- 27 Aug, 2010 2 commits
-
-
Andreas Gruenbacher authored
The appropriate error code when privileged operations are denied is EPERM, not EACCES. Signed-off-by: Andreas Gruenbacher <agruen@suse.de> Signed-off-by: Eric Paris <paris@paris.rdu.redhat.com>
-
Tvrtko Ursulin authored
resize pid and reorder the fanotify_event_metadata so it is naturally aligned and we can work towards dropping the packed attributed Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@sophos.com> Cc: Andreas Dilger <adilger@dilger.ca> Signed-off-by: Eric Paris <eparis@redhat.com>
-
- 23 Aug, 2010 6 commits
-
-
Tvrtko Ursulin authored
This reminded me... you have two pr_debugs in fanotify_should_send_event which output redundant information. Maybe you intended it like that so it is selectable how much log spam you want, or if not you may want to apply this patch. Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@sophos.com> Signed-off-by: Eric Paris <eparis@redhat.com>
-
Eric Paris authored
When an fanotify listener is closing it may cause a deadlock between the listener and the original task doing an fs operation. If the original task is waiting for a permissions response it will be holding the srcu lock. The listener cannot clean up and exit until after that srcu lock is syncronized. Thus deadlock. The fix introduced here is to stop accepting new permissions events when a listener is shutting down and to grant permission for all outstanding events. Thus the original task will eventually release the srcu lock and the listener can complete shutdown. Reported-by: Andreas Gruenbacher <agruen@suse.de> Cc: Andreas Gruenbacher <agruen@suse.de> Signed-off-by: Eric Paris <eparis@redhat.com>
-
Eric Paris authored
The interesting 2 list lockstep walking didn't quite work out if the inode marks only had ignores and the vfsmount list requested events. The code to shortcut list traversal would not run the inode list since it didn't have real event requests. This code forces inode list traversal when a vfsmount mark matches the event type. Maybe we could add an i_fsnotify_ignored_mask field to struct inode to get the shortcut back, but it doesn't seem worth it to grow struct inode again. I bet with the recent changes to lock the way we do now it would actually not be a major perf hit to just drop i_fsnotify_mark_mask altogether. But that is for another day. Signed-off-by: Eric Paris <eparis@redhat.com>
-
Eric Paris authored
add myself as the maintainer. Reported-by: Andy Gospodarek <gospo@redhat.com> Signed-off-by: Eric Paris <eparis@redhat.com
-
Eric Paris authored
The fsnotify main loop has 2 booleans which tell if a particular mark was sent to the listeners or if it should be processed in the next pass. The problem is that the booleans were not reset on each traversal of the loop. So marks could get skipped even when they were not sent to the notifiers. Reported-by: Tvrtko Ursulin <tvrtko.ursulin@sophos.com> Signed-off-by: Eric Paris <eparis@redhat.com>
-
Eric Paris authored
The fanotify code is supposed to get the group from the mark. It accidentally only used the inode_mark. If the vfsmount_mark was set but not the inode_mark it would deref the NULL inode_mark. Get the group from the correct place. Reported-by: Tvrtko Ursulin <tvrtko.ursulin@sophos.com> Signed-off-by: Eric Paris <eparis@redhat.com>
-
- 22 Aug, 2010 12 commits
-
-
git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds authored
* 'kvm-updates/2.6.36' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: PIT: free irq source id in handling error path KVM: destroy workqueue on kvm_create_pit() failures KVM: fix poison overwritten caused by using wrong xstate size
-
git://git.kernel.org/pub/scm/linux/kernel/git/anholt/drm-intelLinus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/anholt/drm-intel: (58 commits) drm/i915,intel_agp: Add support for Sandybridge D0 drm/i915: fix render pipe control notify on sandybridge agp/intel: set 40-bit dma mask on Sandybridge drm/i915: Remove the conflicting BUG_ON() drm/i915/suspend: s/IS_IRONLAKE/HAS_PCH_SPLIT/ drm/i915/suspend: Flush register writes before busy-waiting. i915: disable DAC on Ironlake also when doing CRT load detection. drm/i915: wait for actual vblank, not just 20ms drm/i915: make sure eDP PLL is enabled at the right time drm/i915: fix VGA plane disable for Ironlake+ drm/i915: eDP mode set sequence corrections drm/i915: add panel reset workaround drm/i915: Enable RC6 on Ironlake. drm/i915/sdvo: Only set is_lvds if we have a valid fixed mode. drm/i915: Set up a render context on Ironlake drm/i915 invalidate indirect state pointers at end of ring exec drm/i915: Wake-up wait_request() from elapsed hang-check (v2) drm/i915: Apply i830 errata for cursor alignment drm/i915: Only update i845/i865 CURBASE when disabled (v2) drm/i915: FBC is updated within set_base() so remove second call in mode_set() ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/penberg/slab-2.6Linus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/penberg/slab-2.6: slab: fix object alignment slub: add missing __percpu markup in mm/slub_def.h
-
git://git.kernel.org/pub/scm/linux/kernel/git/ryusuke/nilfs2Linus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ryusuke/nilfs2: nilfs2: wait for discard to finish
-
Zhenyu Wang authored
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by: Eric Anholt <eric@anholt.net>
-
Zhenyu Wang authored
This one is missed in last pipe control fix for sandybridge, that really unmask interrupt bit for notify in render engine IMR. Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by: Eric Anholt <eric@anholt.net>
-
Zhenyu Wang authored
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by: Eric Anholt <eric@anholt.net>
-
Chris Wilson authored
We now attempt to free "active" objects following a GPU hang as either the GPU will be reset or the hang is permenant. In either case, the GPU writes will not be flushed to main memory and it should be safe to return that memory back to the system. The BUG_ON(active) is thus overkill and can erroneously fire after a EIO. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Eric Anholt <eric@anholt.net>
-
Chris Wilson authored
For the shared paths on the next generation chipsets. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Eric Anholt <eric@anholt.net>
-
Chris Wilson authored
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Eric Anholt <eric@anholt.net>
-
Dave Airlie authored
Like on Sandybridge, disabling the DAC here when doing CRT load detect avoids forever hangs waiting on the hardware. test procedure on HP 2740p: boot with no VGA plugged in, start X, plug in VGA monitor (1280x1024) chvt 3 machine hangs waiting forever. Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Eric Anholt <eric@anholt.net>
-
Jesse Barnes authored
Waiting for a hard coded 20ms isn't always enough to make sure a vblank period has actually occurred, so add code to make sure we really have passed through a vblank period (or that the pipe is off when disabling). This prevents problems with mode setting and link training, and seems to fix a bug like https://bugs.freedesktop.org/show_bug.cgi?id=29278, but on an HP 8440p instead. Hopefully also fixes https://bugs.freedesktop.org/show_bug.cgi?id=29141. Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Eric Anholt <eric@anholt.net>
-
- 21 Aug, 2010 6 commits
-
-
Arjan van de Ven authored
With the introduction of the new unified work queue thread pools, we lost one feature: It's no longer possible to know which worker is causing the CPU to wake out of idle. The result is that PowerTOP now reports a lot of "kworker/a:b" instead of more readable results. This patch adds a pair of tracepoints to the new workqueue code, similar in style to the timer/hrtimer tracepoints. With this pair of tracepoints, the next PowerTOP can correctly report which work item caused the wakeup (and how long it took): Interrupt (43) i915 time 3.51ms wakeups 141 Work ieee80211_iface_work time 0.81ms wakeups 29 Work do_dbs_timer time 0.55ms wakeups 24 Process Xorg time 21.36ms wakeups 4 Timer sched_rt_period_timer time 0.01ms wakeups 1 Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.infradead.org/mtd-2.6Linus Torvalds authored
* git://git.infradead.org/mtd-2.6: mtd: nand: Fix probe of Samsung NAND chips mtd: nand: Fix regression in BBM detection pxa3xx: fix ns2cycle equation
-
Samuel Thibault authored
The "Configure" word tends to make user believe they have to say 'yes' to be able to choose the number of procs/nodes. "Enable" should be unambiguous enough. Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Linus Torvalds authored
Like the mlock() change previously, this makes the stack guard check code use vma->vm_prev to see what the mapping below the current stack is, rather than have to look it up with find_vma(). Also, accept an abutting stack segment, since that happens naturally if you split the stack with mlock or mprotect. Tested-by: Ian Campbell <ijc@hellion.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Linus Torvalds authored
If we've split the stack vma, only the lowest one has the guard page. Now that we have a doubly linked list of vma's, checking this is trivial. Tested-by: Ian Campbell <ijc@hellion.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Linus Torvalds authored
It's a really simple list, and several of the users want to go backwards in it to find the previous vma. So rather than have to look up the previous entry with 'find_vma_prev()' or something similar, just make it doubly linked instead. Tested-by: Ian Campbell <ijc@hellion.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
- 20 Aug, 2010 14 commits
-
-
Tilman Sauerbeck authored
Apparently, the check for a 6-byte ID string introduced by commit 426c457a ("mtd: nand: extend NAND flash detection to new MLC chips") is NOT sufficient to determine whether or not a Samsung chip uses their new MLC detection scheme or the old, standard scheme. This adds a condition to check cell type. Signed-off-by: Tilman Sauerbeck <tilman@code-monkey.de> Signed-off-by: Brian Norris <norris@broadcom.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Cc: stable@kernel.org
-
Linus Torvalds authored
Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86, apic: Fix apic=debug boot crash x86, hotplug: Serialize CPU hotplug to avoid bringup concurrency issues x86-32: Fix dummy trampoline-related inline stubs x86-32: Separate 1:1 pagetables from swapper_pg_dir x86, cpu: Fix regression in AMD errata checking code
-
Stephen Rothwell authored
This list moved to lists.ozlabs.org quite some time ago. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Stephen Rothwell authored
All these lists moved to lists.ozlabs.org quite a while ago. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Stefan Richter authored
Chapter 6 is right about mutex_trylock, but chapter 10 wasn't. This error was introduced during semaphore-to-mutex conversion of the Unreliable guide. :-) If user context which performs mutex_lock() or mutex_trylock() is preempted by interrupt context which performs mutex_trylock() on the same mutex instance, a deadlock occurs. This is because these functions do not disable local IRQs when they operate on mutex->wait_lock. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Acked-by: Rusty Russell <rusty@rustcorp.com.au> Cc: Matthew Wilcox <matthew@wil.cx> Cc: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Andrew Morton authored
gcc-4.0.2: drivers/scsi/qla4xxx/ql4_os.c: In function 'qla4_8xxx_error_recovery': drivers/scsi/qla4xxx/ql4_glbl.h:135: sorry, unimplemented: inlining failed in call to 'qla4_8xxx_set_drv_active': function body not available drivers/scsi/qla4xxx/ql4_os.c:2377: sorry, unimplemented: called from here drivers/scsi/qla4xxx/ql4_glbl.h:135: sorry, unimplemented: inlining failed in call to 'qla4_8xxx_set_drv_active': function body not available drivers/scsi/qla4xxx/ql4_os.c:2393: sorry, unimplemented: called from here Cc: Ravi Anand <ravi.anand@qlogic.com> Cc: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Miklos Szeredi authored
Fix uml compile error: include/linux/dma-mapping.h:145: error: redefinition of 'dma_get_cache_alignment' arch/um/include/asm/dma-mapping.h:99: note: previous definition of 'dma_get_cache_alignment' was here Introduced by commit 4565f017 ("dma-mapping: unify dma_get_cache_alignment implementations") Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Cc: Jeff Dike <jdike@addtoit.com> Cc: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
KOSAKI Motohiro authored
dump_tasks() needs to hold the RCU read lock around its access of the target task's UID. To this end it should use task_uid() as it only needs that one thing from the creds. The fact that dump_tasks() holds tasklist_lock is insufficient to prevent the target process replacing its credentials on another CPU. Then, this patch change to call rcu_read_lock() explicitly. =================================================== [ INFO: suspicious rcu_dereference_check() usage. ] --------------------------------------------------- mm/oom_kill.c:410 invoked rcu_dereference_check() without protection! other info that might help us debug this: rcu_scheduler_active = 1, debug_locks = 1 4 locks held by kworker/1:2/651: #0: (events){+.+.+.}, at: [<ffffffff8106aae7>] process_one_work+0x137/0x4a0 #1: (moom_work){+.+...}, at: [<ffffffff8106aae7>] process_one_work+0x137/0x4a0 #2: (tasklist_lock){.+.+..}, at: [<ffffffff810fafd4>] out_of_memory+0x164/0x3f0 #3: (&(&p->alloc_lock)->rlock){+.+...}, at: [<ffffffff810fa48e>] find_lock_task_mm+0x2e/0x70 Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Acked-by: David Rientjes <rientjes@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
KOSAKI Motohiro authored
Commit 0aad4b31 ("oom: fold __out_of_memory into out_of_memory") introduced a tasklist_lock leak. Then it caused following obvious danger warnings and panic. ================================================ [ BUG: lock held when returning to user space! ] ------------------------------------------------ rsyslogd/1422 is leaving the kernel with locks still held! 1 lock held by rsyslogd/1422: #0: (tasklist_lock){.+.+.+}, at: [<ffffffff810faf64>] out_of_memory+0x164/0x3f0 BUG: scheduling while atomic: rsyslogd/1422/0x00000002 INFO: lockdep is turned off. This patch fixes it. Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Reviewed-by: Minchan Kim <minchan.kim@gmail.com> Acked-by: David Rientjes <rientjes@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
KOSAKI Motohiro authored
Commit b940fd70 ("oom: remove unnecessary code and cleanup") added an unnecessary NULL pointer dereference. remove it. Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Reviewed-by: Minchan Kim <minchan.kim@gmail.com> Acked-by: David Rientjes <rientjes@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Kyungmin Park authored
There's some merge problem between sdhic core and sdhci-s3c host. After mutex is changed to spinlock. It needs to use use spin lock functions and use the correct card detection function. Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Cc: <linux-mmc@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Kyungmin Park authored
Some SDHCI controllers like s5pc110 don't have an HISPD bit in the HOSTCTL register. Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Cc: <linux-mmc@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Kyungmin Park authored
s5pc110 (aka s5pv210) uses the same SDHCI IP. Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Cc: <linux-mmc@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Kyungmin Park authored
Each board can override the default sdhci host capabilities. Some board has broken features by hardwares and support 8-bit bandwidth. Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Cc: <linux-mmc@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-