An error occurred fetching the project authors.
- 05 Dec, 2019 3 commits
-
-
Yong Zhao authored
Up to this point, those functions are all the same for all ASICs, so no need to call them by functions pointers. Removing the function pointers will greatly increase the code readablity. If there is ever need for those function pointers, we can add it back then. Signed-off-by:
Yong Zhao <Yong.Zhao@amd.com> Reviewed-by:
Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
James Zhu authored
SPI limits total CS waves in flight per SE to no more than 32 * num_cu and we need to stuff 40 waves on a CU to completely clean the SGPR. This is accomplished in the WR by cleaning the SE in two steps, half of the CU per step. Signed-off-by:
James Zhu <James.Zhu@amd.com> Reviewed-by:
Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by:
-
Guchun Chen authored
When security violation from new vbios happens, data fabric is risky to stop working. So prevent the direct access to DF mmFabricConfigAccessControl from the new vbios and onwards. Signed-off-by:
Guchun Chen <guchun.chen@amd.com> Reviewed-by:
-
- 03 Dec, 2019 8 commits
-
-
Alex Deucher authored
Shift and mask were reversed. Noticed by chance. Tested-by:
Meelis Roos <mroos@linux.ee> Reviewed-by:
Michel Dänzer <mdaenzer@redhat.com> Signed-off-by:
-
Zhan Liu authored
[Why] NV10/14 has released. Its time to get NV10/14 bounding box directly from code. [How] Retrieve NV10/14 bounding box data directly from code. Signed-off-by:
Zhan Liu <zhan.liu@amd.com> Reviewed-by:
Hersen Wu <hersenxs.wu@amd.com> Signed-off-by:
-
Yong Zhao authored
Adjust the exposed function prototype so that the caller does not need to know the MMHUB number. Signed-off-by:
-
Likun Gao authored
Drop smu_send_smc_msg function from ASIC specify structure. Reuse smu_send_smc_msg_with_param function for smu_send_smc_msg. Set paramer to 0 for smu_send_msg function, otherwise it will send with previous paramer value (Not a certain value). Materialize msg type for smu send message function definition. Signed-off-by:
Likun Gao <Likun.Gao@amd.com> Reviewed-by:
Kevin Wang <kevin1.wang@amd.com> Reviewed-by:
Evan Quan <evan.quan@amd.com> Signed-off-by:
-
Hawking Zhang authored
Platform TAs will independently toggle DF Cstate. for instance, get/set topology from xgmi ta. do error injection from ras ta. In such case, PMFW needs to be loaded before TAs so that all the subsequent Cstate calls recieved by PSP FW can be routed to PMFW. Signed-off-by:
-
Hawking Zhang authored
issue unload_ta_cmd to tOS to unload asd driver Signed-off-by:
-
Hawking Zhang authored
asd shared memory is not needed since drivers doesn't invoke any further cmd to asd directly after the asd loading. trust application is the one who needs to talk to asd after the initialization Signed-off-by:
-
Jack Zhang authored
For boards greater than ARCTURUS, and under sriov platform, swSMU is not supported because smu ip block is commented at guest driver. Generally for sriov, initialization of smu is moved to host driver. Thus, smu sw_init and hw_init will not be executed at guest driver. Without sw structure being initialized in guest driver, swSMU cannot declare to be supported. Signed-off-by:
Jack Zhang <Jack.Zhang1@amd.com> Reviewed-by:
-
- 02 Dec, 2019 29 commits
-
-
Colin Ian King authored
The variable v_total is being initialized with a value that is never read and it is being updated later with a new value. The initialization is redundant and can be removed. Addresses-Coverity: ("Unused value") Signed-off-by:Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
zhengbin authored
Fixes coccicheck warning: drivers/gpu/drm/amd/display/dc/dml/dcn21/display_rq_dlg_calc_21.c:1525:144-145: Unneeded semicolon drivers/gpu/drm/amd/display/dc/dml/dcn21/display_rq_dlg_calc_21.c:1526:142-143: Unneeded semicolon Reviewed-by:
Harry Wentland <harry.wentland@amd.com> Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
zhengbin <zhengbin13@huawei.com> Signed-off-by:
-
zhengbin authored
Fixes coccicheck warning: drivers/gpu/drm/amd/display/modules/hdcp/hdcp.c:506:2-3: Unneeded semicolon Reviewed-by:
-
zhengbin authored
Fixes coccicheck warning: drivers/gpu/drm/amd/display/dc/bios/bios_parser2.c:995:2-3: Unneeded semicolon Reviewed-by:
-
zhengbin authored
Fixes coccicheck warning: drivers/gpu/drm/amd/display/dc/bios/bios_parser.c:2192:2-3: Unneeded semicolon Reviewed-by:
-
zhengbin authored
Fixes coccicheck warning: drivers/gpu/drm/amd/powerplay/amdgpu_smu.c:1192:5-8: Unneeded variable: "ret". Return "0" on line 1195 drivers/gpu/drm/amd/powerplay/amdgpu_smu.c:1945:5-8: Unneeded variable: "ret". Return "0" on line 1961 Reported-by:
-
zhengbin authored
Fixes coccicheck warning: drivers/gpu/drm/amd/powerplay/hwmgr/vega12_hwmgr.c:502:5-11: Unneeded variable: "result". Return "0" on line 515 Reported-by:
-
zhengbin authored
Fixes coccicheck warning: drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c:5188:5-8: Unneeded variable: "ret". Return "0" on line 5196 Reported-by:
-
zhengbin authored
Fixes coccicheck warning: drivers/gpu/drm/amd/powerplay/hwmgr/vega10_hwmgr.c:4363:5-11: Unneeded variable: "result". Return "0" on line 4370 Reported-by:
-
zhengbin authored
Fixes coccicheck warning: drivers/gpu/drm/amd/powerplay/hwmgr/smu10_hwmgr.c:1154:5-11: Unneeded variable: "result". Return "0" on line 1159 Reported-by:
-
Colin Ian King authored
The msg_id field is being assigned twice. Fix this by replacing the second assignment with an assignment to msg_size. Addresses-Coverity: ("Unused value") Fixes: 11a00965 ("drm/amd/display: Add PSP block to verify HDCP2.2 steps") Reviewed-by: -
Alex Deucher authored
Removing this causes hangs in some games, so re-add it, but add a timeout so we don't hang while switching flip types. Bug: https://bugzilla.kernel.org/show_bug.cgi?id=205169 Bug: https://bugs.freedesktop.org/show_bug.cgi?id=112266Reviewed-by:
-
Zhan liu authored
[Why] NV14 is using its own ip params that's different from other DCN2.0 ASICs. [How] Add ASIC revision check to make sure NV14 gets correct ip params. Signed-off-by:
Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by:
-
Zhan liu authored
[Why] NV14 IP Parameters are missing. [How] Add IP Parameters in. Signed-off-by:
-
Emily Deng authored
As will call unload kms when initialize fail, and the unload kms will send event 3 and 4, so don't need event 3 and 4 in device init. Signed-off-by:
Emily Deng <Emily.Deng@amd.com> Reviewed-by:
-
John Clements authored
Added max hive/node info checks per supported ASIC Reviewed-by:
John Clements <john.clements@amd.com> Signed-off-by:
-
Bhawanpreet Lakha authored
load the ta firmware for navi10/12/14. This is already being done for raven/picasso and is needed for supporting hdcp on navi Signed-off-by:
Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Acked-by:
-
Yintian Tao authored
When load amdgpu failed before create pm_sysfs and ucode_sysfs, the pm_sysfs and ucode_sysfs should not be removed. Otherwise, there will be warning call trace just like below. [ 24.836386] [drm] VCE initialized successfully. [ 24.841352] amdgpu 0000:00:07.0: amdgpu_device_ip_init failed [ 25.370383] amdgpu 0000:00:07.0: Fatal error during GPU init [ 25.889575] [drm] amdgpu: finishing device. [ 26.069128] amdgpu 0000:00:07.0: [drm:amdgpu_ring_test_helper [amdgpu]] *ERROR* ring kiq_2.1.0 test failed (-110) [ 26.070110] [drm:gfx_v9_0_hw_fini [amdgpu]] *ERROR* KCQ disable failed [ 26.200309] [TTM] Finalizing pool allocator [ 26.200314] [TTM] Finalizing DMA pool allocator [ 26.200349] [TTM] Zone kernel: Used memory at exit: 0 KiB [ 26.200351] [TTM] Zone dma32: Used memory at exit: 0 KiB [ 26.200353] [drm] amdgpu: ttm finalized [ 26.205329] ------------[ cut here ]------------ [ 26.205330] sysfs group 'fw_version' not found for kobject '0000:00:07.0' [ 26.205347] WARNING: CPU: 0 PID: 1228 at fs/sysfs/group.c:256 sysfs_remove_group+0x80/0x90 [ 26.205348] Modules linked in: amdgpu(OE+) gpu_sched(OE) ttm(OE) drm_kms_helper(OE) drm(OE) i2c_algo_bit fb_sys_fops syscopyarea sysfillrect sysimgblt rpcsec_gss_krb5 auth_rpcgss nfsv4 nfs lockd grace fscache binfmt_misc snd_hda_codec_generic ledtrig_audio crct10dif_pclmul snd_hda_intel crc32_pclmul snd_hda_codec ghash_clmulni_intel snd_hda_core snd_hwdep snd_pcm snd_timer input_leds snd joydev soundcore serio_raw pcspkr evbug aesni_intel aes_x86_64 crypto_simd cryptd mac_hid glue_helper sunrpc ip_tables x_tables autofs4 8139too psmouse 8139cp mii i2c_piix4 pata_acpi floppy [ 26.205369] CPU: 0 PID: 1228 Comm: modprobe Tainted: G OE 5.2.0-rc1 #1 [ 26.205370] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014 [ 26.205372] RIP: 0010:sysfs_remove_group+0x80/0x90 [ 26.205374] Code: e8 35 b9 ff ff 5b 41 5c 41 5d 5d c3 48 89 df e8 f6 b5 ff ff eb c6 49 8b 55 00 49 8b 34 24 48 c7 c7 48 7a 70 98 e8 60 63 d3 ff <0f> 0b eb d7 66 90 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 55 [ 26.205375] RSP: 0018:ffffbee242b0b908 EFLAGS: 00010282 [ 26.205376] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000006 [ 26.205377] RDX: 0000000000000007 RSI: 0000000000000092 RDI: ffff97ad6f817380 [ 26.205377] RBP: ffffbee242b0b920 R08: ffffffff98f520c4 R09: 00000000000002b3 [ 26.205378] R10: ffffbee242b0b8f8 R11: 00000000000002b3 R12: ffffffffc0e58240 [ 26.205379] R13: ffff97ad6d1fe0b0 R14: ffff97ad4db954c8 R15: ffff97ad4db7fff0 [ 26.205380] FS: 00007ff3d8a1c4c0(0000) GS:ffff97ad6f800000(0000) knlGS:0000000000000000 [ 26.205381] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 26.205381] CR2: 00007f9b2ef1df04 CR3: 000000042aab8001 CR4: 00000000003606f0 [ 26.205384] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 26.205385] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 26.205385] Call Trace: [ 26.205461] amdgpu_ucode_sysfs_fini+0x18/0x20 [amdgpu] [ 26.205518] amdgpu_device_fini+0x3b4/0x560 [amdgpu] [ 26.205573] amdgpu_driver_unload_kms+0x4f/0xa0 [amdgpu] [ 26.205623] amdgpu_driver_load_kms+0xcd/0x250 [amdgpu] [ 26.205637] drm_dev_register+0x12b/0x1c0 [drm] [ 26.205695] amdgpu_pci_probe+0x12a/0x1e0 [amdgpu] [ 26.205699] local_pci_probe+0x47/0xa0 [ 26.205701] pci_device_probe+0x106/0x1b0 [ 26.205704] really_probe+0x21a/0x3f0 [ 26.205706] driver_probe_device+0x11c/0x140 [ 26.205707] device_driver_attach+0x58/0x60 [ 26.205709] __driver_attach+0xc3/0x140 Signed-off-by:
Yintian Tao <yttao@amd.com> Acked-by:
Christian König <christian.koenig@amd.com> Reviewed-by:
Nirmoy Das <nirmoy.das@amd.com> Signed-off-by:
-
Monk Liu authored
still need to init csb even for SRIOV v2: drop init_pg() for gfx10 at all since PG and GFX off feature will be fully controled by RLC and SMU fw for gfx10 v3: drop the flush_gpu_tlb lines since we consider it is only usefull in emulation Signed-off-by:
Monk Liu <Monk.Liu@amd.com> Reviewed-by:
-
Monk Liu authored
To align with the scheme from gfx9 disabling GFX ring after VM shutdown could avoid garbage data be fetched to GFX RB which may lead to unnecessary screw up on GFX Signed-off-by:
-
Monk Liu authored
since we don't have RLCG ucode loading and no SRlist as well Signed-off-by:
-
Monk Liu authored
Signed-off-by:
-
Monk Liu authored
issue: kernel would report a warning from a double unpin during the driver unloading on the CSB bo why: we unpin it during hw_fini, and there will be another unpin in sw_fini on CSB bo. fix: actually we don't need to pin/unpin it during hw_init/fini since it is created with kernel pinned, we only need to fullfill the CSB again during hw_init to prevent CSB/VRAM lost after S3 v2: get_csb in init_rlc so hw_init() will make CSIB content back even after reset or s3 v3: use bo_create_kernel instead of bo_create_reserved for CSB otherwise the bo_free_kernel() on CSB is not aligned and would lead to its internal reserve pending there forever take care of gfx7/8 as well Signed-off-by:
Xiaojie Yuan <xiaojie.yuan@amd.com> Signed-off-by:
-
Harry Wentland authored
We don't use this upstream in the Linux kernel. Signed-off-by:
-
Zhan Liu authored
[Why] "num_vmid" and "num_dsc" are missing within NV14's resource caps structure. [How] Add the missing parts. Signed-off-by:
-
Monk Liu authored
otherwse the flush_gpu_tlb will hang if we unload the KMD becuase the schedulers already stopped Signed-off-by:
-
James Zhu authored
For Arcturus, increase dispatch packet number to stress scheduler. Signed-off-by:
-
James Zhu authored
Clear SDMA and HDP EDC counter in GPR workarounds. Signed-off-by:
-
Xiaojie Yuan authored
Signed-off-by:
-
