- 24 Oct, 2019 40 commits
-
-
Jernej Skrabec authored
Allwinner H3 SoC contains deinterlace unit, which has several modes of operation - bypass, weave, bob and mixed (advanced) mode. I don't know how mixed mode works, but according to Allwinner it gives best results, so they use it exclusively. Currently this mode is also hardcoded here. For each interleaved frame queued, this driver produces 2 deinterlaced frames. Deinterlaced frames are based on 2 consequtive output buffers, except for the first 2, where same output buffer is given to peripheral as current and previous. There is no documentation for this core, so register layout and fixed values were taken from BSP driver. I'm not sure if maximum size of the image unit is capable to process is governed by size of "flag" buffers, frequency or it really is some HW limitation. Currently driver can process full HD image in ~15ms (7.5ms for each capture buffer), which allows to process 1920x1080@60i video smoothly in real time. Acked-by:
Maxime Ripard <mripard@kernel.org> Signed-off-by:
Jernej Skrabec <jernej.skrabec@siol.net> [hverkuil-cisco@xs4all.nl: add static to deinterlace_ioctl_ops] Signed-off-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by:
Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
-
Jernej Skrabec authored
Allwinner H3 Deinterlace core is used for deinterlacing interlaced video content. Core can also be found on some later SoCs, like H5 and R40. Acked-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Arthur Moraes do Lago authored
Add mean window size parameter for debayer filter as a control in vimc-debayer. vimc-debayer was patched to allow changing mean window parameter of the filter without needing to reload the driver. The parameter can now be set using a v4l2-ctl control(mean_window_size). Co-developed-by:
Laís Pessine do Carmo <laispc19@gmail.com> Signed-off-by:
Arthur Moraes do Lago <arthurmoraeslago@gmail.com> Acked-by:
Helen Koike <helen.koike@collabora.com> Signed-off-by:
-
Dafna Hirschfeld authored
Since the 'struct device *dev' field exists in each of the entity structs, it can be moved to the common struct vimc_ent_devevice. It is then used to replace 'pr_err' with 'dev_err' in the streamer code. Signed-off-by:
Dafna Hirschfeld <dafna.hirschfeld@collabora.com> Signed-off-by:
-
Dafna Hirschfeld authored
since the pads array is of known small size, there is no reason to allocate it separately. Instead, it is embedded in the entity struct. This also conforms to the media controller doc: 'Most drivers will embed the pads array in a driver-specific structure, avoiding dynamic allocation.' Signed-off-by:
-
Dafna Hirschfeld authored
the struct vimc_platform_data is not used anymore and can be removed. Signed-off-by:
-
Dafna Hirschfeld authored
The function 'vimc_pipeline_s_stream' is not used and can be removed. Signed-off-by:
-
Dafna Hirschfeld authored
vimc is a single kernel module and does not need to export any symbols therefore there is no need for these declarations. Signed-off-by:
-
Dafna Hirschfeld authored
since this function only calls v4l2_device_unregister_subdev, it is pointless. Signed-off-by:
-
Dafna Hirschfeld authored
according to the docs, this function must be called during the cleanup phase after unregistering the entity. Signed-off-by:
-
Dafna Hirschfeld authored
vimc_sen_add function first registers the subdevice and then calls tpg_alloc. If tpg_alloc fails it unregisters the subdevice and then frees vsen, this cause double free since the release callback that follows subdevice unregistration also frees vsen. Signed-off-by:
-
Dafna Hirschfeld authored
Since the add callback returns NULL on failure and the array is initialized to NULLs, there is no need for the intermediate assignment to local var. Signed-off-by:
-
Dafna Hirschfeld authored
since NULL value for vimc entity pointer indicates that entity creation failed and this is tested, the pointers should be initialized to NULL. Signed-off-by:
-
Sean Young authored
The touch timer is set up in intf1. If the second interface does not exist, the timer and touch input device are not setup and we get the following error, when touch events are reported via intf0. kernel BUG at kernel/time/timer.c:956! invalid opcode: 0000 [#1] SMP KASAN CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.4.0-rc1+ #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:__mod_timer kernel/time/timer.c:956 [inline] RIP: 0010:__mod_timer kernel/time/timer.c:949 [inline] RIP: 0010:mod_timer+0x5a2/0xb50 kernel/time/timer.c:1100 Code: 45 10 c7 44 24 14 ff ff ff ff 48 89 44 24 08 48 8d 45 20 48 c7 44 24 18 00 00 00 00 48 89 04 24 e9 5a fc ff ff e8 ae ce 0e 00 <0f> 0b e8 a7 ce 0e 00 4c 89 74 24 20 e9 37 fe ff ff e8 98 ce 0e 00 RSP: 0018:ffff8881db209930 EFLAGS: 00010006 RAX: ffffffff86c2b200 RBX: 00000000ffffa688 RCX: ffffffff83efc583 RDX: 0000000000000100 RSI: ffffffff812f4d82 RDI: ffff8881d2356200 RBP: ffff8881d23561e8 R08: ffffffff86c2b200 R09: ffffed103a46abeb R10: ffffed103a46abea R11: ffff8881d2355f53 R12: dffffc0000000000 R13: 1ffff1103b64132d R14: ffff8881d2355f50 R15: 0000000000000006 FS: 0000000000000000(0000) GS:ffff8881db200000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f75e2799000 CR3: 00000001d3b07000 CR4: 00000000001406f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <IRQ> imon_touch_event drivers/media/rc/imon.c:1348 [inline] imon_incoming_packet.isra.0+0x2546/0x2f10 drivers/media/rc/imon.c:1603 usb_rx_callback_intf0+0x151/0x1e0 drivers/media/rc/imon.c:1734 __usb_hcd_giveback_urb+0x1f2/0x470 drivers/usb/core/hcd.c:1654 usb_hcd_giveback_urb+0x368/0x420 drivers/usb/core/hcd.c:1719 dummy_timer+0x120f/0x2fa2 drivers/usb/gadget/udc/dummy_hcd.c:1965 call_timer_fn+0x179/0x650 kernel/time/timer.c:1404 expire_timers kernel/time/timer.c:1449 [inline] __run_timers kernel/time/timer.c:1773 [inline] __run_timers kernel/time/timer.c:1740 [inline] run_timer_softirq+0x5e3/0x1490 kernel/time/timer.c:1786 __do_softirq+0x221/0x912 kernel/softirq.c:292 invoke_softirq kernel/softirq.c:373 [inline] irq_exit+0x178/0x1a0 kernel/softirq.c:413 exiting_irq arch/x86/include/asm/apic.h:536 [inline] smp_apic_timer_interrupt+0x12f/0x500 arch/x86/kernel/apic/apic.c:1137 apic_timer_interrupt+0xf/0x20 arch/x86/entry/entry_64.S:830 </IRQ> RIP: 0010:default_idle+0x28/0x2e0 arch/x86/kernel/process.c:581 Code: 90 90 41 56 41 55 65 44 8b 2d 44 3a 8f 7a 41 54 55 53 0f 1f 44 00 00 e8 36 ee d0 fb e9 07 00 00 00 0f 00 2d fa dd 4f 00 fb f4 <65> 44 8b 2d 20 3a 8f 7a 0f 1f 44 00 00 5b 5d 41 5c 41 5d 41 5e c3 RSP: 0018:ffffffff86c07da8 EFLAGS: 00000246 ORIG_RAX: ffffffffffffff13 RAX: 0000000000000007 RBX: ffffffff86c2b200 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000006 RDI: ffffffff86c2ba4c RBP: fffffbfff0d85640 R08: ffffffff86c2b200 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 cpuidle_idle_call kernel/sched/idle.c:154 [inline] do_idle+0x3b6/0x500 kernel/sched/idle.c:263 cpu_startup_entry+0x14/0x20 kernel/sched/idle.c:355 start_kernel+0x82a/0x864 init/main.c:784 secondary_startup_64+0xa4/0xb0 arch/x86/kernel/head_64.S:241 Modules linked in: Reported-by: syzbot+f49d12d34f2321cf4df2@syzkaller.appspotmail.com Signed-off-by:
Sean Young <sean@mess.org> Signed-off-by:
-
Nishad Kamdar authored
This patch corrects the SPDX License Identifier style in header file related to media Drivers for Analog TV Tuners. For C header files Documentation/process/license-rules.rst mandates C-like comments (opposed to C source files where C++ style should be used) Changes made by using a script provided by Joe Perches here: https://lkml.org/lkml/2019/2/7/46. Suggested-by:
Joe Perches <joe@perches.com> Signed-off-by:
Nishad Kamdar <nishadkamdar@gmail.com> Signed-off-by:
-
Sakari Ailus authored
Rename the confusingly named smiapp_update_mode() function as smiapp_pll_blanking_update(). The function is used to calculate new PLL and blanking configuration after binning or scaling configuration has been changed. Signed-off-by:
Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by:
-
Sakari Ailus authored
Earlier it was possible that the parts of the driver that assumed runtime PM was enabled were being called before runtime PM was enabled in the driver's probe function. So enable runtime PM before registering the sub-device. Signed-off-by:
-
Sakari Ailus authored
Use non-binned limits when binning is disabled and binned when they're enabled. Signed-off-by:
-
Sakari Ailus authored
The sensor configuration since it was previously powered off was not changed, so no need to update the PLL configuration etc. What is necessary though is to re-apply the configuration to the sensor's registers. Signed-off-by:
-
Sakari Ailus authored
Only write the binning configuration at stream start. It has no effect otherwise. Signed-off-by:
-
Sakari Ailus authored
The driver implementation assumed the binning limits could change dynamically based on the binning configuration. This is not actually the case; these limits are static and suitable to be used with all binning configurations but possibly not optimal limit for many of those configurations. Signed-off-by:
-
Sakari Ailus authored
Destroy the mutex initialised by the driver in probe. Signed-off-by:
-
Sakari Ailus authored
The nokia,nvm-size property was used to tell the size of the NVM memory accessible through the sensor's register interface. However, while the size isn't directly readable through the sensor's register interface, it can be detected reading the NVM memory until the selected page is no longer available. Thus remove this property. Signed-off-by:
-
Sakari Ailus authored
The interface supports probing for the NVM size but this was not implemented in the driver. Do that now. This will also make nokia,nvm-size property redundant. Signed-off-by:
-
Sakari Ailus authored
Only some devices require polling for NVM ready. Do the polling only on devices that need it. Signed-off-by:
-
Sakari Ailus authored
The data transfer capability register was defined but its bits were not. Do that now. Signed-off-by:
-
Sakari Ailus authored
Split out reading a single NVM page into a separate function. Signed-off-by:
-
Sakari Ailus authored
If NVM reading failed, the device was left powered on. Fix that. Signed-off-by:
-
Sakari Ailus authored
The BIT macro is a better way to define register bits, for 1 << bit is risky for 32-bit registers. Also remove the definition of SMIAPP_DATA_TRANSFER_IF_1_CTRL_RD_EN which has a value of zero. Signed-off-by:
-
Chuhong Yuan authored
devm_regulator_get may return an error but mipi_csis_phy_init misses a check for it. This may lead to problems when regulator_set_voltage uses the unchecked pointer. This patch adds a check for devm_regulator_get to avoid potential risk. Signed-off-by:
Chuhong Yuan <hslester96@gmail.com> Reviewed-by:
Rui Miguel Silva <rmfrfs@gmail.com> Signed-off-by:
-
Chuhong Yuan authored
mipid02_probe misses a check for devm_gpiod_get_optional and may miss the failure. Add a check to fix the problem. Signed-off-by:
-
Manivannan Sadhasivam authored
Add driver for Sony IMX290 CMOS image sensor driver. The driver only supports I2C interface for programming and MIPI CSI-2 for sensor output. [Sakari Ailus: Rewrapped a few lines over 80 chars a little.] Signed-off-by:
Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by:
-
Manivannan Sadhasivam authored
Add devicetree binding for IMX290 CMOS image sensor. Let's also add MAINTAINERS entry for the binding and driver. Signed-off-by:
-
YueHaibing authored
If VIDEO_OV5695 is y and V4L2_FWNODE is m, building fails: drivers/media/i2c/ov5695.o: In function `ov5695_probe': ov5695.c:(.text+0xf4c): undefined reference to `v4l2_async_register_subdev_sensor_common' Select V4L2_FWNODE like OV5675 does. Fixes: 623df5d7 ("media: i2c: ov5695: Modify the function of async register subdev related devices") Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Signed-off-by:
-
Ricardo Ribalda Delgado authored
According to the datasheet, both AD5821 and AD5820 share a compatible register-set: http://www.analog.com/media/en/technical-documentation/data-sheets/AD5821.pdf Some camera modules also refer that AD5823 is a replacement of AD5820: https://download.kamami.com/p564094-OV8865_DS.pdfSuggested-by:
Pavel Machek <pavel@ucw.cz> Signed-off-by:
Ricardo Ribalda Delgado <ribalda@kernel.org> Acked-by:
-
Ricardo Ribalda Delgado authored
Document new compatible devices. Cc: devicetree@vger.kernel.org Signed-off-by:
-
Ricardo Ribalda Delgado authored
Since kernel 4.16, i2c devices with DT compatible tag are modprobed using their DT modalias. Without this patch, if this driver is build as module it would never be autoprobed. There is no need to mask it with CONFIG_OF to allow ACPI loading, this also builds find with CONFIG_OF=n. Signed-off-by:
-
Ricardo Ribalda Delgado authored
This patch adds support for a programmable enable pin. It can be used in situations where the ANA-vcc is not configurable (dummy-regulator), or just to have a more fine control of the power saving. The use of the enable pin is optional. Signed-off-by:
-
Ricardo Ribalda Delgado authored
Document new enable-gpio field. It can be used to disable the part without turning down its regulator. Cc: devicetree@vger.kernel.org Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by:
-
Ricardo Ribalda Delgado authored
Without this patch, media_device_register_entity throws a warning: dev_warn(mdev->dev, "Entity type for entity %s was not initialized!\n", entity->name); Signed-off-by:
-
