- 28 Jul, 2005 30 commits
-
-
James Courtier-Dutton authored
EMU10K1/EMU10K2 driver Signed-off-by: James Courtier-Dutton <James@superbug.co.uk>
-
James Courtier-Dutton authored
EMU10K1/EMU10K2 driver Signed-off-by: James Courtier-Dutton <James@superbug.co.uk>
-
James Courtier-Dutton authored
EMU10K1/EMU10K2 driver Signed-off-by: James Courtier-Dutton <James@superbug.co.uk>
-
Jaroslav Kysela authored
VIA82xx driver Reporter: Marko Kohtala <marko.kohtala@gmail.com> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
-
Clemens Ladisch authored
USB generic driver Add a quirk for the Yamaha USB MIDI device with USB ID 0x103d. Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
-
Takashi Iwai authored
Documentation,ARM,/arm/Makefile,ARM PXA2XX driver Added ARM PXA2xx AC97 driver by Nicolas Pitre (moved from alsa-driver tree). Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
Documentation,SPARC,/sparc/Makefile Add the DBRI driver on Sparcs by Martin Habets <mhabets@users.sourceforge.net> (moved from alsa-driver tree). Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
SPARC Added simple help texts to Kconfig of Sparc sound drivers. (Better texts are appreciated :) Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
Maestro3 driver - Clean up maestro3 code - Use msleep() - Don't enable hw-vol irq when not defined Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
Intel8x0 driver,AC97 Codec Fix resume of intel8x0 driver. The ac97 codec didn't restore some registers properly, and the restore of ICH4 SPDIF and SDIN settings was missing. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
CMIPCI driver Added 'Mic Boost Capture Switch' and 'Phone' switches. The existing playback switch is renamed as 'Mic Boost Playback Switch'. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
Digigram VX Pocket driver Removed unused files (dropped by the last change). Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
Documentation,PCMCIA Kconfig,Digigram VX Pocket driver - Fixed Oops with request_firmware() - Detect the card type in runtime (vxpoocket v2 or 440) - snd-vxp440 driver is merged to snd-vxpocket - Clean up the code Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
HDA Codec driver Use the new kstrdup() function instead of in-house one. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
ALSA sequencer Add the missing snd-seq-midi-emul to SND_GUS_SYNTH list. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Henrik Kretzschmar authored
ALSA Core This patch changes, adds and remove some comments, which will make now more sense and fit on a 80-char line. It also changes the order of snd_power_wait() to make the file more readable. It removes the device.c comment in front of _snd_minor, cause snd_minor has nothing to do with device.c. The both typos in the kernel-docs were corrected too. Signed-off-by: Henrik Kretzschmar <henne@nachtwindheim.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Henrik Kretzschmar authored
ALSA Core Both typos were in the kerneldocs. I splitted the snd_assert() calls in one-expression-per-call for better debugging. Signed-off-by: Henrik Kretzschmar <henne@nachtwindheim.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
HDA Codec driver Added the model entry for Acer APFV. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
Documentation,HDA Codec driver - Added a new '6stack' model for ALC880. - Fixed the typo in 6stack-digout model name. - Added description for missing models in ALSA-Configuration.txt. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Harald Welte authored
ATIIXP-modem driver I didn't actually test whether the modem works, but at least the driver loads and initializes fine. Please consider inclusion. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
Trident driver Shut up compile warnings about uninitialized variables. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Matt authored
HDA Codec driver Adds resume support to the SigmaTel HDA patch. Please apply. Signed-off-by: Matt <matt@embeddedalley.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Matt authored
HDA Codec driver Adds 6/8 channel support to the SigmaTel HDA patch. Please apply. Signed-off-by: Matt <matt@embeddedalley.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Clemens Ladisch authored
USB generic driver On the SB Audigy 2 NX, capturing with sample rates that are not a multiple of 48 kHz does not seem to work, so disable it. Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
-
Clemens Ladisch authored
USB generic driver Add support for endpoints with bInterval > 1, and decoding of the wMaxPacketSize field of high-speed endpoints. Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
-
Takashi Iwai authored
HDA Codec driver - Fixed oops with ALC880 auto-config mode - Fixed a wrong config table entry for ALC880 Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Jaroslav Kysela authored
AK4114 receiver - wake_up(&runtime->sleep) is already called in snd_pcm_post_stop() Signed-off-by: Jaroslav Kysela <perex@suse.cz>
-
Richard Henderson authored
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Linus Torvalds authored
-
Linus Torvalds authored
If we haven't configured the qla24xx driver, then the Makefile shouldn't do it for us. This also means that we can avoid the unnecessary selection of FC_ATTRS. Debugged by James Bottomley
-
- 27 Jul, 2005 10 commits
-
-
Andrew Morton authored
My fairly ordinary x86 test box gets stuck during reboot on the wait_for_completion() in ide_do_drive_cmd(): Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Linus Torvalds authored
-
Linus Torvalds authored
-
Linus Torvalds authored
-
Linus Torvalds authored
-
Marcelo Tosatti authored
8xx is not BROKEN anymore. Signed-off-by: Marcelo Tosatti <marcelo.tosatti@cyclades.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Anton Wllert authored
On 8xx, in the case where a pagefault happens for a process who's not the owner of the vma in question (ptrace for instance), the flush operation is performed via the physical address. Unfortunately, that results in a strange, unexplainable "icbi" instruction fault, most likely due to a CPU bug (see oops below). Avoid that by flushing the page via its kernel virtual address. Oops: kernel access of bad area, sig: 11 [#2] NIP: C000543C LR: C000B060 SP: C0F35DF0 REGS: c0f35d40 TRAP: 0300 Not tainted MSR: 00009022 EE: 1 PR: 0 FP: 0 ME: 1 IR/DR: 10 DAR: 00000010, DSISR: C2000000 TASK = c0ea8430[761] 'gdbserver' THREAD: c0f34000 Last syscall: 26 GPR00: 00009022 C0F35DF0 C0EA8430 00F59000 00000100 FFFFFFFF 00F58000 00000001 GPR08: C021DAEF C0270000 00009032 C0270000 22044024 10025428 01000800 00000001 GPR16: 007FFF3F 00000001 00000000 7FBC6AC0 00F61022 00000001 C0839300 C01E0000 GPR24: 00CD0889 C082F568 3000AC18 C02A7A00 C0EA15C8 00F588A9 C02ACB00 C02ACB00 NIP [c000543c] __flush_dcache_icache_phys+0x38/0x54 LR [c000b060] flush_dcache_icache_page+0x20/0x30 Call trace: [c000b154] update_mmu_cache+0x7c/0xa4 [c005ae98] do_wp_page+0x460/0x5ec [c005c8a0] handle_mm_fault+0x7cc/0x91c [c005ccec] get_user_pages+0x2fc/0x65c [c0027104] access_process_vm+0x9c/0x1d4 [c00076e0] sys_ptrace+0x240/0x4a4 [c0002bd0] ret_from_syscall+0x0/0x44 Signed-off-by: Marcelo Tosatti <marcelo.tosatti@cyclades.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Jesper Juhl authored
a) update entry in CREDITS for Jesper Juhl b) remove email address from source files so it's only listed in credits. Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Jesper Juhl authored
`gcc -W' likes to complain if the static keyword is not at the beginning of the declaration. This patch fixes all remaining occurrences of "inline static" up with "static inline" in the entire kernel tree (140 occurrences in 47 files). While making this change I came across a few lines with trailing whitespace that I also fixed up, I have also added or removed a blank line or two here and there, but there are no functional changes in the patch. Signed-off-by: Jesper Juhl <juhl-lkml@dif.dk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Michal Januszewski authored
The fb_info struct, as defined in include/linux/fb.h, contains an element that is supposed to hold the current color map: struct fb_cmap cmap; /* Current cmap */ This cmap is currently never updated when either fb_set_cmap() or fb_set_user_cmap() are called. As a result, info->cmap contains the default cmap that was set by a device driver/fbcon and a userspace application using the FBIOGETCMAP ioctl will not always get the *currently* used color map. The patch fixes this by making sure the cmap is copied to info->cmap after it is set correctly. It moves most of the code that is responsible for setting the cmap to fb_set_cmap() and out of fb_set_user_cmap() to avoid code-duplication. Signed-off-by: Michal Januszewski <spock@gentoo.org> Cc: <linux-fbdev-devel@lists.sourceforge.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-