- 03 Dec, 2006 6 commits
-
-
James Smart authored
It was not accounted for in the fast/slow rings. Genericize the implementation and control it via sysfs Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
-
James Smart authored
Discovery Fixes: - Prevent starting discovery of a node if discovery is in progress. - Code improvement (reduction) for lpfc_findnode_did(). - Update discovery to send RFF to Fabric on link up - Bypass unique WWN checks for fabric addresses - Add ndlp to plogi list prior to issuing the plogi els command Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
-
FUJITA Tomonori authored
This is IBM Virtual SCSI target driver for tgt. The driver is based on the original ibmvscsis driver: http://lkml.org/lkml/2005/10/17/99Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: Santiago Leon <santil@us.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
-
FUJITA Tomonori authored
libsrp provides helper functions for SRP target drivers. Some SRP target drivers would be out of drivers/scsi/ so we added an entry for libsrp in drivers/scsi/Kconfig. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: Santiago Leon <santil@us.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
-
James Bottomley authored
In the switch over, I forgot to set the command length, so it sends out a request sense with whatever length the prior command had (and fails badly if it wasn't 6). Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
-
Randy Dunlap authored
Use NULL instead of 0 for pointers (sparse warning): drivers/scsi/qla2xxx/qla_attr.c:393:4: warning: Using plain integer as NULL pointer Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Acked-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
-
- 25 Nov, 2006 5 commits
-
-
FUJITA Tomonori authored
Makefile and Kconfig for tgt. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
-
FUJITA Tomonori authored
The user-space daemon and tgt kernel module need bi-directional kernel/user high-performance interface, however, mainline provides no standard interface like that. This patch adds shared memory interface between kernel and user spaces like some other drivers do by using own character device. The user-space daemon and tgt kernel module creates shared memory via mmap and use it like ring buffer. poll (kernel to user) and write (user to kernel) system calls are used for notification. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
-
FUJITA Tomonori authored
The core scsi target lib functions. TODO: - mv md/dm-bio-list.h to linux/bio-list.h so md and us do not have to do that weird include. - convert scsi_tgt_cmd's work struct to James's execute code. And try to kill our scsi_tgt_cmd. - add host state checking. We do refcouting so hotplug is partially supported, but we need to add state checking to make it easier on the LLD. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
-
FUJITA Tomonori authored
This patch contains the needed changes to the scsi-ml for the target mode support. Note, per the last review we moved almost all the fields we added to the scsi_cmnd to our internal data structure which we are going to try and kill off when we can replace it with support from other parts of the kernel. The one field we left on was the offset variable. This is needed to handle the case where the target gets request that is so large that it cannot execute it in one dma operation. So max_secotors or a segment limit may limit the size of the transfer. In this case our tgt core code will break up the command into managable transfers and send them to the LLD one at a time. The offset is then used to tell the LLD where in the command we are at. Is there another field on the scsi_cmd for that? Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
-
Randy Dunlap authored
WARNING: drivers/scsi/initio.o - Section mismatch: reference to .init.data: from .text between 'i91u_detect' (at offset 0x26e8) and 'i91uSCBPost' WARNING: drivers/scsi/initio.o - Section mismatch: reference to .init.data:i91u_pci_devices from .text between 'i91u_detect' (at offset 0x26ef) and 'i91uSCBPost' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
-
- 22 Nov, 2006 29 commits
-
-
Andrew Vasquez authored
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
-
Andrew Vasquez authored
Modify intialization semantics: - perform basic hardware configuration only (as usual) - allocate resources - load and execute firmware - defer link (transport) negotiations to the DPC thread - again the code in qla2x00_initialize_adapter() to stall probe() completion was needed for legacy-style scanning. - DPC thread stalls until probe() complete. - before probe() completes, set DPC flags to perform loop-resync logic (similar to what's done during cable-insertion/removal). Benefits: user does not have to wait 20+ seconds in case the FC cable is unplugged during driver load, code consolidation (removal of redundant link negotiation logic during initialize_adaoter()), and finilly, the driver no longer needs to defer the fc_remote_port_add() calls to hold off lun-scanning prior to returning from the probe() function. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
-
Matthew Wilcox authored
If a driver can find its own targets, it can now fill in scan_finished and (optionally) scan_start in the scsi_host_template. Then, when it calls scsi_scan_host(), it will be called back (from a thread if asynchronous discovery is enabled), first to start the scan, and then at intervals to check if the scan is completed. Also make scsi_prep_async_scan and scsi_finish_async_scan static. Signed-off-by: Matthew Wilcox <matthew@wil.cx> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
-
Matthew Wilcox authored
Drivers that called scsi_scan_target() instead of scsi_scan_host() were still adding devices; this needs to be under the control of userspace, not the driver. Signed-off-by: Matthew Wilcox <matthew@wil.cx> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
-
Matthew Wilcox authored
Without this patch, the user has to add a kernel command line parameter to get asynchronous SCSI scanning. Now they can select the default at compile time and still override it at boot time if they need to. Signed-off-by: Matthew Wilcox <matthew@wil.cx> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
-
Mark Haverkamp authored
Received from Mark Salyzyn: Version patch, update to reflect a rough estimate of the Adaptec build (2423) that coincides with the sources on kernel.org. Signed-off-by: Mark Haverkamp <markh@osdl.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
-
Mark Haverkamp authored
Received from Mark Salyzyn: Add code to abort outstanding management ioctl fibs when the blinkLED recovery is performed. This code is 'clunky' and does not have any real feedback in that the reset could progress before the user application has gotten it's notification of command completion. We put a schedule() call to delay just the right amount for most cases, because we tried a spin and still managed to find cases where we would spin forever waiting for the management application to acknowledge the impending doom surrounding the cause of the BlinkLED. Will cause an oops in the context of the management application if we proceed too quickly. I view this as the lesser of many evils since currently if there are outstanding management ioctls during a need to reset/recover the adapter, the management application just locks up and waits forever. The best practices fix for this problem not going to be simple or easy (at least the fixes I imagine today); and we found a balance between the needs of the driver to proceed, and the applications that locked or confused that would hold back the driver. I just do not like the idea of a kernel oops in an application to deal with low priority, sluggish or misbehaving applications. Signed-off-by: Mark Haverkamp <markh@osdl.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
-
Mark Haverkamp authored
Received from Mark Salyzyn: Blinkled at startup is useful for catching Adapters in a lot of pain, in a BlinkLED assert, quickly; rather than waiting several minutes for commands to timeout. Signed-off-by: Mark Haverkamp <markh@osdl.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
-
Brian King authored
Bump driver version. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
-
Adrian Bunk authored
This patch makes ipr_ioctl static. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Brian King <brking@us.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
-
Brian King authored
Since the default error log size has increased on SAS adapters, prevent ipr from logging this additional data unless requested to do so by the user set log level in order to prevent flooding the logs. Signed-off-by: Brian King <brking@us.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
-
Brian King authored
Adds support for logging SAS fabric errors logged by the ipr firmware. Signed-off-by: Brian King <brking@us.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
-
Brian King authored
Remove some debug trace points that clutter up the log when ipr debugging is turned on. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
-
Brian King authored
Remove ipr's usage of the scsi transport eh_timed_out for handling SATA timeouts. This was only needed in order to set some flags on the qc prior to calling ata_do_eh. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
-
Brian King authored
Both SCSI_IPR_TRACE and SCSI_IPR_DUMP should be defaulted to yes when SCSI_IPR is enabled. Signed-off-by: Brian King <brking@us.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
-
Brian King authored
Adds PCI IDs for some new ipr SAS adapters. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
-
Brian King authored
The ipr disk array devices do not support a cancel all requests primitive, so change the ipr driver to never send it. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
-
Brian King authored
If an ipr adapter hits a fatal microcode error requiring a reset while a SATA device is going through EH, it can result in a command getting issued to the ipr adapter while it is getting reset, which can cause PCI bus errors. Wait for any outstanding adapter reset to finish prior to issuing a SATA device reset. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
-
David C Somayajulu authored
This patch fixes a timing issue related to nvram accesses in qla4xxx driver for some cpu/slot speed combination. Signed-off-by: David Somayajulu <david.somayajulu@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
-
Adrian Bunk authored
This patch makes two needlessly global functions static. Signed-off-by: Adrian Bunk <bunk@stusta.de> Acked-by: "Patro, Sumant" <Sumant.Patro@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
-
David C Somayajulu authored
This patch provides the following: 1. adds support for the next version of Qlogic's iSCSI HBA, qla4032 (PCI Device ID 4032). 2. removes dead code related to topcat chip and renames qla4010_soft_reset to qla4xxx_soft_reset (minor changes). Signed-off-by: David Somayajulu <david.somayajulu@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
-
James Bottomley authored
-
James Bottomley authored
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
-
David C Somayajulu authored
On qla4xxx, the driver needs to grab the drvr semaphore provided by the hardware, prior to issuing a reset. This patches takes care of a couple of places where it was not being done. In addition there is minor clean up. Signed-off-by: David Somayajulu <david.somayajulu@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
-
Darrick J. Wong authored
When the aic94xx driver creates ascbs, each ascb is initialized with a timeout timer. If there are any ascbs left over when the driver is being torn down, these timers need to be deleted. In particular, we seem to hit this case when ascbs are issued yet never end up on the done list. Right now there's a sequencer bug that results in this happening every so often. CONTROL PHY commands are typically sent when things are really messed up with the sequencer; however, any other leftover ascb should produce loud warnings. Signed-off-by: Darrick J. Wong <djwong@us.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
-
Darrick J. Wong authored
This patch implements a REQ_DEVICE_RESET handler for the aic94xx driver. Like the earlier REQ_TASK_ABORT patch, this patch defers the device reset to the Scsi_Host's workqueue, which has the added benefit of ensuring that the device reset does not happen at the same time that the abort tmfs are being processed. After the phy reset, the busted drive should go away and be re-detected later, which is indeed what I've seen on both a x260 and a x206m. Signed-off-by: Darrick J. Wong <djwong@us.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
-
Linus Torvalds authored
* 'merge' of master.kernel.org:/pub/scm/linux/kernel/git/paulus/powerpc: [POWERPC] Fix ucc_geth of_device discovery on mpc832x [POWERPC] Revert "[POWERPC] Add powerpc get/set_rtc_time interface to new generic rtc class" [POWERPC] Revert "[POWERPC] Enable generic rtc hook for the MPC8349 mITX"
-
Linus Torvalds authored
* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: [TG3]: Add missing unlock in tg3_open() error path. [IPV6]: Fix address/interface handling in UDP and DCCP, according to the scoping architecture. [IRDA]: Lockdep fix. [BLUETOOTH]: Fix unaligned access in hci_send_to_sock. [XFRM]: nlmsg length not computed correctly in the presence of subpolicies [XFRM]: Sub-policies broke policy events [IGMP]: Fix IGMPV3_EXP() normalization bit shift value. [Bluetooth] Ignore L2CAP config requests on disconnect [Bluetooth] Always include MTU in L2CAP config responses [Bluetooth] Check if RFCOMM session is still attached to the TTY [Bluetooth] Handling pending connect attempts after inquiry [Bluetooth] Attach low-level connections to the Bluetooth bus [IPV6] IP6TUNNEL: Add missing nf_reset() on input path. [IPV6] IP6TUNNEL: Delete all tunnel device when unloading module. [IPV6] ROUTE: Do not enable router reachability probing in router mode. [IPV6] ROUTE: Prefer reachable nexthop only if the caller requests. [IPV6] ROUTE: Try to use router which is not known unreachable.
-
Kim Phillips authored
mpc832x, as in mpc8360, needs to explicitly find and create the platform device for ucc_geth in 2.6.19. This code will likely be readapted to Benh's new of_ methods for 2.6.20. Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
-