- 06 Dec, 2019 2 commits
-
-
Yangbo Lu authored
The EEE support has not been enabled on ENETC, but it may connect to a PHY which supports EEE and advertises EEE by default, while its link partner also advertises EEE. If this happens, the PHY enters low power mode when the traffic rate is low and causes packet loss. This patch disables EEE advertisement by default for any PHY that ENETC connects to, to prevent the above unwanted outcome. Signed-off-by:
Yangbo Lu <yangbo.lu@nxp.com> Reviewed-by:
Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfDavid S. Miller authored
Alexei Starovoitov says: ==================== pull-request: bpf 2019-12-05 The following pull-request contains BPF updates for your *net* tree. We've added 6 non-merge commits during the last 1 day(s) which contain a total of 14 files changed, 116 insertions(+), 37 deletions(-). The main changes are: 1) three selftests fixes, from Stanislav. 2) one samples fix, from Jesper. 3) one verifier fix, from Yonghong. ==================== Signed-off-by:
-
- 05 Dec, 2019 26 commits
-
-
Eric Biggers authored
sock_fprog_kern::len is in units of struct sock_filter, not bytes. Fixes: 3e859adf ("compat_ioctl: unify copy-in of ppp filters") Reported-by: syzbot+eb853b51b10f1befa0b7@syzkaller.appspotmail.com Signed-off-by:
Eric Biggers <ebiggers@google.com> Reviewed-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
David S. Miller authored
Huazhong Tan says: ==================== net: hns3: fixes for -net This patchset includes misc fixes for the HNS3 ethernet driver. [patch 1/3] fixes a TX queue not restarted problem. [patch 2/3] fixes a use-after-free issue. [patch 3/3] fixes a VF ID issue for setting VF VLAN. change log: V1->V2: keeps 'ring' as parameter in hns3_nic_maybe_stop_tx() in [patch 1/3], suggestted by David. rewrites [patch 2/3]'s commit log to make it be easier to understand, suggestted by David. ==================== Signed-off-by: -
Jian Shen authored
Previously, when set VF VLAN with command "ip link set <pf name> vf <vf id> vlan <vlan id>", the VF ID 0 is handled as PF incorrectly, which should be the first VF. This patch fixes it. Fixes: 21e043cd ("net: hns3: fix set port based VLAN for PF") Signed-off-by:
Jian Shen <shenjian15@huawei.com> Signed-off-by:
Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by:
-
Yunsheng Lin authored
Currently, hns3_nic_maybe_stop_tx() uses skb_copy() to linearize a SKB if the BD num required by the SKB does not meet the hardware limitation, and it linearizes the SKB by allocating a new linearized SKB and freeing the old SKB, if hns3_nic_maybe_stop_tx() returns -EBUSY because there are no enough space in the ring to send the linearized skb to hardware, the sch_direct_xmit() still hold reference to old SKB and try to retransmit the old SKB when dev_hard_start_xmit() return TX_BUSY, which may cause use after freed problem. This patch fixes it by using __skb_linearize() to linearize the SKB in hns3_nic_maybe_stop_tx(). Fixes: 51e8439f ("net: hns3: add 8 BD limit for tx flow") Signed-off-by:
Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by:
-
Yunsheng Lin authored
There is timing window between ring_space checking and netif_stop_subqueue when transmiting a SKB, and the TX BD cleaning may be executed during the time window, which may caused TX queue not restarted problem. This patch fixes it by rechecking the ring_space after netif_stop_subqueue to make sure TX queue is restarted. Also, the ring->next_to_clean is updated even when pkts is zero, because all the TX BD cleaned may be non-SKB, so it needs to check if TX queue need to be restarted. Fixes: 76ad4f0e ("net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC") Signed-off-by:
-
Grygorii Strashko authored
Replace "select NET_SWITCHDEV" vs "depends on NET_SWITCHDEV" to fix Kconfig warning with CONFIG_COMPILE_TEST=y WARNING: unmet direct dependencies detected for NET_SWITCHDEV Depends on [n]: NET [=y] && INET [=n] Selected by [y]: - TI_CPSW_SWITCHDEV [=y] && NETDEVICES [=y] && ETHERNET [=y] && NET_VENDOR_TI [=y] && (ARCH_DAVINCI || ARCH_OMAP2PLUS || COMPILE_TEST [=y]) because TI_CPSW_SWITCHDEV blindly selects NET_SWITCHDEV even though INET is not set/enabled, while NET_SWITCHDEV depends on INET. Reported-by:
Randy Dunlap <rdunlap@infradead.org> Fixes: ed3525ed ("net: ethernet: ti: introduce cpsw switchdev based driver part 1 - dual-emac") Signed-off-by:
Grygorii Strashko <grygorii.strashko@ti.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested Signed-off-by:
-
David S. Miller authored
Julian Wiedmann says: ==================== s390/qeth: fixes 2019-12-05 please apply the following fixes to your net tree. The first two patches target the RX data path, the third fixes a memory leak when shutting down a qeth device. ==================== Signed-off-by: -
Julian Wiedmann authored
The cio layer's intparm logic does not align itself well with how qeth manages cmd IOs. When an active IO gets terminated via halt/clear, the corresponding IRQ's intparm does not reflect the cmd buffer but rather the intparm that was passed to ccw_device_halt() / ccw_device_clear(). This behaviour was recently clarified in commit b91d9e67 ("s390/cio: fix intparm documentation"). As a result, qeth_irq() currently doesn't cancel a cmd that was terminated via halt/clear. This primarily causes us to leak card->read_cmd after the qeth device is removed, since our IO path still holds a refcount for this cmd. For qeth this means that we need to keep track of which IO is pending on a device ('active_cmd'), and use this as the intparm when calling halt/clear. Otherwise qeth_irq() can't match the subsequent IRQ to its cmd buffer. Since we now keep track of the _expected_ intparm, we can also detect any mismatch; this would constitute a bug somewhere in the lower layers. In this case cancel the active cmd - we effectively "lost" the IRQ and should not expect any further notification for this IO. Fixes: 40554895 ("s390/qeth: add support for dynamically allocated cmds") Signed-off-by:
Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by:
-
Julian Wiedmann authored
When the RX path builds non-linear skbs, the packet headers can currently spill over into page fragments. Depending on the packet type and what fields we need to access in the headers, this could cause us to go past the end of skb->data. So for non-linear packets, copy precisely the length of the necessary headers ('linear_len') into skb->data. And don't copy more, upper-level protocols will peel whatever additional packet headers they need. Fixes: 4a71df50 ("qeth: new qeth device driver") Signed-off-by: -
Julian Wiedmann authored
Depending on a packet's type, the RX path needs to access fields in the packet headers and thus requires a minimum packet length. Enforce this length when building the skb. On the other hand a single runt packet is no reason to drop the whole RX buffer. So just skip it, and continue processing on the next packet. Fixes: 4a71df50 ("qeth: new qeth device driver") Signed-off-by:
-
Mian Yousaf Kaukab authored
Since commit 2b3e88ea ("net: phy: improve phy state checking") phy_start_aneg() expects phy state to be >= PHY_UP. Call phy_start() before calling phy_start_aneg() during probe so that autonegotiation is initiated. As phy_start() takes care of calling phy_start_aneg(), drop the explicit call to phy_start_aneg(). Network fails without this patch on Octeon TX. Fixes: 2b3e88ea ("net: phy: improve phy state checking") Signed-off-by:
Mian Yousaf Kaukab <ykaukab@suse.de> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
Taehee Yoo authored
hsr_dev_xmit() calls hsr_port_get_hsr() to find master node and that would return NULL if master node is not existing in the list. But hsr_dev_xmit() doesn't check return pointer so a NULL dereference could occur. Test commands: ip netns add nst ip link add veth0 type veth peer name veth1 ip link add veth2 type veth peer name veth3 ip link set veth1 netns nst ip link set veth3 netns nst ip link set veth0 up ip link set veth2 up ip link add hsr0 type hsr slave1 veth0 slave2 veth2 ip a a 192.168.100.1/24 dev hsr0 ip link set hsr0 up ip netns exec nst ip link set veth1 up ip netns exec nst ip link set veth3 up ip netns exec nst ip link add hsr1 type hsr slave1 veth1 slave2 veth3 ip netns exec nst ip a a 192.168.100.2/24 dev hsr1 ip netns exec nst ip link set hsr1 up hping3 192.168.100.2 -2 --flood & modprobe -rv hsr Splat looks like: [ 217.351122][ T1635] kasan: CONFIG_KASAN_INLINE enabled [ 217.352969][ T1635] kasan: GPF could be caused by NULL-ptr deref or user memory access [ 217.354297][ T1635] general protection fault: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN PTI [ 217.355507][ T1635] CPU: 1 PID: 1635 Comm: hping3 Not tainted 5.4.0+ #192 [ 217.356472][ T1635] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 217.357804][ T1635] RIP: 0010:hsr_dev_xmit+0x34/0x90 [hsr] [ 217.373010][ T1635] Code: 48 8d be 00 0c 00 00 be 04 00 00 00 48 83 ec 08 e8 21 be ff ff 48 8d 78 10 48 ba 00 b [ 217.376919][ T1635] RSP: 0018:ffff8880cd8af058 EFLAGS: 00010202 [ 217.377571][ T1635] RAX: 0000000000000000 RBX: ffff8880acde6840 RCX: 0000000000000002 [ 217.379465][ T1635] RDX: dffffc0000000000 RSI: 0000000000000004 RDI: 0000000000000010 [ 217.380274][ T1635] RBP: ffff8880acde6840 R08: ffffed101b440d5d R09: 0000000000000001 [ 217.381078][ T1635] R10: 0000000000000001 R11: ffffed101b440d5c R12: ffff8880bffcc000 [ 217.382023][ T1635] R13: ffff8880bffcc088 R14: 0000000000000000 R15: ffff8880ca675c00 [ 217.383094][ T1635] FS: 00007f060d9d1740(0000) GS:ffff8880da000000(0000) knlGS:0000000000000000 [ 217.384289][ T1635] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 217.385009][ T1635] CR2: 00007faf15381dd0 CR3: 00000000d523c001 CR4: 00000000000606e0 [ 217.385940][ T1635] Call Trace: [ 217.386544][ T1635] dev_hard_start_xmit+0x160/0x740 [ 217.387114][ T1635] __dev_queue_xmit+0x1961/0x2e10 [ 217.388118][ T1635] ? check_object+0xaf/0x260 [ 217.391466][ T1635] ? __alloc_skb+0xb9/0x500 [ 217.392017][ T1635] ? init_object+0x6b/0x80 [ 217.392629][ T1635] ? netdev_core_pick_tx+0x2e0/0x2e0 [ 217.393175][ T1635] ? __alloc_skb+0xb9/0x500 [ 217.393727][ T1635] ? rcu_read_lock_sched_held+0x90/0xc0 [ 217.394331][ T1635] ? rcu_read_lock_bh_held+0xa0/0xa0 [ 217.395013][ T1635] ? kasan_unpoison_shadow+0x30/0x40 [ 217.395668][ T1635] ? __kasan_kmalloc.constprop.4+0xa0/0xd0 [ 217.396280][ T1635] ? __kmalloc_node_track_caller+0x3a8/0x3f0 [ 217.399007][ T1635] ? __kasan_kmalloc.constprop.4+0xa0/0xd0 [ 217.400093][ T1635] ? __kmalloc_reserve.isra.46+0x2e/0xb0 [ 217.401118][ T1635] ? memset+0x1f/0x40 [ 217.402529][ T1635] ? __alloc_skb+0x317/0x500 [ 217.404915][ T1635] ? arp_xmit+0xca/0x2c0 [ ... ] Fixes: 311633b6 ("hsr: switch ->dellink() to ->ndo_uninit()") Acked-by:Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
Taehee Yoo <ap420073@gmail.com> Signed-off-by:
-
Yonghong Song authored
The existing fexit_bpf2bpf test covers the target progrm with callees. This patch added a test for the target program without callees. Signed-off-by:
Yonghong Song <yhs@fb.com> Signed-off-by:
Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20191205010607.177904-1-yhs@fb.com
-
Yonghong Song authored
For jited bpf program, if the subprogram count is 1, i.e., there is no callees in the program, prog->aux->func will be NULL and prog->bpf_func points to image address of the program. If there is more than one subprogram, prog->aux->func is populated, and subprogram 0 can be accessed through either prog->bpf_func or prog->aux->func[0]. Other subprograms should be accessed through prog->aux->func[subprog_id]. This patch fixed a bug in check_attach_btf_id(), where prog->aux->func[subprog_id] is used to access any subprogram which caused a segfault like below: [79162.619208] BUG: kernel NULL pointer dereference, address: 0000000000000000 ...... [79162.634255] Call Trace: [79162.634974] ? _cond_resched+0x15/0x30 [79162.635686] ? kmem_cache_alloc_trace+0x162/0x220 [79162.636398] ? selinux_bpf_prog_alloc+0x1f/0x60 [79162.637111] bpf_prog_load+0x3de/0x690 [79162.637809] __do_sys_bpf+0x105/0x1740 [79162.638488] do_syscall_64+0x5b/0x180 [79162.639147] entry_SYSCALL_64_after_hwframe+0x44/0xa9 ...... Fixes: 5b92a28a ("bpf: Support attaching tracing BPF program to other BPF programs") Reported-by:
Eelco Chaudron <echaudro@redhat.com> Signed-off-by:
-
Stanislav Fomichev authored
It looks like BPF program that handles BPF_SOCK_OPS_STATE_CB state can race with the bpf_map_lookup_elem("global_map"); I sometimes see the failures in this test and re-running helps. Since we know that we expect the callback to be called 3 times (one time for listener socket, two times for both ends of the connection), let's export this number and add simple retry logic around that. Also, let's make EXPECT_EQ() not return on failure, but continue evaluating all conditions; that should make potential debugging easier. With this fix in place I don't observe the flakiness anymore. Signed-off-by:Stanislav Fomichev <sdf@google.com> Signed-off-by:
-
Stanislav Fomichev authored
Commit 5c26f9a7 ("libbpf: Don't use cxx to test_libpf target") converted existing c++ test to c. We still want to include and link against libbpf from c++ code, so reinstate this test back, this time in a form of a selftest with a clear comment about its purpose. v2: * -lelf -> $(LDLIBS) (Andrii Nakryiko) Fixes: 5c26f9a7 ("libbpf: Don't use cxx to test_libpf target") Signed-off-by:
Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/20191202215931.248178-1-sdf@google.com
-
Stanislav Fomichev authored
Commit 40430452 ("kernfs: use 64bit inos if ino_t is 64bit") changed the way cgroup ids are exposed to the userspace. Instead of assuming fixed root id, let's query it. Fixes: 40430452 ("kernfs: use 64bit inos if ino_t is 64bit") Signed-off-by:
-
Jesper Dangaard Brouer authored
In the days of using bpf_load.c the order in which the 'maps' sections were defines in BPF side (*_kern.c) file, were used by userspace side to identify the map via using the map order as an index. In effect the order-index is created based on the order the maps sections are stored in the ELF-object file, by the LLVM compiler. This have also carried over in libbpf via API bpf_map__next(NULL, obj) to extract maps in the order libbpf parsed the ELF-object file. When BTF based maps were introduced a new section type ".maps" were created. I found that the LLVM compiler doesn't create the ".maps" sections in the order they are defined in the C-file. The order in the ELF file is based on the order the map pointer is referenced in the code. This combination of changes lead to xdp_rxq_info mixing up the map file-descriptors in userspace, resulting in very broken behaviour, but without warning the user. This patch fix issue by instead using bpf_object__find_map_by_name() to find maps via their names. (Note, this is the ELF name, which can be longer than the name the kernel retains). Fixes: be5bca44 ("samples: bpf: convert some XDP samples from bpf_load to libbpf") Fixes: 451d1dc8 ("samples: bpf: update map definition to new syntax BTF-defined map") Signed-off-by:
Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by:
Toke Høiland-Jørgensen <toke@redhat.com> Acked-by:
-
Martin Varghese authored
The skb_mpls_push was not updating ethertype of an ethernet packet if the packet was originally received from a non ARPHRD_ETHER device. In the below OVS data path flow, since the device corresponding to port 7 is an l3 device (ARPHRD_NONE) the skb_mpls_push function does not update the ethertype of the packet even though the previous push_eth action had added an ethernet header to the packet. recirc_id(0),in_port(7),eth_type(0x0800),ipv4(tos=0/0xfc,ttl=64,frag=no), actions:push_eth(src=00:00:00:00:00:00,dst=00:00:00:00:00:00), push_mpls(label=13,tc=0,ttl=64,bos=1,eth_type=0x8847),4 Fixes: 8822e270 ("net: core: move push MPLS functionality from OvS to core helper") Signed-off-by:
Martin Varghese <martin.varghese@nokia.com> Signed-off-by:
-
Alexandru Ardelean authored
In a recent change to the SPI subsystem [1], a new `delay` struct was added to replace the `delay_usecs`. This change replaces the current `delay_secs` with `delay` for this driver. The `spi_transfer_delay_exec()` function [in the SPI framework] makes sure that both `delay_usecs` & `delay` are used (in this order to preserve backwards compatibility). [1] commit bebcfd27 ("spi: introduce `delay` field for `spi_transfer` + spi_transfer_delay_exec()") Signed-off-by:
Alexandru Ardelean <alexandru.ardelean@analog.com> Signed-off-by:
-
Russell King authored
The referenced commit below allowed more than one hwmon device to be created per SFP, which is definitely not what we want. Avoid this by only creating the hwmon device just as we transition to WAITDEV state. Fixes: 139d3a21 ("net: sfp: allow modules with slow diagnostics to probe") Signed-off-by:
Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by:
-
Russell King authored
When unbinding, we don't correctly tear down the module state, leaving (for example) the hwmon registration behind. Ensure everything is properly removed by sending a remove event at unbind. Fixes: 6b0da5c9 ("net: sfp: track upstream's attachment state in state machine") Signed-off-by:
-
Shannon Nelson authored
If the user has specified their own RSS hash key, don't lose it across queue resets such as DOWN/UP, MTU change, and number of channels change. This is fixed by moving the key initialization to a little earlier in the lif creation. Also, let's clean up the RSS config a little better on the way down by setting it all to 0. Fixes: aa319881 ("ionic: Add RSS support") Signed-off-by:
Shannon Nelson <snelson@pensando.io> Signed-off-by:
-
Jonathan Lemon authored
A lockdep splat was observed when trying to remove an xdp memory model from the table since the mutex was obtained when trying to remove the entry, but not before the table walk started: Fix the splat by obtaining the lock before starting the table walk. Fixes: c3f812ce ("page_pool: do not release pool until inflight == 0.") Reported-by:
Jonathan Lemon <jonathan.lemon@gmail.com> Tested-by:
Ilias Apalodimas <ilias.apalodimas@linaro.org> Signed-off-by:
-
Aaron Conole authored
The act_ct TC module shares a common conntrack and NAT infrastructure exposed via netfilter. It's possible that a packet needs both SNAT and DNAT manipulation, due to e.g. tuple collision. Netfilter can support this because it runs through the NAT table twice - once on ingress and again after egress. The act_ct action doesn't have such capability. Like netfilter hook infrastructure, we should run through NAT twice to keep the symmetry. Fixes: b57dc7c1 ("net/sched: Introduce action ct") Signed-off-by:
Aaron Conole <aconole@redhat.com> Acked-by:
Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by:
-
Aaron Conole authored
The openvswitch module shares a common conntrack and NAT infrastructure exposed via netfilter. It's possible that a packet needs both SNAT and DNAT manipulation, due to e.g. tuple collision. Netfilter can support this because it runs through the NAT table twice - once on ingress and again after egress. The openvswitch module doesn't have such capability. Like netfilter hook infrastructure, we should run through NAT twice to keep the symmetry. Fixes: 05752523 ("openvswitch: Interface with NAT.") Signed-off-by:
-
- 04 Dec, 2019 3 commits
-
-
David S. Miller authored
Sabrina Dubroca says: ==================== net: convert ipv6_stub to ip6_dst_lookup_flow Xiumei Mu reported a bug in a VXLAN over IPsec setup: IPv6 | ESP | VXLAN Using this setup, packets go out unencrypted, because VXLAN over IPv6 gets its route from ipv6_stub->ipv6_dst_lookup (in vxlan6_get_route), which doesn't perform an XFRM lookup. This patchset first makes ip6_dst_lookup_flow suitable for some existing users of ipv6_stub->ipv6_dst_lookup by adding a 'net' argument, then converts all those users. ==================== Signed-off-by: -
Sabrina Dubroca authored
ipv6_stub uses the ip6_dst_lookup function to allow other modules to perform IPv6 lookups. However, this function skips the XFRM layer entirely. All users of ipv6_stub->ip6_dst_lookup use ip_route_output_flow (via the ip_route_output_key and ip_route_output helpers) for their IPv4 lookups, which calls xfrm_lookup_route(). This patch fixes this inconsistent behavior by switching the stub to ip6_dst_lookup_flow, which also calls xfrm_lookup_route(). This requires some changes in all the callers, as these two functions take different arguments and have different return types. Fixes: 5f81bd2e ("ipv6: export a stub for IPv6 symbols used by vxlan") Reported-by:
Xiumei Mu <xmu@redhat.com> Signed-off-by:
Sabrina Dubroca <sd@queasysnail.net> Signed-off-by:
-
Sabrina Dubroca authored
This will be used in the conversion of ipv6_stub to ip6_dst_lookup_flow, as some modules currently pass a net argument without a socket to ip6_dst_lookup. This is equivalent to commit 343d60aa ("ipv6: change ipv6_stub_impl.ipv6_dst_lookup to take net argument"). Signed-off-by:
-
- 03 Dec, 2019 9 commits
-
-
Yoshiki Komachi authored
The recent commit 5c72299f ("net: sched: cls_flower: Classify packets using port ranges") had added filtering based on port ranges to tc flower. However the commit missed necessary changes in hw-offload code, so the feature gave rise to generating incorrect offloaded flow keys in NIC. One more detailed example is below: $ tc qdisc add dev eth0 ingress $ tc filter add dev eth0 ingress protocol ip flower ip_proto tcp \ dst_port 100-200 action drop With the setup above, an exact match filter with dst_port == 0 will be installed in NIC by hw-offload. IOW, the NIC will have a rule which is equivalent to the following one. $ tc qdisc add dev eth0 ingress $ tc filter add dev eth0 ingress protocol ip flower ip_proto tcp \ dst_port 0 action drop The behavior was caused by the flow dissector which extracts packet data into the flow key in the tc flower. More specifically, regardless of exact match or specified port ranges, fl_init_dissector() set the FLOW_DISSECTOR_KEY_PORTS flag in struct flow_dissector to extract port numbers from skb in skb_flow_dissect() called by fl_classify(). Note that device drivers received the same struct flow_dissector object as used in skb_flow_dissect(). Thus, offloaded drivers could not identify which of these is used because the FLOW_DISSECTOR_KEY_PORTS flag was set to struct flow_dissector in either case. This patch adds the new FLOW_DISSECTOR_KEY_PORTS_RANGE flag and the new tp_range field in struct fl_flow_key to recognize which filters are applied to offloaded drivers. At this point, when filters based on port ranges passed to drivers, drivers return the EOPNOTSUPP error because they do not support the feature (the newly created FLOW_DISSECTOR_KEY_PORTS_RANGE flag). Fixes: 5c72299f ("net: sched: cls_flower: Classify packets using port ranges") Signed-off-by:
Yoshiki Komachi <komachi.yoshiki@gmail.com> Signed-off-by:
-
Dust Li authored
sch->q.len hasn't been set if the subqueue is a NOLOCK qdisc in mq_dump() and mqprio_dump(). Fixes: ce679e8d ("net: sched: add support for TCQ_F_NOLOCK subqueues to sch_mqprio") Signed-off-by:
Dust Li <dust.li@linux.alibaba.com> Signed-off-by:
Tony Lu <tonylu@linux.alibaba.com> Signed-off-by:
-
Eric Dumazet authored
It appears linux-4.14 stable needs a backport of commit 88f8598d ("tcp: exit if nothing to retransmit on RTO timeout") Since tcp_rtx_queue_empty() is not in pre 4.15 kernels, let's refactor tcp_retransmit_timer() to only use tcp_rtx_queue_head() I will provide to stable teams the squashed patches. Signed-off-by:
Eric Dumazet <edumazet@google.com> Cc: Willem de Bruijn <willemb@google.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by:
Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by:
-
Vladimir Oltean authored
Currently a switch driver deinit frees the regmaps, but the PTP clock is still out there, available to user space via /dev/ptpN. Any PTP operation is a ticking time bomb, since it will attempt to use the freed regmaps and thus trigger kernel panics: [ 4.291746] fsl_enetc 0000:00:00.2 eth1: error -22 setting up slave phy [ 4.291871] mscc_felix 0000:00:00.5: Failed to register DSA switch: -22 [ 4.308666] mscc_felix: probe of 0000:00:00.5 failed with error -22 [ 6.358270] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000088 [ 6.367090] Mem abort info: [ 6.369888] ESR = 0x96000046 [ 6.369891] EC = 0x25: DABT (current EL), IL = 32 bits [ 6.369892] SET = 0, FnV = 0 [ 6.369894] EA = 0, S1PTW = 0 [ 6.369895] Data abort info: [ 6.369897] ISV = 0, ISS = 0x00000046 [ 6.369899] CM = 0, WnR = 1 [ 6.369902] user pgtable: 4k pages, 48-bit VAs, pgdp=00000020d58c7000 [ 6.369904] [0000000000000088] pgd=00000020d5912003, pud=00000020d5915003, pmd=0000000000000000 [ 6.369914] Internal error: Oops: 96000046 [#1] PREEMPT SMP [ 6.420443] Modules linked in: [ 6.423506] CPU: 1 PID: 262 Comm: phc_ctl Not tainted 5.4.0-03625-gb7b2a5dadd7f #204 [ 6.431273] Hardware name: LS1028A RDB Board (DT) [ 6.435989] pstate: 40000085 (nZcv daIf -PAN -UAO) [ 6.440802] pc : css_release+0x24/0x58 [ 6.444561] lr : regmap_read+0x40/0x78 [ 6.448316] sp : ffff800010513cc0 [ 6.451636] x29: ffff800010513cc0 x28: ffff002055873040 [ 6.456963] x27: 0000000000000000 x26: 0000000000000000 [ 6.462289] x25: 0000000000000000 x24: 0000000000000000 [ 6.467617] x23: 0000000000000000 x22: 0000000000000080 [ 6.472944] x21: ffff800010513d44 x20: 0000000000000080 [ 6.478270] x19: 0000000000000000 x18: 0000000000000000 [ 6.483596] x17: 0000000000000000 x16: 0000000000000000 [ 6.488921] x15: 0000000000000000 x14: 0000000000000000 [ 6.494247] x13: 0000000000000000 x12: 0000000000000000 [ 6.499573] x11: 0000000000000000 x10: 0000000000000000 [ 6.504899] x9 : 0000000000000000 x8 : 0000000000000000 [ 6.510225] x7 : 0000000000000000 x6 : ffff800010513cf0 [ 6.515550] x5 : 0000000000000000 x4 : 0000000fffffffe0 [ 6.520876] x3 : 0000000000000088 x2 : ffff800010513d44 [ 6.526202] x1 : ffffcada668ea000 x0 : ffffcada64d8b0c0 [ 6.531528] Call trace: [ 6.533977] css_release+0x24/0x58 [ 6.537385] regmap_read+0x40/0x78 [ 6.540795] __ocelot_read_ix+0x6c/0xa0 [ 6.544641] ocelot_ptp_gettime64+0x4c/0x110 [ 6.548921] ptp_clock_gettime+0x4c/0x58 [ 6.552853] pc_clock_gettime+0x5c/0xa8 [ 6.556699] __arm64_sys_clock_gettime+0x68/0xc8 [ 6.561331] el0_svc_common.constprop.2+0x7c/0x178 [ 6.566133] el0_svc_handler+0x34/0xa0 [ 6.569891] el0_sync_handler+0x114/0x1d0 [ 6.573908] el0_sync+0x140/0x180 [ 6.577232] Code: d503201f b00119a1 91022263 b27b7be4 (f9004663) [ 6.583349] ---[ end trace d196b9b14cdae2da ]--- [ 6.587977] Kernel panic - not syncing: Fatal exception [ 6.593216] SMP: stopping secondary CPUs [ 6.597151] Kernel Offset: 0x4ada54400000 from 0xffff800010000000 [ 6.603261] PHYS_OFFSET: 0xffffd0a7c0000000 [ 6.607454] CPU features: 0x10002,21806008 [ 6.611558] Memory Limit: none And now that ocelot->ptp_clock is checked at exit, prevent a potential error where ptp_clock_register returned a pointer-encoded error, which we are keeping in the ocelot private data structure. So now, ocelot->ptp_clock is now either NULL or a valid pointer. Fixes: 4e3b0468 ("net: mscc: PTP Hardware Clock (PHC) support") Cc: Antoine Tenart <antoine.tenart@bootlin.com> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by:
-
Danit Goldberg authored
In addition to filling the node_guid and port_guid attributes, there is a need to populate VF index too, otherwise users of netlink interface will see same VF index for all VFs. Fixes: 30aad417 ("net/core: Add support for getting VF GUIDs") Signed-off-by:
Danit Goldberg <danitg@mellanox.com> Signed-off-by:
Leon Romanovsky <leonro@mellanox.com> Signed-off-by:
-
Nikolay Aleksandrov authored
We have an interesting memory leak in the bridge when it is being unregistered and is a slave to a master device which would change the mac of its slaves on unregister (e.g. bond, team). This is a very unusual setup but we do end up leaking 1 fdb entry because dev_set_mac_address() would cause the bridge to insert the new mac address into its table after all fdbs are flushed, i.e. after dellink() on the bridge has finished and we call NETDEV_UNREGISTER the bond/team would release it and will call dev_set_mac_address() to restore its original address and that in turn will add an fdb in the bridge. One fix is to check for the bridge dev's reg_state in its ndo_set_mac_address callback and return an error if the bridge is not in NETREG_REGISTERED. Easy steps to reproduce: 1. add bond in mode != A/B 2. add any slave to the bond 3. add bridge dev as a slave to the bond 4. destroy the bridge device Trace: unreferenced object 0xffff888035c4d080 (size 128): comm "ip", pid 4068, jiffies 4296209429 (age 1413.753s) hex dump (first 32 bytes): 41 1d c9 36 80 88 ff ff 00 00 00 00 00 00 00 00 A..6............ d2 19 c9 5e 3f d7 00 00 00 00 00 00 00 00 00 00 ...^?........... backtrace: [<00000000ddb525dc>] kmem_cache_alloc+0x155/0x26f [<00000000633ff1e0>] fdb_create+0x21/0x486 [bridge] [<0000000092b17e9c>] fdb_insert+0x91/0xdc [bridge] [<00000000f2a0f0ff>] br_fdb_change_mac_address+0xb3/0x175 [bridge] [<000000001de02dbd>] br_stp_change_bridge_id+0xf/0xff [bridge] [<00000000ac0e32b1>] br_set_mac_address+0x76/0x99 [bridge] [<000000006846a77f>] dev_set_mac_address+0x63/0x9b [<00000000d30738fc>] __bond_release_one+0x3f6/0x455 [bonding] [<00000000fc7ec01d>] bond_netdev_event+0x2f2/0x400 [bonding] [<00000000305d7795>] notifier_call_chain+0x38/0x56 [<0000000028885d4a>] call_netdevice_notifiers+0x1e/0x23 [<000000008279477b>] rollback_registered_many+0x353/0x6a4 [<0000000018ef753a>] unregister_netdevice_many+0x17/0x6f [<00000000ba854b7a>] rtnl_delete_link+0x3c/0x43 [<00000000adf8618d>] rtnl_dellink+0x1dc/0x20a [<000000009b6395fd>] rtnetlink_rcv_msg+0x23d/0x268 Fixes: 43598813 ("bridge: add local MAC address to forwarding table (v2)") Reported-by: syzbot+2add91c08eb181fea1bf@syzkaller.appspotmail.com Signed-off-by:Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by:
-
Dan Carpenter authored
We have to free "dev->name_node" on this error path. Fixes: ff927412 ("net: introduce name_node struct to be used in hashlist") Reported-by: syzbot+6e13e65ffbaa33757bcb@syzkaller.appspotmail.com Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
David S. Miller authored
Merge tag 'linux-can-fixes-for-5.5-20191203' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can Marc Kleine-Budde says: ==================== pull-request: can 2019-12-03 this is a pull request of 6 patches for net/master. The first two patches are against the MAINTAINERS file and adds Appana Durga Kedareswara rao as maintainer for the xilinx-can driver and Sriram Dash for the m_can (mmio) driver. The next patch is by Jouni Hogander and fixes a use-after-free in the slcan driver. Johan Hovold's patch for the ucan driver fixes the non-atomic allocation in the completion handler. The last two patches target the xilinx-can driver. The first one is by Venkatesh Yadav Abbarapu and skips the error message on deferred probe, the second one is by Srinivas Neeli and fixes the usage of the skb after can_put_echo_skb(). ==================== Signed-off-by:
-
Srinivas Neeli authored
As per linux can framework, driver not allowed to touch the skb memory after can_put_echo_skb() call. This patch fixes the same. https://www.spinics.net/lists/linux-can/msg02199.htmlSigned-off-by:
Srinivas Neeli <srinivas.neeli@xilinx.com> Reviewed-by:
Appana Durga Kedareswara Rao <appana.durga.rao@xilinx.com> Signed-off-by:
Marc Kleine-Budde <mkl@pengutronix.de>
-
