When application fails to pass flags in netlink TLV when replacing
existing skbmod action, the kernel will leak refcnt:

$ tc actions get action skbmod index 1
total acts 0

        action order 0: skbmod pipe set smac 00:11:22:33:44:55
         index 1 ref 1 bind 0

For example, at this point a buggy application replaces the action with
index 1 with new smac 00:aa:22:33:44:55, it fails because of zero flags,
however refcnt gets bumped:

$ tc actions get actions skbmod index 1
total acts 0

        action order 0: skbmod pipe set smac 00:11:22:33:44:55
         index 1 ref 2 bind 0
$

Tha patch fixes this by calling tcf_idr_release() on existing actions.

Fixes: 86da71b5 ("net_sched: Introduce skbmod action")
Signed-off-by: Roman Mashak <mrv@mojatatu.com>
Acked-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In case modules are not configured, error out when tp->ops is null
and prevent later null pointer dereference.

Fixes: 33a48927 ("sched: push TC filter protocol creation into a separate function")
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Acked-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Jeff Kirsher says:

====================
Intel Wired LAN Driver Updates 2018-05-11

This series contains fixes to the ice, ixgbe and ixgbevf drivers.

Jeff Shaw provides a fix to ensure rq_last_status gets set, whether or
not the hardware responds with an error in the ice driver.

Emil adds a check for unsupported module during the reset routine for
ixgbe.

Luc Van Oostenryck fixes ixgbevf_xmit_frame() where it was not using the
correct return value (int).

Colin Ian King fixes a potential resource leak in ixgbe, where we were
not freeing ipsec in our cleanup path.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

David Howells says:

====================
rxrpc: Fixes

Here are three fixes for AF_RXRPC and two tracepoints that were useful for
finding them:

 (1) Fix missing start of expect-Rx-by timeout on initial packet
     transmission so that calls will time out if the peer doesn't respond.

 (2) Fix error reception on AF_INET6 sockets by using the correct family of
     sockopts on the UDP transport socket.

 (3) Fix setting the minimum security level on kernel calls so that they
     can be encrypted.

 (4) Add a tracepoint to log ICMP/ICMP6 and other error reports from the
     transport socket.

 (5) Add a tracepoint to log UDP sendmsg failure so that we can find out if
     transmission failure occurred on the UDP socket.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

When application fails to pass flags in netlink TLV for a new skbedit action,
the kernel results in the following oops:

[    8.307732] BUG: unable to handle kernel paging request at 0000000000021130
[    8.309167] PGD 80000000193d1067 P4D 80000000193d1067 PUD 180e0067 PMD 0
[    8.310595] Oops: 0000 [#1] SMP PTI
[    8.311334] Modules linked in: kvm_intel kvm irqbypass crct10dif_pclmul crc32_pclmul ghash_clmulni_intel pcbc aesni_intel aes_x86_64 crypto_simd cryptd glue_helper serio_raw
[    8.314190] CPU: 1 PID: 397 Comm: tc Not tainted 4.17.0-rc3+ #357
[    8.315252] RIP: 0010:__tcf_idr_release+0x33/0x140
[    8.316203] RSP: 0018:ffffa0718038f840 EFLAGS: 00010246
[    8.317123] RAX: 0000000000000001 RBX: 0000000000021100 RCX: 0000000000000000
[    8.319831] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000021100
[    8.321181] RBP: 0000000000000000 R08: 000000000004adf8 R09: 0000000000000122
[    8.322645] R10: 0000000000000000 R11: ffffffff9e5b01ed R12: 0000000000000000
[    8.324157] R13: ffffffff9e0d3cc0 R14: 0000000000000000 R15: 0000000000000000
[    8.325590] FS:  00007f591292e700(0000) GS:ffff8fcf5bc40000(0000) knlGS:0000000000000000
[    8.327001] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[    8.327987] CR2: 0000000000021130 CR3: 00000000180e6004 CR4: 00000000001606a0
[    8.329289] Call Trace:
[    8.329735]  tcf_skbedit_init+0xa7/0xb0
[    8.330423]  tcf_action_init_1+0x362/0x410
[    8.331139]  ? try_to_wake_up+0x44/0x430
[    8.331817]  tcf_action_init+0x103/0x190
[    8.332511]  tc_ctl_action+0x11a/0x220
[    8.333174]  rtnetlink_rcv_msg+0x23d/0x2e0
[    8.333902]  ? _cond_resched+0x16/0x40
[    8.334569]  ? __kmalloc_node_track_caller+0x5b/0x2c0
[    8.335440]  ? rtnl_calcit.isra.31+0xf0/0xf0
[    8.336178]  netlink_rcv_skb+0xdb/0x110
[    8.336855]  netlink_unicast+0x167/0x220
[    8.337550]  netlink_sendmsg+0x2a7/0x390
[    8.338258]  sock_sendmsg+0x30/0x40
[    8.338865]  ___sys_sendmsg+0x2c5/0x2e0
[    8.339531]  ? pagecache_get_page+0x27/0x210
[    8.340271]  ? filemap_fault+0xa2/0x630
[    8.340943]  ? page_add_file_rmap+0x108/0x200
[    8.341732]  ? alloc_set_pte+0x2aa/0x530
[    8.342573]  ? finish_fault+0x4e/0x70
[    8.343332]  ? __handle_mm_fault+0xbc1/0x10d0
[    8.344337]  ? __sys_sendmsg+0x53/0x80
[    8.345040]  __sys_sendmsg+0x53/0x80
[    8.345678]  do_syscall_64+0x4f/0x100
[    8.346339]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
[    8.347206] RIP: 0033:0x7f591191da67
[    8.347831] RSP: 002b:00007fff745abd48 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
[    8.349179] RAX: ffffffffffffffda RBX: 00007fff745abe70 RCX: 00007f591191da67
[    8.350431] RDX: 0000000000000000 RSI: 00007fff745abdc0 RDI: 0000000000000003
[    8.351659] RBP: 000000005af35251 R08: 0000000000000001 R09: 0000000000000000
[    8.352922] R10: 00000000000005f1 R11: 0000000000000246 R12: 0000000000000000
[    8.354183] R13: 00007fff745afed0 R14: 0000000000000001 R15: 00000000006767c0
[    8.355400] Code: 41 89 d4 53 89 f5 48 89 fb e8 aa 20 fd ff 85 c0 0f 84 ed 00
00 00 48 85 db 0f 84 cf 00 00 00 40 84 ed 0f 85 cd 00 00 00 45 84 e4 <8b> 53 30
74 0d 85 d2 b8 ff ff ff ff 0f 8f b3 00 00 00 8b 43 2c
[    8.358699] RIP: __tcf_idr_release+0x33/0x140 RSP: ffffa0718038f840
[    8.359770] CR2: 0000000000021130
[    8.360438] ---[ end trace 60c66be45dfc14f0 ]---

The caller calls action's ->init() and passes pointer to "struct tc_action *a",
which later may be initialized to point at the existing action, otherwise
"struct tc_action *a" is still invalid, and therefore dereferencing it is an
error as happens in tcf_idr_release, where refcnt is decremented.

So in case of missing flags tcf_idr_release must be called only for
existing actions.

v2:
    - prepare patch for net tree

Fixes: 5e1567ae ("net sched: skbedit action fix late binding")
Signed-off-by: Roman Mashak <mrv@mojatatu.com>
Acked-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The error clean up path kfree's adapter->ipsec and should be
instead kfree'ing ipsec. Fix this.  Also, the err1 error exit path
does not need to kfree ipsec because this failure path was for
the failed allocation of ipsec.

Detected by CoverityScan, CID#146424 ("Resource Leak")

Fixes: 63a67fe2 ("ixgbe: add ipsec offload add and remove SA")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Shannon Nelson <shannon.nelson@oracle.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

The method ndo_start_xmit() is defined as returning an 'netdev_tx_t',
which is a typedef for an enum type, but the implementation in this
driver returns an 'int'.

Fix this by returning 'netdev_tx_t' in this driver too.
Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

Add check for unsupported module and return the error code.
This fixes a Coverity hit due to unused return status from setup_sfp.
Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

Prior to this commit, the rq_last_status was only set when hardware
responded with an error. This leads to rq_last_status being invalid
in the future when hardware eventually responds without error. This
commit resolves the issue by unconditionally setting rq_last_status
with the value returned in the descriptor.

Fixes: 940b61af ("ice: Initialize PF and setup miscellaneous
interrupt")
Signed-off-by: Jeff Shaw <jeffrey.b.shaw@intel.com>
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: Tony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

Saeed Mahameed says:

====================
Mellanox, mlx5 fixes 2018-05-10

the following series includes some fixes for mlx5 core driver.
Please pull and let me know if there's any problem.

For -stable v4.5
("net/mlx5: E-Switch, Include VF RDMA stats in vport statistics")

For -stable v4.10
("net/mlx5e: Err if asked to offload TC match on frag being first")
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Fix more memory leaks in ip_cmsg_send() callers. Part of them were fixed
earlier in 91948309.

* udp_sendmsg one was there since the beginning when linux sources were
  first added to git;
* ping_v4_sendmsg one was copy/pasted in c319b4d7.

Whenever return happens in udp_sendmsg() or ping_v4_sendmsg() IP options
have to be freed if they were allocated previously.

Add label so that future callers (if any) can use it instead of kfree()
before return that is easy to forget.

Fixes: c319b4d7 (net: ipv4: add IPPROTO_ICMP socket kind)
Signed-off-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Resources are not freed in the reverse order of the allocation.
Labels are also mixed-up.

Fix it and reorder code and labels in the error handling path of
'mlxsw_core_bus_device_register()'

Fixes: ef3116e5 ("mlxsw: spectrum: Register KVD resources with devlink")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Debabrata Banerjee says:

====================
bonding: bug fixes and regressions

Fixes to bonding driver for balance-alb mode, suitable for stable.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

There was a regression at some point from the intended functionality of
commit f60c3704 ("bonding: Fix alb mode to only use first level
vlans.")

Given the return value vlan_get_encap_level() we need to store the nest
level of the bond device, and then compare the vlan's encap level to
this. Without this, this check always fails and learning packets are
never sent.

In addition, this same commit caused a regression in the behavior of
balance_alb, which requires learning packets be sent for all interfaces
using the slave's mac in order to load balance properly. For vlan's
that have not set a user mac, we can send after checking one bit.
Otherwise we need send the set mac, albeit defeating rx load balancing
for that vlan.
Signed-off-by: Debabrata Banerjee <dbanerje@akamai.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Make sure multicast, broadcast, and zero mac's cannot be the output of rlb
updates, which should all be directed arps. Receive load balancing will be
collapsed if any of these happen, as the switch will broadcast.
Signed-off-by: Debabrata Banerjee <dbanerje@akamai.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The HW doesn't support matching on frag first/later, return error if we are
asked to offload that.

Fixes: 3f7d0eb4 ("net/mlx5e: Offload TC matching on packets being IP fragments")
Signed-off-by: Roi Dayan <roid@mellanox.com>
Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

The host side reporting of VF vport statistics didn't include the VF
RDMA traffic.

Fixes: 3b751a2a ("net/mlx5: E-Switch, Introduce get vf statistics")
Signed-off-by: Adi Nissim <adin@mellanox.com>
Reported-by: Ariel Almog <ariela@mellanox.com>
Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

Some platforms require IRQs to be free'd in the shutdown path. Otherwise
they will fail to be reallocated after a kexec.

Fixes: 8812c24d ("net/mlx5: Add fast unload support in shutdown flow")
Signed-off-by: Daniel Jurgens <danielj@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

Add a tracepoint to log transmission failure from the UDP transport socket
being used by AF_RXRPC.
Signed-off-by: David Howells <dhowells@redhat.com>

Add a tracepoint to log received ICMP/ICMP6 events and other error
messages.
Signed-off-by: David Howells <dhowells@redhat.com>

Fix the kernel call initiation to set the minimum security level for kernel
initiated calls (such as from kAFS) from the sockopt value.

Fixes: 19ffa01c ("rxrpc: Use structs to hold connection params and protocol info")
Signed-off-by: David Howells <dhowells@redhat.com>

AF_RXRPC tries to turn on IP_RECVERR and IP_MTU_DISCOVER on the UDP socket
it just opened for communications with the outside world, regardless of the
type of socket.  Unfortunately, this doesn't work with an AF_INET6 socket.

Fix this by turning on IPV6_RECVERR and IPV6_MTU_DISCOVER instead if the
socket is of the AF_INET6 family.

Without this, kAFS server and address rotation doesn't work correctly
because the algorithm doesn't detect received network errors.

Fixes: 75b54cb5 ("rxrpc: Add IPv6 support")
Signed-off-by: David Howells <dhowells@redhat.com>

The expect_rx_by call timeout is supposed to be set when a call is started
to indicate that we need to receive a packet by that point.  This is
currently put back every time we receive a packet, but it isn't started
when we first send a packet.  Without this, the call may wait forever if
the server doesn't deign to reply.

Fix this by setting the timeout upon a successful UDP sendmsg call for the
first DATA packet.  The timeout is initiated only for initial transmission
and not for subsequent retries as we don't want the retry mechanism to
extend the timeout indefinitely.

Fixes: a158bdd3 ("rxrpc: Fix call timeouts")
Reported-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>

Merge tag 'linux-can-fixes-for-4.17-20180510' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can

Marc Kleine-Budde says:

====================
this is a pull request for net/master consisting of 2 patches.

Both patches are from Lukas Wunner and fix two problems found in the
hi311x CAN driver under high load situations.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Trivial fix to spelling mistake in DP_VERBOSE message text
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In Commit 1f45f78f ("sctp: allow GSO frags to access the chunk too"),
it held the chunk in sctp_ulpevent_make_rcvmsg to access it safely later
in recvmsg. However, it also added sctp_chunk_put in fail_mark err path,
which is only triggered before holding the chunk.

syzbot reported a use-after-free crash happened on this err path, where
it shouldn't call sctp_chunk_put.

This patch simply removes this call.

Fixes: 1f45f78f ("sctp: allow GSO frags to access the chunk too")
Reported-by: syzbot+141d898c5f24489db4aa@syzkaller.appspotmail.com
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

If an error occurs, 'mlx4_en_destroy_netdev()' is called.
It then calls 'mlx4_en_free_resources()' which does the needed resources
cleanup.

So, doing some explicit kfree in the error handling path would lead to
some double kfree.

Simplify code to avoid such a case.

Fixes: 67f8b1dc ("net/mlx4_en: Refactor the XDP forwarding rings scheme")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The hyper-v transparent bonding should have used master_dev_link.
The netvsc device should look like a master bond device not
like the upper side of a tunnel.

This makes the semantics the same so that userspace applications
looking at network devices see the correct master relationshipship.

Fixes: 0c195567 ("netvsc: transparent VF management")
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'mac80211-for-davem-2018-05-09' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211

Johannes Berg says:

====================
We only have a few fixes this time:
 * WMM element validation
 * SAE timeout
 * add-BA timeout
 * docbook parsing
 * a few memory leaks in error paths
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

sysbot/KMSAN reported an uninit-value in recvmsg() that
I tracked down to tipc_sk_set_orig_addr(), missing
srcaddr->member.scope initialization.

This patches moves srcaddr->sock.scope init to follow
fields order and ease future verifications.

BUG: KMSAN: uninit-value in copy_to_user include/linux/uaccess.h:184 [inline]
BUG: KMSAN: uninit-value in move_addr_to_user+0x32e/0x530 net/socket.c:226
CPU: 0 PID: 4549 Comm: syz-executor287 Not tainted 4.17.0-rc3+ #88
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0x185/0x1d0 lib/dump_stack.c:113
 kmsan_report+0x142/0x240 mm/kmsan/kmsan.c:1067
 kmsan_internal_check_memory+0x135/0x1e0 mm/kmsan/kmsan.c:1157
 kmsan_copy_to_user+0x69/0x160 mm/kmsan/kmsan.c:1199
 copy_to_user include/linux/uaccess.h:184 [inline]
 move_addr_to_user+0x32e/0x530 net/socket.c:226
 ___sys_recvmsg+0x4e2/0x810 net/socket.c:2285
 __sys_recvmsg net/socket.c:2328 [inline]
 __do_sys_recvmsg net/socket.c:2338 [inline]
 __se_sys_recvmsg net/socket.c:2335 [inline]
 __x64_sys_recvmsg+0x325/0x460 net/socket.c:2335
 do_syscall_64+0x154/0x220 arch/x86/entry/common.c:287
 entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x4455e9
RSP: 002b:00007fe3bd36ddb8 EFLAGS: 00000246 ORIG_RAX: 000000000000002f
RAX: ffffffffffffffda RBX: 00000000006dac24 RCX: 00000000004455e9
RDX: 0000000000002002 RSI: 0000000020000400 RDI: 0000000000000003
RBP: 00000000006dac20 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
R13: 00007fff98ce4b6f R14: 00007fe3bd36e9c0 R15: 0000000000000003

Local variable description: ----addr@___sys_recvmsg
Variable was created at:
 ___sys_recvmsg+0xd5/0x810 net/socket.c:2246
 __sys_recvmsg net/socket.c:2328 [inline]
 __do_sys_recvmsg net/socket.c:2338 [inline]
 __se_sys_recvmsg net/socket.c:2335 [inline]
 __x64_sys_recvmsg+0x325/0x460 net/socket.c:2335

Byte 19 of 32 is uninitialized

Fixes: 31c82a2d ("tipc: add second source address to recvmsg()/recvfrom()")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Cc: Jon Maloy <jon.maloy@ericsson.com>
Cc: Ying Xue <ying.xue@windriver.com>
Acked-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

- correct a typo in the value of 'matchPattern' of test 282d, potentially
 causing false negative
- allow errors when 'teardown' executes '$TC action flush action bpf' in
 test 282d, to fix false positive when it is run with act_bpf unloaded
- correct the value of 'matchPattern' in test e939, causing false positive
 in case the BPF JIT is enabled

Fixes: 440ea4ae ("tc-testing: add selftests for 'bpf' action")
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Acked-by: Lucas Bates <lucasb@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add check of coalescing parameters received through ethtool are within
range of values supported by the HW.
Driver gets the coalescing rx/tx-usecs and rx/tx-frames as set by the
users through ethtool. The ethtool support up to 32 bit value for each.
However, mlx4 modify cq limits the coalescing time parameter and
coalescing frames parameters to 16 bits.
Return out of range error if user tries to set these parameters to
higher values.
Change type of sample-interval and adaptive_rx_coal parameters in mlx4
driver to u32 as the ethtool holds them as u32 and these parameters are
not limited due to mlx4 HW.

Fixes: c27a02cd ('mlx4_en: Add driver for Mellanox ConnectX 10GbE NIC')
Signed-off-by: Moshe Shemesh <moshe@mellanox.com>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

copy mbox size to adapter instances of PF0-3 to avoid
mbox log overflow. This fixes the possible protection
fault.

Fixes: baf50868 ("cxgb4: restructure VF mgmt code")
Signed-off-by: Casey Leedom <leedom@chelsio.com>
Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

firmware expects HMA memory to be zeroed, use __GFP_ZERO
for HMA memory allocation.

Fixes: 8b4e6b3c ("cxgb4: Add HMA support")
Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Damir reported a breakage of SO_BINDTODEVICE for UDP sockets.
In absence of VRF devices, after commit fb74c277 ("net:
ipv4: add second dif to udp socket lookups") the dif mismatch
isn't fatal anymore for UDP socket lookup with non null
sk_bound_dev_if, breaking SO_BINDTODEVICE semantics.

This changeset addresses the issue making the dif match mandatory
again in the above scenario.
Reported-by: Damir Mansurov <dnman@oktetlabs.ru>
Fixes: fb74c277 ("net: ipv4: add second dif to udp socket lookups")
Fixes: 1801b570 ("net: ipv6: add second dif to udp socket lookups")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Acked-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

After route cache is flushed via ipv4_sysctl_rtcache_flush(), we forget
to reset fnhe_mtu_locked in rt_bind_exception(). When pmtu is updated
in __ip_rt_update_pmtu(), it will return directly since the pmtu is
still locked. e.g.

+ ip netns exec client ping 10.10.1.1 -c 1 -s 1400 -M do
PING 10.10.1.1 (10.10.1.1) 1400(1428) bytes of data.
>From 10.10.0.254 icmp_seq=1 Frag needed and DF set (mtu = 0)
Signed-off-by: David S. Miller <davem@davemloft.net>

On older windows hosts the net_device instance is returned to
the caller of rndis_filter_device_add() without having the presence
bit set first. This would cause any subsequent calls to network device
operations (e.g. MTU change, channel change) to fail after the device
is detached once, returning -ENODEV.

Instead of returning the device instabce, we take the exit path where
we call netif_device_attach()

Fixes: 7b2ee50c ("hv_netvsc: common detach logic")
Signed-off-by: Mohammed Gamal <mgamal@redhat.com>
Reviewed-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Since commit 29a5dcae ("nfp: flower: offload phys port MTU change") we
take encapsulation headroom into account when calculating the max allowed
MTU.  This is unnecessary as the max MTU advertised by firmware should have
already accounted for encap headroom.

Subtracting headroom twice brings the max MTU below what's necessary for
some deployments.

Fixes: 29a5dcae ("nfp: flower: offload phys port MTU change")
Signed-off-by: Pieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com>
Reviewed-by: John Hurley <john.hurley@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Trivial fix to spelling mistake in dev_warn message text
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Trivial fix to spelling mistake in error string
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>