- 24 Jul, 2020 30 commits
-
-
Christoph Hellwig authored
Rework the remaining setsockopt code to pass a sockptr_t instead of a plain user pointer. This removes the last remaining set_fs(KERNEL_DS) outside of architecture specific code. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Stefan Schmidt <stefan@datenfreihafen.org> [ieee802154] Acked-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Christoph Hellwig authored
Pass a sockptr_t to prepare for set_fs-less handling of the kernel pointer from bpf-cgroup. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Christoph Hellwig authored
Pass a sockptr_t to prepare for set_fs-less handling of the kernel pointer from bpf-cgroup. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Christoph Hellwig authored
Pass a sockptr_t to prepare for set_fs-less handling of the kernel pointer from bpf-cgroup. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Christoph Hellwig authored
Pass a sockptr_t to prepare for set_fs-less handling of the kernel pointer from bpf-cgroup. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Christoph Hellwig authored
Factour out a helper to set the IPv6 option headers from do_ipv6_setsockopt. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Christoph Hellwig authored
Pass a sockptr_t to prepare for set_fs-less handling of the kernel pointer from bpf-cgroup. Note that the get case is pretty weird in that it actually copies data back to userspace from setsockopt. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Christoph Hellwig authored
Split ipv6_flowlabel_opt into a subfunction for each action and a small wrapper. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Christoph Hellwig authored
Pass a sockptr_t to prepare for set_fs-less handling of the kernel pointer from bpf-cgroup. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Christoph Hellwig authored
Pass a sockptr_t to prepare for set_fs-less handling of the kernel pointer from bpf-cgroup. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Christoph Hellwig authored
Use the sockptr_t type to merge the versions. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Christoph Hellwig authored
Pass a sockptr_t to prepare for set_fs-less handling of the kernel pointer from bpf-cgroup. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Christoph Hellwig authored
This is mostly to prepare for cleaning up the callers, as bpfilter by design can't handle kernel pointers. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Christoph Hellwig authored
Pass a sockptr_t to prepare for set_fs-less handling of the kernel pointer from bpf-cgroup. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Christoph Hellwig authored
Pass a sockptr_t to prepare for set_fs-less handling of the kernel pointer from bpf-cgroup. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Christoph Hellwig authored
Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Christoph Hellwig authored
Pass a sockptr_t to prepare for set_fs-less handling of the kernel pointer from bpf-cgroup. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Christoph Hellwig authored
Pass a sockptr_t to prepare for set_fs-less handling of the kernel pointer from bpf-cgroup. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Christoph Hellwig authored
Pass a sockptr_t to prepare for set_fs-less handling of the kernel pointer from bpf-cgroup. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Christoph Hellwig authored
Pass a sockptr_t to prepare for set_fs-less handling of the kernel pointer from bpf-cgroup. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Christoph Hellwig authored
Pass a sockptr_t to prepare for set_fs-less handling of the kernel pointer from bpf-cgroup. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Christoph Hellwig authored
Add a uptr_t type that can hold a pointer to either a user or kernel memory region, and simply helpers to copy to and from it. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Christoph Hellwig authored
The bpfilter user mode helper processes the optval address using process_vm_readv. Don't send it kernel addresses fed under set_fs(KERNEL_DS) as that won't work. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Christoph Hellwig authored
Split __bpfilter_process_sockopt into a low-level send request routine and the actual setsockopt hook to split the init time ping from the actual setsockopt processing. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Christoph Hellwig authored
The __user doesn't make sense when casting to an integer type, just switch to a uintptr_t cast which also removes the need for the __force. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Ariel Levkovich says: ==================== TC datapath hash api Hash based packet classification allows user to set up rules that provide load balancing of traffic across multiple vports and for ECMP path selection while keeping the number of rule at minimum. Instead of matching on exact flow spec, which requires a rule per flow, user can define rules based on a their hash value and distribute the flows to different buckets. The number of rules in this case will be constant and equal to the number of buckets. The series introduces an extention to the cls flower classifier and allows user to add rules that match on the hash value that is stored in skb->hash while assuming the value was set prior to the classification. Setting the skb->hash can be done in various ways and is not defined in this series - for example: 1. By the device driver upon processing an rx packet. 2. Using tc action bpf with a program which computes and sets the skb->hash value. $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 2 proto ip \ flower hash 0x0/0xf \ action mirred egress redirect dev ens1f0_1 $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 2 proto ip \ flower hash 0x1/0xf \ action mirred egress redirect dev ens1f0_2 v3 -> v4: *Drop hash setting code leaving only the classidication parts. Setting the hash will be possible via existing tc action bpf. v2 -> v3: *Split hash algorithm option into 2 different actions. Asym_l4 available via act_skbedit and bpf via new act_hash. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ariel Levkovich authored
Adding new cls flower keys for hash value and hash mask and dissect the hash info from the skb into the flow key towards flow classication. Signed-off-by: Ariel Levkovich <lariel@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ariel Levkovich authored
Retreive a hash value from the SKB and store it in the dissector key for future matching. Signed-off-by: Ariel Levkovich <lariel@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Chi Song authored
An imbalanced TX indirection table causes netvsc to have low performance. This table is created and managed during runtime. To help better diagnose performance issues caused by imbalanced tables, it needs make TX indirection tables visible. Because TX indirection table is driver specified information, so display it via ethtool register dump. Signed-off-by: Chi Song <chisong@microsoft.com> Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David Ahern authored
Randy reported compile failure when CONFIG_SYSCTL is not set/enabled: ERROR: modpost: "sysctl_vals" [drivers/net/vrf.ko] undefined! Fix by splitting out the sysctl init and cleanup into helpers that can be set to do nothing when CONFIG_SYSCTL is disabled. In addition, move vrf_strict_mode and vrf_strict_mode_change to above vrf_shared_table_handler (code move only) and wrap all of it in the ifdef CONFIG_SYSCTL. Update the strict mode tests to check for the existence of the /proc/sys entry. Fixes: 33306f1a ("vrf: add sysctl parameter for strict mode") Cc: Andrea Mayer <andrea.mayer@uniroma2.it> Reported-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: David Ahern <dsahern@kernel.org> Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 23 Jul, 2020 10 commits
-
-
Vladimir Oltean authored
The purpose of this override is to give the user an indication of what the number of the CPU port is (in DSA, the CPU port is a hardware implementation detail and not a network interface capable of traffic). However, it has always failed (by design) at providing this information to the user in a reliable fashion. Prior to commit 3369afba ("net: Call into DSA netdevice_ops wrappers"), the behavior was to only override this callback if it was not provided by the DSA master. That was its first failure: if the DSA master itself was a DSA port or a switchdev, then the user would not see the number of the CPU port in /sys/class/net/eth0/phys_port_name, but the number of the DSA master port within its respective physical switch. But that was actually ok in a way. The commit mentioned above changed that behavior, and now overrides the master's ndo_get_phys_port_name unconditionally. That comes with problems of its own, which are worse in a way. The idea is that it's typical for switchdev users to have udev rules for consistent interface naming. These are based, among other things, on the phys_port_name attribute. If we let the DSA switch at the bottom to start randomly overriding ndo_get_phys_port_name with its own CPU port, we basically lose any predictability in interface naming, or even uniqueness, for that matter. So, there are reasons to let DSA override the master's callback (to provide a consistent interface, a number which has a clear meaning and must not be interpreted according to context), and there are reasons to not let DSA override it (it breaks udev matching for the DSA master). But, there is an alternative method for users to retrieve the number of the CPU port of each DSA switch in the system: $ devlink port pci/0000:00:00.5/0: type eth netdev swp0 flavour physical port 0 pci/0000:00:00.5/2: type eth netdev swp2 flavour physical port 2 pci/0000:00:00.5/4: type notset flavour cpu port 4 spi/spi2.0/0: type eth netdev sw0p0 flavour physical port 0 spi/spi2.0/1: type eth netdev sw0p1 flavour physical port 1 spi/spi2.0/2: type eth netdev sw0p2 flavour physical port 2 spi/spi2.0/4: type notset flavour cpu port 4 spi/spi2.1/0: type eth netdev sw1p0 flavour physical port 0 spi/spi2.1/1: type eth netdev sw1p1 flavour physical port 1 spi/spi2.1/2: type eth netdev sw1p2 flavour physical port 2 spi/spi2.1/3: type eth netdev sw1p3 flavour physical port 3 spi/spi2.1/4: type notset flavour cpu port 4 So remove this duplicated, unreliable and troublesome method. From this patch on, the phys_port_name attribute of the DSA master will only contain information about itself (if at all). If the users need reliable information about the CPU port they're probably using devlink anyway. Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Acked-by: florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Vishal Kulkarni authored
In this test, loopback pkt is created and sent on default queue. The packet goes until the Multi Port Switch (MPS) just before the MAC and based on the specified channel number, it either goes outside the wire on one of the physical ports or looped back to Rx path by MPS. In this case, we're specifying loopback channel, instead of physical ports, so the packet gets looped back to Rx path, instead of getting transmitted on the wire. v3: - Modify commit message to include test details. v2: - Add only loopback self-test. Signed-off-by: Vishal Kulkarni <vishal@chelsio.com> Acked-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Tom Parkin says: ==================== l2tp: further checkpatch.pl cleanups l2tp hasn't been kept up to date with the static analysis checks offered by checkpatch.pl. This patchset builds on the series "l2tp: cleanup checkpatch.pl warnings". It includes small refactoring changes which improve code quality and resolve a subset of the checkpatch warnings for the l2tp codebase. ==================== Reviewed-by: James Chapman <jchapman@katalix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Tom Parkin authored
Passing "sizeof(struct blah)" in kzalloc calls is less readable, potentially prone to future bugs if the type of the pointer is changed, and triggers checkpatch warnings. Tweak the kzalloc calls in l2tp which use this form to avoid the warning. Signed-off-by: Tom Parkin <tparkin@katalix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Tom Parkin authored
When creating an L2TP tunnel using the netlink API, userspace must either pass a socket FD for the tunnel to use (for managed tunnels), or specify the tunnel source/destination address (for unmanaged tunnels). Since source/destination addresses may be AF_INET or AF_INET6, the l2tp netlink code has conditionally compiled blocks to support IPv6. Rather than embedding these directly into l2tp_nl_cmd_tunnel_create (where it makes the code difficult to read and confuses checkpatch to boot) split the handling of address-related attributes into a separate function. Signed-off-by: Tom Parkin <tparkin@katalix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Tom Parkin authored
l2tp_nl_tunnel_send has conditionally compiled code to support AF_INET6, which makes the code difficult to follow and triggers checkpatch warnings. Split the code out into functions to handle the AF_INET v.s. AF_INET6 cases, which both improves readability and resolves the checkpatch warnings. Signed-off-by: Tom Parkin <tparkin@katalix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Tom Parkin authored
checkpatch warns about indentation and brace balancing around the conditionally compiled code for AF_INET6 support in l2tp_dfs_seq_tunnel_show. By adding another check on the socket address type we can make the code more readable while removing the checkpatch warning. Signed-off-by: Tom Parkin <tparkin@katalix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Tom Parkin authored
These checks are all simple and don't benefit from extra braces to clarify intent. Remove them for easier-reading code. Signed-off-by: Tom Parkin <tparkin@katalix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Tom Parkin authored
checkpatch warns about comparisons to NULL, e.g. CHECK: Comparison to NULL could be written "!rt" #474: FILE: net/l2tp/l2tp_ip.c:474: + if (rt == NULL) { These sort of comparisons are generally clearer and more readable the way checkpatch suggests, so update l2tp accordingly. Signed-off-by: Tom Parkin <tparkin@katalix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Miaohe Lin authored
Use eth_zero_addr() to clear mac address insetad of memset(). Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-