- 03 May, 2017 19 commits
-
-
Johannes Weiner authored
Commit 246e87a9 ("memcg: fix get_scan_count() for small targets") sought to avoid high reclaim priorities for kswapd by forcing it to scan a minimum amount of pages when lru_pages >> priority yielded nothing. Commit b95a2f2d ("mm: vmscan: convert global reclaim to per-memcg LRU lists"), due to switching global reclaim to a round-robin scheme over all cgroups, had to restrict this forceful behavior to unreclaimable zones in order to prevent massive overreclaim with many cgroups. The latter patch effectively neutered the behavior completely for all but extreme memory pressure. But in those situations we might as well drop the reclaimers to lower priority levels. Remove the check. Link: http://lkml.kernel.org/r/20170228214007.5621-6-hannes@cmpxchg.orgSigned-off-by:
Johannes Weiner <hannes@cmpxchg.org> Acked-by:
Hillf Danton <hillf.zj@alibaba-inc.com> Acked-by:
Michal Hocko <mhocko@suse.com> Cc: Jia He <hejianet@gmail.com> Cc: Mel Gorman <mgorman@suse.de> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Johannes Weiner authored
NUMA balancing already checks the watermarks of the target node to decide whether it's a suitable balancing target. Whether the node is reclaimable or not is irrelevant when we don't intend to reclaim. Link: http://lkml.kernel.org/r/20170228214007.5621-5-hannes@cmpxchg.orgSigned-off-by:
-
Johannes Weiner authored
Commit 1d82de61 ("mm, vmscan: make kswapd reclaim in terms of nodes") allowed laptop_mode=1 to start writing not just when the priority drops to DEF_PRIORITY - 2 but also when the node is unreclaimable. That appears to be a spurious change in this patch as I doubt the series was tested with laptop_mode, and neither is that particular change mentioned in the changelog. Remove it, it's still recent. Link: http://lkml.kernel.org/r/20170228214007.5621-4-hannes@cmpxchg.orgSigned-off-by:
Mel Gorman <mgorman@techsingularity.net> Acked-by:
-
Johannes Weiner authored
PF_MEMALLOC direct reclaimers get throttled on a node when the sum of all free pages in each zone fall below half the min watermark. During the summation, we want to exclude zones that don't have reclaimables. Checking the same pgdat over and over again doesn't make sense. Fixes: 599d0c95 ("mm, vmscan: move LRU lists to node") Link: http://lkml.kernel.org/r/20170228214007.5621-3-hannes@cmpxchg.orgSigned-off-by:
-
Johannes Weiner authored
Patch series "mm: kswapd spinning on unreclaimable nodes - fixes and cleanups". Jia reported a scenario in which the kswapd of a node indefinitely spins at 100% CPU usage. We have seen similar cases at Facebook. The kernel's current method of judging its ability to reclaim a node (or whether to back off and sleep) is based on the amount of scanned pages in proportion to the amount of reclaimable pages. In Jia's and our scenarios, there are no reclaimable pages in the node, however, and the condition for backing off is never met. Kswapd busyloops in an attempt to restore the watermarks while having nothing to work with. This series reworks the definition of an unreclaimable node based not on scanning but on whether kswapd is able to actually reclaim pages in MAX_RECLAIM_RETRIES (16) consecutive runs. This is the same criteria the page allocator uses for giving up on direct reclaim and invoking the OOM killer. If it cannot free any pages, kswapd will go to sleep and leave further attempts to direct reclaim invocations, which will either make progress and re-enable kswapd, or invoke the OOM killer. Patch #1 fixes the immediate problem Jia reported, the remainder are smaller fixlets, cleanups, and overall phasing out of the old method. Patch #6 is the odd one out. It's a nice cleanup to get_scan_count(), and directly related to #5, but in itself not relevant to the series. If the whole series is too ambitious for 4.11, I would consider the first three patches fixes, the rest cleanups. This patch (of 9): Jia He reports a problem with kswapd spinning at 100% CPU when requesting more hugepages than memory available in the system: $ echo 4000 >/proc/sys/vm/nr_hugepages top - 13:42:59 up 3:37, 1 user, load average: 1.09, 1.03, 1.01 Tasks: 1 total, 1 running, 0 sleeping, 0 stopped, 0 zombie %Cpu(s): 0.0 us, 12.5 sy, 0.0 ni, 85.5 id, 2.0 wa, 0.0 hi, 0.0 si, 0.0 st KiB Mem: 31371520 total, 30915136 used, 456384 free, 320 buffers KiB Swap: 6284224 total, 115712 used, 6168512 free. 48192 cached Mem PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 76 root 20 0 0 0 0 R 100.0 0.000 217:17.29 kswapd3 At that time, there are no reclaimable pages left in the node, but as kswapd fails to restore the high watermarks it refuses to go to sleep. Kswapd needs to back away from nodes that fail to balance. Up until commit 1d82de61 ("mm, vmscan: make kswapd reclaim in terms of nodes") kswapd had such a mechanism. It considered zones whose theoretically reclaimable pages it had reclaimed six times over as unreclaimable and backed away from them. This guard was erroneously removed as the patch changed the definition of a balanced node. However, simply restoring this code wouldn't help in the case reported here: there *are* no reclaimable pages that could be scanned until the threshold is met. Kswapd would stay awake anyway. Introduce a new and much simpler way of backing off. If kswapd runs through MAX_RECLAIM_RETRIES (16) cycles without reclaiming a single page, make it back off from the node. This is the same number of shots direct reclaim takes before declaring OOM. Kswapd will go to sleep on that node until a direct reclaimer manages to reclaim some pages, thus proving the node reclaimable again. [hannes@cmpxchg.org: check kswapd failure against the cumulative nr_reclaimed count] Link: http://lkml.kernel.org/r/20170306162410.GB2090@cmpxchg.org [shakeelb@google.com: fix condition for throttle_direct_reclaim] Link: http://lkml.kernel.org/r/20170314183228.20152-1-shakeelb@google.com Link: http://lkml.kernel.org/r/20170228214007.5621-2-hannes@cmpxchg.orgSigned-off-by:
Shakeel Butt <shakeelb@google.com> Reported-by:
Jia He <hejianet@gmail.com> Tested-by:
Minchan Kim <minchan@kernel.org> Signed-off-by:
-
Greg Thelen authored
Each slab kmem cache has per cpu array caches. The array caches are created when the kmem_cache is created, either via kmem_cache_create() or lazily when the first object is allocated in context of a kmem enabled memcg. Array caches are replaced by writing to /proc/slabinfo. Array caches are protected by holding slab_mutex or disabling interrupts. Array cache allocation and replacement is done by __do_tune_cpucache() which holds slab_mutex and calls kick_all_cpus_sync() to interrupt all remote processors which confirms there are no references to the old array caches. IPIs are needed when replacing array caches. But when creating a new array cache, there's no need to send IPIs because there cannot be any references to the new cache. Outside of memcg kmem accounting these IPIs occur at boot time, so they're not a problem. But with memcg kmem accounting each container can create kmem caches, so the IPIs are wasteful. Avoid unnecessary IPIs when creating array caches. Test which reports the IPI count of allocating slab in 10000 memcg: import os def ipi_count(): with open("/proc/interrupts") as f: for l in f: if 'Function call interrupts' in l: return int(l.split()[1]) def echo(val, path): with open(path, "w") as f: f.write(val) n = 10000 os.chdir("/mnt/cgroup/memory") pid = str(os.getpid()) a = ipi_count() for i in range(n): os.mkdir(str(i)) echo("1G\n", "%d/memory.limit_in_bytes" % i) echo("1G\n", "%d/memory.kmem.limit_in_bytes" % i) echo(pid, "%d/cgroup.procs" % i) open("/tmp/x", "w").close() os.unlink("/tmp/x") b = ipi_count() print "%d loops: %d => %d (+%d ipis)" % (n, a, b, b-a) echo(pid, "cgroup.procs") for i in range(n): os.rmdir(str(i)) patched: 10000 loops: 1069 => 1170 (+101 ipis) unpatched: 10000 loops: 1192 => 48933 (+47741 ipis) Link: http://lkml.kernel.org/r/20170416214544.109476-1-gthelen@google.comSigned-off-by:Greg Thelen <gthelen@google.com> Acked-by:
Joonsoo Kim <iamjoonsoo.kim@lge.com> Acked-by:
David Rientjes <rientjes@google.com> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Signed-off-by:
-
Geliang Tang authored
Use offset_in_page() macro instead of open-coding. Link: http://lkml.kernel.org/r/4dbc77ccaaed98b183cf4dba58a4fa325fd65048.1492758503.git.geliangtang@gmail.comSigned-off-by:
Geliang Tang <geliangtang@gmail.com> Cc: Mark Fasheh <mfasheh@versity.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Joseph Qi <jiangqi903@gmail.com> Signed-off-by:
-
Junxiao Bi authored
Configfs is the interface for ocfs2-tools to set configure to kernel and $configfs_dir/cluster/$clustername/heartbeat/dead_threshold is the one used to configure heartbeat dead threshold. Kernel has a default value of it but user can set O2CB_HEARTBEAT_THRESHOLD in /etc/sysconfig/o2cb to override it. Commit 45b99773 ("ocfs2/cluster: use per-attribute show and store methods") changed heartbeat dead threshold name while ocfs2-tools did not, so ocfs2-tools won't set this configurable and the default value is always used. So revert it. Fixes: 45b99773 ("ocfs2/cluster: use per-attribute show and store methods") Link: http://lkml.kernel.org/r/1490665245-15374-1-git-send-email-junxiao.bi@oracle.comSigned-off-by:
Junxiao Bi <junxiao.bi@oracle.com> Acked-by:
Joseph Qi <jiangqi903@gmail.com> Cc: Mark Fasheh <mfasheh@versity.com> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by:
-
Geliang Tang authored
Use setup_timer() instead of init_timer() to simplify the code. Link: http://lkml.kernel.org/r/5e75bf07beb91e092d5aa36c36769949a480456a.1489060564.git.geliangtang@gmail.comSigned-off-by:
-
Masahiro Yamada authored
In many of clk_disable() implementations, it is a no-op for a NULL pointer input, but this is one of the exceptions. Making it treewide consistent will allow clock consumers to call clk_disable() without NULL pointer check. Link: http://lkml.kernel.org/r/1490692624-11931-4-git-send-email-yamada.masahiro@socionext.comSigned-off-by:
Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Michael Turquette <mturquette@baylibre.com> Cc: Steven Miao <realmz6@gmail.com> Signed-off-by:
-
Colin Ian King authored
Here are some of the more common spelling mistakes that I've found while fixing up spelling mistakes in kernel error message text. They probably should be added to this list so we don't keep on seeing them appearing again. Link: http://lkml.kernel.org/r/20170421122534.5378-1-colin.king@canonical.comSigned-off-by:
Colin Ian King <colin.king@canonical.com> Acked-by:
Kees Cook <keescook@chromium.org> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Joe Perches <joe@perches.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by:
-
Pankaj Gupta authored
Interrupt enable/disabled with spinlock is not a valid operation for RT as it can make executing tasks sleep from a non-sleepable context. So convert it to spin_lock_irq[save, restore]. Link: http://lkml.kernel.org/r/1492065666-3816-1-git-send-email-pagupta@redhat.comSigned-off-by:
Pankaj Gupta <pagupta@redhat.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Cc: Vinod Koul <vinod.koul@intel.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Ville Syrjl <ville.syrjala@linux.intel.com> Cc: Miles Chen <miles.chen@mediatek.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Joerg Roedel <jroedel@suse.de> Cc: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by:
-
git://git.infradead.org/users/pcmoore/auditLinus Torvalds authored
Pull audit updates from Paul Moore: "Fourteen audit patches for v4.12 that span the full range of fixes, new features, and internal cleanups. We have a patches to move to 64-bit timestamps, convert refcounts from atomic_t to refcount_t, track PIDs using the pid struct instead of pid_t, convert our own private audit buffer cache to a standard kmem_cache, log kernel module names when they are unloaded, and normalize the NETFILTER_PKT to make the userspace folks happier. From a fixes perspective, the most important is likely the auditd connection tracking RCU fix; it was a rather brain dead bug that I'll take the blame for, but thankfully it didn't seem to affect many people (only one report). I think the patch subject lines and commit descriptions do a pretty good job of explaining the details and why the changes are important so I'll point you there instead of duplicating it here; as usual, if you have any questions you know where to find us. We also manage to take out more code than we put in this time, that always makes me happy :)" * 'stable-4.12' of git://git.infradead.org/users/pcmoore/audit: audit: fix the RCU locking for the auditd_connection structure audit: use kmem_cache to manage the audit_buffer cache audit: Use timespec64 to represent audit timestamps audit: store the auditd PID as a pid struct instead of pid_t audit: kernel generated netlink traffic should have a portid of 0 audit: combine audit_receive() and audit_receive_skb() audit: convert audit_watch.count from atomic_t to refcount_t audit: convert audit_tree.count from atomic_t to refcount_t audit: normalize NETFILTER_PKT netfilter: use consistent ipv4 network offset in xt_AUDIT audit: log module name on delete_module audit: remove unnecessary semicolon in audit_watch_handle_event() audit: remove unnecessary semicolon in audit_mark_handle_event() audit: remove unnecessary semicolon in audit_field_valid()
-
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-securityLinus Torvalds authored
Pull security subsystem updates from James Morris: "Highlights: IMA: - provide ">" and "<" operators for fowner/uid/euid rules KEYS: - add a system blacklist keyring - add KEYCTL_RESTRICT_KEYRING, exposes keyring link restriction functionality to userland via keyctl() LSM: - harden LSM API with __ro_after_init - add prlmit security hook, implement for SELinux - revive security_task_alloc hook TPM: - implement contextual TPM command 'spaces'" * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: (98 commits) tpm: Fix reference count to main device tpm_tis: convert to using locality callbacks tpm: fix handling of the TPM 2.0 event logs tpm_crb: remove a cruft constant keys: select CONFIG_CRYPTO when selecting DH / KDF apparmor: Make path_max parameter readonly apparmor: fix parameters so that the permission test is bypassed at boot apparmor: fix invalid reference to index variable of iterator line 836 apparmor: use SHASH_DESC_ON_STACK security/apparmor/lsm.c: set debug messages apparmor: fix boolreturn.cocci warnings Smack: Use GFP_KERNEL for smk_netlbl_mls(). smack: fix double free in smack_parse_opts_str() KEYS: add SP800-56A KDF support for DH KEYS: Keyring asymmetric key restrict method with chaining KEYS: Restrict asymmetric key linkage using a specific keychain KEYS: Add a lookup_restriction function for the asymmetric key type KEYS: Add KEYCTL_RESTRICT_KEYRING KEYS: Consistent ordering for __key_link_begin and restrict check KEYS: Add an optional lookup_restriction hook to key_type ... -
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivialLinus Torvalds authored
Pull trivial tree updates from Jiri Kosina. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: tty: fix comment for __tty_alloc_driver() init/main: properly align the multi-line comment init/main: Fix double "the" in comment Fix dead URLs to ftp.kernel.org drivers: Clean up duplicated email address treewide: Fix typo in xml/driver-api/basics.xml tools/testing/selftests/powerpc: remove redundant CFLAGS in Makefile: "-Wall -O2 -Wall" -> "-O2 -Wall" selftests/timers: Spelling s/privledges/privileges/ HID: picoLCD: Spelling s/REPORT_WRTIE_MEMORY/REPORT_WRITE_MEMORY/ net: phy: dp83848: Fix Typo UBI: Fix typos Documentation: ftrace.txt: Correct nice value of 120 priority net: fec: Fix typo in error msg and comment treewide: Fix typos in printk
-
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/livepatchingLinus Torvalds authored
Pull livepatch updates from Jiri Kosina: - a per-task consistency model is being added for architectures that support reliable stack dumping (extending this, currently rather trivial set, is currently in the works). This extends the nature of the types of patches that can be applied by live patching infrastructure. The code stems from the design proposal made [1] back in November 2014. It's a hybrid of SUSE's kGraft and RH's kpatch, combining advantages of both: it uses kGraft's per-task consistency and syscall barrier switching combined with kpatch's stack trace switching. There are also a number of fallback options which make it quite flexible. Most of the heavy lifting done by Josh Poimboeuf with help from Miroslav Benes and Petr Mladek [1] https://lkml.kernel.org/r/20141107140458.GA21774@suse.cz - module load time patch optimization from Zhou Chengming - a few assorted small fixes * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/livepatching: livepatch: add missing printk newlines livepatch: Cancel transition a safe way for immediate patches livepatch: Reduce the time of finding module symbols livepatch: make klp_mutex proper part of API livepatch: allow removal of a disabled patch livepatch: add /proc/<pid>/patch_state livepatch: change to a per-task consistency model livepatch: store function sizes livepatch: use kstrtobool() in enabled_store() livepatch: move patching functions into patch.c livepatch: remove unnecessary object loaded check livepatch: separate enabled and patched states livepatch/s390: add TIF_PATCH_PENDING thread flag livepatch/s390: reorganize TIF thread flag bits livepatch/powerpc: add TIF_PATCH_PENDING thread flag livepatch/x86: add TIF_PATCH_PENDING thread flag livepatch: create temporary klp_update_patch_state() stub x86/entry: define _TIF_ALLWORK_MASK flags explicitly stacktrace/x86: add function for detecting reliable stack traces
-
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hidLinus Torvalds authored
Pull HID subsystem updates from Jiri Kosina: - The need for HID_QUIRK_NO_INIT_REPORTS per-device quirk has been growing dramatically during past years, so the time has come to switch over the default, and perform the pro-active reading only in cases where it's really needed (multitouch, wacom). The only place where this behavior is (in some form) preserved is hiddev so that we don't introduce userspace-visible change of behavior. From Benjamin Tissoires - HID++ support for power_supply / baterry reporting. From Benjamin Tissoires and Bastien Nocera - Vast improvements / rework of DS3 and DS4 in Sony driver. From Roderick Colenbrander - Improvment (in terms of getting closer to the Microsoft's interpretation of slightly ambiguous specification) of logical range interpretation in case null-state is set in the rdesc. From Valtteri Heikkilä and Tomasz Kramkowski - A lot of newly supported device IDs and small assorted fixes * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (71 commits) HID: usbhid: Add HID_QUIRK_NOGET for Aten CS-1758 KVM switch HID: asus: support backlight on USB keyboards HID: wacom: Move wacom_remote_irq and wacom_remote_status_irq HID: wacom: generic: sync pad events only for actual packets HID: sony: remove redundant check for -ve err HID: sony: Make sure to unregister sensors on failure HID: sony: Make DS4 bt poll interval adjustable HID: sony: Set proper bit flags on DS4 output report HID: sony: DS4 use brighter LED colors HID: sony: Improve navigation controller axis/button mapping HID: sony: Use DS3 MAC address as unique identifier on USB HID: logitech-hidpp: add a sysfs file to tell we support power_supply HID: logitech-hidpp: enable HID++ 1.0 battery reporting HID: logitech-hidpp: add support for battery status for the K750 HID: logitech-hidpp: battery: provide CAPACITY_LEVEL HID: logitech-hidpp: rename battery level into capacity HID: logitech-hidpp: battery: provide ONLINE property HID: logitech-hidpp: notify battery on connect HID: logitech-hidpp: return an error if the queried feature is not present HID: logitech-hidpp: create the battery for all types of HID++ devices ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrlLinus Torvalds authored
Pull pin control updates from Linus Walleij: "This is the bulk of pin control changes for the v4.12 cycle. The extra week before the merge window actually resulted in some of the type of fixes that usually arrive after the merge window already starting to trickle in from eager developers using -next, I'm impressed. I have recruited a Samsung subsubsystem maintainer (Krzysztof) to deal with the onset of Samsung patches. It works great. Apart from that it is a boring round, just incremental updates and fixes all over the place, no serious core changes or anything exciting like that. The most pleasing to see is Julia Cartwrights work to audit the irqchip-providing drivers for realtime locking compliance. It's one of those "I should really get around to looking into that" things that have been on my TODO list since forever. Summary: Core changes: - add bi-directional and output-enable pin configurations to the generic bindings and generic pin controlling core. New drivers or subdrivers: - Armada 37xx SoC pin controller and GPIO support. - Axis ARTPEC-6 SoC pin controller support. - AllWinner A64 R_PIO controller support, and opening up the AllWinner sunxi driver for ARM64 use. - Rockchip RK3328 support. - Renesas R-Car H3 ES2.0 support. - STM32F469 support in the STM32 driver. - Aspeed G4 and G5 pin controller support. Improvements: - a whole slew of realtime improvements to drivers implementing irqchips: BCM, AMD, SiRF, sunxi, rockchip. - switch meson driver to get the GPIO ranges from the device tree. - input schmitt trigger support on the Rockchip driver. - enable the sunxi (AllWinner) driver to also be used on ARM64 silicon. - name the Qualcomm QDF2xxx GPIO lines. - support GMMR GPIO regions on the Intel Cherryview. This fixes a serialization problem on these platforms. - pad retention support for the Samsung Exynos 5433. - handle suspend-to-ram in the AT91-pio4 driver. - pin configuration support in the Aspeed driver. Cleanups: - the final name of Rockchip RK1108 was RV1108 so rename the driver and variables to stay consistent" * tag 'pinctrl-v4.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (80 commits) pinctrl: mediatek: Add missing pinctrl bindings for mt7623 pinctrl: artpec6: Fix return value check in artpec6_pmx_probe() pinctrl: artpec6: Remove .owner field for driver pinctrl: tegra: xusb: Silence sparse warnings ARM: at91/at91-pinctrl documentation: fix spelling mistake: "contoller" -> "controller" pinctrl: make artpec6 explicitly non-modular pinctrl: aspeed: g5: Add pinconf support pinctrl: aspeed: g4: Add pinconf support pinctrl: aspeed: Add core pinconf support pinctrl: aspeed: Document pinconf in devicetree bindings pinctrl: Add st,stm32f469-pinctrl compatible to stm32-pinctrl pinctrl: stm32: Add STM32F469 MCU support Documentation: dt: Remove ngpios from stm32-pinctrl binding pinctrl: stm32: replace device_initcall() with arch_initcall() pinctrl: stm32: add possibility to use gpio-ranges to declare bank range pinctrl: armada-37xx: Add gpio support pinctrl: armada-37xx: Add pin controller support for Armada 37xx pinctrl: dt-bindings: Add documentation for Armada 37xx pin controllers pinctrl: core: Make pinctrl_init_controller() static pinctrl: generic: Add bi-directional and output-enable ... -
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmcLinus Torvalds authored
Pull MMC updates from Ulf Hansson: "MMC core: - Continue to re-factor code to prepare for eMMC CMDQ and blkmq support - Introduce queue semantics to prepare for eMMC CMDQ and blkmq support - Add helper functions to manage temporary enable/disable of eMMC CMDQ - Improve wait-busy detection for SDIO MMC host: - cavium: Add driver to support Cavium controllers - cavium: Extend Cavium driver to support Octeon and ThunderX SOCs - bcm2835: Add new driver for Broadcom BCM2835 controller - sdhci-xenon: Add driver to support Marvell Xenon SDHCI controller - sdhci-tegra: Add support for the Tegra186 variant - sdhci-of-esdhc: Support for UHS-I SD cards - sdhci-of-esdhc: Support for eMMC HS200 cards - sdhci-cadence: Add eMMC HS400 enhanced strobe support - sdhci-esdhc-imx: Reset tuning circuit when needed - sdhci-pci: Modernize and clean-up some PM related code - sdhci-pci: Avoid re-tuning at runtime PM for some Intel devices - sdhci-pci|acpi: Use aggressive PM for some Intel BYT controllers - sdhci: Re-factoring and modernizations - sdhci: Optimize delay loops - sdhci: Improve register dump print format - sdhci: Add support for the Command Queue Engine - meson-gx: Various improvements and clean-ups - meson-gx: Add support for CMD23 - meson-gx: Basic tuning support to avoid CRC errors - s3cmci: Enable probing via DT - mediatek: Improve tuning support for eMMC HS200 and HS400 mode - tmio: Improve DMA support - tmio: Use correct response for CMD12 - dw_mmc: Minor improvements and clean-ups" * tag 'mmc-v4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (148 commits) mmc: sdhci-of-esdhc: limit SD clock for ls1012a/ls1046a mmc: sdhci-of-esdhc: poll ESDHC_CLOCK_STABLE bit with udelay mmc: sdhci-xenon: Fix default value of LOGIC_TIMING_ADJUST for eMMC5.0 PHY mmc: sdhci-xenon: Fix the work flow in xenon_remove(). MIPS: Octeon: cavium_octeon_defconfig: Enable Octeon MMC mmc: sdhci-xenon: Remove redundant dev_err call in get_dt_pad_ctrl_data() mmc: cavium: Use module_pci_driver to simplify the code mmc: cavium: Add MMC support for Octeon SOCs. mmc: cavium: Fix detection of block or byte addressing. mmc: core: Export API to allow hosts to get the card address mmc: sdio: Fix sdio wait busy implement limitation mmc: sdhci-esdhc-imx: reset tuning circuit when power on mmc card clk: apn806: fix spelling mistake: "mising" -> "missing" mmc: sdhci-of-esdhc: add delay between tuning cycles mmc: sdhci: Control the delay between tuning commands mmc: sdhci-of-esdhc: add tuning support mmc: sdhci-of-esdhc: add support for signal voltage switch mmc: sdhci-of-esdhc: add peripheral clock support mmc: sdhci-pci: Allow for 3 bytes from Intel DSM mmc: cavium: Fix a shift wrapping bug ...
-
- 02 May, 2017 21 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds authored
Pull networking updates from David Millar: "Here are some highlights from the 2065 networking commits that happened this development cycle: 1) XDP support for IXGBE (John Fastabend) and thunderx (Sunil Kowuri) 2) Add a generic XDP driver, so that anyone can test XDP even if they lack a networking device whose driver has explicit XDP support (me). 3) Sparc64 now has an eBPF JIT too (me) 4) Add a BPF program testing framework via BPF_PROG_TEST_RUN (Alexei Starovoitov) 5) Make netfitler network namespace teardown less expensive (Florian Westphal) 6) Add symmetric hashing support to nft_hash (Laura Garcia Liebana) 7) Implement NAPI and GRO in netvsc driver (Stephen Hemminger) 8) Support TC flower offload statistics in mlxsw (Arkadi Sharshevsky) 9) Multiqueue support in stmmac driver (Joao Pinto) 10) Remove TCP timewait recycling, it never really could possibly work well in the real world and timestamp randomization really zaps any hint of usability this feature had (Soheil Hassas Yeganeh) 11) Support level3 vs level4 ECMP route hashing in ipv4 (Nikolay Aleksandrov) 12) Add socket busy poll support to epoll (Sridhar Samudrala) 13) Netlink extended ACK support (Johannes Berg, Pablo Neira Ayuso, and several others) 14) IPSEC hw offload infrastructure (Steffen Klassert)" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (2065 commits) tipc: refactor function tipc_sk_recv_stream() tipc: refactor function tipc_sk_recvmsg() net: thunderx: Optimize page recycling for XDP net: thunderx: Support for XDP header adjustment net: thunderx: Add support for XDP_TX net: thunderx: Add support for XDP_DROP net: thunderx: Add basic XDP support net: thunderx: Cleanup receive buffer allocation net: thunderx: Optimize CQE_TX handling net: thunderx: Optimize RBDR descriptor handling net: thunderx: Support for page recycling ipx: call ipxitf_put() in ioctl error path net: sched: add helpers to handle extended actions qed*: Fix issues in the ptp filter config implementation. qede: Fix concurrency issue in PTP Tx path processing. stmmac: Add support for SIMATIC IOT2000 platform net: hns: fix ethtool_get_strings overflow in hns driver tcp: fix wraparound issue in tcp_lp bpf, arm64: fix jit branch offset related to ldimm64 bpf, arm64: implement jiting of BPF_XADD ... -
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds authored
Pull crypto updates from Herbert Xu: "Here is the crypto update for 4.12: API: - Add batch registration for acomp/scomp - Change acomp testing to non-unique compressed result - Extend algorithm name limit to 128 bytes - Require setkey before accept(2) in algif_aead Algorithms: - Add support for deflate rfc1950 (zlib) Drivers: - Add accelerated crct10dif for powerpc - Add crc32 in stm32 - Add sha384/sha512 in ccp - Add 3des/gcm(aes) for v5 devices in ccp - Add Queue Interface (QI) backend support in caam - Add new Exynos RNG driver - Add ThunderX ZIP driver - Add driver for hardware random generator on MT7623 SoC" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (101 commits) crypto: stm32 - Fix OF module alias information crypto: algif_aead - Require setkey before accept(2) crypto: scomp - add support for deflate rfc1950 (zlib) crypto: scomp - allow registration of multiple scomps crypto: ccp - Change ISR handler method for a v5 CCP crypto: ccp - Change ISR handler method for a v3 CCP crypto: crypto4xx - rename ce_ring_contol to ce_ring_control crypto: testmgr - Allow ecb(cipher_null) in FIPS mode Revert "crypto: arm64/sha - Add constant operand modifier to ASM_EXPORT" crypto: ccp - Disable interrupts early on unload crypto: ccp - Use only the relevant interrupt bits hwrng: mtk - Add driver for hardware random generator on MT7623 SoC dt-bindings: hwrng: Add Mediatek hardware random generator bindings crypto: crct10dif-vpmsum - Fix missing preempt_disable() crypto: testmgr - replace compression known answer test crypto: acomp - allow registration of multiple acomps hwrng: n2 - Use devm_kcalloc() in n2rng_probe() crypto: chcr - Fix error handling related to 'chcr_alloc_shash' padata: get_next is never NULL crypto: exynos - Add new Exynos RNG driver ...
-
David S. Miller authored
Jon Maloy says: ==================== tipc: refactor socket receive functions We try to make the functions tipc_sk_recvmsg() and tipc_sk_recvstream() more readable. ==================== Signed-off-by:David S. Miller <davem@davemloft.net>
-
Jon Paul Maloy authored
We try to make this function more readable by improving variable names and comments, using more stack variables, and doing some smaller changes to the logics. We also rename the function to make it consistent with naming conventions used elsewhere in the code. Reviewed-by:
Parthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com> Signed-off-by:
Jon Maloy <jon.maloy@ericsson.com> Signed-off-by:
-
Jon Paul Maloy authored
We try to make this function more readable by improving variable names and comments, plus some minor changes to the logics. Reviewed-by:
-
David S. Miller authored
Sunil Goutham says: ==================== net: thunderx: Adds XDP support This patch series adds support for XDP to ThunderX NIC driver which is used on CN88xx, CN81xx and CN83xx platforms. Patches 1-4 are performance improvement and cleanup patches which are done keeping XDP performance bottlenecks in view. Rest of the patches adds actual XDP support. ==================== Signed-off-by: -
Sunil Goutham authored
Driver follows a method of taking one extra reference on the page for recycling which is fine in usual packet path where each 64KB page is segmented into multiple receive buffers. But in XDP mode since there is just one receive buffer per page taking extra page reference itself becomes big bottleneck consuming ~50% of CPU cycles due to atomic operations. This patch adds a internal ref count in pgcache for each page and additional page references are taken in a batch instead of just one at a time. Internal i.e 'pgcache->ref_count' and page's i.e 'page->_refcount' counters are compared to check page's recyclability. Signed-off-by:
Sunil Goutham <sgoutham@cavium.com> Signed-off-by:
-
Sunil Goutham authored
When in XDP mode reserve XDP_PACKET_HEADROOM bytes at the start of receive buffer for XDP program to modify headers and adjust packet start. Additional code changes done to handle such packets. Signed-off-by:
-
Sunil Goutham authored
Adds support for XDP_TX i.e transmits packet out of the XDP TX queue mapped to the corresponding Rx queue on which packet is received. Since SQ for XDP TX will be used only on a single cpu i.e SQ description creation and freeing, using atomic free count is not necessary and will become a bottleneck. Hence added a separate 'xdp_free_cnt' used for SQs designated for XDP to track descriptor free count. Changes also include - A new entry 'xdp_page' is added to save transmitted packet's page pointer for later cleanup. - XDP Tx SQ's doorbell is ringed once per NAPI instance. - Retrieving designated SQ for packets being sent out by stack via 'nicvf_xmit'. Signed-off-by:
-
Sunil Goutham authored
Adds support for XDP_DROP. Also since in XDP mode there is just a single buffer per page, made changes to recycle DMA mapping info as well along with pages. Signed-off-by:
-
Sunil Goutham authored
Adds basic XDP support i.e attaching a BPF program to an interface. Also takes care of allocating separate Tx queues for XDP path and for network stack packet transmission. This patch doesn't support handling of any of the XDP actions, all are treated as XDP_PASS i.e packets will be handed over to the network stack. Changes also involve allocating one receive buffer per page in XDP mode and multiple in normal mode i.e when no BPF program is attached. Signed-off-by:
-
Sunil Goutham authored
Get rid of unnecessary double pointer references and type casting in receive buffer allocation code. Signed-off-by:
-
Sunil Goutham authored
Optimized CQE handling with below changes - Feeing descriptors back to SQ in bulk i.e once per NAPI instance instead for every CQE_TX, this will reduce number of atomic updates to 'sq->free_cnt'. - Checking errors in CQE_TX and CQE_RX before calling appropriate fn()s to update error stats i.e reduce branching. Also removed debug messages in packet handling path which otherwise causes issues if DEBUG is enabled. Signed-off-by:
-
Sunil Goutham authored
Receive buffer's physical address or iova will anyway not go beyond 49bits, since it is the max supported HW address. As per perf, updating bitfields i.e buf_addr:42 in RBDR descriptor entry consumes lots of cpu cycles, hence changed it to a 64bit field with alignment requirements taken care of. Signed-off-by:
-
Sunil Goutham authored
Adds support for page recycling for allocating receive buffers to reduce cost of refilling RBDR ring. Also got rid of using compound pages when pagesize is 4K, only order-0 pages now. Only page is recycled, DMA mappings still needs to be done for every receive buffer allocated due to following constraints - Cannot have just one receive buffer per 64KB page. - There is just one buffer ring shared across 8 Rx queues, so buffers of same page can go to any Rx queue. - HW gives buffer address where packet has been DMA'ed and not the index into buffer ring. This makes it not possible to resue DMA mapping info. So unfortunately have to go through costly mapping route for every buffer. Signed-off-by:
-
Dan Carpenter authored
We should call ipxitf_put() if the copy_to_user() fails. Reported-by:
李强 <liqiang6-s@360.cn> Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Jiri Pirko authored
Jump is now the only one using value action opcode. This is going to change soon. So introduce helpers to work with this. Convert TC_ACT_JUMP. This also fixes the TC_ACT_JUMP check, which is incorrectly done as a bit check, not a value check. Fixes: e0ee84de ("net sched actions: Complete the JUMPX opcode") Signed-off-by:
Jiri Pirko <jiri@mellanox.com> Acked-by:
Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by:
-
David S. Miller authored
Sudarsana Reddy Kalluru says: ==================== qed*: PTP bug fixes. The series addresses couple of issues in the PTP implementation. ==================== Signed-off-by: -
sudarsana.kalluru@cavium.com authored
PTP hardware filter configuration performed by the driver for a given user requested config is not correct for some of the PTP modes. Following changes are needed for PTP config-filter implementation. 1. NIG_REG_TX_PTP_EN register - Bits 0/1/2 respectively enables TimeSync/"V1 frame format support"/"V2 frame format support" on the TX side. Set the associated bits based on the user request. 2. ptp4l application fails to operate in Peer Delay mode. Following changes are needed to fix this, a. Driver should enable (set to 0) DA #1-related bits for IPv4, IPv6 and MAC destination addresses in these registers: NIG_REG_TX_LLH_PTP_RULE_MASK NIG_REG_LLH_PTP_RULE_MASK b. NIG_REG_LLH_PTP_PARAM_MASK/NIG_REG_TX_LLH_PTP_PARAM_MASK should be set to 0x0 in all modes. Signed-off-by:Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by:
Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by:
-
sudarsana.kalluru@cavium.com authored
PTP Tx timestamping data structures are not protected against the concurrent access in the Tx paths. Protecting the same using atomic bit locks. Signed-off-by:
-
Jan Kiszka authored
The IOT2000 is industrial controller platform, derived from the Intel Galileo Gen2 board. The variant IOT2020 comes with one LAN port, the IOT2040 has two of them. They can be told apart based on the board asset tag in the DMI table. Based on patch by Sascha Weisenberger. Signed-off-by:
Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by:
Sascha Weisenberger <sascha.weisenberger@siemens.com> Reviewed-by:
Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by:
-
