- 13 Sep, 2020 3 commits
-
-
https://github.com/Broadcom/stblinuxOlof Johansson authored
This pull request contains Broadcom ARM-based SoCs Device Tree fixes for 5.9, please pull the following: - Florian fixes the Broadcom QSPI controller binding such that the most specific compatible string is the left most one, and all existing in-tree users are updated as well. * tag 'arm-soc/for-5.9/devicetree-fixes' of https://github.com/Broadcom/stblinux: arm64: dts: ns2: Fixed QSPI compatible string ARM: dts: BCM5301X: Fixed QSPI compatible string ARM: dts: NSP: Fixed QSPI compatible string ARM: dts: bcm: HR2: Fixed QSPI compatible string dt-bindings: spi: Fix spi-bcm-qspi compatible ordering Link: https://lore.kernel.org/r/20200909211857.4144718-1-f.fainelli@gmail.comSigned-off-by: Olof Johansson <olof@lixom.net>
-
Olof Johansson authored
Merge tag 'imx-fixes-5.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes i.MX fixes for 5.9, round 2: - Fix the misspelling of 'interrupts' property in i.MX8MQ TMU DT node. - Correct 'ahb' clock for i.MX8MP SDMA1 in device tree. - Fix pad QSPI1B_SCLK mux mode for UART3 on i.MX6SX. * tag 'imx-fixes-5.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: ARM: dts: imx6sx: fix the pad QSPI1B_SCLK mux mode for uart3 arm64: dts: imx8mp: correct sdma1 clk setting arm64: dts: imx8mq: Fix TMU interrupt property Link: https://lore.kernel.org/r/20200909143844.GA25109@dragonSigned-off-by: Olof Johansson <olof@lixom.net>
-
Olof Johansson authored
Merge tag 'omap-for-v5.9/fixes-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes Fixes for omaps for v5.9-rc cycle Few fixes for omap based devices: - Fix of_clk_get() error handling for omap-iommu - Fix missing audio pinctrl entries for logicpd boards - Fix video for logicpd-som-lv after switch to generic panels - Fix omap5 DSI clocks base * tag 'omap-for-v5.9/fixes-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: omap5: Fix DSI base address and clocks ARM: dts: logicpd-som-lv-baseboard: Fix missing video ARM: dts: logicpd-som-lv-baseboard: Fix broken audio ARM: dts: logicpd-torpedo-baseboard: Fix broken audio ARM: OMAP2+: Fix an IS_ERR() vs NULL check in _get_pwrdm() Link: https://lore.kernel.org/r/pull-1599132064-54898@atomide.comSigned-off-by: Olof Johansson <olof@lixom.net>
-
- 09 Sep, 2020 5 commits
-
-
Florian Fainelli authored
The string was incorrectly defined before from least to most specific, swap the compatible strings accordingly. Fixes: ff73917d ("ARM64: dts: Add QSPI Device Tree node for NS2") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
-
Florian Fainelli authored
The string was incorrectly defined before from least to most specific, swap the compatible strings accordingly. Fixes: 1c8f4065 ("ARM: dts: BCM5301X: convert to iProc QSPI") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
-
Florian Fainelli authored
The string was incorrectly defined before from least to most specific, swap the compatible strings accordingly. Fixes: 329f98c1 ("ARM: dts: NSP: Add QSPI nodes to NSPI and bcm958625k DTSes") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
-
Florian Fainelli authored
The string was incorrectly defined before from least to most specific, swap the compatible strings accordingly. Fixes: b9099ec7 ("ARM: dts: Add Broadcom Hurricane 2 DTS include file") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
-
Florian Fainelli authored
The binding is currently incorrectly defining the compatible strings from least specifice to most specific instead of the converse. Re-order them from most specific (left) to least specific (right) and fix the examples as well. Fixes: 5fc78f4c ("spi: Broadcom BRCMSTB, NSP, NS2 SoC bindings") Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
-
- 05 Sep, 2020 2 commits
-
-
Fugang Duan authored
The pad QSPI1B_SCLK mux mode 0x1 is for function UART3_DTE_TX, correct the mux mode. Fixes: 743636f2 ("ARM: dts: imx: add pin function header for imx6sx") Signed-off-by: Fugang Duan <fugang.duan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
Robin Gong authored
Correct sdma1 ahb clk, otherwise wrong 1:1 clk ratio will be chosed so that sdma1 function broken. sdma1 should use 1:2 clk, while sdma2/3 use 1:1. Fixes: 6d9b8d20 ("arm64: dts: freescale: Add i.MX8MP dtsi support") Cc: <stable@vger.kernel.org> Signed-off-by: Robin Gong <yibin.gong@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
- 31 Aug, 2020 1 commit
-
-
Krzysztof Kozlowski authored
"interrupt" is not a valid property. Using proper name fixes dtbs_check warning: arch/arm64/boot/dts/freescale/imx8mq-zii-ultra-zest.dt.yaml: tmu@30260000: 'interrupts' is a required property Fixes: e464fd2b ("arm64: dts: imx8mq: enable the multi sensor TMU") Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
- 24 Aug, 2020 2 commits
-
-
Olof Johansson authored
Merge tag 'imx-fixes-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes i.MX fixes for 5.9: - Fix QuadSPI-memory 'reg' for LS1021A and GPIO 'ranges' for i.MX7ULP pinctrl. - A couple of DTC warning fixes on imx6qdl-gw51xx and imx6q-prtwd2 boards. - Add missing imx8mm-beacon-kit.dtb to dtbs-y for build coverage. - Fix broken PWM settings on imx6q-logicpd board. - Add missing syscon compatible to OCOTP device, so that access to UID is possible. - Fix a network regression on imx7d-zii-rmu2 due to a phy-mode mismatch. * tag 'imx-fixes-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: ARM: dts: imx7d-zii-rmu2: fix rgmii phy-mode for ksz9031 phy ARM: dts: vfxxx: Add syscon compatible with OCOTP ARM: dts: imx6q-logicpd: Fix broken PWM arm64: dts: imx: Add missing imx8mm-beacon-kit.dtb to build ARM: dts: imx6q-prtwd2: Remove unneeded i2c unit name ARM: dts: imx6qdl-gw51xx: Remove unneeded #address-cells/#size-cells ARM: dts: imx7ulp: Correct gpio ranges ARM: dts: ls1021a: fix QuadSPI-memory reg range Link: https://lore.kernel.org/r/20200824130359.GF12776@dragonSigned-off-by: Olof Johansson <olof@lixom.net>
-
Chris Healy authored
Since commit bcf3440c ("net: phy: micrel: add phy-mode support for the KSZ9031 PHY") the networking is broken on the imx7d-zii-rmu2 board. The end result is that network receive behaviour is marginal with lots of RX CRC errors experienced and NFS frequently failing. Quoting the explanation from Andrew Lunn in commit 0672d22a ("ARM: dts: imx: Fix the AR803X phy-mode"): "The problem here is, all the DTs were broken since day 0. However, because the PHY driver was also broken, nobody noticed and it worked. Now that the PHY driver has been fixed, all the bugs in the DTs now become an issue" Fix it by switching to phy-mode = "rgmii-id". Fixes: bcf3440c ("net: phy: micrel: add phy-mode support for the KSZ9031 PHY") Signed-off-by: Chris Healy <cphealy@gmail.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
- 23 Aug, 2020 5 commits
-
-
Chris Healy authored
Add syscon compatibility with Vybrid OCOTP node. This is required to access the UID. Fixes: fa8d20c8 ("ARM: dts: vfxxx: Add node corresponding to OCOTP") Cc: stable@vger.kernel.org Reviewed-by: Fabio Estevam <festevam@gmail.com> Reviewed-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Chris Healy <cphealy@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
Adam Ford authored
The DTC doesn't like the default PWM settings, because it's expecting three cells. This patch reduces adds the extra entry of 0 to the PWM reference. Fixes: fa28d821 ("ARM: dts: imx: default to #pwm-cells = <3> in the SoC dtsi files") Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Adam Ford <aford173@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
Rob Herring authored
The imx8mm-beacon-kit.dtb was never added to dtbs-y and wasn't getting built. Fix it. Fixes: 593816fa ("arm64: dts: imx: Add Beacon i.MX8m-Mini development kit") Cc: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Pengutronix Kernel Team <kernel@pengutronix.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: NXP Linux Team <linux-imx@nxp.com> Signed-off-by: Rob Herring <robh@kernel.org> Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
Fabio Estevam authored
The following dtc warning is seen when building with W=1: arch/arm/boot/dts/imx6q-prtwd2.dts:33.8-43.4: Warning (unit_address_vs_reg): /i2c@4: node has a unit name, but no reg or ranges property Remove the unneeded i2c unit name to fix the issue. Fixes: 88010b81 ("ARM: dts: add Protonic WD2 board") Signed-off-by: Fabio Estevam <festevam@gmail.com> Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
Fabio Estevam authored
The following dtc warning is seen when building with W=1: arch/arm/boot/dts/imx6qdl-gw51xx.dtsi:23.12-68.4: Warning (avoid_unnecessary_addr_size): /gpio-keys: unnecessary #address-cells/#size-cells without "ranges" or child "reg" property Remove the unneeded #address-cells/#size-cells properties to fix the issue. Fixes: 64bf0a0a ("ARM: dts: imx6qdl-gw: add Gateworks System Controller support") Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
- 22 Aug, 2020 2 commits
-
-
Anson Huang authored
Correct gpio ranges according to i.MX7ULP pinctrl driver: gpio_ptc: ONLY pin 0~19 are available; gpio_ptd: ONLY pin 0~11 are available; gpio_pte: ONLY pin 0~15 are available; gpio_ptf: ONLY pin 0~19 are available; Fixes: 20434dc9 ("ARM: dts: imx: add common imx7ulp dtsi support") Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
Matthias Schiffer authored
According to the Reference Manual, the correct size is 512 MiB. Without this fix, probing the QSPI fails: fsl-quadspi 1550000.spi: ioremap failed for resource [mem 0x40000000-0x7fffffff] fsl-quadspi 1550000.spi: Freescale QuadSPI probe failed fsl-quadspi: probe of 1550000.spi failed with error -12 Fixes: 85f8ee78 ("ARM: dts: ls1021a: Add support for QSPI with ls1021a SoC") Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
- 21 Aug, 2020 5 commits
-
-
https://github.com/Xilinx/linux-xlnxOlof Johansson authored
arm64: soc: ZynqMP DT changes for v5.9 - Add node for PS-GTR transceivers - Fix iommu node name to match dtschema * tag 'zynqmp-dt-for-v5.9' of https://github.com/Xilinx/linux-xlnx: arm64: dts: xilinx: Align IOMMU nodename with dtschema arm64: dts: zynqmp: Add GTR transceivers Signed-off-by: Olof Johansson <olof@lixom.net>
-
Krzysztof Kozlowski authored
Enable the extcon driver for NXP PTN5150A chips (CC logic for USB Type-C applications) present on some of i.MX8 evaluation boards (e.g. Variscite Symphony board). Link: https://lore.kernel.org/r/20200817065654.4419-2-krzk@kernel.orgSigned-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Olof Johansson <olof@lixom.net>
-
Krzysztof Kozlowski authored
USB OTG connections are pretty common for embedded and development boards, for example to have networking or serial access to the device. Build as a module the USB gadget configfs options so the defconfig can be used in such development configurations. Link: https://lore.kernel.org/r/20200817065654.4419-1-krzk@kernel.orgSigned-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Olof Johansson <olof@lixom.net>
-
Linus Walleij authored
Update the Integrator defconfig to the changes from the recent kernel cycles and especially the v5.9-rc1 changes. - Move options around as a result of Kconfig changes. - Drop the ZBOOT_ROM* stuff that doesn't exist anymore. - Select GPIO input and evdev as used by the pushbuttons on the machine. - Select CONFIG_DRM_DISPLAY_CONNECTOR=y, the CONFIG_DRM_SIMPLE_BRIDGE was renamed when renaming the driver, but the simple bridge requires another bridge, the display connector bridge, in order to work, so this is required to have graphics working properly in kernel v5.9-rc1+ Link: https://lore.kernel.org/r/20200820085752.42994-1-linus.walleij@linaro.orgSigned-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
-
Olof Johansson authored
Merge tag 'socfpga_fix_for_v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into fixes arm: dts: socfpga: fix for v5.9 - Fix incorrect timer3 reg entry for Arria10 * tag 'socfpga_fix_for_v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux: ARM: dts: socfpga: fix register entry for timer3 on Arria10 Link: https://lore.kernel.org/r/20200817150827.15696-1-dinguyen@kernel.orgSigned-off-by: Olof Johansson <olof@lixom.net>
-
- 19 Aug, 2020 1 commit
-
-
David Shah authored
DSI was not probing due to base address off by 0x1000, and sys_clk missing. With this patch, the Pyra display works if HDMI is disabled in the device tree. Fixes: 5a507162 ("ARM: dts: Configure interconnect target module for omap5 dsi1") Signed-off-by: David Shah <dave@ds0.me> Tested-by: H. Nikolaus Schaller <hns@goldelico.com> [tony@atomide.com: standardized subject line, added fixes tag] Signed-off-by: Tony Lindgren <tony@atomide.com>
-
- 17 Aug, 2020 7 commits
-
-
Dinh Nguyen authored
Fixes the register address for the timer3 entry on Arria10. Fixes: 475dc86d ("arm: dts: socfpga: Add a base DTSI for Altera's Arria10 SOC") Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
-
Adam Ford authored
A previous commit removed the panel-dpi driver, which made the SOM-LV video stop working because it relied on the DPI driver for setting video timings. Now that the simple-panel driver is available in omap2plus, this patch migrates the SOM-LV dev kits to use a similar panel and remove the manual timing requirements. A similar patch was already done and applied to the Torpedo family. Fixes: 8bf4b162 ("drm/omap: Remove panel-dpi driver") Signed-off-by: Adam Ford <aford173@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
-
Adam Ford authored
Older versions of U-Boot would pinmux the whole board, but as the bootloader got updated, it started to only pinmux the pins it needed, and expected Linux to configure what it needed. Unfortunately this caused an issue with the audio, because the mcbsp2 pins were configured in the device tree but never referenced by the driver. When U-Boot stopped muxing the audio pins, the audio died. This patch adds the references to the associate the pin controller with the mcbsp2 driver which makes audio operate again. Fixes: 5cb8b0fa ("ARM: dts: Move most of logicpd-som-lv-37xx-devkit.dts to logicpd-som-lv-baseboard.dtsi") Signed-off-by: Adam Ford <aford173@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
-
Adam Ford authored
Older versions of U-Boot would pinmux the whole board, but as the bootloader got updated, it started to only pinmux the pins it needed, and expected Linux to configure what it needed. Unfortunately this caused an issue with the audio, because the mcbsp2 pins were configured in the device tree, they were never referenced by the driver. When U-Boot stopped muxing the audio pins, the audio died. This patch adds the references to the associate the pin controller with the mcbsp2 driver which makes audio operate again. Fixes: 739f85bb ("ARM: dts: Move most of logicpd-torpedo-37xx-devkit to logicpd-torpedo-baseboard") Signed-off-by: Adam Ford <aford173@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
-
Jing Xiangfeng authored
The of_clk_get() function returns error pointers, it never returns NULL. Fixes: 4ea3711a ("ARM: OMAP2+: omap-iommu.c conversion to ti-sysc") Signed-off-by: Jing Xiangfeng <jingxiangfeng@huawei.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
-
Krzysztof Kozlowski authored
Fix dtschema validator warnings like: smmu@fd800000: $nodename:0: 'smmu@fd800000' does not match '^iommu@[0-9a-f]*' Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20200629081744.13916-1-krzk@kernel.org
-
Laurent Pinchart authored
Add a DT node for the PS-GTR transceivers. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/20200629120054.29338-4-laurent.pinchart@ideasonboard.com
-
- 16 Aug, 2020 6 commits
-
-
Linus Torvalds authored
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull io_uring fixes from Jens Axboe: "A few differerent things in here. Seems like syzbot got some more io_uring bits wired up, and we got a handful of reports and the associated fixes are in here. General fixes too, and a lot of them marked for stable. Lastly, a bit of fallout from the async buffered reads, where we now more easily trigger short reads. Some applications don't really like that, so the io_read() code now handles short reads internally, and got a cleanup along the way so that it's now easier to read (and documented). We're now passing tests that failed before" * tag 'io_uring-5.9-2020-08-15' of git://git.kernel.dk/linux-block: io_uring: short circuit -EAGAIN for blocking read attempt io_uring: sanitize double poll handling io_uring: internally retry short reads io_uring: retain iov_iter state over io_read/io_write calls task_work: only grab task signal lock when needed io_uring: enable lookup of links holding inflight files io_uring: fail poll arm on queue proc failure io_uring: hold 'ctx' reference around task_work queue + execute fs: RWF_NOWAIT should imply IOCB_NOIO io_uring: defer file table grabbing request cleanup for locked requests io_uring: add missing REQ_F_COMP_LOCKED for nested requests io_uring: fix recursive completion locking on oveflow flush io_uring: use TWA_SIGNAL for task_work uncondtionally io_uring: account locked memory before potential error case io_uring: set ctx sq/cq entry count earlier io_uring: Fix NULL pointer dereference in loop_rw_iter() io_uring: add comments on how the async buffered read retry works io_uring: io_async_buf_func() need not test page bit
-
Mike Rapoport authored
Commit 1355c31e ("asm-generic: pgalloc: provide generic pmd_alloc_one() and pmd_free_one()") converted parisc to use generic version of pmd_alloc_one() but it missed the fact that parisc uses order-1 pages for PMD. Restore the original version of pmd_alloc_one() for parisc, just use GFP_PGTABLE_KERNEL that implies __GFP_ZERO instead of GFP_KERNEL and memset. Fixes: 1355c31e ("asm-generic: pgalloc: provide generic pmd_alloc_one() and pmd_free_one()") Reported-by: Meelis Roos <mroos@linux.ee> Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Tested-by: Meelis Roos <mroos@linux.ee> Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org> Link: https://lkml.kernel.org/r/9f2b5ebd-e4a4-0fa1-6cd3-4b9f6892d1ad@linux.eeSigned-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull block fixes from Jens Axboe: "A few fixes on the block side of things: - Discard granularity fix (Coly) - rnbd cleanups (Guoqing) - md error handling fix (Dan) - md sysfs fix (Junxiao) - Fix flush request accounting, which caused an IO slowdown for some configurations (Ming) - Properly propagate loop flag for partition scanning (Lennart)" * tag 'block-5.9-2020-08-14' of git://git.kernel.dk/linux-block: block: fix double account of flush request's driver tag loop: unset GENHD_FL_NO_PART_SCAN on LOOP_CONFIGURE rnbd: no need to set bi_end_io in rnbd_bio_map_kern rnbd: remove rnbd_dev_submit_io md-cluster: Fix potential error pointer dereference in resize_bitmaps() block: check queue's limits.discard_granularity in __blkdev_issue_discard() md: get sysfs entry after redundancy attr group create
-
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linuxLinus Torvalds authored
Pull RISC-V fix from Palmer Dabbelt: "I collected a single fix during the merge window: we managed to break the early trap setup on !MMU, this fixes it" * tag 'riscv-for-linus-5.9-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: riscv: Setup exception vector for nommu platform
-
git://git.libc.org/linux-shLinus Torvalds authored
Pull arch/sh updates from Rich Felker: "Cleanup, SECCOMP_FILTER support, message printing fixes, and other changes to arch/sh" * tag 'sh-for-5.9' of git://git.libc.org/linux-sh: (34 commits) sh: landisk: Add missing initialization of sh_io_port_base sh: bring syscall_set_return_value in line with other architectures sh: Add SECCOMP_FILTER sh: Rearrange blocks in entry-common.S sh: switch to copy_thread_tls() sh: use the generic dma coherent remap allocator sh: don't allow non-coherent DMA for NOMMU dma-mapping: consolidate the NO_DMA definition in kernel/dma/Kconfig sh: unexport register_trapped_io and match_trapped_io_handler sh: don't include <asm/io_trapped.h> in <asm/io.h> sh: move the ioremap implementation out of line sh: move ioremap_fixed details out of <asm/io.h> sh: remove __KERNEL__ ifdefs from non-UAPI headers sh: sort the selects for SUPERH alphabetically sh: remove -Werror from Makefiles sh: Replace HTTP links with HTTPS ones arch/sh/configs: remove obsolete CONFIG_SOC_CAMERA* sh: stacktrace: Remove stacktrace_ops.stack() sh: machvec: Modernize printing of kernel messages sh: pci: Modernize printing of kernel messages ...
-
- 15 Aug, 2020 1 commit
-
-
Jens Axboe authored
One case was missed in the short IO retry handling, and that's hitting -EAGAIN on a blocking attempt read (eg from io-wq context). This is a problem on sockets that are marked as non-blocking when created, they don't carry any REQ_F_NOWAIT information to help us terminate them instead of perpetually retrying. Fixes: 227c0c96 ("io_uring: internally retry short reads") Signed-off-by: Jens Axboe <axboe@kernel.dk>
-