- 06 Mar, 2020 4 commits
-
-
Chris Wilson authored
Teach gvt to use intel_gt directly as it currently assumes direct HW access. [Zhenyu: rebase, fix compiling] Cc: Ding Zhuocheng <zhuocheng.ding@intel.com> Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Acked-by:
Zhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by:
-
Chris Wilson authored
Stop trying to escape out of the gvt layer to find the engine that we initially setup for use with gvt. Record the engines during initialisation and use them henceforth. add/remove: 1/4 grow/shrink: 22/28 up/down: 341/-1410 (-1069) [Zhenyu: rebase, fix nonpriv register check fault, fix gvt engine thread run failure.] Cc: Ding Zhuocheng <zhuocheng.ding@intel.com> Signed-off-by:
-
Chris Wilson authored
Remove extra chatty message for debugfs scan_nonprivbb which is used to enable scan for non privileged batch on specific engine. Just write target i915 engine mask instead. Cc: Ding Zhuocheng <zhuocheng.ding@intel.com> Signed-off-by:
-
Tina Zhang authored
Commit c3b5a843 ("drm/i915/gvt: Enable gfx virtualiztion for CFL") added the support on CFL. The vgpu emulation hotplug support on CFL was supposed to be included in that patch. Without the vgpu emulation hotplug support, the dma-buf based display gives us a blur face. So fix this issue by adding the vgpu emulation hotplug support on CFL. Fixes: c3b5a843 ("drm/i915/gvt: Enable gfx virtualiztion for CFL") Signed-off-by:
Tina Zhang <tina.zhang@intel.com> Acked-by:
-
- 25 Feb, 2020 1 commit
-
-
Tina Zhang authored
When vgpu ptr is unavailable, the drm_WARN* can hang the whole system due to the drm pointer is NULL. This patch fixes this issue by using WARN directly which won't care about the drm pointer. Fixes: 12d58619 ("drm/i915/gvt: Make WARN* drm specific where vgpu ptr is available") Signed-off-by:
-
- 24 Feb, 2020 2 commits
-
-
Pankaj Bharadiya authored
Drm specific drm_WARN* calls include device information in the backtrace, so we know what device the warnings originate from. Covert all the calls of WARN* with device specific drm_WARN* variants in functions where drm_device struct pointer is readily available. The conversion was done automatically with below coccinelle semantic patch. checkpatch errors/warnings are fixed manually. @@ identifier func, T; @@ func(struct intel_vgpu *T,...) { +struct drm_i915_private *i915 = T->gvt->dev_priv; <+... ( -WARN( +drm_WARN(&i915->drm, ...) | -WARN_ON( +drm_WARN_ON(&i915->drm, ...) | -WARN_ONCE( +drm_WARN_ONCE(&i915->drm, ...) | -WARN_ON_ONCE( +drm_WARN_ON_ONCE(&i915->drm, ...) ) ...+> } Signed-off-by:Pankaj Bharadiya <pankaj.laxminarayan.bharadiya@intel.com> Acked-by:
-
Pankaj Bharadiya authored
drm specific WARN* calls include device information in the backtrace, so we know what device the warnings originate from. Covert all the calls of WARN* with device specific drm_WARN* variants in functions where drm_i915_private struct pointer is readily available. The conversion was done automatically with below coccinelle semantic patch. checkpatch errors/warnings are fixed manually. @rule1@ identifier func, T; @@ func(...) { ... struct drm_i915_private *T = ...; <+... ( -WARN( +drm_WARN(&T->drm, ...) | -WARN_ON( +drm_WARN_ON(&T->drm, ...) | -WARN_ONCE( +drm_WARN_ONCE(&T->drm, ...) | -WARN_ON_ONCE( +drm_WARN_ON_ONCE(&T->drm, ...) ) ...+> } @rule2@ identifier func, T; @@ func(struct drm_i915_private *T,...) { <+... ( -WARN( +drm_WARN(&T->drm, ...) | -WARN_ON( +drm_WARN_ON(&T->drm, ...) | -WARN_ONCE( +drm_WARN_ONCE(&T->drm, ...) | -WARN_ON_ONCE( +drm_WARN_ON_ONCE(&T->drm, ...) ) ...+> } Signed-off-by:
-
- 20 Feb, 2020 5 commits
-
-
Julian Stecklina authored
Instead of defining KVMGT per-device state in struct intel_vgpu directly, add an indirection. This makes the GVT code oblivious of what state KVMGT needs to keep. The intention here is to eventually make it possible to build hypervisor backends for the mediator, without having to touch the mediator itself. This is a first step. v2: - rebased onto gvt-staging (no conflicts) Signed-off-by:
Julian Stecklina <julian.stecklina@cyberus-technology.de> Acked-by:
-
Zhenyu Wang authored
Backmerge to pull in https://patchwork.freedesktop.org/patch/353621/?series=73544&rev=1Signed-off-by:
-
Manasi Navare authored
If one of the synced crtcs needs a full modeset, we need to make sure all the synced crtcs are forced a full modeset. v3: * Remove ~BIT(cpu_trans) which is a nop (Ville) * use get_new_crtc_state and remove error check (Ville) v2: * Add tiles based on cpu_trans check (Ville) Suggested-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
Manasi Navare <manasi.d.navare@intel.com> Reviewed-by:
Uma Shankar <uma.shankar@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200214114126.13192-3-manasi.d.navare@intel.com
-
Manasi Navare authored
This patch pushes out the computation of master and slave transcoders in crtc states after encoder's compute_config hook. This ensures that the assigned master slave crtcs have exact same mode and timings which is a requirement for Port sync mode to be enabled. v3: * Make crtc_state const, remove crtc state NULL init (Ville) v2: * Correct indentation * Rename to intel_ddi_port_sync_transcoders (Ville) * remove unwanted debug (Ville) Suggested-by:
-
Ville Syrjälä authored
Add an optional secondary encoder state compute hook. This gets called after the normak .compute_config() has been called for all the encoders in the state. Thus in the new hook we can rely on all derived state populated by .compute_config() to be already set up. Should be useful for MST and port sync master/slave transcoder selection. Signed-off-by:
-
- 19 Feb, 2020 8 commits
-
-
Chris Wilson authored
For dgfx, we do not need to reconfigure the IA/ring frequencies of the main processors as they are distinct devices. Signed-off-by:
Andi Shyti <andi.shyti@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200219130119.1457693-1-chris@chris-wilson.co.uk
-
Chris Wilson authored
Currently, we check that a new context has a clear set of general purpose registers. Add a little bit of hostility by preempting our new context and re-poisoning the GPR to ensure that there is no context leakage from preemption. Signed-off-by:
Ramalingam C <ramalingam.c@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200219123418.1447428-1-chris@chris-wilson.co.uk
-
Chris Wilson authored
Check that the CTX_TIMESTAMP is monotonic across context save/restore and upon preemption. References: https://gitlab.freedesktop.org/drm/intel/issues/1233Signed-off-by:
-
Chris Wilson authored
Read the rawclk_freq during runtime info probing, prior to its first use in computing the CS timestamp frequency. Then store it in the runtime info, and include it in the debug printouts. Closes: https://gitlab.freedesktop.org/drm/intel/issues/834Signed-off-by:
-
Chris Wilson authored
On dgfx, we only use l3cc and not mocs, but we share the table containing both register definitions with Tigerlake. This confuses our selftest that verifies that both sets of registers do contain the values in our tables after various events (idling, reset, activity etc). When constructing the table of register definitions, also include the flags for which registers are valid so that information is computed centrally and available to all callers. Signed-off-by:
Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200218162150.1300405-10-chris@chris-wilson.co.uk
-
Jani Nikula authored
Push irq uninstall further up, by splitting i915_driver_modeset_remove() to two, the part with working irqs before irq uninstall, and the part after irq uninstall. No functional changes. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200214135058.7580-2-jani.nikula@intel.com
-
Jani Nikula authored
Split intel_modeset_driver_remove() to two, the part with working irqs before irq uninstall, and the part after irq uninstall. Move irq_unintall() closer to the layer it belongs. The error path in i915_driver_modeset_probe() looks obviously weird after this, but remains as good or broken as it ever was. No functional changes. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
-
Jani Nikula authored
spinlock_t is one case where the typedef is to be preferred over struct spinlock. Fixes: 42fb60de ("drm/i915/gem: Don't leak non-persistent requests on changing engines") Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by:
-
- 18 Feb, 2020 7 commits
-
-
Chris Wilson authored
As we have the total runtime known to us, show it when dumping the engine state for debug. Signed-off-by:
Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200218162150.1300405-2-chris@chris-wilson.co.uk
-
Chris Wilson authored
Always flush the tasklet if we have pending submissions in wait_for_submit(), so that even if we see the HW has started before we process its ack, when we return the execlists state is well defined. Fixes: 06289949 ("drm/i915/selftests: Check for any sign of request starting in wait_for_submit()") Signed-off-by:
-
Chris Wilson authored
Just missed setting err along an interruptible error path for the intel_engine_pulse(). Signed-off-by:
-
Chris Wilson authored
We only want to wait until the request has been submitted at least once; that is it is either in flight, or has been. References: fcf7df7a ("drm/i915/selftests: Check for the error interrupt before we wait!") Signed-off-by:
-
Rafael Antognolli authored
It's not clear whether this workaround is final yet, but the BSpec indicates that userspace needs to set bit 9 of this register on demand: "To avoid sporadic corruptions “Set 0x7010[9] when Depth Buffer Surface Format is D16_UNORM , surface type is not NULL & 1X_MSAA" Closes: https://gitlab.freedesktop.org/mesa/mesa/issues/2501Signed-off-by:
Rafael Antognolli <rafael.antognolli@intel.com> [mattrope: Tweaked comment while applying] Signed-off-by:
Matt Roper <matthew.d.roper@intel.com> Reviewed-by:
-
Jani Nikula authored
The implicit "dev_priv" local variable use has been a long-standing pain point in the register access macros I915_READ(), I915_WRITE(), POSTING_READ(), I915_READ_FW(), and I915_WRITE_FW(). Replace them with the corresponding new display engine register accessors intel_de_read(), intel_de_write(), intel_de_posting_read(), intel_de_read_fw(), and intel_de_write_fw(). No functional changes. Generated using the following semantic patch: @@ expression REG, OFFSET; @@ - I915_READ(REG) + intel_de_read(dev_priv, REG) @@ expression REG, OFFSET; @@ - POSTING_READ(REG) + intel_de_posting_read(dev_priv, REG) @@ expression REG, OFFSET; @@ - I915_WRITE(REG, OFFSET) + intel_de_write(dev_priv, REG, OFFSET) @@ expression REG; @@ - I915_READ_FW(REG) + intel_de_read_fw(dev_priv, REG) @@ expression REG, OFFSET; @@ - I915_WRITE_FW(REG, OFFSET) + intel_de_write_fw(dev_priv, REG, OFFSET) Reviewed-by:
-
Jani Nikula authored
The implicit "dev_priv" local variable use has been a long-standing pain point in the register access macros I915_READ(), I915_WRITE(), POSTING_READ(), I915_READ_FW(), and I915_WRITE_FW(). Replace them with the corresponding new display engine register accessors intel_de_read(), intel_de_write(), intel_de_posting_read(), intel_de_read_fw(), and intel_de_write_fw(). No functional changes. Generated using the following semantic patch: @@ expression REG, OFFSET; @@ - I915_READ(REG) + intel_de_read(dev_priv, REG) @@ expression REG, OFFSET; @@ - POSTING_READ(REG) + intel_de_posting_read(dev_priv, REG) @@ expression REG, OFFSET; @@ - I915_WRITE(REG, OFFSET) + intel_de_write(dev_priv, REG, OFFSET) @@ expression REG; @@ - I915_READ_FW(REG) + intel_de_read_fw(dev_priv, REG) @@ expression REG, OFFSET; @@ - I915_WRITE_FW(REG, OFFSET) + intel_de_write_fw(dev_priv, REG, OFFSET) Reviewed-by:
-
- 17 Feb, 2020 6 commits
-
-
Chris Wilson authored
The ringbuffer's vma is expected to be in the GGTT and that is now being checked, so make sure the mocked ring declares it so. Signed-off-by:
-
Chris Wilson authored
Without selftests enabled, I915_SELFTEST_ONLY becomes a dummy, generating a bare '0'. This causes the compiler to complain about a useless line, and while we could use I915_SELFTEST_DECLARE instead, it is a bit messier. Move the selftest-only code to a helper and make that conditional on having selftests enabled. Reported-by:
kbuild test robot <lkp@intel.com> Signed-off-by:
-
Jani Nikula authored
Prefer intel_uncore_* over I915_READ, I915_WRITE, and POSTING_READ. Reviewed-by:
-
Jani Nikula authored
i915_drv.c is a fairly big file, and having very specific vlv/chv suspend/resume code in it is a distraction. Split it out to a new vlv_suspend.[ch] file. Reviewed-by:
-
Jani Nikula authored
We've moved from bugzilla to gitlab. Cc: stable@vger.kernel.org Reviewed-by:
-
Jani Nikula authored
We've moved from bugzilla to gitlab. Cc: stable@vger.kernel.org Reviewed-by:
-
- 16 Feb, 2020 2 commits
-
-
Chris Wilson authored
Since we use a HW readback or estimation of the CS timestamp frequency, sometimes it may result in 0. Avoid the division-by-zero in computing its reciprocal, the timestamp period. Signed-off-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200216161746.500258-1-chris@chris-wilson.co.uk
-
Tvrtko Ursulin authored
GPU saves accumulated context runtime (in CS timestamp units) in PPHWSP which will be useful for us in cases when we are not able to track context busyness ourselves (like with GuC). Keep a copy of this in struct intel_context from where it can be easily read even if the context is not pinned. v2: (Chris) * Do not store pphwsp address in intel_context. * Log CS wrap-around. * Simplify calculation by relying on integer wraparound. v3: * Include total/avg in traces and error state for debugging Signed-off-by:
-
- 15 Feb, 2020 4 commits
-
-
Ville Syrjälä authored
Currently when we load the driver we set distrust_bios_wm=true, which will cause active_pipe_changes to get flagged even when we're not toggling any pipes on/off. The reason being that we want to fully redistribute the dbuf among the active pipes and ignore whatever state the firmware left behind. Unfortunately when the code flags active_pipe_changes it doesn't set state->modeset to true, which means the hardware dbuf state won't actually get updated. Hence the hardware and software states go out of sync, which can result in planes trying to use a disabled dbuf slice. Suprisingly that only seems to corrupt the display rather than making the whole display engine keel over. Let's fix this for now by flagging state->modeset whenever distrust_bios_wm is set. Eventually we'll likely want to rip out all of this mess and introduce proper statye tracking for dbuf. But that requires more work. Toss in a FIXME to that effect. Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Fixes: ff2cd863 ("drm/i915: Correctly map DBUF slices to pipes") Signed-off-by:
Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Reviewed-by:
-
Jani Nikula authored
We lack full state readout of DSC config, which may lead to DSC enable using a config that's all zeros, failing spectacularly. Force full modeset and thus compute config at probe to get a sane state, until we implement DSC state readout. Any fastset that did appear to work with DSC at probe, worked by coincidence. [1] is an example of a change that triggered the issue on TGL DSI DSC. [1] http://patchwork.freedesktop.org/patch/msgid/20200212150102.7600-1-ville.syrjala@linux.intel.com Cc: Manasi Navare <manasi.d.navare@intel.com> Cc: Vandita Kulkarni <vandita.kulkarni@intel.com> Cc: Ville Syrjala <ville.syrjala@linux.intel.com> Cc: stable@vger.kernel.org Fixes: fbacb15e ("drm/i915/dsc: add basic hardware state readout support") Acked-by:
-
Stanislav Lisovskiy authored
TGL BIOS seems to enable both DBuf slices ocasionally, depending how many displays are connected, while i915 according to BSpec was powering on S1 DBuf slice, until a modeset was done. This was causing a brief flash during the boot as we were disabling slice, previously used by BIOS with that. To prevent this, now we are ensuring tht we are enabling _at least_ one slice, but if there are more, let's not power them off. Fixes: ff2cd863 ("drm/i915: Correctly map DBUF slices to pipes") Reviewed-by:
-
José Roberto de Souza authored
Commit 1c9d2eb2 ("drm/i915: move intel_dp_set_m_n() to encoder for DDI platforms") moved the intel_dp_set_m_n() from hsw_crtc_enable() to intel_ddi_pre_enable_dp() but it missed add it to intel_mst_pre_enable_dp() causing MST slaves to not work. v2: Not setting intel_ddi_set_dp_msa() twice for MST master Fixes: 1c9d2eb2 ("drm/i915: move intel_dp_set_m_n() to encoder for DDI platforms") Cc: Vandita Kulkarni <vandita.kulkarni@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Signed-off-by:
José Roberto de Souza <jose.souza@intel.com> Signed-off-by:
-
- 14 Feb, 2020 1 commit
-
-
Chris Wilson authored
Sometimes the error interrupt can fire even before we have seen the request go active -- in which case, we end up waiting until the timeout as the request is already completed. Double check for this case! Signed-off-by:
-
