- 30 Mar, 2018 3 commits
-
-
Xiong Zhang authored
Much error message exist in host dmesg when guest boot up with local display enabled. [ 167.680011] gvt: vgpu 1: invalid range gmadr 0x0 size 0x0 [ 167.680013] gvt: vgpu 1: invalid gma address: 0 The second error line duplicate with the first error line, so this patch remove this redundant error message and make the next error message much clearer. Signed-off-by:
Xiong Zhang <xiong.y.zhang@intel.com> Signed-off-by:
Zhenyu Wang <zhenyuw@linux.intel.com>
-
Changbin Du authored
Ditto, don't forget ggtt entries during reset. Signed-off-by:
Changbin Du <changbin.du@intel.com> Signed-off-by:
-
Changbin Du authored
We have canceled dma map for ppgtt entries. Also we need to do it for ggtt entries when them are invalidated. This can fix task hung issue as: [13517.791767] INFO: task gvt_service_thr:1081 blocked for more than 120 seconds. [13517.792584] Not tainted 4.14.15+ #3 [13517.793417] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [13517.794267] gvt_service_thr D 0 1081 2 0x80000000 [13517.795132] Call Trace: [13517.795996] ? __schedule+0x493/0x77b [13517.796859] schedule+0x79/0x82 [13517.797740] schedule_preempt_disabled+0x5/0x6 [13517.798614] __mutex_lock.isra.0+0x2b5/0x445 [13517.799504] ? __switch_to_asm+0x24/0x60 [13517.800381] ? intel_gvt_cleanup+0x10/0x10 [13517.801261] ? intel_gvt_schedule+0x19/0x2b9 [13517.802107] intel_gvt_schedule+0x19/0x2b9 [13517.802954] ? intel_gvt_cleanup+0x10/0x10 [13517.803824] gvt_service_thread+0xe3/0x10d [13517.804704] ? wait_woken+0x68/0x68 [13517.805588] kthread+0x118/0x120 [13517.806478] ? kthread_create_on_node+0x3a/0x3a [13517.807381] ? call_usermodehelper_exec_async+0x113/0x11a [13517.808307] ret_from_fork+0x35/0x40 v3: split out ggtt reset case. v2: also unmap ggtt during reset. Signed-off-by:
-
- 28 Mar, 2018 2 commits
-
-
Zhipeng Gong authored
GVT-g dispatches request to host i915 and depends on i915 notify ring interrupt mechanism to check completion of request. For now MI_USER_INTERRUPT in guest requests is passed through in GVT-g cmd parser and i915 does not use it, which causes unnecessary interrupt handling in i915. On the other hand, if several requests from guest are combined into one request in and contain MI_USER_INTERRUPT in the middle of combined request. GVT-g still has to wait on the whole request to complete to inject user interrupts to guest. This patch makes all the MI_USER_INTERRUPT nop to save some interrupt handling. Here is test result to run glmark2 on guest for 10 seconds: host master interrupts number is reduced from 16021 to 11162 host user interrupts number is reduced from 7936 to 3536 v2: - revise commit message. (Kevin) Reviewed-by:
Kevin Tian <kevin.tian@intel.com> Signed-off-by:
Zhipeng Gong <zhipeng.gong@intel.com> Signed-off-by:
-
Gustavo A. R. Silva authored
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Addresses-Coverity-ID: 1466154 ("Missing break in switch") Signed-off-by:Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by:
-
- 22 Mar, 2018 1 commit
-
-
Gerd Hoffmann authored
On unknown/unhandled ioctls the driver should return an error, so userspace knows it tried to use something unsupported. Cc: stable@vger.kernel.org Signed-off-by:
Gerd Hoffmann <kraxel@redhat.com> Reviewed-by:
Alex Williamson <alex.williamson@redhat.com> Signed-off-by:
-
- 19 Mar, 2018 6 commits
-
-
Zhenyu Wang authored
Our shadow context content is from guest but with masked control reg like CTX_CONTEXT_CONTROL, we need to make sure all settings from guest would be set when this context is on hw, this trys to force mask enable bits for all to ensure every bits setting would be effective on hw. One regression found related to once inhibit bit is set, gpu engine are working on inhibit state until MI_LOAD_REG_IMM command or context image clear inhibit bit with mask bit set to 1, and val bit set to 0. In gvt-g currently workload has the highest priority, so gvt-g workload could trigger preempt context easily, preempt context set inhibit bit, then gvt-g workload is scheduled in, but gvt-g workload shadow context image usually doesn't set inhibit mask bit, so gpu is still in inhibit state when gvt workload is running. This caused gpu hang. Suggested-by:
-
Zhi Wang authored
The PDPs of a shadow page will only be valid after a vGPU mm is pinned. So the PDPs in the shadow context should be updated then. Signed-off-by:
Zhi Wang <zhi.a.wang@intel.com> Signed-off-by:
-
Zhi Wang authored
As different OSes might handling GVT PPGTT creation/destroy notification differently during a vGPU reset. A better approach is invalidating all vGPU PPGTT mm objects during vGPU reset. Signed-off-by:
-
Changbin Du authored
Out-of-memory error must be handled correctly. Signed-off-by:
-
Colin Ian King authored
Trivial fix to spelling mistake in gvt_err error message text. Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Colin Xu authored
Reduntant message prints when: - linux guest creating. - dma-buf win10 guest boot. - xonotic stress testing in linux guest. Add below registers to default MMIO handler: 0xd00, RPM_CONFIG0 0xd40, RC6_LOCATION 0x65010, HSW_AUD_MISC_CTRL 0x6671c, 0x700a0, CUR_FBC_CTL 0x7239c, v2: - Should init i915_reg_t using uint32_t instead of _MMIO macro. (compiling errors) - Use defined offset in i915_reg.h (zhenyu) Signed-off-by:Colin Xu <colin.xu@intel.com> Signed-off-by:
-
- 16 Mar, 2018 4 commits
-
-
Tvrtko Ursulin authored
Arnd Bergman reports: """ The conditional spinlock confuses gcc into thinking the 'flags' value might contain uninitialized data: drivers/gpu/drm/i915/i915_pmu.c: In function '__i915_pmu_event_read': arch/x86/include/asm/paravirt_types.h:573:3: error: 'flags' may be used uninitialized in this function [-Werror=maybe-uninitialized] The code is correct, but it's easy to see how the compiler gets confused here. This avoids the problem by pulling the lock outside of the function into its only caller. """ On deeper look it seems this is caused by paravirt spinlocks implementation when CONFIG_PARAVIRT_DEBUG is set, which by being complicated, manages to convince gcc locked parameter can be changed externally (impossible). Work around it by removing the conditional locking parameters altogether. (It was never the most elegant code anyway.) Slight penalty we now pay is an additional irqsave spin lock/unlock cycle on the event enable path. But since enable is not a fast path, that is preferrable to the alternative solution which was doing MMIO under irqsave spinlock. Signed-off-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reported-by:
Arnd Bergmann <arnd@arndb.de> Fixes: 1fe699e3 ("drm/i915/pmu: Fix sleep under atomic in RC6 readout") Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Imre Deak <imre.deak@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: David Airlie <airlied@linux.ie> Cc: intel-gfx@lists.freedesktop.org Cc: dri-devel@lists.freedesktop.org Reviewed-by:
Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20180314080535.17490-1-tvrtko.ursulin@linux.intel.com (cherry picked from commit ad055fb8) Signed-off-by:
Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
-
Chris Wilson authored
tasklet_kill() will spin waiting for the current tasklet to be executed. However, if tasklet_disable() has been called, then the tasklet is never executed but permanently put back onto the runlist until tasklet_enable() is called. Ergo, we cannot use tasklet_kill() inside a disable/enable pair. This is the case when we call set-wedge from inside i915_reset(), and another request was submitted to us concurrent to the reset. Fixes: 963ddd63 ("drm/i915: Suspend submission tasklets around wedging") Signed-off-by:
Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180307134226.25492-6-chris@chris-wilson.co.uk (cherry picked from commit 68ad3612) Signed-off-by:
-
Chris Wilson authored
Similar to the staging around handling of engine->submit_request, we need to stop adding to the execlists->queue prior to calling engine->cancel_requests. cancel_requests will move requests from the queue onto the timeline, so if we add a request onto the queue after that point, it will be lost. Fixes: af7a8ffa ("drm/i915: Use rcu instead of stop_machine in set_wedged") Signed-off-by:
-
Jani Nikula authored
We don't want to preserve the DDI A 4 lane bit on ICL. Fixes: 3d2011cf ("drm/i915/icl: remove port A/E lane sharing limitation.") Cc: Mahesh Kumar <mahesh1.kumar@intel.com> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Reviewed-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180306104155.3526-1-jani.nikula@intel.com (cherry picked from commit 1e6aa7e5) Signed-off-by:
-
- 14 Mar, 2018 4 commits
-
-
git://anongit.freedesktop.org/drm/drm-intelDave Airlie authored
UAPI Changes: - Query uAPI interface (used for GPU topology information currently) * Mesa: https://patchwork.freedesktop.org/series/38795/ Driver Changes: - Increase PSR2 size for CNL (DK) - Avoid retraining LSPCON link unnecessarily (Ville) - Decrease request signaling latency (Chris) - GuC error capture fix (Daniele) * tag 'drm-intel-next-2018-03-08' of git://anongit.freedesktop.org/drm/drm-intel: (127 commits) drm/i915: Update DRIVER_DATE to 20180308 drm/i915: add schedule out notification of preempted but completed request drm/i915: expose rcs topology through query uAPI drm/i915: add query uAPI drm/i915: add rcs topology to error state drm/i915/debugfs: add rcs topology entry drm/i915/debugfs: reuse max slice/subslices already stored in sseu drm/i915: store all subslice masks drm/i915/guc: work around gcc-4.4.4 union initializer issue drm/i915/cnl: Add Wa_2201832410 drm/i915/icl: Gen11 forcewake support drm/i915/icl: Add Indirect Context Offset for Gen11 drm/i915/icl: Enhanced execution list support drm/i915/icl: new context descriptor support drm/i915/icl: Correctly initialize the Gen11 engines drm/i915: Assert that the request is indeed complete when signaled from irq drm/i915: Handle changing enable_fbc parameter at runtime better. drm/i915: Track whether the DP link is trained or not drm/i915: Nuke intel_dp->channel_eq_status drm/i915: Move SST DP link retraining into the ->post_hotplug() hook ...
-
git://people.freedesktop.org/~gabbayo/linuxDave Airlie authored
Major points for this pull request: - Add dGPU support for amdkfd initialization code and queue handling. It's not complete support since the GPUVM part is missing (the under debate stuff). - Enable PCIe atomics for dGPU if present - Various adjustments to the amdgpu<-->amdkfd interface for dGPUs - Refactor IOMMUv2 code to allow loading amdkfd without IOMMUv2 in the system - Add HSA process eviction code in case of system memory pressure - Various fixes and small changes * tag 'drm-amdkfd-next-2018-03-11' of git://people.freedesktop.org/~gabbayo/linux: (24 commits) uapi: Fix type used in ioctl parameter structures drm/amdkfd: Implement KFD process eviction/restore drm/amdkfd: Add GPUVM virtual address space to PDD drm/amdkfd: Remove unaligned memory access drm/amdkfd: Centralize IOMMUv2 code and make it conditional drm/amdgpu: Add submit IB function for KFD drm/amdgpu: Add GPUVM memory management functions for KFD drm/amdgpu: add amdgpu_sync_clone drm/amdgpu: Update kgd2kfd_shared_resources for dGPU support drm/amdgpu: Add KFD eviction fence drm/amdgpu: Remove unused kfd2kgd interface drm/amdgpu: Fix wrong mask in get_atc_vmid_pasid_mapping_pasid drm/amdgpu: Fix header file dependencies drm/amdgpu: Replace kgd_mem with amdgpu_bo for kernel pinned gtt mem drm/amdgpu: remove useless BUG_ONs drm/amdgpu: Enable KFD initialization on dGPUs drm/amdkfd: Add dGPU device IDs and device info drm/amdkfd: Add dGPU support to kernel_queue_init drm/amdkfd: Add dGPU support to the MQD manager drm/amdkfd: Add dGPU support to the device queue manager ...
-
git://anongit.freedesktop.org/drm/drm-miscDave Airlie authored
drm-misc-next for 4.17: UAPI Changes: plane: Add color encoding/range properties (Jyri) nouveau: Replace iturbt_709 property with color_encoding property (Ville) Core Changes: atomic: Move plane clipping into plane check helper (Ville) property: Multiple new property checks/verification (Ville) Driver Changes: rockchip: Fixes & improvements for rk3399/chromebook plus (various) sun4i: Add H3/H5 HDMI support (Jernej) i915: Add support for limited/full-range ycbcr toggling (Ville) pl111: Add bandwidth checking/limiting (Linus) Cc: Jernej Skrabec <jernej.skrabec@siol.net> Cc: Jyri Sarha <jsarha@ti.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Linus Walleij <linus.walleij@linaro.org> * tag 'drm-misc-next-2018-03-09-3' of git://anongit.freedesktop.org/drm/drm-misc: (85 commits) drm/rockchip: Don't use atomic constructs for psr drm/rockchip: analogix_dp: set psr activate/deactivate when enable/disable bridge drm/rockchip: dw_hdmi: Move HDMI vpll clock enable to bind() drm/rockchip: inno_hdmi: reorder clk_disable_unprepare call in unbind drm/rockchip: inno_hdmi: Fix error handling path. drm/rockchip: dw-mipi-dsi: Fix connector and encoder cleanup. drm/nouveau: Replace the iturbt_709 prop with the standard COLOR_ENCODING prop drm/pl111: Use max memory bandwidth for resolution drm/bridge: sii902x: Retry status read after DDI I2C drm/pl111: Handle the RealView variant separately drm/pl111: Make the default BPP a per-variant variable drm: simple_kms_helper: Fix .mode_valid() documentation bridge: Elaborate a bit on dumb VGA bridges in Kconfig drm/atomic: Add new reverse iterator over all plane state (V2) drm: Reject bad property flag combinations drm: Make property flags u32 drm/uapi: Deprecate DRM_MODE_PROP_PENDING drm: WARN when trying to add enum value > 63 to a bitmask property drm: WARN when trying add enum values to non-enum/bitmask properties drm: Reject replacing property enum values ...
-
Dave Airlie authored
This was stopping me building on ARM after last pull. Signed-off-by:Dave Airlie <airlied@redhat.com>
-
- 09 Mar, 2018 2 commits
-
-
git://people.freedesktop.org/~agd5f/linuxDave Airlie authored
More stuff for 4.17. Highlights: - More fixes for "wattman" like functionality (fine grained clk/voltage control) - Add more power profile infrastucture (context based dpm) - SR-IOV fixes - Add iomem debugging interface for use with umr - Powerplay and cgs cleanups - DC fixes and cleanups - ttm improvements - Misc cleanups all over * 'drm-next-4.17' of git://people.freedesktop.org/~agd5f/linux: (143 commits) drm/amdgpu:Always save uvd vcpu_bo in VM Mode drm/amdgpu:Correct max uvd handles drm/amdgpu: replace iova debugfs file with iomem (v3) drm/amd/display: validate plane format on primary plane drm/amdgpu: Clean sdma wptr register when only enable wptr polling drm/amd/amdgpu: re-add missing GC 9.1 and SDMA0 4.1 sh_mask header files drm/amdgpu: give warning before sleep in kiq_r/wreg drm/amdgpu: further mitigate workaround for i915 drm/amdgpu: drop gtt->adev drm/amdgpu: add amdgpu_evict_gtt debugfs entry drm/amd/pp: Add #ifdef checks for CONFIG_ACPI drm/amd/pp: fix "Delete the wrapper layer of smu_allocate/free_memory" drm/amd/pp: Drop wrapper functions for upper/lower_32_bits drm/amdgpu: Delete cgs wrapper functions for gpu memory manager drm/amd/pp: Delete the wrapper layer of smu_allocate/free_memory drm/amd/pp: Remove cgs wrapper function for temperature update Revert "drm/amd/pp: Add a pp feature mask bit for AutoWattman feature" drm/amd/pp: Add auto power profilng switch based on workloads (v2) drm/amd/pp: Revert gfx/compute profile switch sysfs drm/amd/pp: Fix sclk in highest two levels when compute on smu7 ...
-
git://linuxtv.org/pinchartl/mediaDave Airlie authored
- Convert LVDS support to a drm_bridge driver - Add DT bindings for the R8A77995 SoC - Add DT bindings and driver support for the R8A77970 SoC Note that the LVDS conversion depends on a patch series from Frank Rowand that will make it upstream through Rob Herring's tree. Frank has provided a stable branch based on v4.16-rc1 with the patches, and both Rob and I have merged it into our trees. This should thus generate no conflict when reaching -next. * 'drm/next/du' of git://linuxtv.org/pinchartl/media: dt-bindings: display: renesas: lvds: Document r8a77995 bindings dt-bindings: display: renesas: du: Document r8a77995 bindings drm: rcar-du: lvds: Add R8A77970 support drm: rcar-du: Add R8A77970 support dt-bindings: display: renesas: lvds: Document R8A77970 bindings dt-bindings: display: renesas: du: Document R8A77970 bindings drm: rcar-du: Convert LVDS encoder code to bridge driver drm: rcar-du: Fix legacy DT to create LVDS encoder nodes dt-bindings: display: renesas: Deprecate LVDS support in the DU bindings dt-bindings: display: renesas: Add R-Car LVDS encoder DT bindings of: improve reporting invalid overlay target path of: convert unittest overlay devicetree source to sugar syntax of: Documentation: of_overlay_apply() replaced by of_overlay_fdt_apply() of: change overlay apply input data from unflattened to FDT x86: devicetree: fix config option around x86_flattree_get_config()
-
- 08 Mar, 2018 17 commits
-
-
Sean Paul authored
Instead of using timer and spinlocks, use delayed_work and mutexes for rockchip psr. This allows us to make blocking calls when enabling/disabling psr (which is sort of important given we're talking over dpcd to the display). Cc: Caesar Wang <wxt@rock-chips.com> Cc: 征增 王 <wzz@rock-chips.com> Cc: Stéphane Marchesin <marcheu@chromium.org> Signed-off-by:
Sean Paul <seanpaul@chromium.org> Signed-off-by:
Thierry Escande <thierry.escande@collabora.com> Signed-off-by:
Enric Balletbo i Serra <enric.balletbo@collabora.com> Signed-off-by:
Heiko Stuebner <heiko@sntech.de> Link: https://patchwork.freedesktop.org/patch/msgid/20180305222324.5872-3-enric.balletbo@collabora.com
-
zain wang authored
There's a race between when bridge_disable and when vop_crtc_disable are called. If the flush timer triggers a new psr work between these, we will operate eDP without power shutdowned by bridge_disable. In this case, moving activate/deactivate to enable/disable bridge to avoid it. Cc: Stéphane Marchesin <marcheu@chromium.org> Signed-off-by:
zain wang <wzz@rock-chips.com> Signed-off-by:
Caesar Wang <wxt@rock-chips.com> Signed-off-by:
-
Jeffy Chen authored
The HDMI vpll clock should be enabled when bind() is called. So move the clk_prepare_enable of that clock to bind() function and add the missing clk_disable_unprepare() required in error handling path and unbind(). Fixes: 12b9f204 ("drm: bridge/dw_hdmi: add rockchip rk3288 support") Signed-off-by:
Jeffy Chen <jeffy.chen@rock-chips.com> Signed-off-by:
-
Jeffy Chen authored
In bind the clk_prepare_enable of the HDMI pclk is called before adding the i2c_adapter. So it should be the other way around in unbind, first remove the i2c_adapter and then call the clk_disable_unprepare. Fixes: 412d4ae6 ("drm/rockchip: hdmi: add Innosilicon HDMI support") Signed-off-by:
-
Jeffy Chen authored
Add missing error handling in bind(). Fixes: 412d4ae6 ("drm/rockchip: hdmi: add Innosilicon HDMI support") Signed-off-by:
-
Jeffy Chen authored
In bind()'s error handling path call destroy functions instead of cleanup functions for encoder and connector and reorder to match how is called in bind(). In unbind() call the connector and encoder destroy functions. Signed-off-by:
-
Ville Syrjälä authored
Replace the ad-hoc iturbt_709 property with the new standard COLOR_ENCODING property. Compiles, but not tested. v2: Fix typos (Ilia) Cc: Daniel Vetter <daniel@ffwll.ch> Cc: nouveau@lists.freedesktop.org Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Ilia Mirkin <imirkin@alum.mit.edu> Signed-off-by:
Ilia Mirkin <imirkin@alum.mit.edu> Acked-by: Ben Skeggs <bskeggs@redhat.com> #irc
-
Joonas Lahtinen authored
Signed-off-by: -
https://github.com/intel/gvt-linuxJoonas Lahtinen authored
gvt-next-2018-03-08 - big refactor for shadow ppgtt (Changbin) - KBL context save/restore via LRI cmd (Weinan) - misc smatch fixes (Zhenyu) - Properly unmap dma for guest page (Changbin) - other misc fixes (Xiong, etc.) Signed-off-by:
-
Weinan Li authored
There is one corner case missing schedule out notification of the preempted request. The preempted request is just completed when preemption happen, then it will be canceled and won't be resubmitted later, GVT-g will lost the schedule out notification. Here add schedule out notification if found the preempted request has been completed. v2: - refine description, add completed check and notification in execlists_cancel_port_requests. (Chris) v3: - use ternary confitional, remove local variable. (Tvrtko) Cc: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
Weinan Li <weinan.z.li@intel.com> Signed-off-by:
-
Lionel Landwerlin authored
With the introduction of asymmetric slices in CNL, we cannot rely on the previous SUBSLICE_MASK getparam to tell userspace what subslices are available. Here we introduce a more detailed way of querying the Gen's GPU topology that doesn't aggregate numbers. This is essential for monitoring parts of the GPU with the OA unit, because counters need to be normalized to the number of EUs/subslices/slices. The current aggregated numbers like EU_TOTAL do not gives us sufficient information. The Mesa series making use of this API is : https://patchwork.freedesktop.org/series/38795/ As a bonus we can draw representations of the GPU : https://imgur.com/a/vuqpa v2: Rename uapi struct s/_mask/_info/ (Tvrtko) Report max_slice/subslice/eus_per_subslice rather than strides (Tvrtko) Add uapi macros to read data from *_info structs (Tvrtko) v3: Use !!(v & DRM_I915_BIT()) for uapi macros instead of custom shifts (Tvrtko) v4: factorize query item writting (Tvrtko) tweak uapi struct/define names (Tvrtko) v5: Replace ALIGN() macro (Chris) v6: Updated uapi comments (Tvrtko) Moved flags != 0 checks into vfuncs (Tvrtko) v7: Use access_ok() before copying anything, to avoid overflows (Chris) Switch BUG_ON() to GEM_WARN_ON() (Tvrtko) v8: Tweak uapi comments style to match the coding style (Lionel) v9: Fix error in comment about computation of enabled subslice (Tvrtko) v10: Fix/update comments in uAPI (Sagar) v11: Drop drm_i915_query_(slice|subslice|eu)_info in favor of a single drm_i915_query_topology_info (Joonas) v12: Add subslice_stride/eu_stride in drm_i915_query_topology_info (Joonas) v13: Fix comment in uAPI (Joonas) Signed-off-by:Lionel Landwerlin <lionel.g.landwerlin@intel.com> Acked-by:
-
Lionel Landwerlin authored
There are a number of information that are readable from hardware registers and that we would like to make accessible to userspace. One particular example is the topology of the execution units (how are execution units grouped in subslices and slices and also which ones have been fused off for die recovery). At the moment the GET_PARAM ioctl covers some basic needs, but generally is only able to return a single value for each defined parameter. This is a bit problematic with topology descriptions which are array/maps of available units. This change introduces a new ioctl that can deal with requests to fill structures of potentially variable lengths. The user is expected fill a query with length fields set at 0 on the first call, the kernel then sets the length fields to the their expected values. A second call to the kernel with length fields at their expected values will trigger a copy of the data to the pointed memory locations. The scope of this uAPI is only to provide information to userspace, not to allow configuration of the device. v2: Simplify dispatcher code iteration (Tvrtko) Tweak uapi drm_i915_query_item structure (Tvrtko) v3: Rename pad fields into flags (Chris) Return error on flags field != 0 (Chris) Only copy length back to userspace in drm_i915_query_item (Chris) v4: Use array of functions instead of switch (Chris) v5: More comments in uapi (Tvrtko) Return query item errors in length field (All) v6: Tweak uapi comments style to match the coding style (Lionel) v7: Add i915_query.h (Joonas) v8: (Lionel) Change the behavior of the item iterator to report invalid queries into the query item rather than stopping the iteration. This enables userspace applications to query newer items on older kernels and only have failure on the items that are not supported. v9: Edit copyright headers (Joonas) v10: Typos & comments in uapi (Joonas) Signed-off-by: -
Lionel Landwerlin authored
This might be useful information for developers looking at an error state. v2: Place topology towards the end of the error state (Chris) v3: Reuse common printing code (Michal) v4: Make this a one-liner (Chris) Signed-off-by:
-
Lionel Landwerlin authored
While the end goal is to make this information available to userspace through a new ioctl, there is no reason we can't display it in a human readable fashion through debugfs. slice0: 3 subslice(s) (0x7): subslice0: 8 EUs (0xff) subslice1: 8 EUs (0xff) subslice2: 8 EUs (0xff) subslice3: 0 EUs (0x0) slice1: 3 subslice(s) (0x7): subslice0: 8 EUs (0xff) subslice1: 8 EUs (0xff) subslice2: 8 EUs (0xff) subslice3: 0 EUs (0x0) slice2: 3 subslice(s) (0x7): subslice0: 8 EUs (0xff) subslice1: 8 EUs (0xff) subslice2: 8 EUs (0xff) subslice3: 0 EUs (0x0) v2: Reformat debugfs printing (Tvrtko) Use the new EU mask helper (Tvrtko) v3: Move printing code to intel_device_info.c to be shared with error state (Michal) v4: Bump u8 to u16 when using sseu_get_eus() (Lionel) Suggested-by: -
Lionel Landwerlin authored
Now that we have that information in topology fields, let's just reuse it. v2: Style tweaks (Tvrtko) Signed-off-by:
-
Lionel Landwerlin authored
Up to now, subslice mask was assumed to be uniform across slices. But starting with Cannonlake, slices can be asymmetric (for example slice0 has different number of subslices as slice1+). This change stores all subslices masks for all slices rather than having a single mask that applies to all slices. v2: Rework how we store total numbers in sseu_dev_info (Tvrtko) Fix CHV eu masks, was reading disabled as enabled (Tvrtko) Readability changes (Tvrtko) Add EU index helper (Tvrtko) v3: Turn ALIGN(v, 8) / 8 into DIV_ROUND_UP(v, BITS_PER_BYTE) (Tvrtko) Reuse sseu_eu_idx() for setting eu_mask on CHV (Tvrtko) Reformat debug prints for subslices (Tvrtko) v4: Change eu_mask helper into sseu_set_eus() (Tvrtko) v5: With Haswell reporting masks & counts, bump sseu_*_eus() functions to use u16 (Lionel) v6: Fix sseu_get_eus() for > 8 EUs per subslice (Lionel) v7: Change debugfs enabels for number of subslices per slice, will need a small igt/pm_sseu change (Lionel) Drop subslice_total field from sseu_dev_info, rely on sseu_subslice_total() to recompute the value instead (Lionel) v8: Remove unused function compute_subslice_total() (Lionel) Signed-off-by: -
Andrew Morton authored
gcc-4.4.4 has problems with initalizers of anon unions. drivers/gpu/drm/i915/intel_guc_log.c: In function 'guc_log_control': drivers/gpu/drm/i915/intel_guc_log.c:64: error: unknown field 'logging_enabled' specified in initializer Work around this. Fixes: 35fe703c ("drm/i915/guc: Change values for i915_guc_log_control") Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Sagar Arun Kamble <sagar.a.kamble@intel.com> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
- 07 Mar, 2018 1 commit
-
-
Rodrigo Vivi authored
"Clock gating bug in GWL may not clear barrier state when an EOT is received, causing a hang the next time that barrier is used." HSDES: 2201832410 Cc: Rafael Antognolli <rafael.antognolli@intel.com> Signed-off-by:
Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by:
Rafael Antognolli <rafael.antognolli@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180307220912.3681-1-rodrigo.vivi@intel.com
-
