- 11 Oct, 2016 1 commit
-
-
Kishon Vijay Abraham I authored
dw_pcie_readl_unroll() and dw_pcie_writel_unroll() duplicate what dw_pcie_readl_rc() and dw_pcie_writel_rc() already do, so call them directly. [bhelgaas: reworked into patch series] Signed-off-by:
Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com>
-
- 06 Oct, 2016 1 commit
-
-
Bjorn Helgaas authored
Rename dw_pcie_valid_config() to dw_pcie_valid_device() and use the result directly as a boolean value instead of testing against 0. No functional change intended. Signed-off-by:
-
- 05 Oct, 2016 2 commits
-
-
Bjorn Helgaas authored
* pci/host-vmd: x86/PCI: VMD: Move VMD driver to drivers/pci/host x86/PCI: VMD: Synchronize with RCU freeing MSI IRQ descs x86/PCI: VMD: Eliminate index member from IRQ list x86/PCI: VMD: Eliminate vmd_vector member from list type x86/PCI: VMD: Convert to use pci_alloc_irq_vectors() API x86/PCI: VMD: Allocate IRQ lists with correct MSI-X count PCI: Use positive flags in pci_alloc_irq_vectors() PCI: Update "pci=resource_alignment" documentation Conflicts: drivers/pci/host/Kconfig drivers/pci/host/Makefile
-
Bjorn Helgaas authored
Merge branches 'pci/host-aardvark', 'pci/host-altera', 'pci/host-artpec', 'pci/host-designware', 'pci/host-hv', 'pci/host-keystone', 'pci/host-rcar', 'pci/host-rockchip', 'pci/host-tegra' and 'pci/host-xilinx' into next * pci/host-aardvark: PCI: aardvark: Remove redundant dev_err call in advk_pcie_probe() * pci/host-altera: PCI: altera: Remove redundant platform_get_resource() return value check PCI: altera: Move retrain from fixup to altera_pcie_host_init() PCI: altera: Rework config accessors for use without a struct pci_bus PCI: altera: Poll for link training status after retraining the link * pci/host-artpec: PCI: artpec6: Drop __init from artpec6_add_pcie_port() * pci/host-designware: PCI: designware: Remove redundant platform_get_resource() return value check PCI: designware: Exchange viewport of `MEMORYs' and `CFGs/IOs' PCI: designware: Keep viewport fixed for IO transaction if num_viewport > 2 PCI: designware: Check LTSSM training bit before deciding link is up PCI: designware: Add iATU Unroll feature PCI: designware: Wait for iATU enable PCI: designware: Move link wait definitions to .c file PCI: designware: Return data directly from dw_pcie_readl_rc() * pci/host-hv: PCI: hv: Handle hv_pci_generic_compl() error case PCI: hv: Handle vmbus_sendpacket() failure in hv_compose_msi_msg() PCI: hv: Remove the unused 'wrk' in struct hv_pcibus_device PCI: hv: Use pci_function_description[0] in struct definitions PCI: hv: Use zero-length array in struct pci_packet PCI: hv: Use list_move_tail() instead of list_del() + list_add_tail() * pci/host-keystone: PCI: keystone: Propagate request_irq() failure * pci/host-rcar: PCI: rcar: Try increasing PCIe link speed to 5 GT/s at boot PCI: rcar: Fix some checkpatch warnings PCI: rcar: Add multi-MSI support PCI: rcar: Don't disable/unprepare clocks on prepare/enable failure PCI: rcar: Consolidate register space lookup and ioremap * pci/host-rockchip: PCI: rockchip: Fix wrong transmitted FTS count PCI: rockchip: Improve the deassert sequence of four reset pins PCI: rockchip: Increase the Max Credit update interval PCI: rockchip: Add Rockchip PCIe controller support dt-bindings: PCI: rockchip: Add DT bindings for Rockchip PCIe controller * pci/host-tegra: PCI: tegra: Use of_device_get_match_data() PCI: tegra: Remove redundant _data suffix * pci/host-xilinx: microblaze/PCI: Add multidomain support for procfs PCI: xilinx: Dispose of MSI virtual IRQ PCI: xilinx: Clear correct MSI set bit PCI: xilinx: Clear interrupt register for invalid interrupt PCI: xilinx: Keep both legacy and MSI interrupt domain references PCI: xilinx-nwl: Enable all MSI interrupts using MSI mask PCI: xilinx-nwl: Expand error logging Conflicts: drivers/pci/host/pcie-xilinx.c
-
- 04 Oct, 2016 5 commits
-
-
Keith Busch authored
Move the driver source and Kconfig to the PCI host bridge drivers directory and move the config option to a more appropriate sub-menu instead of occupying the top-level location. Update the Kconfig option with the X86_64 dependency that was implicitly included from the previous location, and add information about the module name when built as a loadable module. Signed-off-by:
Keith Busch <keith.busch@intel.com> Signed-off-by:
-
Shawn Lin authored
If the expected number of FTS aren't received by RC when exiting from L0s, the LTSSM will fall into recover state, which means it will need to send TS for retraining which makes the latency of exiting from L0s a little longer than expected. This issue is caused by an incorrect reset value of FTS count on PLC1 register (offset 0x4). The expected value for Gen1/2 should be more than 240 and we may leave a little margin here. Fix this before starting Gen1 training which will make TS1 contain the correct FTS count. Signed-off-by:
Shawn Lin <shawn.lin@rock-chips.com> Signed-off-by:
-
Shawn Lin authored
Per TRM, we need to deassert the four reset pins simultaneously. Currently the reset framework doesn't support that so we did it one by one. It seems no side effect found but it does impact the state machine of controller, so sometimes the change speed bit is not set when sending training sequence from recover state. After the silicon RTL review from SoC guys, we don't need to do the sequence recommended by TRM, and could just move the deassert of mgmt_sticky_rst to the first place. Signed-off-by:
-
Rajat Jain authored
Increase the likelihood of link state to automatically go to L1 and save some power. The default credit update interval of 7.5 us results in the rootport sending UpdateFC-P and UpdateFC-NP packets too often, thus resulting in the link never going to L1, and always staying in L0/L0s. The value 24 us was chosen after some experiments and peeking over the PCIe bus to see that we do enter L1 substate when there is not enough traffic on the PCIe bus. Signed-off-by:
Rajat Jain <rajatja@google.com> Signed-off-by:
-
Sergei Shtylyov authored
The PCIe link speed is initially set to 2.5 GT/s. Try to increase the link speed to 5 GT/s. Based on original patch by Grigory Kletsko <grigory.kletsko@cogentembedded.com>. [bhelgaas: remove "Trying speed up" message, remove unused SPCHG] Signed-off-by:
Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by:
Simon Horman <horms+renesas@verge.net.au>
-
- 03 Oct, 2016 8 commits
-
-
Bjorn Helgaas authored
* pci/virtualization: PCI: xilinx: Relax device number checking to allow SR-IOV PCI: designware: Relax device number checking to allow SR-IOV PCI: altera: Relax device number checking to allow SR-IOV PCI: Check for pci_setup_device() failure in pci_iov_add_virtfn() PCI: Mark Atheros AR9580 to avoid bus reset
-
Bjorn Helgaas authored
* pci/resource: PCI: Ignore requested alignment for VF BARs PCI: Ignore requested alignment for PROBE_ONLY and fixed resources
-
Bjorn Helgaas authored
* pci/pm: PCI: Avoid unnecessary resume after direct-complete PCI: Recognize D3cold in pci_update_current_state() PCI: Query platform firmware for device power state PCI: Afford direct-complete to devices with non-standard PM
-
Bjorn Helgaas authored
* pci/msi: PCI/MSI: Enable PCI_MSI_IRQ_DOMAIN support for ARC
-
Bjorn Helgaas authored
* pci/misc: PCI: Drop CONFIG_KEXEC_CORE ifdeffery
-
Bjorn Helgaas authored
* pci/hotplug: x86/PCI: VMD: Request userspace control of PCIe hotplug indicators PCI: pciehp: Allow exclusive userspace control of indicators PCI: pciehp: Remove useless pciehp_get_latch_status() calls PCI: pciehp: Clean up dmesg "Slot(%s)" messages PCI: pciehp: Remove unnecessary guard PCI: pciehp: Don't re-read Slot Status when handling surprise event PCI: pciehp: Don't re-read Slot Status when queuing hotplug event PCI: pciehp: Process all hotplug events before looking for new ones PCI: pciehp: Return IRQ_NONE when we can't read interrupt status PCI: pciehp: Rename pcie_isr() locals for clarity PCI: pciehp: Clear attention LED on device add
-
Bjorn Helgaas authored
* pci/enumeration: PCI: tegra: Fix pci_remap_iospace() failure path PCI: generic: Fix pci_remap_iospace() failure path PCI: rcar: Fix pci_remap_iospace() failure path PCI: versatile: Fix pci_remap_iospace() failure path PCI: designware: Fix pci_remap_iospace() failure path PCI: aardvark: Fix pci_remap_iospace() failure path
-
Bjorn Helgaas authored
* pci/aer: PCI/AER: Fix aer_probe() kernel-doc comment PCI/AER: Cache capability position PCI/AER: Avoid memory allocation in interrupt handling path ACPI / APEI: Send correct severity to calculate AER severity PCI/AER: Remove duplicate AER severity translation PCI/AER: Remove aerdriver.forceload kernel parameter PCI/AER: Remove aerdriver.nosourceid kernel parameter x86/PCI: VMD: Add quirk for AER to ignore source ID PCI/AER: Add bus flag to skip source ID matching Conflicts: drivers/pci/probe.c
-
- 30 Sep, 2016 1 commit
-
-
Cao jin authored
0516c8bc ("PCI: PCIe portdrv: Simplily probe callback of service drivers") removed the "id" argument of aer_probe() but neglected to remove the kernel-doc comment. Update the comment. [bhelgaas: changelog] Signed-off-by:
Cao jin <caoj.fnst@cn.fujitsu.com> Signed-off-by:
-
- 28 Sep, 2016 6 commits
-
-
Yongji Xie authored
Resource allocation for VFs is done via the VF BARx registers in the PF's SR-IOV Capability, and the BARs in the VFs themselves are read-only zeros (see SR-IOV spec r1.1, secs 3.3.14 and 3.4.1.11). Even though the actual VF BARs are read-only zeros, the VF dev->resource[] structs describe the space allocated for the VF (this is a piece of the space described by the VF BARx register in the PF's SR-IOV capability). It's meaningless to request additional alignment for a VF: the VF BAR alignment is completely determined by the alignment of the VF BARx in the PF and the size of the VF BAR. Ignore the user's alignment requests for VF devices. Signed-off-by:
Yongji Xie <xyjxie@linux.vnet.ibm.com> Signed-off-by:
-
Yongji Xie authored
Users may request additional alignment of PCI resources, e.g., to align BARs on page boundaries so they can be shared with guests via VFIO. This of course may require reallocation if firmware has already assigned the BARs with smaller alignments. If the platform has requested PCI_PROBE_ONLY, we should never change any PCI BARs, so we can't provide any additional alignment. Also, if a BAR is marked as IORESOURCE_PCI_FIXED, e.g., for PCI Enhanced Allocation or if the firmware depends on the current BAR value, we can't change the alignment. In these cases, log a message and ignore the user's alignment requests. [bhelgaas: changelog, use goto to simplify PCI_PROBE_ONLY check] Signed-off-by:
-
Lukas Wunner authored
Commit 58a1fbbb ("PM / PCI / ACPI: Kick devices that might have been reset by firmware") added a runtime resume for devices that were runtime suspended when the system entered sleep. The motivation was that devices might be in a reset-power-on state after waking from system sleep, so their power state as perceived by Linux (stored in pci_dev->current_state) would no longer reflect reality. By resuming such devices, we allow them to return to a low-power state via autosuspend and also bring their current_state in sync with reality. However for devices that are *not* in a reset-power-on state, doing an unconditional resume wastes energy. A more refined approach is called for which issues a runtime resume only if the power state after direct-complete is shallower than it was before. To achieve this, update the device's current_state and compare it to its pre-sleep value. Signed-off-by:
Lukas Wunner <lukas@wunner.de> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com>
-
Lukas Wunner authored
Whenever a device is resumed or its power state is changed using the platform, its new power state is read from the PM Control & Status Register and cached in pci_dev->current_state by calling pci_update_current_state(). If the device is in D3cold, reading from config space typically results in a fabricated "all ones" response. But if it's in D3hot, the two bits representing the power state in the PMCSR are *also* set to 1. Thus D3hot and D3cold are not discernible by just reading the PMCSR. To account for this, pci_update_current_state() uses two workarounds: - When transitioning to D3cold using pci_platform_power_transition(), the new power state is set blindly by pci_update_current_state(), i.e. without verifying that the device actually *is* in D3cold. This is achieved by setting the "state" argument to PCI_D3cold. The "state" argument was originally intended to convey the new state in case the device doesn't have the PM capability. It is *also* used to convey the device state if the PM capability is present and the new state is D3cold, but this was never explained in the kerneldoc. - Once the current_state is set to D3cold, further invocations of pci_update_current_state() will blindly assume that the device is still in D3cold and leave the current_state unmodified. To get out of this impasse, the current_state has to be set directly, typically by calling pci_raw_set_power_state() or pci_enable_device(). It would be desirable if pci_update_current_state() could reliably detect D3cold by itself. That would allow us to do away with these workarounds, and it would allow for a smarter, more energy conserving runtime resume strategy after system sleep: Currently devices which utilize direct_complete are mandatorily runtime resumed in their ->complete stage. This can be avoided if their power state after system sleep is the same as before, but it requires a mechanism to detect the power state reliably. We've just gained the ability to query the platform firmware for its opinion on the device's power state. On platforms conforming to ACPI 4.0 or newer, this allows recognition of D3cold. Pre-4.0 platforms lack _PR3 and therefore the deepest power state that will ever be reported is D3hot, even though the device may actually be in D3cold. To detect D3cold in those cases, accessibility of the vendor ID in config space is probed using pci_device_is_present(). This also works for devices which are not platform-power-manageable at all, but can be suspended to D3cold using a nonstandard mechanism (e.g. some hybrid graphics laptops or Thunderbolt on the Mac). Signed-off-by:
-
Lukas Wunner authored
Usually the most accurate way to determine a PCI device's power state is to read its PM Control & Status Register. There are two cases however when this is not an option: If the device doesn't have the PM capability at all, or if it is in D3cold (in which case its config space is inaccessible). In both cases, we can alternatively query the platform firmware for its opinion on the device's power state. To facilitate this, augment struct pci_platform_pm_ops with a ->get_power callback and implement it for acpi_pci_platform_pm (the only pci_platform_pm_ops existing so far). It is used by a forthcoming commit to let pci_update_current_state() recognize D3cold. Signed-off-by:
-
Lukas Wunner authored
There are devices not power-manageable by the platform, but still able to runtime suspend to D3cold with a non-standard mechanism. One example is laptop hybrid graphics where the discrete GPU and its built-in HDA controller are power-managed either with a _DSM (AMD PowerXpress, Nvidia Optimus) or a separate gmux controller (MacBook Pro). Another example is Thunderbolt on Macs which is power-managed with custom ACPI methods. When putting the system to sleep, we currently handle such devices improperly by transitioning them from D3cold to D3hot (the default power state defined at the top of pci_target_state()). This wastes energy and prolongs the suspend sequence (powering up the Thunderbolt controller takes 2 seconds). Avoid that by assuming that a non-standard PM mechanism is at work if the device is not platform-power-manageable but currently in D3cold. If the device is wakeup enabled, we might still have to wake it up from D3cold if PME cannot be signaled from that power state. The check for devices without PM capability comes before the check for D3cold since such devices could in theory also be powered down by non-standard means and should then be afforded direct-complete as well. Signed-off-by:
-
- 27 Sep, 2016 2 commits
-
-
Keith Busch authored
Save the position of the error reporting capability so it doesn't need to be rediscovered during error handling. Signed-off-by:
-
Jon Derrick authored
When handling AER events, we previously allocated a struct aer_err_info, processed the error, and freed the struct. But aer_isr_one_error() is serialized by rpc_mutex, so we never need more than one copy of the struct, and the struct is only about 70 bytes, so we're not saving much by allocating it dynamically. Embed a struct aer_err_info directly in struct aer_rpc, which is allocated at probe-time by aer_probe(). [bhelgaas: changelog] Suggested-by:
Jon Derrick <jonathan.derrick@intel.com> Signed-off-by:
-
- 23 Sep, 2016 1 commit
-
-
Keith Busch authored
Add set_dev_domain_options() to set PCI domain-specific options as devices are added. The first usage is to request exclusive userspace control of PCIe hotplug indicators in VMD domains. Devices in a VMD domain use PCIe hotplug Attention and Power Indicators in a non-standard way; tell pciehp to ignore the indicators so userspace can control them via the sysfs "attention" file. To determine whether a bus is within a VMD domain, add a bool to the pci_sysdata structure that the VMD driver sets during initialization. [bhelgaas: changelog] Requested-by:
Kapil Karkra <kapil.karkra@intel.com> Tested-by:
Artur Paszkiewicz <artur.paszkiewicz@intel.com> Signed-off-by:
-
- 22 Sep, 2016 1 commit
-
-
Keith Busch authored
PCIe hotplug supports optional Attention and Power Indicators, which are used internally by pciehp. Users can't control the Power Indicator, but they can control the Attention Indicator by writing to a sysfs "attention" file. The Slot Control register has two bits for each indicator, and the PCIe spec defines the encodings for each as (Reserved/On/Blinking/Off). For sysfs "attention" writes, pciehp_set_attention_status() maps into these encodings, so the only useful write values are 0 (Off), 1 (On), and 2 (Blinking). However, some platforms use all four bits for platform-specific indicators, and they need to allow direct user control of them while preventing pciehp from using them at all. Add a "hotplug_user_indicators" flag to the pci_dev structure. When set, pciehp does not use either the Attention Indicator or the Power Indicator, and the low four bits (values 0x0 - 0xf) of sysfs "attention" write values are written directly to the Attention Indicator Control and Power Indicator Control fields. [bhelgaas: changelog, rename flag and accessors to s/attention/indicator/] Signed-off-by:
-
- 20 Sep, 2016 2 commits
-
-
Tyler Baicar authored
Currently the AER severity is calculated by calling cper_severity_to_aer(), but the parameter sent is actually the GHES severity. This causes the AER severity to be incorrect. Fix the parameter to be the CPER severity instead of the GHES severity. Signed-off-by:
Tyler Baicar <tbaicar@codeaurora.org> Signed-off-by:
Borislav Petkov <bp@suse.de>
-
Tyler Baicar authored
Currently the AER severity is being translated twice in the code flow for PCIe errors. It is first translated in ghes_do_proc() before calling into the AER driver. Then it is translated again when the AER driver calls cper_print_aer(). This causes the severity that is used in cper_print_aer() to be incorrect. Remove the second translation that is in cper_print_aer() since this function is already receiving the correct AER severity. Signed-off-by:
-
- 19 Sep, 2016 5 commits
-
-
Keith Busch authored
Fix a potential race when disabling MSI/MSI-X on a VMD domain device. If the VMD interrupt service is running, it may see a disabled IRQ. We can synchronize RCU just before freeing the MSI descriptor. This is safe since the irq_desc lock isn't held, and the descriptor is valid even though it is disabled. After vmd_msi_free(), though, the handler is reinitialized to handle_bad_irq(), so we can't let the VMD ISR's list iteration see the disabled IRQ after this. Signed-off-by:
-
Jon Derrick authored
Use math to discover the IRQ list index number relative to the IRQ list head. Signed-off-by:
-
Jon Derrick authored
Eliminate unused vmd and vector members from vmd_irq_list and discover the vector using pci_irq_vector(). Signed-off-by:
-
Jon Derrick authored
Convert to use the pci_alloc_irq_vectors() API. Signed-off-by:
-
Jon Derrick authored
To reduce the amount of memory required for IRQ lists, only allocate their space after calling pci_msix_enable_range() which may reduce the number of MSI-X vectors allocated. Signed-off-by:
-
- 14 Sep, 2016 5 commits
-
-
Niklas Cassel authored
artpec6_add_pcie_port() is called from artpec6_pcie_probe(), which is not marked __init. It is wrong to call an __init function from a non-__init one, so remove __init from artpec6_add_pcie_port(). [bhelgaas: changelog] Signed-off-by:
Niklas Cassel <niklas.cassel@axis.com> Signed-off-by:
-
Sergei Shtylyov authored
The R-Car PCIe driver causes 13 warnings from scripts/checkpatch.pl -- let's fix at least 10 easier ones: - line over 80 characters; - blank line missing after declarations; - statements not starting on a tabstop. Signed-off-by:
-
Grigory Kletsko authored
Implement the MSI .setup_irqs() method which enables allocation of several MSIs at once. [Sergei Shtylyov: removed unrelated/unneeded changes, fixed too long lines, reordered the variable declarations, reworded the summary/description.] Signed-off-by:
Grigory Kletsko <grigory.kletsko@cogentembedded.com> Signed-off-by:
-
Bjorn Helgaas authored
Per the PCI Firmware spec, r3.0, sec 4.5.1, on ACPI systems, the OS must not use AER unless _OSC is present and _OSC grants AER control to the OS. The aerdriver.forceload kernel parameter was a way to enable Linux AER support on ACPI systems that lack _OSC or fail to grant control the the OS. Enabling Linux AER support when the firmware doesn't want us to is a recipe for problems, e.g., the firmware might be handling AER itself. Remove the aerdriver.forceload kernel parameter and related supporting code. Signed-off-by: -
Bjorn Helgaas authored
The aerdriver.nosourceid kernel parameter was intended for working around broken chipsets don't supply the source ID for AER events. We recently added PCI_BUS_FLAGS_NO_AERSID, which can be set by quirks for the same purpose. Remove the aerdriver.nosourceid kernel parameter. For anything other than debugging, asking users to find and use kernel parameters is a poor user experience. Instead, we should add PCI_BUS_FLAGS_NO_AERSID quirks for any hardware that needs it. Signed-off-by:
-
