into ppc970.osdl.org:/home/torvalds/v2.6/linux

Fix name, and make sure that it's listed as a conditional
system call so that we stub it out to ENOSYS if the kernel
isn't compiled with key management support.

This patch adds support for when the service processor (the
other end of the console) resets due to a critical error; we can resume
the connection when it comes back.
Signed-off-by: Hollis Blanchard <hollisb@us.ibm.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

This patch adds support for the udbg early console interfaces
when using an HVSI console.
Signed-off-by: Hollis Blanchard <hollisb@us.ibm.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Testing revealed that the HVSI driver could oops if carrier
detect dropped mid-data transfer.

This fixes it by properly locking the hangup.
Signed-off-by: Hollis Blanchard <hollisb@us.ibm.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

The attached patch permits my key management stuff to be used on PPC, PPC64
and PPC on PPC64. Syscall numbers were allocated by Paul Mackerras.

I've updated my keyctl utility to work on PPC/PPC64 too:

	http://people.redhat.com/~dhowells/keys/keyctl.cSigned-Off-By: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

You can get all the kernel tweaking if you say yes to EMBEDDED,
which exposes questions that make sense only for experts.

- [DVB] add legacy DishNetwork support to dvb core and stv0299, thanks to Jeremy Hall
- [DVB] mt352: major cleanup, support DVICO FusionHDTV DVB-T, thanks to Christopher Pascoe
Signed-off-by: Michael Hunold <hunold@linuxtv.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

- [DVB] dibusb: update documentation for the dibusb DVB driver
- [DVB] dibusb: major overhaul of the driver, including adding new vendor and product ids from clones
Signed-off-by: Michael Hunold <hunold@linuxtv.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

- [DVB] add new driver for the Terratec CinergyT2/qanu USB2 DVB-T receiver, thanks to Daniel Mack and Holger Waechtler
Signed-off-by: Michael Hunold <hunold@linuxtv.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

- [DVB] ttusb_dec: add new 2000T type model number
- [DVB] dvb_ca_en50221: properly zero out private pointer
- [DVB] dvb-bt8xx: properly use a mutex when starting/stopping the dma engine, remove card list, it's not need anymore
- [DVB] bt878: fix hex <=> dec typo (missing 0x prefix), mark remove bt878_remove() function __devexit_p
- [DVB] dvb-core: add dvb_net_debug module parameter, remove some dead code
Signed-off-by: Michael Hunold <hunold@linuxtv.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

- [DVB] av7110: switch from stupid DEB_xx() debug macros to saner dprintk() style debugging
- [DVB] av7110: fix dvb-ttpci ca write() polling
- [DVB] budget: switch from stupid DEB_xx() debug macros to saner dprintk() style debugging
Signed-off-by: Michael Hunold <hunold@linuxtv.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

into ppc970.osdl.org:/home/torvalds/v2.6/linux

into ppc970.osdl.org:/home/torvalds/v2.6/linux

All ARM binutils versions post 2.11.90 contains an extra "feature" which
interferes with the kernel in various ways - extra "mapping symbols"
in the ELF symbol table '$a', '$t' and '$d'.  This causes two problems:

1. Since '$a' symbols have the same value as function names, this
   causes anything which uses the kallsyms infrastructure to report
   wrong values.
2. programs which parse System.map do not expect symbols to start with
   '$'.
Signed-off-by: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>

===== kernel/module.c 1.120 vs edited =====

Here's a trivial patch fixing a small spelling error in init/Kconfig in
the description of MODULE_SRCVERSION_ALL
Signed-off-by: Jesper Juhl <juhl-lkml@dif.dk>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>

The following set of patches is based loosely on the patches that
Jean-Christophe Dubois came up with for 2.6.7.  Where as the original
patches added a number of casts to unsigned char, I went the route of
making the chars be explicitly signed.  I honestly don't know which
route is better to go down.  Doing this is the bulk of the patch.  Out
of the rest of the odds 'n ends is that on Solaris, Elf32_Word is a
ulong, which means all of the printf's are unhappy (uint format, ulong
arg) for most of the typedefs.
Signed-off-by: Tom Rini <trini@kernel.crashing.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>

Moving logic to scripts/gen_initramfs_list.sh make a nice cleanup in
usr/Makefile.
A new initramfs image will be generated if the initramfs_list file changes.
This patch also fixes the bug with make O=..
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>

Also remove unused MAX_DMA define.
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Should prevent bugs like the recent piix one in the future.
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

This patch adds pci_get_legacy_ide_irq() to the PCI layer for dealing
with PCI IDE chipsets that use the "legacy mode" IRQ routing, thus
violating the normal PCI routing.  The generic implementation provides
IRQ numbers 14 and 15, and it adds a ppc64 specific one with platform
callbacks so that a plaform can provide different IRQ numbers for "legacy"
IDE.  I only fixed the amd7xxx.c driver for now, I expect people using
this interface will slowly fix their drivers (I will fix via soon as I'll
need it too, and maybe a few others).
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

From: Arjan van de Ven <arjan@fenrus.demon.nl>

ide-iops.c exports a few functions that either have no users or have no
users AND shouldn't be used by drivers; the patch below unexports them.

-EXPORT_SYMBOL(SELECT_INTERRUPT);
-EXPORT_SYMBOL(SELECT_MASK);
-EXPORT_SYMBOL(QUIRK_LIST);
-EXPORT_SYMBOL(ata_vlb_sync);

only used in the core ide code

-EXPORT_SYMBOL(ata_input_data);
-EXPORT_SYMBOL(ata_output_data);

drivers should (and do) use the hwif-> function pointer variant of these,
these functions are internal and used for setting the default hwif->
function pointers only. No need to export, in fact exporting is only asking
for accidents
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

into mars.ravnborg.org:/home/sam/bk/to-linus

From: Krzysztof Chmielewski <k.chmielewski@neostrada.pl>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Undecoded slave fixup is a oneliner patch to ide-probe to
recognize both of my Maxtor drives that appear to have the same
serial number, D3000000.

Signed-off-by: tabris@tabris.net
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Add missing ->data_phase assignment.
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

into ppc970.osdl.org:/home/torvalds/v2.6/linux

Optimize away the unconditional write to debug registers on signal delivery
path.  This is already done on x86_64.

We only need to write to dr7 if there is a breakpoint to re-enable, and 
MOVDR is a serializing instruction, which is expensive.  Getting rid of 
it gets a 33% faster signal delivery path (at least on Xeon - I didn't
test other CPUs, so your gain may vary).

[ Editors note: it's likely only that slow on Netburst.  Serializing is
  not that expensive, but it is likely that writing to %db7 invalidates
  the trace cache, which explains why it's so slow on Xeon - it's not
  just the op itself, it has to re-populate the cache all the time.
					--- Linus ]


Measured delta TSC for three paths on a 2.4GHz Xeon.

1) With unconditional write to dr7 :  800-1000 cycles
2) With conditional write to dr7   :  84-112 cycles
3) With unlikely write to dr7      :  84 cycles

Performance test using divzero microbenchmark (3 million divide by zeros):

With unconditional write:
   7.445 real / 6.136 system
   7.529 real / 6.482 system
   7.541 real / 5.974 system
   7.546 real / 6.217 system
   7.445 real / 6.167 system

With unlikely write:
   5.779 real / 4.518 system
   5.783 real / 4.591 system
   5.552 real / 4.569 system
   5.790 real / 4.528 system
   5.554 real / 4.382 system

That's about a 33% speedup - more than I expected; apparently getting rid
of the serializing instruction makes the do_signal path much faster.

Zachary Amsden (zach@vmware.com)

into ppc970.osdl.org:/home/torvalds/v2.6/linux

into ppc970.osdl.org:/home/torvalds/v2.6/linux

We decided to do this a different way.
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

into ppc970.osdl.org:/home/torvalds/v2.6/linux

In general it is not safe to do any non-ptrace wakeup of a thread in
TASK_TRACED, because the waking thread could race with a ptrace call
that could be doing things like mucking directly with its kernel stack. 

AFAIK noone has established that whatever clobberation ptrace can do to
a running thread is safe even if it will never return to user mode, so
we can't allow this even for SIGKILL.

What we _can_ safely do is make a thread switching out of TASK_TRACED
resume rather than sitting in TASK_STOPPED if it has a pending SIGKILL
or SIGCONT.  The following patch does this.

This should be sufficient for the shutdown case.  When killing all
processes, if the tracer gets killed first, the tracee goes into
TASK_STOPPED and will be woken and killed by the SIGKILL (same as
before).  If the tracee gets killed first, it gets a pending SIGKILL and
doesn't wake up immediately--but, now, when the tracer gets killed, the
tracee will then wake up to die. 

This will also fix the (same) situations that can arise now where you
have used gdb (or whatever ptrace caller), killed -9 the gdb and the
process being debugged, but still have to kill -CONT the process before
it goes away (now it should just go away either the first time or when
you kill gdb). 
Signed-off-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

This is a batch of sparse fixes for things in arch/ppc64/* and
include/asm-ppc64/*

More to come of course...
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

My latest 8250 patch prevented registration of "empty" ports (ports that
have a 0 iobase in the static table). Unfortunately, some archs seem to rely
on this, and so broke. This patch reverts that part of the patch.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

This adds support for the Maple 970FX Eval Board.  It adds the basic
arch support.  For the Maple to be fully functional, it needs a couple
more patches to be applied for IDE and Ethernet that are currently
pending with the respective maintainers of those subsystems.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

The iommu_free_table() patch broke g5 only build by adding back some
incestuous relationship between generic code and pSeries code. 

This wraps this in #ifdef as a quick fix until the original author of
the patch comes up with a better solution.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

On machines using the "ISU" mecanism for the MPIC, the new driver didn't properly
calculate the new interrupt count when an ISU was added. That would cause later on
failure to request interrupts in the offending range.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

The ppc64 PCI code, when parsing the OF tree, may end up getting empty
regions in addition to the "normal" ones for the PHB (some pSeries OF
device-tree contains weird "ranges" properties). These are harmless but
do trigger some annoying warnings during boot, so let's ignore them.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>