Pull fbdev updates from Bartlomiej Zolnierkiewicz:
 "This time the pull request is really small.

  The most notable changes are fixing fbcon to not cause crash on
  unregister_framebuffer() operation when there is more than one
  framebuffer, adding config option to center the bootup logo and making
  FB_BACKLIGHT config option tristate (which in turn uncovered incorrect
  FB_BACKLIGHT usage by DRM's nouveau driver).

  Summary:

   - fix fbcon to not cause crash on unregister_framebuffer() when there
     is more than one framebuffer (Noralf Trønnes)

   - improve support for small rotated displays (Peter Rosin)

   - fix probe failure handling in udlfb driver (Dan Carpenter)

   - add config option to center the bootup logo (Peter Rosin)

   - make FB_BACKLIGHT config option tristate (Rob Clark)

   - remove superfluous HAS_DMA dependency for goldfishfb driver (Geert
     Uytterhoeven)

   - misc fixes (Alexey Khoroshilov, YueHaibing, Colin Ian King, Lubomir
     Rintel)

   - misc cleanups (Yangtao Li, Wen Yang)

  also there is DRM's nouveau driver fix for wrong FB_BACKLIGHT config
  option usage (FB_BACKLIGHT is for internal fbdev subsystem use only)"

* tag 'fbdev-v4.21' of git://github.com/bzolnier/linux:
  drm/nouveau: fix incorrect FB_BACKLIGHT usage in Kconfig
  fbdev: fbcon: Fix unregister crash when more than one framebuffer
  fbdev: Remove depends on HAS_DMA in case of platform dependency
  pxa168fb: trivial typo fix
  fbdev: fsl-diu: remove redundant null check on cmap
  fbdev: omap2: omapfb: convert to DEFINE_SHOW_ATTRIBUTE
  fbdev: uvesafb: fix spelling mistake "memoery" -> "memory"
  fbdev: fbmem: add config option to center the bootup logo
  fbdev: fbmem: make fb_show_logo_line return the end instead of the height
  video: fbdev: pxafb: Fix "WARNING: invalid free of devm_ allocated data"
  fbdev: fbmem: behave better with small rotated displays and many CPUs
  video: clps711x-fb: release disp device node in probe()
  fbdev: make FB_BACKLIGHT a tristate
  udlfb: fix some inconsistent NULL checking

Pull i2c updates from Wolfram Sang:
 "I2C has only driver updates for you this time.

  Mostly new IDs/DT compatibles, also SPDX conversions, small cleanups.
  STM32F7 got FastMode+ and PM support, Axxia some reliabilty
  improvements"

* 'i2c/for-5.0' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (26 commits)
  i2c: Add Actions Semiconductor Owl family S700 I2C support
  dt-bindings: i2c: Add S700 support for Actions Semi Soc's
  i2c: ismt: Add support for Intel Cedar Fork
  i2c: tegra: Switch to SPDX identifier
  i2c: tegra: Add missing kerneldoc for some fields
  i2c: tegra: Cleanup kerneldoc comments
  i2c: axxia: support sequence command mode
  dt-bindings: i2c: rcar: Add r8a774c0 support
  dt-bindings: i2c: sh_mobile: Add r8a774c0 support
  i2c: sh_mobile: Add support for r8a774c0 (RZ/G2E)
  i2c: i2c-cros-ec-tunnel: Switch to SPDX identifier.
  i2c: powermac: Use of_node_name_eq for node name comparisons
  i2c-axxia: check for error conditions first
  i2c-axxia: dedicated function to set client addr
  dt-bindings: i2c: Use correct vendor prefix for Atmel
  i2c: tegra: replace spin_lock_irqsave with spin_lock in ISR
  eeprom: at24: add support for 24c2048
  dt-bindings: eeprom: at24: add "atmel,24c2048" compatible string
  i2c: i2c-stm32f7: add PM Runtime support
  i2c: sh_mobile: add support for r8a77990 (R-Car E3)
  ...

Pull PCI updates from Bjorn Helgaas:

 - Remove unused lists from ASPM pcie_link_state (Frederick Lawler)

 - Fix Broadcom CNB20LE host bridge unintended sign extension (Colin Ian
   King)

 - Expand Kconfig "PF" acronyms (Randy Dunlap)

 - Update MAINTAINERS for arch/x86/kernel/early-quirks.c (Bjorn Helgaas)

 - Add missing include to drivers/pci.h (Alexandru Gagniuc)

 - Override Synopsys USB 3.x HAPS device class so dwc3-haps can claim it
   instead of xhci (Thinh Nguyen)

 - Clean up P2PDMA documentation (Randy Dunlap)

 - Allow runtime PM even if driver doesn't supply callbacks (Jarkko
   Nikula)

 - Remove status check after submitting Switchtec MRPC Firmware Download
   commands to avoid Completion Timeouts (Kelvin Cao)

 - Set Switchtec coherent DMA mask to allow 64-bit DMA (Boris Glimcher)

 - Fix Switchtec SWITCHTEC_IOCTL_EVENT_IDX_ALL flag overwrite issue
   (Joey Zhang)

 - Enable write combining for Switchtec MRPC Input buffers (Kelvin Cao)

 - Add Switchtec MRPC DMA mode support (Wesley Sheng)

 - Skip VF scanning on powerpc, which does this in firmware (Sebastian
   Ott)

 - Add Amlogic Meson PCIe controller driver and DT bindings (Yue Wang)

 - Constify histb dw_pcie_host_ops structure (Julia Lawall)

 - Support multiple power domains for imx6 (Leonard Crestez)

 - Constify layerscape driver data (Stefan Agner)

 - Update imx6 Kconfig to allow imx6 PCIe in imx7 kernel (Trent Piepho)

 - Support armada8k GPIO reset (Baruch Siach)

 - Support suspend/resume support on imx6 (Leonard Crestez)

 - Don't hard-code DesignWare DBI/ATU offst (Stephen Warren)

 - Skip i.MX6 PHY setup on i.MX7D (Andrey Smirnov)

 - Remove Jianguo Sun from HiSilicon STB maintainers (Lorenzo Pieralisi)

 - Mask DesignWare interrupts instead of disabling them to avoid lost
   interrupts (Marc Zyngier)

 - Add locking when acking DesignWare interrupts (Marc Zyngier)

 - Ack DesignWare interrupts in the proper callbacks (Marc Zyngier)

 - Use devm resource parser in mediatek (Honghui Zhang)

 - Remove unused mediatek "num-lanes" DT property (Honghui Zhang)

 - Add UniPhier PCIe controller driver and DT bindings (Kunihiko
   Hayashi)

 - Enable MSI for imx6 downstream components (Richard Zhu)

* tag 'pci-v4.21-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (40 commits)
  PCI: imx: Enable MSI from downstream components
  s390/pci: skip VF scanning
  PCI/IOV: Add flag so platforms can skip VF scanning
  PCI/IOV: Factor out sriov_add_vfs()
  PCI: uniphier: Add UniPhier PCIe host controller support
  dt-bindings: PCI: Add UniPhier PCIe host controller description
  PCI: amlogic: Add the Amlogic Meson PCIe controller driver
  dt-bindings: PCI: meson: add DT bindings for Amlogic Meson PCIe controller
  arm64: dts: mt7622: Remove un-used property for PCIe
  arm: dts: mt7623: Remove un-used property for PCIe
  dt-bindings: PCI: MediaTek: Remove un-used property
  PCI: mediatek: Remove un-used variant in struct mtk_pcie_port
  MAINTAINERS: Remove Jianguo Sun from HiSilicon STB DWC entry
  PCI: dwc: Don't hard-code DBI/ATU offset
  PCI: imx: Add imx6sx suspend/resume support
  PCI: armada8k: Add support for gpio controlled reset signal
  PCI: dwc: Adjust Kconfig to allow IMX6 PCIe host on IMX7
  PCI: dwc: layerscape: Constify driver data
  PCI: imx: Add multi-pd support
  PCI: Override Synopsys USB 3.x HAPS device class
  ...

Pull HID updates from Jiri Kosina:

 - high-resolution scrolling support that gracefully handles differences
   between MS and Logitech implementations in HW, from Peter Hutterer
   and Harry Cutts

 - MSI IRQ support for intel-ish driver, from Song Hongyan

 - support for new hardware (Cougar 700K, Odys Winbook 13, ASUS FX503VD,
   ASUS T101HA) from Daniel M. Lambea, Hans de Goede and Aleix Roca
   Nonell

 - other small assorted fixups

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: (22 commits)
  HID: i2c-hid: Add Odys Winbook 13 to descriptor override
  HID: lenovo: Add checks to fix of_led_classdev_register
  HID: intel-ish-hid: add MSI interrupt support
  HID: debug: Change to use DEFINE_SHOW_ATTRIBUTE macro
  HID: doc: fix wrong data structure reference for UHID_OUTPUT
  HID: intel-ish-hid: fixes incorrect error handling
  HID: asus: Add support for the ASUS T101HA keyboard dock
  HID: logitech: Use LDJ_DEVICE macro for existing Logitech mice
  HID: logitech: Enable high-resolution scrolling on Logitech mice
  HID: logitech: Add function to enable HID++ 1.0 "scrolling acceleration"
  HID: logitech-hidpp: fix typo, hiddpp to hidpp
  HID: input: use the Resolution Multiplier for high-resolution scrolling
  HID: core: process the Resolution Multiplier
  HID: core: store the collections as a basic tree
  Input: add `REL_WHEEL_HI_RES` and `REL_HWHEEL_HI_RES`
  HID: input: support Microsoft wireless radio control hotkey
  HID: use macros in IS_INPUT_APPLICATION
  HID: asus: Add support for the ASUS FX503VD laptop
  HID: asus: Add event handler to catch unmapped Asus Vendor UsagePage codes
  HID: cougar: Add support for Cougar 700K Gaming Keyboard
  ...

Pull livepatch update from Jiri Kosina:
 "Return value checking fixup in livepatching samples, from Nicholas Mc
  Guire"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/livepatching:
  livepatch: check kzalloc return values

Pull thermal management updates from Zhang Rui:

 - Add locking for cooling device sysfs attribute in case the cooling
   device state is changed by userspace and thermal framework
   simultaneously. (Thara Gopinath)

 - Fix a problem that passive cooling is reset improperly after system
   suspend/resume. (Wei Wang)

 - Cleanup the driver/thermal/ directory by moving intel and qcom
   platform specific drivers to platform specific sub-directories. (Amit
   Kucheria)

 - Some trivial cleanups. (Lukasz Luba, Wolfram Sang)

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux:
  thermal/intel: fixup for Kconfig string parsing tightening up
  drivers: thermal: Move QCOM_SPMI_TEMP_ALARM into the qcom subdir
  drivers: thermal: Move various drivers for intel platforms into a subdir
  thermal: Fix locking in cooling device sysfs update cur_state
  Thermal: do not clear passive state during system sleep
  thermal: zx2967_thermal: simplify getting .driver_data
  thermal: st: st_thermal: simplify getting .driver_data
  thermal: spear_thermal: simplify getting .driver_data
  thermal: rockchip_thermal: simplify getting .driver_data
  thermal: int340x_thermal: int3400_thermal: simplify getting .driver_data
  thermal: remove unused function parameter

Pull thermal SoC updates from Eduardo Valentin:

 - Tegra DT binding documentation for Tegra194

 - Armada now supports ap806 and cp110

 - RCAR thermal now supports R8A774C0 and R8A77990

 - Fixes on thermal_hwmon, IMX, generic-ADC, ST, RCAR, Broadcom,
   Uniphier, QCOM, Tegra, PowerClamp, and Armada thermal drivers.

* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal: (22 commits)
  thermal: generic-adc: Fix adc to temp interpolation
  thermal: rcar_thermal: add R8A77990 support
  dt-bindings: thermal: rcar-thermal: add R8A77990 support
  thermal: rcar_thermal: add R8A774C0 support
  dt-bindings: thermal: rcar-thermal: add R8A774C0 support
  dt-bindings: cp110: document the thermal interrupt capabilities
  dt-bindings: ap806: document the thermal interrupt capabilities
  MAINTAINERS: thermal: add entry for Marvell MVEBU thermal driver
  thermal: armada: add overheat interrupt support
  thermal: st: fix Makefile typo
  thermal: uniphier: Convert to SPDX identifier
  thermal/intel_powerclamp: Change to use DEFINE_SHOW_ATTRIBUTE macro
  thermal: tegra: soctherm: Change to use DEFINE_SHOW_ATTRIBUTE macro
  dt-bindings: thermal: tegra-bpmp: Add Tegra194 support
  thermal: imx: save one condition block for normal case of nvmem initialization
  thermal: imx: fix for dependency on cpu-freq
  thermal: tsens: qcom: do not create duplicate regmap debugfs entries
  thermal: armada: Use PTR_ERR_OR_ZERO in armada_thermal_probe_legacy()
  dt-bindings: thermal: rcar-gen3-thermal: All variants use 3 interrupts
  thermal: broadcom: use devm_thermal_zone_of_sensor_register
  ...

Pull ftrace sh build fix from Steven Rostedt:
 "It appears that the zero-day bot did find a bug in my sh build.

  And that I didn't have the bad code in my config file when I cross
  compiled it, although there are a few other errors in sh that makes it
  not build for me, I missed that I added one more"

* tag 'trace-v4.21-1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  sh: ftrace: Fix missing parenthesis in WARN_ON()

Pull smb3 fixes from Steve French:
 "Three fixes, one for stable, one adds the (most secure) SMB3.1.1
  dialect to default list requested"

* tag '4.21-smb3-small-fixes' of git://git.samba.org/sfrench/cifs-2.6:
  smb3: add smb3.1.1 to default dialect list
  cifs: fix confusing warning message on reconnect
  smb3: fix large reads on encrypted connections

Pull iomap maintainer update from Darrick Wong:
 "Christoph Hellwig and I have decided to take responsibility for the fs
  iomap code rather than let it languish further"

* tag 'iomap-4.21-merge-3' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  iomap: take responsibility for the filesystem iomap code

Pull xfs fixlets from Darrick Wong:
 "Remove a couple of unnecessary local variables"

* tag 'xfs-4.21-merge-3' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  xfs: xfs_fsops: drop useless LIST_HEAD
  xfs: xfs_buf: drop useless LIST_HEAD

Pull ceph updates from Ilya Dryomov:
 "A fairly quiet round: a couple of messenger performance improvements
  from myself and a few cap handling fixes from Zheng"

* tag 'ceph-for-4.21-rc1' of git://github.com/ceph/ceph-client:
  ceph: don't encode inode pathes into reconnect message
  ceph: update wanted caps after resuming stale session
  ceph: skip updating 'wanted' caps if caps are already issued
  ceph: don't request excl caps when mount is readonly
  ceph: don't update importing cap's mseq when handing cap export
  libceph: switch more to bool in ceph_tcp_sendmsg()
  libceph: use MSG_SENDPAGE_NOTLAST with ceph_tcp_sendpage()
  libceph: use sock_no_sendpage() as a fallback in ceph_tcp_sendpage()
  libceph: drop last_piece logic from write_partial_message_data()
  ceph: remove redundant assignment
  ceph: cleanup splice_dentry()

Fixes build break on most ARM/ARM64 defconfigs:

  lib/genalloc.c: In function 'gen_pool_add_virt':
  lib/genalloc.c:190:10: error: implicit declaration of function 'vzalloc_node'; did you mean 'kzalloc_node'?
  lib/genalloc.c:190:8: warning: assignment to 'struct gen_pool_chunk *' from 'int' makes pointer from integer without a cast [-Wint-conversion]
  lib/genalloc.c: In function 'gen_pool_destroy':
  lib/genalloc.c:254:3: error: implicit declaration of function 'vfree'; did you mean 'kfree'?

Fixes: 6862d2fc ('lib/genalloc.c: use vzalloc_node() to allocate the bitmap')
Cc: Huang Shijie <sjhuang@iluvatar.ai>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Alexey Skidanov <alexey.skidanov@intel.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull vfs mount API prep from Al Viro:
 "Mount API prereqs.

  Mostly that's LSM mount options cleanups. There are several minor
  fixes in there, but nothing earth-shattering (leaks on failure exits,
  mostly)"

* 'mount.part1' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (27 commits)
  mount_fs: suppress MAC on MS_SUBMOUNT as well as MS_KERNMOUNT
  smack: rewrite smack_sb_eat_lsm_opts()
  smack: get rid of match_token()
  smack: take the guts of smack_parse_opts_str() into a new helper
  LSM: new method: ->sb_add_mnt_opt()
  selinux: rewrite selinux_sb_eat_lsm_opts()
  selinux: regularize Opt_... names a bit
  selinux: switch away from match_token()
  selinux: new helper - selinux_add_opt()
  LSM: bury struct security_mnt_opts
  smack: switch to private smack_mnt_opts
  selinux: switch to private struct selinux_mnt_opts
  LSM: hide struct security_mnt_opts from any generic code
  selinux: kill selinux_sb_get_mnt_opts()
  LSM: turn sb_eat_lsm_opts() into a method
  nfs_remount(): don't leak, don't ignore LSM options quietly
  btrfs: sanitize security_mnt_opts use
  selinux; don't open-code a loop in sb_finish_set_opts()
  LSM: split ->sb_set_mnt_opts() out of ->sb_kern_mount()
  new helper: security_sb_eat_lsm_opts()
  ...

Pull trivial vfs updates from Al Viro:
 "A few cleanups + Neil's namespace_unlock() optimization"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  exec: make prepare_bprm_creds static
  genheaders: %-<width>s had been there since v6; %-*s - since v7
  VFS: use synchronize_rcu_expedited() in namespace_unlock()
  iov_iter: reduce code duplication

Pull MIPS fixes from Paul Burton:
 "A few early MIPS fixes for 4.21:

   - The Broadcom BCM63xx platform sees a fix for resetting the BCM6368
     ethernet switch, and the removal of a platform device we've never
     had a driver for.

   - The Alchemy platform sees a few fixes for bitrot that occurred
     within the past few cycles.

   - We now enable vectored interrupt support for the MediaTek MT7620
     SoC, which makes sense since they're supported by the SoC but in
     this case also works around a bug relating to the location of
     exception vectors when using a recent version of U-Boot.

   - The atomic64_fetch_*_relaxed() family of functions see a fix for a
     regression in MIPS64 kernels since v4.19.

   - Cavium Octeon III CN7xxx systems will now disable their RGMII
     interfaces rather than attempt to enable them & warn about the lack
     of support for doing so, as they did since initial CN7xxx ethernet
     support was added in v4.7.

   - The Microsemi/Microchip MSCC SoCs gain a MAINTAINERS entry.

   - .mailmap now provides consistency for Dengcheng Zhu's name &
     current email address"

* tag 'mips_fixes_4.21_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
  MIPS: OCTEON: mark RGMII interface disabled on OCTEON III
  MIPS: Fix a R10000_LLSC_WAR logic in atomic.h
  MIPS: BCM63XX: drop unused and broken DSP platform device
  mailmap: Update name spelling and email for Dengcheng Zhu
  MIPS: ralink: Select CONFIG_CPU_MIPSR2_IRQ_VI on MT7620/8
  MAINTAINERS: Add a maintainer for MSCC MIPS SoCs
  MIPS: Alchemy: update dma masks for devboard devices
  MIPS: Alchemy: update cpu-feature-overrides
  MIPS: Alchemy: drop DB1000 IrDA support bits
  MIPS: alchemy: cpu_all_mask is forbidden for clock event devices
  MIPS: BCM63XX: fix switch core reset on BCM6368

Pull powerpc fixes from Michael Ellerman:
 "A fix for the recent access_ok() change, which broke the build. We
  recently added a use of type in order to squash a warning elsewhere
  about type being unused.

  A handful of other minor build fixes, and one defconfig update.

  Thanks to: Christian Lamparter, Christophe Leroy, Diana Craciun,
  Mathieu Malaterre"

* tag 'powerpc-4.21-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc: Drop use of 'type' from access_ok()
  KVM: PPC: Book3S HV: radix: Fix uninitialized var build error
  powerpc/configs: Add PPC4xx_OCM to ppc40x_defconfig
  powerpc/4xx/ocm: Fix phys_addr_t printf warnings
  powerpc/4xx/ocm: Fix compilation error due to PAGE_KERNEL usage
  powerpc/fsl: Fixed warning: orphan section `__btb_flush_fixup'

Pull parisc fix from Helge Deller:
 "Fix boot issues with a series of parisc servers since kernel 4.20.

  Remapping kernel text with set_kernel_text_rw() missed to remap from
  lowest up until the highest huge-page aligned kernel text addresss"

* 'parisc-4.21-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
  parisc: Remap hugepage-aligned pages in set_kernel_text_rw()

Pull h8300 fix from Yoshinori Sato:
 "Build problem fix"

* tag 'for-4.21' of git://git.sourceforge.jp/gitroot/uclinux-h8/linux:
  h8300: pci: Remove local declaration of pcibios_penalize_isa_irq

Pull more ARM SoC updates from Olof Johansson:
 "A few updates that we merged late but are low risk for regressions for
  other platforms (and a few other straggling patches):

   - I mis-tagged the 'drivers' branch, and missed 3 patches. Merged in
     here. They're for a driver for the PL353 SRAM controller and a
     build fix for the qualcomm scm driver.

   - A new platform, RDA Micro RDA8810PL (Cortex-A5 w/ integrated
     Vivante GPU, 256MB RAM, Wifi). This includes some acked
     platform-specific drivers (serial, etc). This also include DTs for
     two boards with this SoC, OrangePi 2G and OrangePi i86.

   - i.MX8 is another new platform (NXP, 4x Cortex-A53 + Cortex-M4, 4K
     video playback offload). This is the first i.MX 64-bit SoC.

   - Some minor updates to Samsung boards (adding a few peripherals in
     DTs).

   - Small rework for SMP bootup on STi platforms.

   - A couple of TEE driver fixes.

   - A couple of new config options (bcm2835 thermal, Uniphier MDMAC)
     enabled in defconfigs"

* tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (27 commits)
  ARM: multi_v7_defconfig: enable CONFIG_UNIPHIER_MDMAC
  arm64: defconfig: Re-enable bcm2835-thermal driver
  MAINTAINERS: Add entry for RDA Micro SoC architecture
  tty: serial: Add RDA8810PL UART driver
  ARM: dts: rda8810pl: Add interrupt support for UART
  dt-bindings: serial: Document RDA Micro UART
  ARM: dts: rda8810pl: Add timer support
  ARM: dts: Add devicetree for OrangePi i96 board
  ARM: dts: Add devicetree for OrangePi 2G IoT board
  ARM: dts: Add devicetree for RDA8810PL SoC
  ARM: Prepare RDA8810PL SoC
  dt-bindings: arm: Document RDA8810PL and reference boards
  dt-bindings: Add RDA Micro vendor prefix
  ARM: sti: remove pen_release and boot_lock
  arm64: dts: exynos: Add Bluetooth chip to TM2(e) boards
  arm64: dts: imx8mq-evk: enable watchdog
  arm64: dts: imx8mq: add watchdog devices
  MAINTAINERS: add i.MX8 DT path to i.MX architecture
  arm64: add support for i.MX8M EVK board
  arm64: add basic DTS for i.MX8MQ
  ...

Pull arm64 fixes from Will Deacon:
 "I'm safely chained back up to my desk, so please pull these arm64
  fixes for -rc1 that address some issues that cropped up during the
  merge window:

   - Prevent KASLR from mapping the top page of the virtual address
     space

   - Fix device-tree probing of SDEI driver

   - Fix incorrect register offset definition in Hisilicon DDRC PMU
     driver

   - Fix compilation issue with older binutils not liking unsigned
     immediates

   - Fix uapi headers so that libc can provide its own sigcontext
     definition

   - Fix handling of private compat syscalls

   - Hook up compat io_pgetevents() syscall for 32-bit tasks

   - Cleanup to arm64 Makefile (including now to avoid silly conflicts)"

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64: compat: Hook up io_pgetevents() for 32-bit tasks
  arm64: compat: Don't pull syscall number from regs in arm_compat_syscall
  arm64: compat: Avoid sending SIGILL for unallocated syscall numbers
  arm64/sve: Disentangle <uapi/asm/ptrace.h> from <uapi/asm/sigcontext.h>
  arm64/sve: ptrace: Fix SVE_PT_REGS_OFFSET definition
  drivers/perf: hisi: Fixup one DDRC PMU register offset
  arm64: replace arm64-obj-* in Makefile with obj-*
  arm64: kaslr: Reserve size of ARM64_MEMSTART_ALIGN in linear region
  firmware: arm_sdei: Fix DT platform device creation
  firmware: arm_sdei: fix wrong of_node_put() in init function
  arm64: entry: remove unused register aliases
  arm64: smp: Fix compilation error

Pull ARM updates from Russell King:
 "Included in this update:

   - Florian Fainelli noticed that userspace segfaults caused by the
     lack of kernel-userspace helpers was hard to diagnose; we now issue
     a warning when userspace tries to use the helpers but the kernel
     has them disabled.

   - Ben Dooks wants compatibility for the old ATAG serial number with
     DT systems.

   - Some cleanup of assembly by Nicolas Pitre.

   - User accessors optimisation from Vincent Whitchurch.

   - More robust kdump on SMP systems from Yufen Wang.

   - Sebastian Andrzej Siewior noticed problems with the SMP "boot_lock"
     on RT kernels, and so we convert the Versatile series of platforms
     to use a raw spinlock instead, consolidating the Versatile
     implementation. We entirely remove the boot_lock on OMAP systems,
     where it's unnecessary. Further patches for other systems will be
     submitted for the following merge window.

   - Start switching old StrongARM-11x0 systems to use gpiolib rather
     than their private GPIO implementation - mostly PCMCIA bits.

   - ARM Kconfig cleanups.

   - Cleanup a mostly harmless mistake in the recent Spectre patch in
     4.20 (which had the effect that data that can be placed into the
     init sections was incorrectly always placed in the rodata section)"

* tag 'for-4.21' of git://git.armlinux.org.uk/~rmk/linux-arm: (25 commits)
  ARM: omap2: remove unnecessary boot_lock
  ARM: versatile: rename and comment SMP implementation
  ARM: versatile: convert boot_lock to raw
  ARM: vexpress/realview: consolidate immitation CPU hotplug
  ARM: fix the cockup in the previous patch
  ARM: sa1100/cerf: switch to using gpio_led_register_device()
  ARM: sa1100/assabet: switch to using gpio leds
  ARM: sa1100/assabet: add gpio keys support for right-hand two buttons
  ARM: sa1111: remove legacy GPIO interfaces
  pcmcia: sa1100*: remove redundant bvd1/bvd2 setting
  ARM: pxa/lubbock: switch PCMCIA to MAX1600 library
  ARM: pxa/mainstone: switch PCMCIA to MAX1600 library and gpiod APIs
  ARM: sa1100/neponset: switch PCMCIA to MAX1600 library and gpiod APIs
  ARM: sa1100/jornada720: switch PCMCIA to gpiod APIs
  pcmcia: add MAX1600 library
  ARM: sa1100: explicitly register sa11x0-pcmcia devices
  ARM: 8813/1: Make aligned 2-byte getuser()/putuser() atomic on ARMv6+
  ARM: 8812/1: Optimise copy_{from/to}_user for !CPU_USE_DOMAINS
  ARM: 8811/1: always list both ldrd/strd registers explicitly
  ARM: 8808/1: kexec:offline panic_smp_self_stop CPU
  ...

Pull arch/csky updates from Guo Ren:
 "Here are three main features (cpu_hotplug, basic ftrace, basic perf)
  and some bugfixes:

  Features:
   - Add CPU-hotplug support for SMP
   - Add ftrace with function trace and function graph trace
   - Add Perf support
   - Add EM_CSKY_OLD 39
   - optimize kernel panic print.
   - remove syscall_exit_work

  Bugfixes:
   - fix abiv2 mmap(... O_SYNC) failure
   - fix gdb coredump error
   - remove vdsp implement for kernel
   - fix qemu failure to bootup sometimes
   - fix ftrace call-graph panic
   - fix device tree node reference leak
   - remove meaningless header-y
   - fix save hi,lo,dspcr regs in switch_stack
   - remove unused members in processor.h"

* tag 'csky-for-linus-4.21' of git://github.com/c-sky/csky-linux:
  csky: Add perf support for C-SKY
  csky: Add EM_CSKY_OLD 39
  clocksource/drivers/c-sky: fixup ftrace call-graph panic
  csky: ftrace call graph supported.
  csky: basic ftrace supported
  csky: remove unused members in processor.h
  csky: optimize kernel panic print.
  csky: stacktrace supported.
  csky: CPU-hotplug supported for SMP
  clocksource/drivers/c-sky: fixup qemu fail to bootup sometimes.
  csky: fixup save hi,lo,dspcr regs in switch_stack.
  csky: remove syscall_exit_work
  csky: fixup remove vdsp implement for kernel.
  csky: bugfix gdb coredump error.
  csky: fixup abiv2 mmap(... O_SYNC) failed.
  csky: define syscall_get_arch()
  elf-em.h: add EM_CSKY
  csky: remove meaningless header-y
  csky: Don't leak device tree node reference

Merge more updates from Andrew Morton:

 - procfs updates

 - various misc bits

 - lib/ updates

 - epoll updates

 - autofs

 - fatfs

 - a few more MM bits

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (58 commits)
  mm/page_io.c: fix polled swap page in
  checkpatch: add Co-developed-by to signature tags
  docs: fix Co-Developed-by docs
  drivers/base/platform.c: kmemleak ignore a known leak
  fs: don't open code lru_to_page()
  fs/: remove caller signal_pending branch predictions
  mm/: remove caller signal_pending branch predictions
  arch/arc/mm/fault.c: remove caller signal_pending_branch predictions
  kernel/sched/: remove caller signal_pending branch predictions
  kernel/locking/mutex.c: remove caller signal_pending branch predictions
  mm: select HAVE_MOVE_PMD on x86 for faster mremap
  mm: speed up mremap by 20x on large regions
  mm: treewide: remove unused address argument from pte_alloc functions
  initramfs: cleanup incomplete rootfs
  scripts/gdb: fix lx-version string output
  kernel/kcov.c: mark write_comp_data() as notrace
  kernel/sysctl: add panic_print into sysctl
  panic: add options to print system info when panic happens
  bfs: extra sanity checking and static inode bitmap
  exec: separate MM_ANONPAGES and RLIMIT_STACK accounting
  ...

Some non-generic ia64 configs don't build swiotlb, and thus should not
pull in the generic non-coherent DMA infrastructure.

Fixes: 68c60834 ("swiotlb: remove dma_mark_clean")
Reported-by: Tony Luck <tony.luck@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This has been broken forever, and nobody ever really noticed because
it's purely a performance issue.

Long long ago, in commit 6175ddf0 ("x86: Clean up mem*io functions")
Brian Gerst simplified the memory copies to and from iomem, since on
x86, the instructions to access iomem are exactly the same as the
regular instructions.

That is technically true, and things worked, and nobody said anything.
Besides, back then the regular memcpy was pretty simple and worked fine.

Nobody noticed except for David Laight, that is.  David has a testing a
TLP monitor he was writing for an FPGA, and has been occasionally
complaining about how memcpy_toio() writes things one byte at a time.

Which is completely unacceptable from a performance standpoint, even if
it happens to technically work.

The reason it's writing one byte at a time is because while it's
technically true that accesses to iomem are the same as accesses to
regular memory on x86, the _granularity_ (and ordering) of accesses
matter to iomem in ways that they don't matter to regular cached memory.

In particular, when ERMS is set, we default to using "rep movsb" for
larger memory copies.  That is indeed perfectly fine for real memory,
since the whole point is that the CPU is going to do cacheline
optimizations and executes the memory copy efficiently for cached
memory.

With iomem? Not so much.  With iomem, "rep movsb" will indeed work, but
it will copy things one byte at a time. Slowly and ponderously.

Now, originally, back in 2010 when commit 6175ddf0 was done, we
didn't use ERMS, and this was much less noticeable.

Our normal memcpy() was simpler in other ways too.

Because in fact, it's not just about using the string instructions.  Our
memcpy() these days does things like "read and write overlapping values"
to handle the last bytes of the copy.  Again, for normal memory,
overlapping accesses isn't an issue.  For iomem? It can be.

So this re-introduces the specialized memcpy_toio(), memcpy_fromio() and
memset_io() functions.  It doesn't particularly optimize them, but it
tries to at least not be horrid, or do overlapping accesses.  In fact,
this uses the existing __inline_memcpy() function that we still had
lying around that uses our very traditional "rep movsl" loop followed by
movsw/movsb for the final bytes.

Somebody may decide to try to improve on it, but if we've gone almost a
decade with only one person really ever noticing and complaining, maybe
it's not worth worrying about further, once it's not _completely_ broken?
Reported-by: David Laight <David.Laight@aculab.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This actually enables the __put_user_goto() functionality in
unsafe_put_user().

For an example of the effect of this, this is the code generated for the

        unsafe_put_user(signo, &infop->si_signo, Efault);

in the waitid() system call:

	movl %ecx,(%rbx)        # signo, MEM[(struct __large_struct *)_2]

It's just one single store instruction, along with generating an
exception table entry pointing to the Efault label case in case that
instruction faults.

Before, we would generate this:

	xorl    %edx, %edx
	movl %ecx,(%rbx)        # signo, MEM[(struct __large_struct *)_3]
        testl   %edx, %edx
        jne     .L309

with the exception table generated for that 'mov' instruction causing us
to jump to a stub that set %edx to -EFAULT and then jumped back to the
'testl' instruction.

So not only do we now get rid of the extra code in the normal sequence,
we also avoid unnecessarily keeping that extra error register live
across it all.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This is finally the actual reason for the odd error handling in the
"unsafe_get/put_user()" functions, introduced over three years ago.

Using a "jump to error label" interface is somewhat odd, but very
convenient as a programming interface, and more importantly, it fits
very well with simply making the target be the exception handler address
directly from the inline asm.

The reason it took over three years to actually do this? We need "asm
goto" support for it, which only became the default on x86 last year.
It's now been a year that we've forced asm goto support (see commit
e501ce95 "x86: Force asm-goto"), and so let's just do it here too.

[ Side note: this commit was originally done back in 2016. The above
  commentary about timing is obviously about it only now getting merged
  into my real upstream tree     - Linus ]

Sadly, gcc still only supports "asm goto" with asms that do not have any
outputs, so we are limited to only the put_user case for this.  Maybe in
several more years we can do the get_user case too.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The alternative coding patch for parisc in kernel 4.20 broke booting
machines with PA8500-PA8700 CPUs. The problem is, that for such machines
the parisc kernel automatically utilizes huge pages to access kernel
text code, but the set_kernel_text_rw() function, which is used shortly
before applying any alternative patches, didn't used the correctly
hugepage-aligned addresses to remap the kernel text read-writeable.

Fixes: 3847dab7 ("parisc: Add alternative coding infrastructure")
Cc: <stable@vger.kernel.org>	[4.20]
Signed-off-by: Helge Deller <deller@gmx.de>

Merge in a few missing patches from the pull request (my copy of the
branch was behind the staged version in linux-next).

* next/drivers:
  memory: pl353: Add driver for arm pl353 static memory controller
  dt-bindings: memory: Add pl353 smc controller devicetree binding information
  firmware: qcom: scm: fix compilation error when disabled
Signed-off-by: Olof Johansson <olof@lixom.net>

Enable the UniPhier MIO DMAC driver. This is used as the DMA engine
for accelerating the SD/eMMC controller drivers.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Olof Johansson <olof@lixom.net>

swap_readpage() wants to do polling to bring in pages if asked to, but
it doesn't mark the bio as being polled.  Additionally, the looping
around the blk_poll() check isn't correct - if we get a zero return, we
should call io_schedule(), we can't just assume that the bio has
completed.  The regular bio->bi_private check should be used for that.

Link: http://lkml.kernel.org/r/e15243a8-2cdf-c32c-ecee-f289377c8ef9@kernel.dkSigned-off-by: Jens Axboe <axboe@kernel.dk>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

As per Documentation/process/submitting-patches, Co-developed-by is a
valid signature.

This commit removes the warning.

Link: http://lkml.kernel.org/r/1544808928-20002-3-git-send-email-jorge.ramirez-ortiz@linaro.orgSigned-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Himanshu Jha <himanshujha199640@gmail.com>
Cc: Joe Perches <joe@perches.com>
Cc: Jonathan Cameron <jic23@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Niklas Cassel <niklas.cassel@linaro.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The accepted terminology will be Co-developed-by therefore lose the
capital letter from now on.

Link: http://lkml.kernel.org/r/1544808928-20002-2-git-send-email-jorge.ramirez-ortiz@linaro.orgSigned-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org>
Acked-by: Himanshu Jha <himanshujha199640@gmail.com>
Cc: Jonathan Cameron <jic23@kernel.org>
Cc: Joe Perches <joe@perches.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Niklas Cassel <niklas.cassel@linaro.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

unreferenced object 0xffff808ec6dc5a80 (size 128):
  comm "swapper/0", pid 1, jiffies 4294938063 (age 2560.530s)
  hex dump (first 32 bytes):
    ff ff ff ff 00 00 00 00 6b 6b 6b 6b 6b 6b 6b 6b  ........kkkkkkkk
    6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b  kkkkkkkkkkkkkkkk
  backtrace:
    [<00000000476dcf8c>] kmem_cache_alloc_trace+0x430/0x500
    [<000000004f708d37>] platform_device_register_full+0xbc/0x1e8
    [<000000006c2a7ec7>] acpi_create_platform_device+0x370/0x450
    [<00000000ef135642>] acpi_default_enumeration+0x34/0x78
    [<000000003bd9a052>] acpi_bus_attach+0x2dc/0x3e0
    [<000000003cf4f7f2>] acpi_bus_attach+0x108/0x3e0
    [<000000003cf4f7f2>] acpi_bus_attach+0x108/0x3e0
    [<000000002968643e>] acpi_bus_scan+0xb0/0x110
    [<0000000010dd0bd7>] acpi_scan_init+0x1a8/0x410
    [<00000000965b3c5a>] acpi_init+0x408/0x49c
    [<00000000ed4b9fe2>] do_one_initcall+0x178/0x7f4
    [<00000000a5ac5a74>] kernel_init_freeable+0x9d4/0xa9c
    [<0000000070ea6c15>] kernel_init+0x18/0x138
    [<00000000fb8fff06>] ret_from_fork+0x10/0x1c
    [<0000000041273a0d>] 0xffffffffffffffff

Then, faddr2line pointed out this line,

/*
 * This memory isn't freed when the device is put,
 * I don't have a nice idea for that though.  Conceptually
 * dma_mask in struct device should not be a pointer.
 * See http://thread.gmane.org/gmane.linux.kernel.pci/9081
 */
pdev->dev.dma_mask =
	kmalloc(sizeof(*pdev->dev.dma_mask), GFP_KERNEL);

Since this leak has existed for more than 8 years and it does not
reference other parts of the memory, let kmemleak ignore it, so users
don't need to waste time reporting this in the future.

Link: http://lkml.kernel.org/r/20181206160751.36211-1-cai@gmx.usSigned-off-by: Qian Cai <cai@gmx.us>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "Rafael J . Wysocki" <rafael.j.wysocki@intel.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Multiple filesystems open code lru_to_page().  Rectify this by moving
the macro from mm_inline (which is specific to lru stuff) to the more
generic mm.h header and start using the macro where appropriate.

No functional changes.

Link: http://lkml.kernel.org/r/20181129104810.23361-1-nborisov@suse.com
Link: https://lkml.kernel.org/r/20181129075301.29087-1-nborisov@suse.comSigned-off-by: Nikolay Borisov <nborisov@suse.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Mike Rapoport <rppt@linux.ibm.com>
Acked-by: Pankaj gupta <pagupta@redhat.com>
Acked-by: "Yan, Zheng" <zyan@redhat.com>		[ceph]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This is already done for us internally by the signal machinery.

[akpm@linux-foundation.org: fix fs/buffer.c]
Link: http://lkml.kernel.org/r/20181116002713.8474-7-dave@stgolabs.netSigned-off-by: Davidlohr Bueso <dave@stgolabs.net>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This is already done for us internally by the signal machinery.

Link: http://lkml.kernel.org/r/20181116002713.8474-5-dave@stgolabs.netSigned-off-by: Davidlohr Bueso <dave@stgolabs.net>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This is already done for us internally by the signal machinery.

Link: http://lkml.kernel.org/r/20181116002713.8474-4-dave@stgolabs.netSigned-off-by: Davidlohr Bueso <dave@stgolabs.net>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This is already done for us internally by the signal machinery.

Link: http://lkml.kernel.org/r/20181116002713.8474-3-dave@stgolabs.netSigned-off-by: Davidlohr Bueso <dave@stgolabs.net>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>