Here comes a patch by Takeru Komoriya which fixes the way the it87
driver handles temperature sensor types selection.

* Use the same values as the CVS driver and sensors program.
* Better comments.
* Get rid of the old setting method (already gone in CVS).
* Handle invalid values correctly.

Here is a patch for the w83781d driver that prevents register bits from
being arbitrary changed when we force temp2/3 to comparator mode. Keith
Duthie had been reporting various problems with that driver and finally
found that this arbitrary change was the cause of them. He also tested
this patch, which he confirmed to work.

This patch brings the name field of adm1021.c, it87.c and via686a.c in
conformance with the defined standard ("all lowercase, as simple as the
driver name itself").

> Oh nevermind, that's just a dumb driver.  It's doing a release_region
> on memory it didn't get.  Stupid, stupid, stupid...

While we're at it, what about fixing two other drivers that obviously
have the same problem?

(BTW I didn't get an oops as I tried reproducing the problem, only a
"Trying to free nonexistent resource" in dmesg.)

BTW, I found something to be fixed in i2c-core:

Thanks to Dave Jones for pointing this out.

Following is an updated patch to add support for using the GPIO lines
on an Intel IXP42x SOC for I2C.  Changes since last patch include:

- Cleanups as per Jean Delvare's comments

- Rename functions as 42x instead of 425

- Change the comments at the top of the file to better reflect the
  purpose of this driver.

This code has been tested with the eeprom client driver and worked
w/o any problems.

VIDEO_BT848 selects I2C_ALGOBIT.

Here is a port for the lm80 driver, which supports LM80 chips by
National Semiconductor. The port is mostly the work of Tiago Sousa,
which I reviewed and polished as necessary.

I forgot to give the credit he deserves to James Bolt for testing the
latest w83l785ts driver changes. Here is a patch that fixes that.

I just noticed that I forgot to enable debugging in the new fscher
driver. Sorry for that. Here is a patch that fixes this.

The Voodoo3 i2c bus has either a bt869 tv-out chip, or also a tv tuner,
decoder and msp3400.  Without I2C_ADAP_CLASS_TV_ANALOG, the i2c clients
would have to do a strcmp of the adapter name to distiguish between the
i2c and ddc adapters.  Yes, they should be able to tell if the chip at a
given address is what they are looking for, but in the case of the v3tv
module, which is the v4l device, in the 2.4 kerenl I've got it set to
create a dummy client, and the strcmp is the only way to distinguish the
i2c from the ddc.  In the 2.6 kernel, class can be defined, simplifying
things for the v3tv module.

into home.osdl.org:/home/torvalds/v2.5/linux

My "__ide_dma_off()" cleanup uncovered some code that shouldn't be compiled
when CONFIG_BLK_DEV_IDEDMA=n.  Fix it and kill a warning in setup-pci.c.

Noticed by Martin Diehl <lists@mdiehl.de>.

into nuts.davemloft.net:/disk1/BK/sparc-2.6

into debian.org:/usr/src/kernel/sparc-2.6

The platinum framebuffer is repeated twice. Removed one of them.

There's an incorrect redefinition extern/static in prep_pci.

Just remove it.

From: Tom Rini <trini@kernel.crashing.org>

Hello.  The following patch is all that is required to get current 2.6 to
compile and work on MPC82xx platforms.

From: Tom Rini <trini@kernel.crashing.org>

Replace MSR_, which is gone now, with the value it used to be.  Required to
get the MPC82xx platforms compiling again.

This fixes the build of "allyesconfig", old and new radeonfb's would
collide on some symbols.

It results in serial console getting initialised really late and the
suggested workaround is broken according to Keith. 

Cset exclude: akpm@osdl.org|ChangeSet|20040213234712|28554

The rtasd kernel thread would exit before daemoniz'ing itself if
RTAS wasn't present (or if allocation of the buffer failed), thus
leaving a zombie. This patch fixes it (and remove #if 0'ed code)

Move ide-dma.c:__ide_dma_off() outside of #ifdef CONFIG_BLK_DEV_IDEDMA_PCI,
so it can be used for all DMA capable hosts.  Remove ide_hwif_t->ide_dma_off.

->ide_dma_count() was introduced in kernel 2.5.35 and was meant to add support
for host FIFO counters (for VDMA), but is only a wrapper for ->ide_dma_begin()
(even for siimage.c b/c SIIMAGE_VIRTUAL_DMAPIO is undefined).

Moreover it should be possible to add VDMA code directly to ->ide_dma_begin().

Use __ide_dma_{good,bad}_drive() directly and remove these wrappers.

I see only pros of removing OnStream support:
 - SCSI osst.c driver is actively maintained by Willem Riede <wrlk@riede.org>
 - there is no functionality loss (OnStream IDE drives don't support DSC)
 - ide-tape.c driver is too ugly & complicated even without OnStream support
 - long term benefits (2.7.x plans on unifying storage drivers)

From: Willem Riede <wrlk@riede.org>

From: Glenn Wurster <gwurster@scs.carleton.ca>

This fixes a small merge error in aty128fb resulting in a compile
failure. 

From: James Morris <jmorris@redhat.com>

The patch below fixes an error handling flaw, where we need to return a
Netfilter verdict from the function rather than a standard error code.

From: James Morris <jmorris@redhat.com>

The avc_init function is only called during kernel init, so it can be
marked with __init.

From: Stephen Smalley <sds@epoch.ncsc.mil>

This patch changes the mode bits on the selinuxfs enforce node so that
non-root processes can read it.  This is necessary to allow non-root
userspace policy enforcers to check the enforcing flag upon a permission
failure as well.  A process must still have the appropriate SELinux
permission in order to read the node.

From: James Morris <jmorris@redhat.com>

devfs is passing an empty string to do_mount when it expects a page.