
  x86/e820/32: Fix e820_search_gap() error handling on x86-32
  x86/boot/32: Convert the 32-bit pgtable setup code from assembly to C
  x86/e820: Make e820_search_gap() static and remove unused variables

Pull x86 asm update from Ingo Molnar:
 "This adds a new SYSRET testcase"

* 'x86-asm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  selftests/x86: Add a selftest for SYSRET to noncanonical addresses

Pull x86 apic changes from Ingo Molnar:
 "The main changes in this cycle were:

   - Re-activate the hw IRQ resend mechanism that was downgraded to a
     sw-resend unintentionally. (Ruslan Ruslichenko)

   - Avoid sporadic spurious hrtimer interrupts (Frederic Weisbecker)"

[ Let's see if the io_apic retrigger ends up surviving this release, it
  got reverted last time because it found problems elsewhere  - Linus ]

* 'x86-apic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/apic: Fix a typo in a comment line
  x86/ioapic: Restore IO-APIC irq_chip retrigger callback
  x86/apic: Implement set_state_oneshot_stopped() callback
  x86/apic: Fix typos in comments

Pull locking updates from Ingo Molnar:
 "The main changes in this cycle were:

   - Implement wraparound-safe refcount_t and kref_t types based on
     generic atomic primitives (Peter Zijlstra)

   - Improve and fix the ww_mutex code (Nicolai Hähnle)

   - Add self-tests to the ww_mutex code (Chris Wilson)

   - Optimize percpu-rwsems with the 'rcuwait' mechanism (Davidlohr
     Bueso)

   - Micro-optimize the current-task logic all around the core kernel
     (Davidlohr Bueso)

   - Tidy up after recent optimizations: remove stale code and APIs,
     clean up the code (Waiman Long)

   - ... plus misc fixes, updates and cleanups"

* 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (50 commits)
  fork: Fix task_struct alignment
  locking/spinlock/debug: Remove spinlock lockup detection code
  lockdep: Fix incorrect condition to print bug msgs for MAX_LOCKDEP_CHAIN_HLOCKS
  lkdtm: Convert to refcount_t testing
  kref: Implement 'struct kref' using refcount_t
  refcount_t: Introduce a special purpose refcount type
  sched/wake_q: Clarify queue reinit comment
  sched/wait, rcuwait: Fix typo in comment
  locking/mutex: Fix lockdep_assert_held() fail
  locking/rtmutex: Flip unlikely() branch to likely() in __rt_mutex_slowlock()
  locking/rwsem: Reinit wake_q after use
  locking/rwsem: Remove unnecessary atomic_long_t casts
  jump_labels: Move header guard #endif down where it belongs
  locking/atomic, kref: Implement kref_put_lock()
  locking/ww_mutex: Turn off __must_check for now
  locking/atomic, kref: Avoid more abuse
  locking/atomic, kref: Use kref_get_unless_zero() more
  locking/atomic, kref: Kill kref_sub()
  locking/atomic, kref: Add kref_read()
  locking/atomic, kref: Add KREF_INIT()
  ...

Pull scheduler updates from Ingo Molnar:
 "The main changes in this (fairly busy) cycle were:

   - There was a class of scheduler bugs related to forgetting to update
     the rq-clock timestamp which can cause weird and hard to debug
     problems, so there's a new debug facility for this: which uncovered
     a whole lot of bugs which convinced us that we want to keep the
     debug facility.

     (Peter Zijlstra, Matt Fleming)

   - Various cputime related updates: eliminate cputime and use u64
     nanoseconds directly, simplify and improve the arch interfaces,
     implement delayed accounting more widely, etc. - (Frederic
     Weisbecker)

   - Move code around for better structure plus cleanups (Ingo Molnar)

   - Move IO schedule accounting deeper into the scheduler plus related
     changes to improve the situation (Tejun Heo)

   - ... plus a round of sched/rt and sched/deadline fixes, plus other
     fixes, updats and cleanups"

* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (85 commits)
  sched/core: Remove unlikely() annotation from sched_move_task()
  sched/autogroup: Rename auto_group.[ch] to autogroup.[ch]
  sched/topology: Split out scheduler topology code from core.c into topology.c
  sched/core: Remove unnecessary #include headers
  sched/rq_clock: Consolidate the ordering of the rq_clock methods
  delayacct: Include <uapi/linux/taskstats.h>
  sched/core: Clean up comments
  sched/rt: Show the 'sched_rr_timeslice' SCHED_RR timeslice tuning knob in milliseconds
  sched/clock: Add dummy clear_sched_clock_stable() stub function
  sched/cputime: Remove generic asm headers
  sched/cputime: Remove unused nsec_to_cputime()
  s390, sched/cputime: Remove unused cputime definitions
  powerpc, sched/cputime: Remove unused cputime definitions
  s390, sched/cputime: Make arch_cpu_idle_time() to return nsecs
  ia64, sched/cputime: Remove unused cputime definitions
  ia64: Convert vtime to use nsec units directly
  ia64, sched/cputime: Move the nsecs based cputime headers to the last arch using it
  sched/cputime: Remove jiffies based cputime
  sched/cputime, vtime: Return nsecs instead of cputime_t to account
  sched/cputime: Complete nsec conversion of tick based accounting
  ...

Pull RAS updates from Ingo Molnar:
 "The main changes in this cycle were:

  - Assign notifier chain priorities for all RAS related handlers to
    make the ordering explicit (Borislav Petkov)

  - Improve the AMD MCA banks sysfs output (Yazen Ghannam)

  - Various cleanups and restructuring of the x86 RAS code (Borislav
    Petkov)"

* 'ras-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/ras, EDAC, acpi: Assign MCE notifier handlers a priority
  x86/ras: Get rid of mce_process_work()
  EDAC/mce/amd: Dump TSC value
  EDAC/mce/amd: Unexport amd_decode_mce()
  x86/ras/amd/inj: Change dependency
  x86/ras: Flip the TSC-adding logic
  x86/ras/amd: Make sysfs names of banks more user-friendly
  x86/ras/therm_throt: Do not log a fake MCE for thermal events
  x86/ras/inject: Make it depend on X86_LOCAL_APIC=y

Pull perf updates from Ingo Molnar:
 "On the kernel side the main changes in this cycle were:

   - Add Intel Kaby Lake CPU support (Srinivas Pandruvada)

   - AMD uncore driver updates for fam17 (Janakarajan Natarajan)

   - Intel/PT updates and core events optimizations and cleanups
     (Alexander Shishkin)

   - cgroups events fixes (David Carrillo-Cisneros)

   - kprobes improvements (Masami Hiramatsu)

   - ... plus misc fixes and updates.

  On the tooling side the main changes were:

   - Support clang build in tools/{perf,lib/{bpf,traceevent,api}} with
     CC=clang, to, for instance, take advantage of better warnings
     (Arnaldo Carvalho de Melo):

   - Introduce the 'delta-abs' 'perf diff' compute method, that orders
     the histogram entries by the absolute value of the percentage delta
     for a function in two perf.data files, i.e. the functions that
     changed the most (increase or decrease in samples) comes first
     (Namhyung Kim)

   - Add support for parsing Intel uncore vendor event files and add
     uncore vendor events for the Intel server processors (Haswell,
     Broadwell, IvyBridge), Xeon Phi (Knights Landing) and Broadwell DE
     (Andi Kleen)

   - Introduce 'perf ftrace' a perf front end to the kernel's ftrace
     function and function_graph tracer, defaulting to the
     "function_graph" tracer, more work will be done in reviving this
     effort, forward porting it from its initial patch submission
     (Namhyung Kim)

   - Add 'e' and 'c' hotkeys to expand/collapse call chains for a single
     hist entry in the 'perf report' and 'perf top' TUI (Jiri Olsa)

   - Account thread wait time (off CPU time) separately: sleep, iowait
     and preempt, based on the prev_state of the last event, show the
     breakdown when using "perf sched timehist --state" (Namhyumg Kim)

   - Add more triggers to switch the output file (perf.data.TIMESTAMP).

     Now, in addition to switching to a different output file when
     receiving a SIGUSR2, one can also specify file size and time based
     triggers:

           perf record -a --switch-output=signal

     is equivalent to what we had before:

           perf record -a --switch-output

     While we can also ask for the file to be "sliced" by size, taking
     into account that that will happen only when we get woken up by the
     kernel, i.e. one has to take into account the --mmap-pages (the
     size of the perf mmap ring buffer):

           perf record -a --switch-output=2G

     will break the perf.data output into multiple files limited to 2GB
     of samples, right when generating the output.

     For time based samples, alert() will be used, so to have 1 minute
     limited perf.data output files:

          perf record -a --switch-output=1m

     (Jiri Olsa)

   - Improve 'perf trace' (Arnaldo Carvalho de Melo)

   - 'perf kallsyms' toy tool to look for extended symbol information on
     the running kernel and demonstrate the machine/thread/symbol APIs
     for use in other tools, such as 'perf probe' (Arnaldo Carvalho de
     Melo)

   - ... plus tons of other changes, see the shortlog and Git log for
     details"

* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (131 commits)
  perf tools: Add missing parse_events_error() prototype
  perf pmu: Fix check for unset alias->unit array
  perf tools: Be consistent on the type of map->symbols[] interator
  perf intel pt decoder: clang has no -Wno-override-init
  perf evsel: Do not put a variable sized type not at the end of a struct
  perf probe: Avoid accessing uninitialized 'map' variable
  perf tools: Do not put a variable sized type not at the end of a struct
  perf record: Do not put a variable sized type not at the end of a struct
  perf tests: Synthesize struct instead of using field after variable sized type
  perf bench numa: Make sure dprintf() is not defined
  Revert "perf bench futex: Sanitize numeric parameters"
  tools lib subcmd: Make it an error to pass a signed value to OPTION_UINTEGER
  tools: Set the maximum optimization level according to the compiler being used
  tools: Suppress request for warning options not existent in clang
  samples/bpf: Reset global variables
  samples/bpf: Ignore already processed ELF sections
  samples/bpf: Add missing header
  perf symbols: dso->name is an array, no need to check it against NULL
  perf tests record: No need to test an array against NULL
  perf symbols: No need to check if sym->name is NULL
  ...

Pull EFI updates from Ingo Molnar:
 "The main changes in this cycle were:

   - Changes to the EFI init code to establish whether secure boot
     authentication was performed at boot time. (Josh Boyer, David
     Howells)

   - Wire up the UEFI memory attributes table for x86. This eliminates
     any runtime memory regions that are both writable and executable,
     on recent firmware versions. (Sai Praneeth)

   - Move the BGRT init code to an earlier stage so that we can still
     use efi_mem_reserve(). (Dave Young)

   - Preserve debug symbols in the ARM/arm64 UEFI stub (Ard Biesheuvel)

   - Code deduplication work and various other cleanups (Lukas Wunner)

   - ... plus various other fixes and cleanups"

* 'efi-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  efi/libstub: Make file I/O chunking x86-specific
  efi: Print the secure boot status in x86 setup_arch()
  efi: Disable secure boot if shim is in insecure mode
  efi: Get and store the secure boot status
  efi: Add SHIM and image security database GUID definitions
  arm/efi: Allow invocation of arbitrary runtime services
  x86/efi: Allow invocation of arbitrary runtime services
  efi/libstub: Preserve .debug sections after absolute relocation check
  efi/x86: Add debug code to print cooked memmap
  efi/x86: Move the EFI BGRT init code to early init code
  efi: Use typed function pointers for the runtime services table
  efi/esrt: Fix typo in pr_err() message
  x86/efi: Add support for EFI_MEMORY_ATTRIBUTES_TABLE
  efi: Introduce the EFI_MEM_ATTR bit and set it from the memory attributes table
  efi: Make EFI_MEMORY_ATTRIBUTES_TABLE initialization common across all architectures
  x86/efi: Deduplicate efi_char16_printk()
  efi: Deduplicate efi_file_size() / _read() / _close()

Pull RCU updates from Ingo Molnar:
 "The RCU changes in this cycle are:

   - Dynticks updates, consolidating open-coded counter accesses into a
     well-defined API

   - SRCU updates: Simplify algorithm, add formal verification

   - Documentation updates

   - Miscellaneous fixes

   - Torture-test updates

  Most of the diffstat comes from the relatively large documentation
  update"

* 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (42 commits)
  srcu: Reduce probability of SRCU ->unlock_count[] counter overflow
  rcutorture: Add CBMC-based formal verification for SRCU
  srcu: Force full grace-period ordering
  srcu: Implement more-efficient reader counts
  rcu: Adjust FQS offline checks for exact online-CPU detection
  rcu: Check cond_resched_rcu_qs() state less often to reduce GP overhead
  rcu: Abstract extended quiescent state determination
  rcu: Abstract dynticks extended quiescent state enter/exit operations
  rcu: Add lockdep checks to synchronous expedited primitives
  rcu: Eliminate unused expedited_normal counter
  llist: Clarify comments about when locking is needed
  rcu: Fix comment in rcu_organize_nocb_kthreads()
  rcu: Enable RCU tracepoints by default to aid in debugging
  rcu: Make rcu_cpu_starting() use its "cpu" argument
  rcu: Add comment headers to expedited-grace-period counter functions
  rcu: Don't wake rcuc/X kthreads on NOCB CPUs
  rcu: Re-enable TASKS_RCU for User Mode Linux
  rcu: Once again use NMI-based stack traces in stall warnings
  rcu: Remove short-term CPU kicking
  rcu: Add long-term CPU kicking
  ...

Pull debugobjects updates from Ingo Molnar:
 "A number of scalability improvements by Waimang Long"

* 'core-debugobjects-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  debugobjects: Improve variable naming
  debugobjects: Reduce contention on the global pool_lock
  debugobjects: Scale thresholds with # of CPUs
  debugobjects: Track number of kmem_cache_alloc/kmem_cache_free done

Pull irq updates from Thomas Gleixner:
 "This update provides:

   - Yet another two irq controller chip drivers

   - A few updates and fixes for GICV3

   - A resource managed function for interrupt allocation

   - Fixes, updates and enhancements all over the place"

* 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  irqchip/qcom: Fix error handling
  genirq: Clarify logic calculating bogus irqreturn_t values
  genirq/msi: Add stubs for get_cached_msi_msg/pci_write_msi_msg
  genirq/devres: Use dev_name(dev) as default for devname
  genirq: Fix /proc/interrupts output alignment
  irqdesc: Add a resource managed version of irq_alloc_descs()
  irqchip/gic-v3-its: Zero command on allocation
  irqchip/gic-v3-its: Fix command buffer allocation
  irqchip/mips-gic: Fix local interrupts
  irqchip: Add a driver for Cortina Gemini
  irqchip: DT bindings for Cortina Gemini irqchip
  irqchip/gic-v3: Remove duplicate definition of GICD_TYPER_LPIS
  irqchip/gic-v3-its: Rename MAPVI to MAPTI
  irqchip/gic-v3-its: Drop deprecated GITS_BASER_TYPE_CPU
  irqchip/gic-v3-its: Refactor command encoding
  irqchip/gic-v3-its: Enable cacheable attribute Read-allocate hints
  irqchip/qcom: Add IRQ combiner driver
  ACPI: Add support for ResourceSource/IRQ domain mapping
  ACPI: Generic GSI: Do not attempt to map non-GSI IRQs during bus scan
  irq/platform-msi: Fix comment about maximal MSIs

Pull timer updates from Thomas Gleixner:
 "Nothing exciting, just the usual pile of fixes, updates and cleanups:

   - A bunch of clocksource driver updates

   - Removal of CONFIG_TIMER_STATS and the related /proc file

   - More posix timer slim down work

   - A scalability enhancement in the tick broadcast code

   - Math cleanups"

* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (23 commits)
  hrtimer: Catch invalid clockids again
  math64, tile: Fix build failure
  clocksource/drivers/arm_arch_timer:: Mark cyclecounter __ro_after_init
  timerfd: Protect the might cancel mechanism proper
  timer_list: Remove useless cast when printing
  time: Remove CONFIG_TIMER_STATS
  clocksource/drivers/arm_arch_timer: Work around Hisilicon erratum 161010101
  clocksource/drivers/arm_arch_timer: Introduce generic errata handling infrastructure
  clocksource/drivers/arm_arch_timer: Remove fsl-a008585 parameter
  clocksource/drivers/arm_arch_timer: Add dt binding for hisilicon-161010101 erratum
  clocksource/drivers/ostm: Add renesas-ostm timer driver
  clocksource/drivers/ostm: Document renesas-ostm timer DT bindings
  clocksource/drivers/tcb_clksrc: Use 32 bit tcb as sched_clock
  clocksource/drivers/gemini: Add driver for the Cortina Gemini
  clocksource: add DT bindings for Cortina Gemini
  clockevents: Add a clkevt-of mechanism like clksrc-of
  tick/broadcast: Reduce lock cacheline contention
  timers: Omit POSIX timer stuff from task_struct when disabled
  x86/timer: Make delay() work during early bootup
  delay: Add explanation of udelay() inaccuracy
  ...

Pull power supply and reset updates from Sebastian Reichel:
 "New drivers:
   - sbs-charger driver
   - max14656_charger_detector
   - axp20x_ac_power

  New chip/feature support"
   - axp20x_usb_power: add AXP223 support
   - tps65217: add usb charger support
   - qcom_smbb: support otg regulator
   - at91-reset: add samx7 support

  Dropped drivers:
   - intel_mid_battery (platform was dropped)

  Fixes:
   - at91-poweroff: avoid wearing off LPDDR memory
   - replace deprecated extcon API
   - lots of cleanup and style fixes
   - misc minor functionality fixes"

* tag 'for-v4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (84 commits)
  power: supply: add AC power supply driver for AXP20X and AXP22X PMICs
  dt-bindings: power: supply: add AXP20X/AXP22X AC power supply
  power: supply: axp20x_usb_power: use IIO channels when available
  power: supply: max14656: Export I2C and OF device ID as module aliases
  power: supply: bq2415x: check for NULL acpi_id to avoid null pointer dereference
  power: supply: bq24190_charger: Adjust formatting
  power: supply: bq24190_charger: Handle fault before status on interrupt
  power: supply: bq24190_charger: Don't read fault register outside irq_handle_thread()
  power: supply: bq24190_charger: Call power_supply_changed() for relevant component
  power: supply: bq24190_charger: Install irq_handler_thread() at end of probe()
  power: supply: bq24190_charger: Call set_mode_host() on pm_resume()
  power: supply: bq24190_charger: Fix irq trigger to IRQF_TRIGGER_FALLING
  power: supply: qcom_smbb: add regulator dependency
  power: reset: at91-reset: remove leftover platform_device_id
  power: reset: at91-reset: add samx7 support
  power: supply: max14656: fix platform_no_drv_owner.cocci warnings
  power: supply: pcf50633-charger: Compress return logic into one line.
  power: supply: ab8500_btemp: Compress return logic into one line.
  power: reset: at91-poweroff: timely shutdown LPDDR memories
  ARM: at91: define LPDDR types
  ...

Pull EDAC updates from Borislav Petkov:

 - Make amd64_edac still load on a machine with unpopulated nodes +
   cleanups (Yazen Ghannam)

 - Expose per-DIMM error counts in sysfs (Aaron Miller)

 - Add T2080 l2-cache support to mpc85xx (Chris Packham)

 - Random other small improvements/cleanups/fixlets

* tag 'edac_for_4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp:
  EDAC, mce_amd: Print IPID and Syndrome on a separate line
  EDAC, amd64: Bump driver version
  MAINTAINERS, EDAC: Update email for Thor Thayer
  EDAC, fsl_ddr: Make locally used symbols static
  EDAC, mpc85xx: Add T2080 l2-cache support
  EDAC, amd64: Add x86cpuid sanity check during init
  EDAC, amd64: Don't treat ECC disabled as failure
  EDAC: Add routine to check if MC devices list is empty
  EDAC, amd64: Remove unused printing macros
  EDAC, amd64: Rework messages in ecc_enabled()
  EDAC, amd64: Move global code out of instance functions
  EDAC, amd64: Free unused memory when init_one_instance() fails
  EDAC, mce_amd: Give more context to deferred error message
  EDAC, i7300: Test for the second channel properly
  EDAC, sb_edac: Get rid of ->show_interleave_mode()
  EDAC: Expose per-DIMM error counts in sysfs
  EDAC, amd64: Save and return err code from probe_one_instance()
  EDAC, i82975x: Add ioremap_nocache() error handling
  EDAC: Fix typos in enum mem_type comments
  EDAC: Make dev_attr_sdram_scrub_rate static

Merge tag 'hwmon-for-linus-v4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging

Pull hwmon updates from Guenter Roeck:

 - new driver for stts751

 - it87: Added support for IT8622E and IT8792E; improved support for
   other chips

 - lm70: Added support for TMP122/124

 - use permission-specific DEVICE_ATTR variants where possible

 - fixed overflows in various drivers

 - minor improvements in various drivers

* tag 'hwmon-for-linus-v4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (95 commits)
  hwmon: (sht15) Add device tree support
  devicetree: add lm90 thermal_zone sensor support
  hwmon: (it87) Add support for IT8792E
  hwmon: (it87) Do not overwrite bit 2..6 of pwm control registers
  hwmon: (it87) Fix pwm4 detection for IT8620 and IT8628
  hwmon: (it87) Ensure that pwm control cache is current before updating values
  hwmon: (it87) Improve IT8622 support
  hwmon: (it87) Add support for IT8622E
  hwmon: (it87) Add feature flag indicating that VIN3 is connected to 5V
  DT: add binding documentation for STTS751
  hwmon: new driver for ST stts751 thermal sensor
  hwmon: Register thermal zone only if 'dev' parameter was provided
  hwmon: Relax name attribute validation for new APIs
  hwmon: Update documentation to clarify rules for the 'name' attribute
  hwmon: Make name attribute mandatory for new APIs
  hwmon: (lm70) Add support for TI TMP122/124
  hwmon: (lm70) Utilize dev_warn instead of pr_warn
  hwmon: (ltc4151) Export OF device ID table as module aliases
  hwmon: (adc128d818) Preserve operation mode
  hwmon: (adc128d818) Support operation modes 1-3
  ...

Pull MTD updates from Brian Norris:
 "MTD updates for 4.11:

  General:
   - new kernel API for retrieving max bad blocks per die (not used yet)
   - track (and expose via sysfs) a partition's device tree node
   - support a "label" device tree property for naming an MTD

  NAND:
   - sunxi: avoid busy-waiting for NAND events
   - ifc: fix ECC handling on IFC v1.0
   - OX820: add explicit dependency on ARCH_OXNAS in Kconfig
   - core: add a new manufacture ID and fix a kernel-doc warning
   - fsmc: kill pdata support
   - lpc32xx_slc: remove unneeded NULL check
   - support dynamic "max bad blocks" detection via ONFI

  SPI NOR:
   - add support for the 4-byte address instruction set
   - add support for new memory parts
   - add support to S3AN memories
   - add support to the Intel SPI controller
   - add support to the Aspeed AST2400 and AST2550 controllers
   - support max SPI message sizes in m25p80_read()
   - fixes for the Candence and Freescale QSPI drivers

  Other:
   - add support for Gemini flash probing
   - bcm47xxsflash: add support for reading outside memory-mapped window
   - bcm47xxparts: extend to support multiple TRX partitions
   - misc fixes and typos

  Extra note: we've pulled in an MFD subtree from Lee Jones as a
  dependency for a new Intel SPI NOR driver"

[ Kudos to Brian for sending pull request a week early:

   "I refuse to acknowledge the existence of 4.10-rc8 and am therefore
    sending our MTD changes for 4.11 now"

  which is all good ]

* tag 'for-linus-20170212' of git://git.infradead.org/linux-mtd: (52 commits)
  mtd: aspeed: remove redundant dev_err call in aspeed_smc_probe()
  dt-bindings: mtd: add a common label property to all mtd devices
  mtd: name the mtd device with an optional label property
  mtd: physmap_of: fixup gemini/versatile dependencies
  mtd: spi-nor: cqspi: remove redundant dead code on error return check
  Documentation: mtk-quadspi: update DT bindings
  mtd: fsl-quadspi: Rename SEQID_QUAD_READ to SEQID_READ
  mtd:fsl-quadspi:use the property fields of SPI-NOR
  mtd: spi-nor: Add support for gd25q16
  mtd: spi-nor: Fix S3AN addressing calculation
  mtd: aspeed: fix compile warning in aspeed_smc_read_from_ahb()
  mtd: spi-nor: add dt support for Everspin MRAMs
  mtd: spi-nor: Add lock/unlock support for f25l32pa
  mtd: spi-nor: add a stateless method to support memory size above 128Mib
  mtd: spi-nor: rename SPINOR_OP_* macros of the 4-byte address op codes
  mtd: m25p80: consider max message size in m25p80_read
  mtd: spi-nor: bindings for the Aspeed memory controllers
  mtd: aspeed: add memory controllers for the Aspeed AST2400 SoC
  mtd: spi-nor: add memory controllers for the Aspeed AST2500 SoC
  mtd: spi-nor: remove WARN_ONCE() message in spi_nor_write()
  ...

Stupid bug that wrecked the alignment of task_struct and causes WARN()s
in the x86 FPU code on some platforms.
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Tested-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: e274795e ("locking/mutex: Fix mutex handoff")
Link: http://lkml.kernel.org/r/20170218142645.GH6500@twins.programming.kicks-ass.netSigned-off-by: Ingo Molnar <mingo@kernel.org>

What happens is that a write to /dev/sg is given a request with non-zero
->iovec_count combined with zero ->dxfer_len.  Or with ->dxferp pointing
to an array full of empty iovecs.

Having write permission to /dev/sg shouldn't be equivalent to the
ability to trigger BUG_ON() while holding spinlocks...

Found by Dmitry Vyukov and syzkaller.

[ The BUG_ON() got changed to a WARN_ON_ONCE(), but this fixes the
  underlying issue.  - Linus ]
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: stable@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Don't crash the machine just because of an empty transfer. Use WARN_ON()
combined with returning an error.

Found by Dmitry Vyukov and syzkaller.

[ Changed to "WARN_ON_ONCE()". Al has a patch that should fix the root
  cause, but a BUG_ON() is not acceptable in any case, and a WARN_ON()
  might still be a cause of excessive log spamming.

  NOTE! If this warning ever triggers, we may end up leaking resources,
  since this doesn't bother to try to clean the command up. So this
  WARN_ON_ONCE() triggering does imply real problems. But BUG_ON() is
  much worse.

  People really need to stop using BUG_ON() for "this shouldn't ever
  happen". It makes pretty much any bug worse.     - Linus ]
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Cc: James Bottomley <jejb@linux.vnet.ibm.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

'devm_ioremap()' returns NULL on error, not an error pointer.

Fixes: f20cc9b0 ("irqchip/qcom: Add IRQ combiner driver")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Cc: marc.zyngier@arm.com
Cc: kernel-janitors@vger.kernel.org
Cc: jason@lakedaemon.net
Link: http://lkml.kernel.org/r/20170218083434.2289-1-christophe.jaillet@wanadoo.frSigned-off-by: Thomas Gleixner <tglx@linutronix.de>

If ip6_dst_lookup_tail has acquired a dst and fails the IPv4-mapped
check, release the dst before returning an error.

Fixes: ec5e3b0a ("ipv6: Inhibit IPv4-mapped src address on the wire.")
Signed-off-by: Willem de Bruijn <willemb@google.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull ARM SoC fixes from Arnd Bergmann:
 "Two more bugfixes that came in during this week:

   - a defconfig change to enable a vital driver used on some Qualcomm
     based phones. This was already queued for 4.11, but the maintainer
     asked to have it in 4.10 after all.

   - a regression fix for the reset controller framework, this got
     broken by a typo in the 4.10 merge window"

* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ARM: multi_v7_defconfig: enable Qualcomm RPMCC
  reset: fix shared reset triggered_count decrement on error

Pull ARM fixes from Russell King:
 "A couple of fixes from Kees concerning problems he spotted with our
  user access support"

* 'fixes' of git://git.armlinux.org.uk/~rmk/linux-arm:
  ARM: 8658/1: uaccess: fix zeroing of 64-bit get_user()
  ARM: 8657/1: uaccess: consistently check object sizes

Pull x86 fix from Thomas Gleixner:
 "Make the build clean by working around yet another GCC stupidity"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/vm86: Fix unused variable warning if THP is disabled

Pull locking fix from Thomas Gleixner:
 "Move the futex init function to core initcall so user mode helper does
  not run into an uninitialized futex syscall"

* 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  futex: Move futex_init() to core_initcall

Pull timer fixes from Thomas Gleixner:
 "Two small fixes::

   - Prevent deadlock on the tick broadcast lock. Found and fixed by
     Mike.

   - Stop using printk() in the timekeeping debug code to prevent a
     deadlock against the scheduler"

* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  timekeeping: Use deferred printk() in debug code
  tick/broadcast: Prevent deadlock on tick_broadcast_lock

Pull networking fixes from David Miller:

 1) Fix leak in dpaa_eth error paths, from Dan Carpenter.

 2) Use after free when using IPV6_RECVPKTINFO, from Andrey Konovalov.

 3) fanout_release() cannot be invoked from atomic contexts, from Anoob
    Soman.

 4) Fix bogus attempt at lockdep annotation in IRDA.

 5) dev_fill_metadata_dst() can OOP on a NULL dst cache pointer, from
    Paolo Abeni.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net:
  irda: Fix lockdep annotations in hashbin_delete().
  vxlan: fix oops in dev_fill_metadata_dst
  dccp: fix freeing skb too early for IPV6_RECVPKTINFO
  dpaa_eth: small leak on error
  packet: Do not call fanout_release from atomic contexts

Use rcuidle console tracepoint because, apparently, it may be issued
from an idle CPU:

  hw-breakpoint: Failed to enable monitor mode on CPU 0.
  hw-breakpoint: CPU 0 failed to disable vector catch

  ===============================
  [ ERR: suspicious RCU usage.  ]
  4.10.0-rc8-next-20170215+ #119 Not tainted
  -------------------------------
  ./include/trace/events/printk.h:32 suspicious rcu_dereference_check() usage!

  other info that might help us debug this:

  RCU used illegally from idle CPU!
  rcu_scheduler_active = 2, debug_locks = 0
  RCU used illegally from extended quiescent state!
  2 locks held by swapper/0/0:
   #0:  (cpu_pm_notifier_lock){......}, at: [<c0237e2c>] cpu_pm_exit+0x10/0x54
   #1:  (console_lock){+.+.+.}, at: [<c01ab350>] vprintk_emit+0x264/0x474

  stack backtrace:
  CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.10.0-rc8-next-20170215+ #119
  Hardware name: Generic OMAP4 (Flattened Device Tree)
    console_unlock
    vprintk_emit
    vprintk_default
    printk
    reset_ctrl_regs
    dbg_cpu_pm_notify
    notifier_call_chain
    cpu_pm_exit
    omap_enter_idle_coupled
    cpuidle_enter_state
    cpuidle_enter_state_coupled
    do_idle
    cpu_startup_entry
    start_kernel

This RCU warning, however, is suppressed by lockdep_off() in printk().
lockdep_off() increments the ->lockdep_recursion counter and thus
disables RCU_LOCKDEP_WARN() and debug_lockdep_rcu_enabled(), which want
lockdep to be enabled "current->lockdep_recursion == 0".

Link: http://lkml.kernel.org/r/20170217015932.11898-1-sergey.senozhatsky@gmail.comSigned-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Reported-by: Tony Lindgren <tony@atomide.com>
Tested-by: Tony Lindgren <tony@atomide.com>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Russell King <rmk@armlinux.org.uk>
Cc: <stable@vger.kernel.org> [3.4+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This patch enables the Qualcomm RPM based Clock Controller present on
A-family boards.
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

commit 82e88ff1 ("hrtimer: Revert CLOCK_MONOTONIC_RAW support") removed
unfortunately a sanity check in the hrtimer code which was part of that
MONOTONIC_RAW patch series.

It would have caught the bogus usage of CLOCK_MONOTONIC_RAW in the wireless
code. So bring it back.

It is way too easy to take any random clockid and feed it to the hrtimer
subsystem. At best, it gets mapped to a monotonic base, but it would be
better to just catch illegal values as early as possible.
    
Detect invalid clockids, map them to CLOCK_MONOTONIC and emit a warning.

[ tglx: Replaced the BUG by a WARN and gracefully map to CLOCK_MONOTONIC ]
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Cc: Tomasz Nowicki <tn@semihalf.com>
Cc: Christoffer Dall <christoffer.dall@linaro.org>
Link: http://lkml.kernel.org/r/1452879670-16133-3-git-send-email-marc.zyngier@arm.comSigned-off-by: Thomas Gleixner <tglx@linutronix.de>

A nested lock depth was added to the hasbin_delete() code but it
doesn't actually work some well and results in tons of lockdep splats.

Fix the code instead to properly drop the lock around the operation
and just keep peeking the head of the hashbin queue.
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Tested-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull block layer fix from Jens Axboe:
 "A single fix for a lockdep splat reported by Thomas and Gabriel"

* 'for-linus' of git://git.kernel.dk/linux-block:
  cfq-iosched: don't call wbt_disable_default() with IRQs disabled

Since the commit 0c1d70af ("net: use dst_cache for vxlan device")
vxlan_fill_metadata_dst() calls vxlan_get_route() passing a NULL
dst_cache pointer, so the latter should explicitly check for
valid dst_cache ptr. Unfortunately the commit d71785ff ("net: add
dst_cache to ovs vxlan lwtunnel") removed said check.

As a result is possible to trigger a null pointer access calling
vxlan_fill_metadata_dst(), e.g. with:

ovs-vsctl add-br ovs-br0
ovs-vsctl add-port ovs-br0 vxlan0 -- set interface vxlan0 \
	type=vxlan options:remote_ip=192.168.1.1 \
	options:key=1234 options:dst_port=4789 ofport_request=10
ip address add dev ovs-br0 172.16.1.2/24
ovs-vsctl set Bridge ovs-br0 ipfix=@i -- --id=@i create IPFIX \
	targets=\"172.16.1.1:1234\" sampling=1
iperf -c 172.16.1.1 -u -l 1000 -b 10M -t 1 -p 1234

This commit addresses the issue passing to vxlan_get_route() the
dst_cache already available into the lwt info processed by
vxlan_fill_metadata_dst().

Fixes: d71785ff ("net: add dst_cache to ovs vxlan lwtunnel")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Acked-by: Jiri Benc <jbenc@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In the current DCCP implementation an skb for a DCCP_PKT_REQUEST packet
is forcibly freed via __kfree_skb in dccp_rcv_state_process if
dccp_v6_conn_request successfully returns.

However, if IPV6_RECVPKTINFO is set on a socket, the address of the skb
is saved to ireq->pktopts and the ref count for skb is incremented in
dccp_v6_conn_request, so skb is still in use. Nevertheless, it gets freed
in dccp_rcv_state_process.

Fix by calling consume_skb instead of doing goto discard and therefore
calling __kfree_skb.

Similar fixes for TCP:

fb7e2399 [TCP]: skb is unexpectedly freed.
0aea76d3 tcp: SYN packets are now
simply consumed
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull powerpc fix from Michael Ellerman:
 "One fix from Paul: we can not use the radix MMU under a hypervisor for
  now.

  Although the code checked if the processor supports radix, that is not
  sufficient"

* tag 'powerpc-4.10-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/64: Disable use of radix under a hypervisor